Message ID | 1595205759-5825-4-git-send-email-chun-hung.wu@mediatek.com (mailing list archive) |
---|---|
State | Mainlined |
Commit | 88bd652b3c74997bb436adf6131acf445066243e |
Headers | show |
Series | mmc: mediatek: add mmc cqhci support | expand |
On Mon, 2020-07-20 at 08:42 +0800, Chun-Hung Wu wrote: > Support command queue for mt6779 platform. > a. Add msdc_set_busy_timeout() to calculate emmc write timeout. > b. Connect mtk msdc driver to cqhci driver through > host->cq_host->ops = &msdc_cmdq_ops; > c. msdc_cmdq_irq() will link up with cqchi_irq(). Besides, it provides > more irq error messages like RSPCRCERR/CMDTO/DATACRCERR/DATTMO. > d. Select kernel config MMC_CQHCI for MMC_MTK > > Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com> > --- > drivers/mmc/host/Kconfig | 1 + > drivers/mmc/host/mtk-sd.c | 115 ++++++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 116 insertions(+) > Acked-by: Yong Mao <yong.mao@mediatek.com> > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > index 3b706af..9c89a5b 100644 > --- a/drivers/mmc/host/Kconfig > +++ b/drivers/mmc/host/Kconfig > @@ -1009,6 +1009,7 @@ config MMC_MTK > tristate "MediaTek SD/MMC Card Interface support" > depends on HAS_DMA > select REGULATOR > + select MMC_CQHCI > help > This selects the MediaTek(R) Secure digital and Multimedia card Interface. > If you have a machine with a integrated SD/MMC card reader, say Y or M here. > diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c > index 347ed72..e560a06 100644 > --- a/drivers/mmc/host/mtk-sd.c > +++ b/drivers/mmc/host/mtk-sd.c > @@ -31,6 +31,8 @@ > #include <linux/mmc/sdio.h> > #include <linux/mmc/slot-gpio.h> > > +#include "cqhci.h" > + > #define MAX_BD_NUM 1024 > > /*--------------------------------------------------------------------------*/ > @@ -152,6 +154,7 @@ > #define MSDC_INT_DMA_BDCSERR (0x1 << 17) /* W1C */ > #define MSDC_INT_DMA_GPDCSERR (0x1 << 18) /* W1C */ > #define MSDC_INT_DMA_PROTECT (0x1 << 19) /* W1C */ > +#define MSDC_INT_CMDQ (0x1 << 28) /* W1C */ > > /* MSDC_INTEN mask */ > #define MSDC_INTEN_MMCIRQ (0x1 << 0) /* RW */ > @@ -182,6 +185,7 @@ > /* SDC_CFG mask */ > #define SDC_CFG_SDIOINTWKUP (0x1 << 0) /* RW */ > #define SDC_CFG_INSWKUP (0x1 << 1) /* RW */ > +#define SDC_CFG_WRDTOC (0x1fff << 2) /* RW */ > #define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */ > #define SDC_CFG_SDIO (0x1 << 19) /* RW */ > #define SDC_CFG_SDIOIDE (0x1 << 20) /* RW */ > @@ -230,6 +234,7 @@ > #define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */ > > #define MSDC_PATCH_BIT1_CMDTA (0x7 << 3) /* RW */ > +#define MSDC_PB1_BUSY_CHECK_SEL (0x1 << 7) /* RW */ > #define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */ > > #define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */ > @@ -431,9 +436,11 @@ struct msdc_host { > /* cmd response sample selection for HS400 */ > bool hs400_mode; /* current eMMC will run at hs400 mode */ > bool internal_cd; /* Use internal card-detect logic */ > + bool cqhci; /* support eMMC hw cmdq */ > struct msdc_save_para save_para; /* used when gate HCLK */ > struct msdc_tune_para def_tune_para; /* default tune setting */ > struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */ > + struct cqhci_host *cq_host; > }; > > static const struct mtk_mmc_compatible mt8135_compat = { > @@ -764,6 +771,15 @@ static void msdc_set_timeout(struct msdc_host *host, u64 ns, u64 clks) > (u32)(timeout > 255 ? 255 : timeout)); > } > > +static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks) > +{ > + u64 timeout; > + > + timeout = msdc_timeout_cal(host, ns, clks); > + sdr_set_field(host->base + SDC_CFG, SDC_CFG_WRDTOC, > + (u32)(timeout > 8191 ? 8191 : timeout)); > +} > + > static void msdc_gate_clock(struct msdc_host *host) > { > clk_disable_unprepare(host->src_clk_cg); > @@ -1481,6 +1497,34 @@ static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb) > pm_runtime_put_noidle(host->dev); > } > > +static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts) > +{ > + int cmd_err = 0, dat_err = 0; > + > + if (intsts & MSDC_INT_RSPCRCERR) { > + cmd_err = -EILSEQ; > + dev_err(host->dev, "%s: CMD CRC ERR", __func__); > + } else if (intsts & MSDC_INT_CMDTMO) { > + cmd_err = -ETIMEDOUT; > + dev_err(host->dev, "%s: CMD TIMEOUT ERR", __func__); > + } > + > + if (intsts & MSDC_INT_DATCRCERR) { > + dat_err = -EILSEQ; > + dev_err(host->dev, "%s: DATA CRC ERR", __func__); > + } else if (intsts & MSDC_INT_DATTMO) { > + dat_err = -ETIMEDOUT; > + dev_err(host->dev, "%s: DATA TIMEOUT ERR", __func__); > + } > + > + if (cmd_err || dat_err) { > + dev_err(host->dev, "cmd_err = %d, dat_err =%d, intsts = 0x%x", > + cmd_err, dat_err, intsts); > + } > + > + return cqhci_irq(host->mmc, 0, cmd_err, dat_err); > +} > + > static irqreturn_t msdc_irq(int irq, void *dev_id) > { > struct msdc_host *host = (struct msdc_host *) dev_id; > @@ -1517,6 +1561,14 @@ static irqreturn_t msdc_irq(int irq, void *dev_id) > if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ))) > break; > > + if ((host->mmc->caps2 & MMC_CAP2_CQE) && > + (events & MSDC_INT_CMDQ)) { > + msdc_cmdq_irq(host, events); > + /* clear interrupts */ > + writel(events, host->base + MSDC_INT); > + return IRQ_HANDLED; > + } > + > if (!mrq) { > dev_err(host->dev, > "%s: MRQ=NULL; events=%08X; event_mask=%08X\n", > @@ -2201,6 +2253,36 @@ static int msdc_get_cd(struct mmc_host *mmc) > return !val; > } > > +static void msdc_cqe_enable(struct mmc_host *mmc) > +{ > + struct msdc_host *host = mmc_priv(mmc); > + > + /* enable cmdq irq */ > + writel(MSDC_INT_CMDQ, host->base + MSDC_INTEN); > + /* enable busy check */ > + sdr_set_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL); > + /* default write data / busy timeout 20s */ > + msdc_set_busy_timeout(host, 20 * 1000000000ULL, 0); > + /* default read data timeout 1s */ > + msdc_set_timeout(host, 1000000000ULL, 0); > +} > + > +void msdc_cqe_disable(struct mmc_host *mmc, bool recovery) > +{ > + struct msdc_host *host = mmc_priv(mmc); > + > + /* disable cmdq irq */ > + sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INT_CMDQ); > + /* disable busy check */ > + sdr_clr_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL); > + > + if (recovery) { > + sdr_set_field(host->base + MSDC_DMA_CTRL, > + MSDC_DMA_CTRL_STOP, 1); > + msdc_reset_hw(host); > + } > +} > + > static const struct mmc_host_ops mt_msdc_ops = { > .post_req = msdc_post_req, > .pre_req = msdc_pre_req, > @@ -2217,6 +2299,11 @@ static int msdc_get_cd(struct mmc_host *mmc) > .hw_reset = msdc_hw_reset, > }; > > +static const struct cqhci_host_ops msdc_cmdq_ops = { > + .enable = msdc_cqe_enable, > + .disable = msdc_cqe_disable, > +}; > + > static void msdc_of_property_parse(struct platform_device *pdev, > struct msdc_host *host) > { > @@ -2237,6 +2324,12 @@ static void msdc_of_property_parse(struct platform_device *pdev, > host->hs400_cmd_resp_sel_rising = true; > else > host->hs400_cmd_resp_sel_rising = false; > + > + if (of_property_read_bool(pdev->dev.of_node, > + "supports-cqe")) > + host->cqhci = true; > + else > + host->cqhci = false; > } > > static int msdc_drv_probe(struct platform_device *pdev) > @@ -2352,6 +2445,8 @@ static int msdc_drv_probe(struct platform_device *pdev) > mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD; > > mmc->caps |= MMC_CAP_CMD23; > + if (host->cqhci) > + mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD; > /* MMC core transfer sizes tunable parameters */ > mmc->max_segs = MAX_BD_NUM; > if (host->dev_comp->support_64g) > @@ -2367,6 +2462,26 @@ static int msdc_drv_probe(struct platform_device *pdev) > host->dma_mask = DMA_BIT_MASK(32); > mmc_dev(mmc)->dma_mask = &host->dma_mask; > > + if (mmc->caps2 & MMC_CAP2_CQE) { > + host->cq_host = devm_kzalloc(host->mmc->parent, > + sizeof(*host->cq_host), > + GFP_KERNEL); > + if (!host->cq_host) { > + ret = -ENOMEM; > + goto host_free; > + } > + host->cq_host->caps |= CQHCI_TASK_DESC_SZ_128; > + host->cq_host->mmio = host->base + 0x800; > + host->cq_host->ops = &msdc_cmdq_ops; > + ret = cqhci_init(host->cq_host, mmc, true); > + if (ret) > + goto host_free; > + mmc->max_segs = 128; > + /* cqhci 16bit length */ > + /* 0 size, means 65536 so we don't have to -1 here */ > + mmc->max_seg_size = 64 * 1024; > + } > + > host->timeout_clks = 3 * 1048576; > host->dma.gpd = dma_alloc_coherent(&pdev->dev, > 2 * sizeof(struct mt_gpdma_desc),
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 3b706af..9c89a5b 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -1009,6 +1009,7 @@ config MMC_MTK tristate "MediaTek SD/MMC Card Interface support" depends on HAS_DMA select REGULATOR + select MMC_CQHCI help This selects the MediaTek(R) Secure digital and Multimedia card Interface. If you have a machine with a integrated SD/MMC card reader, say Y or M here. diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index 347ed72..e560a06 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -31,6 +31,8 @@ #include <linux/mmc/sdio.h> #include <linux/mmc/slot-gpio.h> +#include "cqhci.h" + #define MAX_BD_NUM 1024 /*--------------------------------------------------------------------------*/ @@ -152,6 +154,7 @@ #define MSDC_INT_DMA_BDCSERR (0x1 << 17) /* W1C */ #define MSDC_INT_DMA_GPDCSERR (0x1 << 18) /* W1C */ #define MSDC_INT_DMA_PROTECT (0x1 << 19) /* W1C */ +#define MSDC_INT_CMDQ (0x1 << 28) /* W1C */ /* MSDC_INTEN mask */ #define MSDC_INTEN_MMCIRQ (0x1 << 0) /* RW */ @@ -182,6 +185,7 @@ /* SDC_CFG mask */ #define SDC_CFG_SDIOINTWKUP (0x1 << 0) /* RW */ #define SDC_CFG_INSWKUP (0x1 << 1) /* RW */ +#define SDC_CFG_WRDTOC (0x1fff << 2) /* RW */ #define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */ #define SDC_CFG_SDIO (0x1 << 19) /* RW */ #define SDC_CFG_SDIOIDE (0x1 << 20) /* RW */ @@ -230,6 +234,7 @@ #define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */ #define MSDC_PATCH_BIT1_CMDTA (0x7 << 3) /* RW */ +#define MSDC_PB1_BUSY_CHECK_SEL (0x1 << 7) /* RW */ #define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */ #define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */ @@ -431,9 +436,11 @@ struct msdc_host { /* cmd response sample selection for HS400 */ bool hs400_mode; /* current eMMC will run at hs400 mode */ bool internal_cd; /* Use internal card-detect logic */ + bool cqhci; /* support eMMC hw cmdq */ struct msdc_save_para save_para; /* used when gate HCLK */ struct msdc_tune_para def_tune_para; /* default tune setting */ struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */ + struct cqhci_host *cq_host; }; static const struct mtk_mmc_compatible mt8135_compat = { @@ -764,6 +771,15 @@ static void msdc_set_timeout(struct msdc_host *host, u64 ns, u64 clks) (u32)(timeout > 255 ? 255 : timeout)); } +static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks) +{ + u64 timeout; + + timeout = msdc_timeout_cal(host, ns, clks); + sdr_set_field(host->base + SDC_CFG, SDC_CFG_WRDTOC, + (u32)(timeout > 8191 ? 8191 : timeout)); +} + static void msdc_gate_clock(struct msdc_host *host) { clk_disable_unprepare(host->src_clk_cg); @@ -1481,6 +1497,34 @@ static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb) pm_runtime_put_noidle(host->dev); } +static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts) +{ + int cmd_err = 0, dat_err = 0; + + if (intsts & MSDC_INT_RSPCRCERR) { + cmd_err = -EILSEQ; + dev_err(host->dev, "%s: CMD CRC ERR", __func__); + } else if (intsts & MSDC_INT_CMDTMO) { + cmd_err = -ETIMEDOUT; + dev_err(host->dev, "%s: CMD TIMEOUT ERR", __func__); + } + + if (intsts & MSDC_INT_DATCRCERR) { + dat_err = -EILSEQ; + dev_err(host->dev, "%s: DATA CRC ERR", __func__); + } else if (intsts & MSDC_INT_DATTMO) { + dat_err = -ETIMEDOUT; + dev_err(host->dev, "%s: DATA TIMEOUT ERR", __func__); + } + + if (cmd_err || dat_err) { + dev_err(host->dev, "cmd_err = %d, dat_err =%d, intsts = 0x%x", + cmd_err, dat_err, intsts); + } + + return cqhci_irq(host->mmc, 0, cmd_err, dat_err); +} + static irqreturn_t msdc_irq(int irq, void *dev_id) { struct msdc_host *host = (struct msdc_host *) dev_id; @@ -1517,6 +1561,14 @@ static irqreturn_t msdc_irq(int irq, void *dev_id) if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ))) break; + if ((host->mmc->caps2 & MMC_CAP2_CQE) && + (events & MSDC_INT_CMDQ)) { + msdc_cmdq_irq(host, events); + /* clear interrupts */ + writel(events, host->base + MSDC_INT); + return IRQ_HANDLED; + } + if (!mrq) { dev_err(host->dev, "%s: MRQ=NULL; events=%08X; event_mask=%08X\n", @@ -2201,6 +2253,36 @@ static int msdc_get_cd(struct mmc_host *mmc) return !val; } +static void msdc_cqe_enable(struct mmc_host *mmc) +{ + struct msdc_host *host = mmc_priv(mmc); + + /* enable cmdq irq */ + writel(MSDC_INT_CMDQ, host->base + MSDC_INTEN); + /* enable busy check */ + sdr_set_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL); + /* default write data / busy timeout 20s */ + msdc_set_busy_timeout(host, 20 * 1000000000ULL, 0); + /* default read data timeout 1s */ + msdc_set_timeout(host, 1000000000ULL, 0); +} + +void msdc_cqe_disable(struct mmc_host *mmc, bool recovery) +{ + struct msdc_host *host = mmc_priv(mmc); + + /* disable cmdq irq */ + sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INT_CMDQ); + /* disable busy check */ + sdr_clr_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL); + + if (recovery) { + sdr_set_field(host->base + MSDC_DMA_CTRL, + MSDC_DMA_CTRL_STOP, 1); + msdc_reset_hw(host); + } +} + static const struct mmc_host_ops mt_msdc_ops = { .post_req = msdc_post_req, .pre_req = msdc_pre_req, @@ -2217,6 +2299,11 @@ static int msdc_get_cd(struct mmc_host *mmc) .hw_reset = msdc_hw_reset, }; +static const struct cqhci_host_ops msdc_cmdq_ops = { + .enable = msdc_cqe_enable, + .disable = msdc_cqe_disable, +}; + static void msdc_of_property_parse(struct platform_device *pdev, struct msdc_host *host) { @@ -2237,6 +2324,12 @@ static void msdc_of_property_parse(struct platform_device *pdev, host->hs400_cmd_resp_sel_rising = true; else host->hs400_cmd_resp_sel_rising = false; + + if (of_property_read_bool(pdev->dev.of_node, + "supports-cqe")) + host->cqhci = true; + else + host->cqhci = false; } static int msdc_drv_probe(struct platform_device *pdev) @@ -2352,6 +2445,8 @@ static int msdc_drv_probe(struct platform_device *pdev) mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD; mmc->caps |= MMC_CAP_CMD23; + if (host->cqhci) + mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD; /* MMC core transfer sizes tunable parameters */ mmc->max_segs = MAX_BD_NUM; if (host->dev_comp->support_64g) @@ -2367,6 +2462,26 @@ static int msdc_drv_probe(struct platform_device *pdev) host->dma_mask = DMA_BIT_MASK(32); mmc_dev(mmc)->dma_mask = &host->dma_mask; + if (mmc->caps2 & MMC_CAP2_CQE) { + host->cq_host = devm_kzalloc(host->mmc->parent, + sizeof(*host->cq_host), + GFP_KERNEL); + if (!host->cq_host) { + ret = -ENOMEM; + goto host_free; + } + host->cq_host->caps |= CQHCI_TASK_DESC_SZ_128; + host->cq_host->mmio = host->base + 0x800; + host->cq_host->ops = &msdc_cmdq_ops; + ret = cqhci_init(host->cq_host, mmc, true); + if (ret) + goto host_free; + mmc->max_segs = 128; + /* cqhci 16bit length */ + /* 0 size, means 65536 so we don't have to -1 here */ + mmc->max_seg_size = 64 * 1024; + } + host->timeout_clks = 3 * 1048576; host->dma.gpd = dma_alloc_coherent(&pdev->dev, 2 * sizeof(struct mt_gpdma_desc),
Support command queue for mt6779 platform. a. Add msdc_set_busy_timeout() to calculate emmc write timeout. b. Connect mtk msdc driver to cqhci driver through host->cq_host->ops = &msdc_cmdq_ops; c. msdc_cmdq_irq() will link up with cqchi_irq(). Besides, it provides more irq error messages like RSPCRCERR/CMDTO/DATACRCERR/DATTMO. d. Select kernel config MMC_CQHCI for MMC_MTK Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com> --- drivers/mmc/host/Kconfig | 1 + drivers/mmc/host/mtk-sd.c | 115 ++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 116 insertions(+)