| Message ID | 20200720105846.367776-1-jagan@amarulasolutions.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v3] ARM: dts: rockchip: Add usb host0 ohci node for rk3288 | expand |
Hi Jaganm Am Montag, 20. Juli 2020, 12:58:46 CEST schrieb Jagan Teki: > rk3288 and rk3288w have a usb host0 ohci controller. > > Although rk3288 ohci doesn't actually work on hardware, but > rk3288w ohci can work well. > > So add usb host0 ohci node in rk3288 dtsi and the quirk in > ohci platform driver will disable ohci on rk3288. If I remember the discussion correctly, we expect the board dts or the bootloader to enable the ohci, right? So that block go away ... just making sure, I don't remember untrue stuff ;-) Heiko > Cc: William Wu <william.wu@rock-chips.com> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > Changes for v3: > - none > > arch/arm/boot/dts/rk3288.dtsi | 11 ++++++++++- > 1 file changed, 10 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi > index 0cd88774db95..f0774d9afb67 100644 > --- a/arch/arm/boot/dts/rk3288.dtsi > +++ b/arch/arm/boot/dts/rk3288.dtsi > @@ -614,7 +614,16 @@ usb_host0_ehci: usb@ff500000 { > status = "disabled"; > }; > > - /* NOTE: ohci@ff520000 doesn't actually work on hardware */ > + /* NOTE: doesn't work on RK3288, but fixed on RK3288W */ > + usb_host0_ohci: usb@ff520000 { > + compatible = "generic-ohci"; > + reg = <0x0 0xff520000 0x0 0x100>; > + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cru HCLK_USBHOST0>; > + phys = <&usbphy1>; > + phy-names = "usb"; > + status = "disabled"; > + }; > > usb_host1: usb@ff540000 { > compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", >
Hi Heiko, On Thu, Jul 23, 2020 at 12:04 AM Heiko Stuebner <heiko@sntech.de> wrote: > > Hi Jaganm > > Am Montag, 20. Juli 2020, 12:58:46 CEST schrieb Jagan Teki: > > rk3288 and rk3288w have a usb host0 ohci controller. > > > > Although rk3288 ohci doesn't actually work on hardware, but > > rk3288w ohci can work well. > > > > So add usb host0 ohci node in rk3288 dtsi and the quirk in > > ohci platform driver will disable ohci on rk3288. > > If I remember the discussion correctly, we expect the board dts > or the bootloader to enable the ohci, right? > So that block go away ... just making sure, I don't remember > untrue stuff ;-) Our (with Robin) initial discussion [1] is to manage OHCI enablement in the bootloader but since it requires many checks at bootloader level we finally rely on board dts to enable it as normal. [1] https://lkml.org/lkml/2020/7/3/424 Jagan.
Am Mittwoch, 22. Juli 2020, 20:46:55 CEST schrieb Jagan Teki: > Hi Heiko, > > On Thu, Jul 23, 2020 at 12:04 AM Heiko Stuebner <heiko@sntech.de> wrote: > > > > Hi Jaganm > > > > Am Montag, 20. Juli 2020, 12:58:46 CEST schrieb Jagan Teki: > > > rk3288 and rk3288w have a usb host0 ohci controller. > > > > > > Although rk3288 ohci doesn't actually work on hardware, but > > > rk3288w ohci can work well. > > > > > > So add usb host0 ohci node in rk3288 dtsi and the quirk in > > > ohci platform driver will disable ohci on rk3288. > > > > If I remember the discussion correctly, we expect the board dts > > or the bootloader to enable the ohci, right? > > So that block go away ... just making sure, I don't remember > > untrue stuff ;-) > > Our (with Robin) initial discussion [1] is to manage OHCI enablement > in the bootloader but since it requires many checks at bootloader > level we finally rely on board dts to enable it as normal. ok, so I'll just drop this paragraph when applying. > > [1] https://lkml.org/lkml/2020/7/3/424 > > Jagan. >
On Mon, 20 Jul 2020 16:28:46 +0530, Jagan Teki wrote: > rk3288 and rk3288w have a usb host0 ohci controller. > > Although rk3288 ohci doesn't actually work on hardware, but > rk3288w ohci can work well. > > So add usb host0 ohci node in rk3288 dtsi and the quirk in > ohci platform driver will disable ohci on rk3288. Applied, thanks! [1/1] ARM: dts: rockchip: Add usb host0 ohci node for rk3288 commit: 82540defdd9cfc491f564ffb8d01911966636bc7 Best regards,
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 0cd88774db95..f0774d9afb67 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -614,7 +614,16 @@ usb_host0_ehci: usb@ff500000 { status = "disabled"; }; - /* NOTE: ohci@ff520000 doesn't actually work on hardware */ + /* NOTE: doesn't work on RK3288, but fixed on RK3288W */ + usb_host0_ohci: usb@ff520000 { + compatible = "generic-ohci"; + reg = <0x0 0xff520000 0x0 0x100>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_USBHOST0>; + phys = <&usbphy1>; + phy-names = "usb"; + status = "disabled"; + }; usb_host1: usb@ff540000 { compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
rk3288 and rk3288w have a usb host0 ohci controller. Although rk3288 ohci doesn't actually work on hardware, but rk3288w ohci can work well. So add usb host0 ohci node in rk3288 dtsi and the quirk in ohci platform driver will disable ohci on rk3288. Cc: William Wu <william.wu@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v3: - none arch/arm/boot/dts/rk3288.dtsi | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)