| Message ID | 1594921495-519-1-git-send-email-sumeet.r.pawnikar@intel.com (mailing list archive) |
|---|---|
| State | Mainlined, archived |
| Headers | show |
| Series | [v3] powercap: Add Power Limit4 support | expand |
On Thu, Jul 16, 2020 at 7:38 PM Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> wrote: > > Modern Intel Mobile platforms support power limit4 (PL4), which is > the SoC package level maximum power limit (in Watts). It can be used > to preemptively limits potential SoC power to prevent power spikes > from tripping the power adapter and battery over-current protection. > This patch enables this feature by exposing package level peak power > capping control to userspace via RAPL sysfs interface. With this, > application like DTPF can modify PL4 power limit, the similar way > of other package power limit (PL1). > As this feature is not tested on previous generations, here it is > enabled only for the platform that has been verified to work, > for safety concerns. Queued up as 5.9 material -> > Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> > Co-developed-by: Zhang Rui <rui.zhang@intel.com> > Signed-off-by: Zhang Rui <rui.zhang@intel.com> -> with this tag removed, because the only case in which you can include an S-o-b from someone else is when you also add a From: pointing to that person. IOW, you add a From: with a matching S-o-b from someone else and you can add your own S-o-b to that. In this particular case, the C-d-b tag is sufficient to make a record of somebody else's contribution to a patch carrying a From: header that points to you (ie. your patch). > Reviewed-and-tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> > --- > Changes in v3: > - Addressed review comments from Srinivas. > > Changes in v2: > - Addressed review comments from Rafael. > - Made the commit message more clearer. > - Updated powercap documentation. > --- > Documentation/power/powercap/powercap.rst | 15 +++++--- > drivers/powercap/intel_rapl_common.c | 54 +++++++++++++++++++++++++++-- > drivers/powercap/intel_rapl_msr.c | 15 ++++++++ > include/linux/intel_rapl.h | 5 ++- > 4 files changed, 81 insertions(+), 8 deletions(-) > > diff --git a/Documentation/power/powercap/powercap.rst b/Documentation/power/powercap/powercap.rst > index 7ae3b44c7624..e75d12596dac 100644 > --- a/Documentation/power/powercap/powercap.rst > +++ b/Documentation/power/powercap/powercap.rst > @@ -167,11 +167,13 @@ For example:: > package-0 > --------- > > -The Intel RAPL technology allows two constraints, short term and long term, > -with two different time windows to be applied to each power zone. Thus for > -each zone there are 2 attributes representing the constraint names, 2 power > -limits and 2 attributes representing the sizes of the time windows. Such that, > -constraint_j_* attributes correspond to the jth constraint (j = 0,1). > +Depending on different power zones, the Intel RAPL technology allows > +one or multiple constraints like short term, long term and peak power, > +with different time windows to be applied to each power zone. > +All the zones contain attributes representing the constraint names, > +power limits and the sizes of the time windows. Note that time window > +is not applicable to peak power. Here, constraint_j_* attributes > +correspond to the jth constraint (j = 0,1,2). > > For example:: > > @@ -181,6 +183,9 @@ For example:: > constraint_1_name > constraint_1_power_limit_uw > constraint_1_time_window_us > + constraint_2_name > + constraint_2_power_limit_uw > + constraint_2_time_window_us > > Power Zone Attributes > ===================== > diff --git a/drivers/powercap/intel_rapl_common.c b/drivers/powercap/intel_rapl_common.c > index 61a63a16b5e7..a8bcc58d61f0 100644 > --- a/drivers/powercap/intel_rapl_common.c > +++ b/drivers/powercap/intel_rapl_common.c > @@ -39,6 +39,8 @@ > #define POWER_HIGH_LOCK BIT_ULL(63) > #define POWER_LOW_LOCK BIT(31) > > +#define POWER_LIMIT4_MASK 0x1FFF > + > #define TIME_WINDOW1_MASK (0x7FULL<<17) > #define TIME_WINDOW2_MASK (0x7FULL<<49) > > @@ -82,6 +84,7 @@ enum unit_type { > > static const char pl1_name[] = "long_term"; > static const char pl2_name[] = "short_term"; > +static const char pl4_name[] = "peak_power"; > > #define power_zone_to_rapl_domain(_zone) \ > container_of(_zone, struct rapl_domain, power_zone) > @@ -337,6 +340,9 @@ static int set_power_limit(struct powercap_zone *power_zone, int cid, > case PL2_ENABLE: > rapl_write_data_raw(rd, POWER_LIMIT2, power_limit); > break; > + case PL4_ENABLE: > + rapl_write_data_raw(rd, POWER_LIMIT4, power_limit); > + break; > default: > ret = -EINVAL; > } > @@ -371,6 +377,9 @@ static int get_current_power_limit(struct powercap_zone *power_zone, int cid, > case PL2_ENABLE: > prim = POWER_LIMIT2; > break; > + case PL4_ENABLE: > + prim = POWER_LIMIT4; > + break; > default: > put_online_cpus(); > return -EINVAL; > @@ -440,6 +449,13 @@ static int get_time_window(struct powercap_zone *power_zone, int cid, > case PL2_ENABLE: > ret = rapl_read_data_raw(rd, TIME_WINDOW2, true, &val); > break; > + case PL4_ENABLE: > + /* > + * Time window parameter is not applicable for PL4 entry > + * so assigining '0' as default value. > + */ > + val = 0; > + break; > default: > put_online_cpus(); > return -EINVAL; > @@ -483,6 +499,9 @@ static int get_max_power(struct powercap_zone *power_zone, int id, u64 *data) > case PL2_ENABLE: > prim = MAX_POWER; > break; > + case PL4_ENABLE: > + prim = MAX_POWER; > + break; > default: > put_online_cpus(); > return -EINVAL; > @@ -492,6 +511,10 @@ static int get_max_power(struct powercap_zone *power_zone, int id, u64 *data) > else > *data = val; > > + /* As a generalization rule, PL4 would be around two times PL2. */ > + if (rd->rpl[id].prim_id == PL4_ENABLE) > + *data = *data * 2; > + > put_online_cpus(); > > return ret; > @@ -524,12 +547,22 @@ static void rapl_init_domains(struct rapl_package *rp) > rd->id = i; > rd->rpl[0].prim_id = PL1_ENABLE; > rd->rpl[0].name = pl1_name; > - /* some domain may support two power limits */ > - if (rp->priv->limits[i] == 2) { > + > + /* > + * The PL2 power domain is applicable for limits two > + * and limits three > + */ > + if (rp->priv->limits[i] >= 2) { > rd->rpl[1].prim_id = PL2_ENABLE; > rd->rpl[1].name = pl2_name; > } > > + /* Enable PL4 domain if the total power limits are three */ > + if (rp->priv->limits[i] == 3) { > + rd->rpl[2].prim_id = PL4_ENABLE; > + rd->rpl[2].name = pl4_name; > + } > + > for (j = 0; j < RAPL_DOMAIN_REG_MAX; j++) > rd->regs[j] = rp->priv->regs[i][j]; > > @@ -587,6 +620,8 @@ static u64 rapl_unit_xlate(struct rapl_domain *rd, enum unit_type type, > RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0), > PRIMITIVE_INFO_INIT(POWER_LIMIT2, POWER_LIMIT2_MASK, 32, > RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0), > + PRIMITIVE_INFO_INIT(POWER_LIMIT4, POWER_LIMIT4_MASK, 0, > + RAPL_DOMAIN_REG_PL4, POWER_UNIT, 0), > PRIMITIVE_INFO_INIT(FW_LOCK, POWER_LOW_LOCK, 31, > RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), > PRIMITIVE_INFO_INIT(PL1_ENABLE, POWER_LIMIT1_ENABLE, 15, > @@ -597,6 +632,8 @@ static u64 rapl_unit_xlate(struct rapl_domain *rd, enum unit_type type, > RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), > PRIMITIVE_INFO_INIT(PL2_CLAMP, POWER_LIMIT2_CLAMP, 48, > RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), > + PRIMITIVE_INFO_INIT(PL4_ENABLE, POWER_LIMIT4_MASK, 0, > + RAPL_DOMAIN_REG_PL4, ARBITRARY_UNIT, 0), > PRIMITIVE_INFO_INIT(TIME_WINDOW1, TIME_WINDOW1_MASK, 17, > RAPL_DOMAIN_REG_LIMIT, TIME_UNIT, 0), > PRIMITIVE_INFO_INIT(TIME_WINDOW2, TIME_WINDOW2_MASK, 49, > @@ -1252,6 +1289,7 @@ void rapl_remove_package(struct rapl_package *rp) > if (find_nr_power_limit(rd) > 1) { > rapl_write_data_raw(rd, PL2_ENABLE, 0); > rapl_write_data_raw(rd, PL2_CLAMP, 0); > + rapl_write_data_raw(rd, PL4_ENABLE, 0); > } > if (rd->id == RAPL_DOMAIN_PACKAGE) { > rd_package = rd; > @@ -1360,6 +1398,13 @@ static void power_limit_state_save(void) > if (ret) > rd->rpl[i].last_power_limit = 0; > break; > + case PL4_ENABLE: > + ret = rapl_read_data_raw(rd, > + POWER_LIMIT4, true, > + &rd->rpl[i].last_power_limit); > + if (ret) > + rd->rpl[i].last_power_limit = 0; > + break; > } > } > } > @@ -1390,6 +1435,11 @@ static void power_limit_state_restore(void) > rapl_write_data_raw(rd, POWER_LIMIT2, > rd->rpl[i].last_power_limit); > break; > + case PL4_ENABLE: > + if (rd->rpl[i].last_power_limit) > + rapl_write_data_raw(rd, POWER_LIMIT4, > + rd->rpl[i].last_power_limit); > + break; > } > } > } > diff --git a/drivers/powercap/intel_rapl_msr.c b/drivers/powercap/intel_rapl_msr.c > index d5487965bdfe..d2a2627507a9 100644 > --- a/drivers/powercap/intel_rapl_msr.c > +++ b/drivers/powercap/intel_rapl_msr.c > @@ -28,6 +28,7 @@ > > /* Local defines */ > #define MSR_PLATFORM_POWER_LIMIT 0x0000065C > +#define MSR_VR_CURRENT_CONFIG 0x00000601 > > /* private data for RAPL MSR Interface */ > static struct rapl_if_priv rapl_msr_priv = { > @@ -123,13 +124,27 @@ static int rapl_msr_write_raw(int cpu, struct reg_action *ra) > return ra->err; > } > > +/* List of verified CPUs. */ > +static const struct x86_cpu_id pl4_support_ids[] = { > + { X86_VENDOR_INTEL, 6, INTEL_FAM6_TIGERLAKE_L, X86_FEATURE_ANY }, > + {} > +}; > + > static int rapl_msr_probe(struct platform_device *pdev) > { > + const struct x86_cpu_id *id = x86_match_cpu(pl4_support_ids); > int ret; > > rapl_msr_priv.read_raw = rapl_msr_read_raw; > rapl_msr_priv.write_raw = rapl_msr_write_raw; > > + if (id) { > + rapl_msr_priv.limits[RAPL_DOMAIN_PACKAGE] = 3; > + rapl_msr_priv.regs[RAPL_DOMAIN_PACKAGE][RAPL_DOMAIN_REG_PL4] = > + MSR_VR_CURRENT_CONFIG; > + pr_info("PL4 support detected.\n"); > + } > + > rapl_msr_priv.control_type = powercap_register_control_type(NULL, "intel-rapl", NULL); > if (IS_ERR(rapl_msr_priv.control_type)) { > pr_debug("failed to register powercap control_type.\n"); > diff --git a/include/linux/intel_rapl.h b/include/linux/intel_rapl.h > index efb3ce892c20..3582176a1eca 100644 > --- a/include/linux/intel_rapl.h > +++ b/include/linux/intel_rapl.h > @@ -29,6 +29,7 @@ enum rapl_domain_reg_id { > RAPL_DOMAIN_REG_PERF, > RAPL_DOMAIN_REG_POLICY, > RAPL_DOMAIN_REG_INFO, > + RAPL_DOMAIN_REG_PL4, > RAPL_DOMAIN_REG_MAX, > }; > > @@ -38,12 +39,14 @@ enum rapl_primitives { > ENERGY_COUNTER, > POWER_LIMIT1, > POWER_LIMIT2, > + POWER_LIMIT4, > FW_LOCK, > > PL1_ENABLE, /* power limit 1, aka long term */ > PL1_CLAMP, /* allow frequency to go below OS request */ > PL2_ENABLE, /* power limit 2, aka short term, instantaneous */ > PL2_CLAMP, > + PL4_ENABLE, /* power limit 4, aka max peak power */ > > TIME_WINDOW1, /* long term */ > TIME_WINDOW2, /* short term */ > @@ -65,7 +68,7 @@ struct rapl_domain_data { > unsigned long timestamp; > }; > > -#define NR_POWER_LIMITS (2) > +#define NR_POWER_LIMITS (3) > struct rapl_power_limit { > struct powercap_zone_constraint *constraint; > int prim_id; /* primitive ID used to enable */ > -- > 1.7.9.5 >
On Mon, Jul 27, 2020 at 01:46:12PM +0200, Rafael J. Wysocki wrote: > On Thu, Jul 16, 2020 at 7:38 PM Sumeet Pawnikar > <sumeet.r.pawnikar@intel.com> wrote: > > > > Modern Intel Mobile platforms support power limit4 (PL4), which is > > the SoC package level maximum power limit (in Watts). It can be used > > to preemptively limits potential SoC power to prevent power spikes > > from tripping the power adapter and battery over-current protection. > > This patch enables this feature by exposing package level peak power > > capping control to userspace via RAPL sysfs interface. With this, > > application like DTPF can modify PL4 power limit, the similar way > > of other package power limit (PL1). > > As this feature is not tested on previous generations, here it is > > enabled only for the platform that has been verified to work, > > for safety concerns. > > Queued up as 5.9 material -> > > > Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> > > Co-developed-by: Zhang Rui <rui.zhang@intel.com> > > Signed-off-by: Zhang Rui <rui.zhang@intel.com> > > -> with this tag removed, because the only case in which you can > include an S-o-b from someone else is when you also add a From: > pointing to that person. IOW, you add a From: with a matching S-o-b > from someone else and you can add your own S-o-b to that. > > In this particular case, the C-d-b tag is sufficient to make a record > of somebody else's contribution to a patch carrying a From: header > that points to you (ie. your patch). Rafael, it looks like it contradicts documentation. I mean your amendment. SoB is specifically required to be coupled with Co-developed-by. That said, both or none are acceptable. (I don't consider the chain of SoB when it goes thru maintainers)
On Mon, Jul 27, 2020 at 2:13 PM Shevchenko, Andriy <andriy.shevchenko@intel.com> wrote: > > On Mon, Jul 27, 2020 at 01:46:12PM +0200, Rafael J. Wysocki wrote: > > On Thu, Jul 16, 2020 at 7:38 PM Sumeet Pawnikar > > <sumeet.r.pawnikar@intel.com> wrote: > > > > > > Modern Intel Mobile platforms support power limit4 (PL4), which is > > > the SoC package level maximum power limit (in Watts). It can be used > > > to preemptively limits potential SoC power to prevent power spikes > > > from tripping the power adapter and battery over-current protection. > > > This patch enables this feature by exposing package level peak power > > > capping control to userspace via RAPL sysfs interface. With this, > > > application like DTPF can modify PL4 power limit, the similar way > > > of other package power limit (PL1). > > > As this feature is not tested on previous generations, here it is > > > enabled only for the platform that has been verified to work, > > > for safety concerns. > > > > Queued up as 5.9 material -> > > > > > Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> > > > Co-developed-by: Zhang Rui <rui.zhang@intel.com> > > > Signed-off-by: Zhang Rui <rui.zhang@intel.com> > > > > -> with this tag removed, because the only case in which you can > > include an S-o-b from someone else is when you also add a From: > > pointing to that person. IOW, you add a From: with a matching S-o-b > > from someone else and you can add your own S-o-b to that. > > > > In this particular case, the C-d-b tag is sufficient to make a record > > of somebody else's contribution to a patch carrying a From: header > > that points to you (ie. your patch). > > Rafael, it looks like it contradicts documentation. I mean your amendment. > SoB is specifically required to be coupled with Co-developed-by. That said, > both or none are acceptable. (I don't consider the chain of SoB when it goes > thru maintainers) OK, I stand corrected and so I've added the Rui's S-o-b back to the commit. Thanks!
diff --git a/Documentation/power/powercap/powercap.rst b/Documentation/power/powercap/powercap.rst index 7ae3b44c7624..e75d12596dac 100644 --- a/Documentation/power/powercap/powercap.rst +++ b/Documentation/power/powercap/powercap.rst @@ -167,11 +167,13 @@ For example:: package-0 --------- -The Intel RAPL technology allows two constraints, short term and long term, -with two different time windows to be applied to each power zone. Thus for -each zone there are 2 attributes representing the constraint names, 2 power -limits and 2 attributes representing the sizes of the time windows. Such that, -constraint_j_* attributes correspond to the jth constraint (j = 0,1). +Depending on different power zones, the Intel RAPL technology allows +one or multiple constraints like short term, long term and peak power, +with different time windows to be applied to each power zone. +All the zones contain attributes representing the constraint names, +power limits and the sizes of the time windows. Note that time window +is not applicable to peak power. Here, constraint_j_* attributes +correspond to the jth constraint (j = 0,1,2). For example:: @@ -181,6 +183,9 @@ For example:: constraint_1_name constraint_1_power_limit_uw constraint_1_time_window_us + constraint_2_name + constraint_2_power_limit_uw + constraint_2_time_window_us Power Zone Attributes ===================== diff --git a/drivers/powercap/intel_rapl_common.c b/drivers/powercap/intel_rapl_common.c index 61a63a16b5e7..a8bcc58d61f0 100644 --- a/drivers/powercap/intel_rapl_common.c +++ b/drivers/powercap/intel_rapl_common.c @@ -39,6 +39,8 @@ #define POWER_HIGH_LOCK BIT_ULL(63) #define POWER_LOW_LOCK BIT(31) +#define POWER_LIMIT4_MASK 0x1FFF + #define TIME_WINDOW1_MASK (0x7FULL<<17) #define TIME_WINDOW2_MASK (0x7FULL<<49) @@ -82,6 +84,7 @@ enum unit_type { static const char pl1_name[] = "long_term"; static const char pl2_name[] = "short_term"; +static const char pl4_name[] = "peak_power"; #define power_zone_to_rapl_domain(_zone) \ container_of(_zone, struct rapl_domain, power_zone) @@ -337,6 +340,9 @@ static int set_power_limit(struct powercap_zone *power_zone, int cid, case PL2_ENABLE: rapl_write_data_raw(rd, POWER_LIMIT2, power_limit); break; + case PL4_ENABLE: + rapl_write_data_raw(rd, POWER_LIMIT4, power_limit); + break; default: ret = -EINVAL; } @@ -371,6 +377,9 @@ static int get_current_power_limit(struct powercap_zone *power_zone, int cid, case PL2_ENABLE: prim = POWER_LIMIT2; break; + case PL4_ENABLE: + prim = POWER_LIMIT4; + break; default: put_online_cpus(); return -EINVAL; @@ -440,6 +449,13 @@ static int get_time_window(struct powercap_zone *power_zone, int cid, case PL2_ENABLE: ret = rapl_read_data_raw(rd, TIME_WINDOW2, true, &val); break; + case PL4_ENABLE: + /* + * Time window parameter is not applicable for PL4 entry + * so assigining '0' as default value. + */ + val = 0; + break; default: put_online_cpus(); return -EINVAL; @@ -483,6 +499,9 @@ static int get_max_power(struct powercap_zone *power_zone, int id, u64 *data) case PL2_ENABLE: prim = MAX_POWER; break; + case PL4_ENABLE: + prim = MAX_POWER; + break; default: put_online_cpus(); return -EINVAL; @@ -492,6 +511,10 @@ static int get_max_power(struct powercap_zone *power_zone, int id, u64 *data) else *data = val; + /* As a generalization rule, PL4 would be around two times PL2. */ + if (rd->rpl[id].prim_id == PL4_ENABLE) + *data = *data * 2; + put_online_cpus(); return ret; @@ -524,12 +547,22 @@ static void rapl_init_domains(struct rapl_package *rp) rd->id = i; rd->rpl[0].prim_id = PL1_ENABLE; rd->rpl[0].name = pl1_name; - /* some domain may support two power limits */ - if (rp->priv->limits[i] == 2) { + + /* + * The PL2 power domain is applicable for limits two + * and limits three + */ + if (rp->priv->limits[i] >= 2) { rd->rpl[1].prim_id = PL2_ENABLE; rd->rpl[1].name = pl2_name; } + /* Enable PL4 domain if the total power limits are three */ + if (rp->priv->limits[i] == 3) { + rd->rpl[2].prim_id = PL4_ENABLE; + rd->rpl[2].name = pl4_name; + } + for (j = 0; j < RAPL_DOMAIN_REG_MAX; j++) rd->regs[j] = rp->priv->regs[i][j]; @@ -587,6 +620,8 @@ static u64 rapl_unit_xlate(struct rapl_domain *rd, enum unit_type type, RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0), PRIMITIVE_INFO_INIT(POWER_LIMIT2, POWER_LIMIT2_MASK, 32, RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0), + PRIMITIVE_INFO_INIT(POWER_LIMIT4, POWER_LIMIT4_MASK, 0, + RAPL_DOMAIN_REG_PL4, POWER_UNIT, 0), PRIMITIVE_INFO_INIT(FW_LOCK, POWER_LOW_LOCK, 31, RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), PRIMITIVE_INFO_INIT(PL1_ENABLE, POWER_LIMIT1_ENABLE, 15, @@ -597,6 +632,8 @@ static u64 rapl_unit_xlate(struct rapl_domain *rd, enum unit_type type, RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), PRIMITIVE_INFO_INIT(PL2_CLAMP, POWER_LIMIT2_CLAMP, 48, RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), + PRIMITIVE_INFO_INIT(PL4_ENABLE, POWER_LIMIT4_MASK, 0, + RAPL_DOMAIN_REG_PL4, ARBITRARY_UNIT, 0), PRIMITIVE_INFO_INIT(TIME_WINDOW1, TIME_WINDOW1_MASK, 17, RAPL_DOMAIN_REG_LIMIT, TIME_UNIT, 0), PRIMITIVE_INFO_INIT(TIME_WINDOW2, TIME_WINDOW2_MASK, 49, @@ -1252,6 +1289,7 @@ void rapl_remove_package(struct rapl_package *rp) if (find_nr_power_limit(rd) > 1) { rapl_write_data_raw(rd, PL2_ENABLE, 0); rapl_write_data_raw(rd, PL2_CLAMP, 0); + rapl_write_data_raw(rd, PL4_ENABLE, 0); } if (rd->id == RAPL_DOMAIN_PACKAGE) { rd_package = rd; @@ -1360,6 +1398,13 @@ static void power_limit_state_save(void) if (ret) rd->rpl[i].last_power_limit = 0; break; + case PL4_ENABLE: + ret = rapl_read_data_raw(rd, + POWER_LIMIT4, true, + &rd->rpl[i].last_power_limit); + if (ret) + rd->rpl[i].last_power_limit = 0; + break; } } } @@ -1390,6 +1435,11 @@ static void power_limit_state_restore(void) rapl_write_data_raw(rd, POWER_LIMIT2, rd->rpl[i].last_power_limit); break; + case PL4_ENABLE: + if (rd->rpl[i].last_power_limit) + rapl_write_data_raw(rd, POWER_LIMIT4, + rd->rpl[i].last_power_limit); + break; } } } diff --git a/drivers/powercap/intel_rapl_msr.c b/drivers/powercap/intel_rapl_msr.c index d5487965bdfe..d2a2627507a9 100644 --- a/drivers/powercap/intel_rapl_msr.c +++ b/drivers/powercap/intel_rapl_msr.c @@ -28,6 +28,7 @@ /* Local defines */ #define MSR_PLATFORM_POWER_LIMIT 0x0000065C +#define MSR_VR_CURRENT_CONFIG 0x00000601 /* private data for RAPL MSR Interface */ static struct rapl_if_priv rapl_msr_priv = { @@ -123,13 +124,27 @@ static int rapl_msr_write_raw(int cpu, struct reg_action *ra) return ra->err; } +/* List of verified CPUs. */ +static const struct x86_cpu_id pl4_support_ids[] = { + { X86_VENDOR_INTEL, 6, INTEL_FAM6_TIGERLAKE_L, X86_FEATURE_ANY }, + {} +}; + static int rapl_msr_probe(struct platform_device *pdev) { + const struct x86_cpu_id *id = x86_match_cpu(pl4_support_ids); int ret; rapl_msr_priv.read_raw = rapl_msr_read_raw; rapl_msr_priv.write_raw = rapl_msr_write_raw; + if (id) { + rapl_msr_priv.limits[RAPL_DOMAIN_PACKAGE] = 3; + rapl_msr_priv.regs[RAPL_DOMAIN_PACKAGE][RAPL_DOMAIN_REG_PL4] = + MSR_VR_CURRENT_CONFIG; + pr_info("PL4 support detected.\n"); + } + rapl_msr_priv.control_type = powercap_register_control_type(NULL, "intel-rapl", NULL); if (IS_ERR(rapl_msr_priv.control_type)) { pr_debug("failed to register powercap control_type.\n"); diff --git a/include/linux/intel_rapl.h b/include/linux/intel_rapl.h index efb3ce892c20..3582176a1eca 100644 --- a/include/linux/intel_rapl.h +++ b/include/linux/intel_rapl.h @@ -29,6 +29,7 @@ enum rapl_domain_reg_id { RAPL_DOMAIN_REG_PERF, RAPL_DOMAIN_REG_POLICY, RAPL_DOMAIN_REG_INFO, + RAPL_DOMAIN_REG_PL4, RAPL_DOMAIN_REG_MAX, }; @@ -38,12 +39,14 @@ enum rapl_primitives { ENERGY_COUNTER, POWER_LIMIT1, POWER_LIMIT2, + POWER_LIMIT4, FW_LOCK, PL1_ENABLE, /* power limit 1, aka long term */ PL1_CLAMP, /* allow frequency to go below OS request */ PL2_ENABLE, /* power limit 2, aka short term, instantaneous */ PL2_CLAMP, + PL4_ENABLE, /* power limit 4, aka max peak power */ TIME_WINDOW1, /* long term */ TIME_WINDOW2, /* short term */ @@ -65,7 +68,7 @@ struct rapl_domain_data { unsigned long timestamp; }; -#define NR_POWER_LIMITS (2) +#define NR_POWER_LIMITS (3) struct rapl_power_limit { struct powercap_zone_constraint *constraint; int prim_id; /* primitive ID used to enable */