| Message ID | 20200723084628.19241-1-lokeshvutla@ti.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | arm64: Initial support for Texas Instrument's J7200 Platform | expand |
On 23/07/2020 11:46, Lokesh Vutla wrote: > This series adds initial support for latest new SoC, J7200, from Texas Instruments. > > The J7200 SoC is a part of the K3 Multicore SoC architecture platform. > It is targeted for for automotive gateway, vehicle compute systems, > Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications. > The SoC aims to meet the complex processing needs of modern embedded products. > > See J7200 Technical Reference Manual (SPRUIU1, June 2020) > for further details: https://www.ti.com/lit/pdf/spruiu1 > > Testing: > - Boot log: https://pastebin.ubuntu.com/p/FvpzWjf7tw/ > - ./scripts/checkpatch --strict > - Few warningns about Line length exceeding 100 columns. > But these are corresponding to comments > - v8make dtbs_check > - DT_SCHEMA_FLAGS="-u" > DT_SCHEMA_FILES="Documentation/devicetree/bindings/arm/ti/k3.yaml" > v8make dtbs_check > - DT_SCHEMA_FLAGS="-u" > DT_SCHEMA_FILES="Documentation/devicetree/bindings/arm/ti/k3.yaml" > v8make dt_binding_check > > Lokesh Vutla (4): > dt-bindings: arm: ti: Add bindings for J7200 SoC > dt-bindings: arm: ti: Convert K3 board/soc bindings to DT schema > arm64: dts: ti: Add support for J7200 SoC > arm64: dts: ti: Add support for J7200 Common Processor Board > > .../devicetree/bindings/arm/ti/k3.txt | 26 --- > .../devicetree/bindings/arm/ti/k3.yaml | 28 +++ > MAINTAINERS | 2 +- > arch/arm64/boot/dts/ti/Makefile | 3 +- > .../dts/ti/k3-j7200-common-proc-board.dts | 64 ++++++ > arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 199 ++++++++++++++++++ > .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 84 ++++++++ > arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 29 +++ > arch/arm64/boot/dts/ti/k3-j7200.dtsi | 165 +++++++++++++++ > 9 files changed, 572 insertions(+), 28 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/arm/ti/k3.txt > create mode 100644 Documentation/devicetree/bindings/arm/ti/k3.yaml > create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts > create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi > create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi > create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi > create mode 100644 arch/arm64/boot/dts/ti/k3-j7200.dtsi > I have networking enabled on top of this series here. ssh://git@bitbucket.itg.ti.com/~x1045550/ti-priv-linux-kernel.git ti-linux-5.4.y-for-next-pull But DMA failed for Main domain. 0.781005] ti-udma 31150000.dma-controller: NAVSS ti,sci-dev-id read failure -22 [ 0.788684] ti-udma: probe of 31150000.dma-controller failed with error -22 http://lcpdresults.itg.ti.com/launcher/results/8013 Is there anything (except my comment for patch 3) which prevents this from been merged?
On 28/07/2020 22:19, Grygorii Strashko wrote: > > > On 23/07/2020 11:46, Lokesh Vutla wrote: >> This series adds initial support for latest new SoC, J7200, from Texas Instruments. >> >> The J7200 SoC is a part of the K3 Multicore SoC architecture platform. >> It is targeted for for automotive gateway, vehicle compute systems, >> Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications. >> The SoC aims to meet the complex processing needs of modern embedded products. >> >> See J7200 Technical Reference Manual (SPRUIU1, June 2020) >> for further details: https://www.ti.com/lit/pdf/spruiu1 >> >> Testing: >> - Boot log: https://pastebin.ubuntu.com/p/FvpzWjf7tw/ >> - ./scripts/checkpatch --strict >> - Few warningns about Line length exceeding 100 columns. >> But these are corresponding to comments >> - v8make dtbs_check >> - DT_SCHEMA_FLAGS="-u" >> DT_SCHEMA_FILES="Documentation/devicetree/bindings/arm/ti/k3.yaml" >> v8make dtbs_check >> - DT_SCHEMA_FLAGS="-u" >> DT_SCHEMA_FILES="Documentation/devicetree/bindings/arm/ti/k3.yaml" >> v8make dt_binding_check >> >> Lokesh Vutla (4): >> dt-bindings: arm: ti: Add bindings for J7200 SoC >> dt-bindings: arm: ti: Convert K3 board/soc bindings to DT schema >> arm64: dts: ti: Add support for J7200 SoC >> arm64: dts: ti: Add support for J7200 Common Processor Board >> >> .../devicetree/bindings/arm/ti/k3.txt | 26 --- >> .../devicetree/bindings/arm/ti/k3.yaml | 28 +++ >> MAINTAINERS | 2 +- >> arch/arm64/boot/dts/ti/Makefile | 3 +- >> .../dts/ti/k3-j7200-common-proc-board.dts | 64 ++++++ >> arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 199 ++++++++++++++++++ >> .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 84 ++++++++ >> arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 29 +++ >> arch/arm64/boot/dts/ti/k3-j7200.dtsi | 165 +++++++++++++++ >> 9 files changed, 572 insertions(+), 28 deletions(-) >> delete mode 100644 Documentation/devicetree/bindings/arm/ti/k3.txt >> create mode 100644 Documentation/devicetree/bindings/arm/ti/k3.yaml >> create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts >> create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi >> create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi >> create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi >> create mode 100644 arch/arm64/boot/dts/ti/k3-j7200.dtsi >> > > I have networking enabled on top of this series here. > > ssh://git@bitbucket.itg.ti.com/~x1045550/ti-priv-linux-kernel.git ti-linux-5.4.y-for-next-pull > > But DMA failed for Main domain. > 0.781005] ti-udma 31150000.dma-controller: NAVSS ti,sci-dev-id read failure -22 > [ 0.788684] ti-udma: probe of 31150000.dma-controller failed with error -22 > > http://lcpdresults.itg.ti.com/launcher/results/8013 > > Is there anything (except my comment for patch 3) which prevents this from been merged? > Sry. Pls. ignore this mail.