diff mbox series

net: ethernet: mtk_eth_soc: Always call mtk_gmac0_rgmii_adjust() for mt7623

Message ID 52f10e30f62b8521fd83525a03ecff94b72d509b.camel@infradead.org (mailing list archive)
State New, archived
Headers show
Series net: ethernet: mtk_eth_soc: Always call mtk_gmac0_rgmii_adjust() for mt7623 | expand

Commit Message

David Woodhouse July 23, 2020, 7:07 p.m. UTC 
From: René van Dorst <opensource@vdorst.com>

Modify mtk_gmac0_rgmii_adjust() so it can always be called.
mtk_gmac0_rgmii_adjust() sets-up the TRGMII clocks.

Signed-off-by: René van Dorst <opensource@vdorst.com>
Signed-off-By: David Woodhouse <dwmw2@infradead.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
---
On Mon, 2020-04-06 at 15:25 +0200, Frank Wunderlich wrote:
> have tested these 2 and additional rene's 3rd Patch on my tree [1]
> on BPi-R2, no problem with trgmii yet (multiple power-cycle+reboots).
> I had issues with current 5.6.0 version, so imho these should go
> also into 5.6.y

Here's that third patch of which Frank speaks. I don't see it submitted
yet, and I found I needed it on 5.4 too for the Ethernet to be
functional.

 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

Comments

David Miller July 29, 2020, 12:05 a.m. UTC | #1 
From: David Woodhouse <dwmw2@infradead.org>
Date: Thu, 23 Jul 2020 20:07:10 +0100

> From: René van Dorst <opensource@vdorst.com>
> 
> Modify mtk_gmac0_rgmii_adjust() so it can always be called.
> mtk_gmac0_rgmii_adjust() sets-up the TRGMII clocks.
> 
> Signed-off-by: René van Dorst <opensource@vdorst.com>
> Signed-off-By: David Woodhouse <dwmw2@infradead.org>
> Tested-by: Frank Wunderlich <frank-w@public-files.de>

Applied.
Frank Wunderlich July 29, 2020, 7:30 a.m. UTC | #2 
Hi,

Thank you David's to get this finally applied. Add recipient for stable tree as TRGMII on 5.4+ is also broken without this Patch.

regards Frank


> Gesendet: Mittwoch, 29. Juli 2020 um 02:05 Uhr
> Von: "David Miller" <davem@davemloft.net>
Applied.
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index b5408c5b954a..f89f225ab144 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -171,11 +171,21 @@  static int mt7621_gmac0_rgmii_adjust(struct mtk_eth *eth,
 	return 0;
 }
 
-static void mtk_gmac0_rgmii_adjust(struct mtk_eth *eth, int speed)
+static void mtk_gmac0_rgmii_adjust(struct mtk_eth *eth,
+				   phy_interface_t interface, int speed)
 {
 	u32 val;
 	int ret;
 
+	if (interface == PHY_INTERFACE_MODE_TRGMII) {
+		mtk_w32(eth, TRGMII_MODE, INTF_MODE);
+		val = 500000000;
+		ret = clk_set_rate(eth->clks[MTK_CLK_TRGPLL], val);
+		if (ret)
+			dev_err(eth->dev, "Failed to set trgmii pll: %d\n", ret);
+		return;
+	}
+
 	val = (speed == SPEED_1000) ?
 		INTF_MODE_RGMII_1000 : INTF_MODE_RGMII_10_100;
 	mtk_w32(eth, val, INTF_MODE);
@@ -262,10 +272,9 @@  static void mtk_mac_config(struct phylink_config *config, unsigned int mode,
 							      state->interface))
 					goto err_phy;
 			} else {
-				if (state->interface !=
-				    PHY_INTERFACE_MODE_TRGMII)
-					mtk_gmac0_rgmii_adjust(mac->hw,
-							       state->speed);
+				mtk_gmac0_rgmii_adjust(mac->hw,
+						       state->interface,
+						       state->speed);
 
 				/* mt7623_pad_clk_setup */
 				for (i = 0 ; i < NUM_TRGMII_CTRL; i++)