diff mbox series

[3/3] arm64: dts: sc7180: Add assigned-performance-states for i2c

Message ID 1596541616-27688-4-git-send-email-rnayak@codeaurora.org (mailing list archive)
State New, archived
Headers show
Series Add support for assigned-performance-states | expand

Commit Message

Rajendra Nayak Aug. 4, 2020, 11:46 a.m. UTC 
qup-i2c devices on sc7180 are clocked with a fixed clock (19.2 Mhz)
Though qup-i2c does not support DVFS, it still needs to vote for a
performance state on 'cx' to satisfy the 19.2 Mhz clock frequency
requirement.

Use 'assigned-performance-states' to pass this information from
device tree, and also add the power-domains property to specify
the cx power-domain.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

Comments

Stephen Boyd Aug. 5, 2020, 6:41 a.m. UTC | #1 
Quoting Rajendra Nayak (2020-08-04 04:46:56)
> qup-i2c devices on sc7180 are clocked with a fixed clock (19.2 Mhz)

s/Mhz/MHz/

> Though qup-i2c does not support DVFS, it still needs to vote for a
> performance state on 'cx' to satisfy the 19.2 Mhz clock frequency

Capitalize CX?

> requirement.
> 
> Use 'assigned-performance-states' to pass this information from
> device tree, and also add the power-domains property to specify
> the cx power-domain.
> 
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)

Can you generate this patch with more context? The hunks all look the
same so it's really hard to see where they apply.
Rajendra Nayak Aug. 5, 2020, 8:14 a.m. UTC | #2 
On 8/5/2020 12:11 PM, Stephen Boyd wrote:
> Quoting Rajendra Nayak (2020-08-04 04:46:56)
>> qup-i2c devices on sc7180 are clocked with a fixed clock (19.2 Mhz)
> 
> s/Mhz/MHz/
> 
>> Though qup-i2c does not support DVFS, it still needs to vote for a
>> performance state on 'cx' to satisfy the 19.2 Mhz clock frequency
> 
> Capitalize CX?
> 
>> requirement.
>>
>> Use 'assigned-performance-states' to pass this information from
>> device tree, and also add the power-domains property to specify
>> the cx power-domain.
>>
>> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
>> ---
>>   arch/arm64/boot/dts/qcom/sc7180.dtsi | 24 ++++++++++++++++++++++++
>>   1 file changed, 24 insertions(+)
> 
> Can you generate this patch with more context? The hunks all look the
> same so it's really hard to see where they apply.

Sure, will do and also fix the others mentioned above.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index d46b383..f96ca21 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -767,6 +767,8 @@ 
 						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -819,6 +821,8 @@ 
 						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -871,6 +875,8 @@ 
 						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -905,6 +911,8 @@ 
 						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -957,6 +965,8 @@ 
 						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -991,6 +1001,8 @@ 
 						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -1058,6 +1070,8 @@ 
 						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -1110,6 +1124,8 @@ 
 						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -1144,6 +1160,8 @@ 
 						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -1196,6 +1214,8 @@ 
 						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -1230,6 +1250,8 @@ 
 						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};
 
@@ -1282,6 +1304,8 @@ 
 						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 				status = "disabled";
 			};