| Message ID | 20200805084559.30092-1-kai.heng.feng@canonical.com (mailing list archive) |
|---|---|
| State | Rejected |
| Delegated to: | Kalle Valo |
| Headers | show |
| Series | rtw88: 8821c: Add RFE 2 support | expand |
> 8821CE with RFE 2 isn't supported: > [ 12.404834] rtw_8821ce 0000:02:00.0: rfe 2 isn't supported > [ 12.404937] rtw_8821ce 0000:02:00.0: failed to setup chip efuse info > [ 12.404939] rtw_8821ce 0000:02:00.0: failed to setup chip information > NACK The RFE type 2 should be working with some additional fixes. Did you tested connecting to AP with BT paired? The antenna configuration is different with RFE type 0. I will ask someone else to fix them. Then the RFE type 2 modules can be supported. Yen-Hsuan
Hi Tony, > On Aug 5, 2020, at 19:18, Tony Chuang <yhchuang@realtek.com> wrote: > >> 8821CE with RFE 2 isn't supported: >> [ 12.404834] rtw_8821ce 0000:02:00.0: rfe 2 isn't supported >> [ 12.404937] rtw_8821ce 0000:02:00.0: failed to setup chip efuse info >> [ 12.404939] rtw_8821ce 0000:02:00.0: failed to setup chip information >> > > NACK > > The RFE type 2 should be working with some additional fixes. > Did you tested connecting to AP with BT paired? No, I only tested WiFi. > The antenna configuration is different with RFE type 0. > I will ask someone else to fix them. > Then the RFE type 2 modules can be supported. Good to know that, I'll be patient and wait for a real fix. Kai-Heng > > Yen-Hsuan
On Wed, Aug 5, 2020 at 7:24 PM Kai-Heng Feng <kai.heng.feng@canonical.com> wrote: > > Hi Tony, > > > On Aug 5, 2020, at 19:18, Tony Chuang <yhchuang@realtek.com> wrote: > > > >> 8821CE with RFE 2 isn't supported: > >> [ 12.404834] rtw_8821ce 0000:02:00.0: rfe 2 isn't supported > >> [ 12.404937] rtw_8821ce 0000:02:00.0: failed to setup chip efuse info > >> [ 12.404939] rtw_8821ce 0000:02:00.0: failed to setup chip information > >> > > > > NACK > > > > The RFE type 2 should be working with some additional fixes. > > Did you tested connecting to AP with BT paired? > > No, I only tested WiFi. > > > The antenna configuration is different with RFE type 0. > > I will ask someone else to fix them. > > Then the RFE type 2 modules can be supported. > > Good to know that, I'll be patient and wait for a real fix. It's been quite some time, is support for RFE type 2 ready now? Kai-Heng > > Kai-Heng > > > > > Yen-Hsuan >
Kai-Heng Feng <kai.heng.feng@canonical.com> writes: > On Wed, Aug 5, 2020 at 7:24 PM Kai-Heng Feng > <kai.heng.feng@canonical.com> wrote: >> >> Hi Tony, >> >> > On Aug 5, 2020, at 19:18, Tony Chuang <yhchuang@realtek.com> wrote: >> > >> >> 8821CE with RFE 2 isn't supported: >> >> [ 12.404834] rtw_8821ce 0000:02:00.0: rfe 2 isn't supported >> >> [ 12.404937] rtw_8821ce 0000:02:00.0: failed to setup chip efuse info >> >> [ 12.404939] rtw_8821ce 0000:02:00.0: failed to setup chip information >> >> >> > >> > NACK >> > >> > The RFE type 2 should be working with some additional fixes. >> > Did you tested connecting to AP with BT paired? >> >> No, I only tested WiFi. >> >> > The antenna configuration is different with RFE type 0. >> > I will ask someone else to fix them. >> > Then the RFE type 2 modules can be supported. >> >> Good to know that, I'll be patient and wait for a real fix. > > It's been quite some time, is support for RFE type 2 ready now? It looks like this patch should add it: https://patchwork.kernel.org/project/linux-wireless/patch/20210202055012.8296-4-pkshih@realtek.com/
On 2/2/21 12:29 AM, Kalle Valo wrote: > Kai-Heng Feng <kai.heng.feng@canonical.com> writes: > >> On Wed, Aug 5, 2020 at 7:24 PM Kai-Heng Feng >> <kai.heng.feng@canonical.com> wrote: >>> >>> Hi Tony, >>> >>>> On Aug 5, 2020, at 19:18, Tony Chuang <yhchuang@realtek.com> wrote: >>>> >>>>> 8821CE with RFE 2 isn't supported: >>>>> [ 12.404834] rtw_8821ce 0000:02:00.0: rfe 2 isn't supported >>>>> [ 12.404937] rtw_8821ce 0000:02:00.0: failed to setup chip efuse info >>>>> [ 12.404939] rtw_8821ce 0000:02:00.0: failed to setup chip information >>>>> >>>> >>>> NACK >>>> >>>> The RFE type 2 should be working with some additional fixes. >>>> Did you tested connecting to AP with BT paired? >>> >>> No, I only tested WiFi. >>> >>>> The antenna configuration is different with RFE type 0. >>>> I will ask someone else to fix them. >>>> Then the RFE type 2 modules can be supported. >>> >>> Good to know that, I'll be patient and wait for a real fix. >> >> It's been quite some time, is support for RFE type 2 ready now? > > It looks like this patch should add it: > > https://patchwork.kernel.org/project/linux-wireless/patch/20210202055012.8296-4-pkshih@realtek.com/ > New firmware (rtw8821c_fw.bin) is also needed. That is available at https://github.com/lwfinger/rtw88.git. Larry
On Tue, Feb 2, 2021 at 3:02 PM Larry Finger <Larry.Finger@lwfinger.net> wrote: > > On 2/2/21 12:29 AM, Kalle Valo wrote: > > Kai-Heng Feng <kai.heng.feng@canonical.com> writes: > > > >> On Wed, Aug 5, 2020 at 7:24 PM Kai-Heng Feng > >> <kai.heng.feng@canonical.com> wrote: > >>> > >>> Hi Tony, > >>> > >>>> On Aug 5, 2020, at 19:18, Tony Chuang <yhchuang@realtek.com> wrote: > >>>> > >>>>> 8821CE with RFE 2 isn't supported: > >>>>> [ 12.404834] rtw_8821ce 0000:02:00.0: rfe 2 isn't supported > >>>>> [ 12.404937] rtw_8821ce 0000:02:00.0: failed to setup chip efuse info > >>>>> [ 12.404939] rtw_8821ce 0000:02:00.0: failed to setup chip information > >>>>> > >>>> > >>>> NACK > >>>> > >>>> The RFE type 2 should be working with some additional fixes. > >>>> Did you tested connecting to AP with BT paired? > >>> > >>> No, I only tested WiFi. > >>> > >>>> The antenna configuration is different with RFE type 0. > >>>> I will ask someone else to fix them. > >>>> Then the RFE type 2 modules can be supported. > >>> > >>> Good to know that, I'll be patient and wait for a real fix. > >> > >> It's been quite some time, is support for RFE type 2 ready now? > > > > It looks like this patch should add it: > > > > https://patchwork.kernel.org/project/linux-wireless/patch/20210202055012.8296-4-pkshih@realtek.com/ > > > New firmware (rtw8821c_fw.bin) is also needed. That is available at > https://github.com/lwfinger/rtw88.git. Thanks. RFE2 works with the new firmware. Kai-Heng > > Larry >
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8821c.c b/drivers/net/wireless/realtek/rtw88/rtw8821c.c index d8863d8a5468..f7270d0f1d55 100644 --- a/drivers/net/wireless/realtek/rtw88/rtw8821c.c +++ b/drivers/net/wireless/realtek/rtw88/rtw8821c.c @@ -1410,6 +1410,7 @@ static const struct rtw_intf_phy_para_table phy_para_table_8821c = { static const struct rtw_rfe_def rtw8821c_rfe_defs[] = { [0] = RTW_DEF_RFE(8821c, 0, 0), + [2] = RTW_DEF_RFE(8821c, 0, 0), }; static struct rtw_hw_reg rtw8821c_dig[] = {
8821CE with RFE 2 isn't supported: [ 12.404834] rtw_8821ce 0000:02:00.0: rfe 2 isn't supported [ 12.404937] rtw_8821ce 0000:02:00.0: failed to setup chip efuse info [ 12.404939] rtw_8821ce 0000:02:00.0: failed to setup chip information It works well if both type0 tables are in use, so add it to the RFE default. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> --- drivers/net/wireless/realtek/rtw88/rtw8821c.c | 1 + 1 file changed, 1 insertion(+)