diff mbox series

[2/6] remoteproc: Add a remoteproc driver for the MT8183's APU

Message ID 20200713132927.24925-3-abailon@baylibre.com (mailing list archive)
State Superseded
Headers show
Series Add support of mt8183 APU | expand

Commit Message

Alexandre Bailon July 13, 2020, 1:29 p.m. UTC
This adds a driver to control the APU present in the MT8183.
This loads the firmware and start the DSP.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
---
 drivers/remoteproc/Kconfig         |  10 +
 drivers/remoteproc/Makefile        |   1 +
 drivers/remoteproc/mtk_apu_rproc.c | 308 +++++++++++++++++++++++++++++
 3 files changed, 319 insertions(+)
 create mode 100644 drivers/remoteproc/mtk_apu_rproc.c

Comments

Mathieu Poirier July 20, 2020, 10:17 p.m. UTC | #1
On Mon, Jul 13, 2020 at 03:29:23PM +0200, Alexandre Bailon wrote:
> This adds a driver to control the APU present in the MT8183.
> This loads the firmware and start the DSP.
> 
> Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
> ---
>  drivers/remoteproc/Kconfig         |  10 +
>  drivers/remoteproc/Makefile        |   1 +
>  drivers/remoteproc/mtk_apu_rproc.c | 308 +++++++++++++++++++++++++++++

I would name the file mtk_apu.c to be consistent with the existing mtk_scp.c

>  3 files changed, 319 insertions(+)
>  create mode 100644 drivers/remoteproc/mtk_apu_rproc.c
> 
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index c4d1731295eb..e116d4a12ac3 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -42,6 +42,16 @@ config MTK_SCP
>  
>  	  It's safe to say N here.
>  
> +config MTK_APU
> +	tristate "Mediatek APU remoteproc support"
> +	depends on ARCH_MEDIATEK
> +	depends on MTK_IOMMU
> +	help
> +	  Say y to support the Mediatek's Accelerated Processing Unit (APU) via
> +	  the remote processor framework.
> +
> +	  It's safe to say N here.
> +
>  config OMAP_REMOTEPROC
>  	tristate "OMAP remoteproc support"
>  	depends on ARCH_OMAP4 || SOC_OMAP5 || SOC_DRA7XX
> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> index e8b886e511f0..2ea231b75fa6 100644
> --- a/drivers/remoteproc/Makefile
> +++ b/drivers/remoteproc/Makefile
> @@ -12,6 +12,7 @@ remoteproc-y				+= remoteproc_elf_loader.o
>  obj-$(CONFIG_IMX_REMOTEPROC)		+= imx_rproc.o
>  obj-$(CONFIG_INGENIC_VPU_RPROC)		+= ingenic_rproc.o
>  obj-$(CONFIG_MTK_SCP)			+= mtk_scp.o mtk_scp_ipi.o
> +obj-$(CONFIG_MTK_APU)			+= mtk_apu_rproc.o
>  obj-$(CONFIG_OMAP_REMOTEPROC)		+= omap_remoteproc.o
>  obj-$(CONFIG_WKUP_M3_RPROC)		+= wkup_m3_rproc.o
>  obj-$(CONFIG_DA8XX_REMOTEPROC)		+= da8xx_remoteproc.o
> diff --git a/drivers/remoteproc/mtk_apu_rproc.c b/drivers/remoteproc/mtk_apu_rproc.c
> new file mode 100644
> index 000000000000..fb416a817ef3
> --- /dev/null
> +++ b/drivers/remoteproc/mtk_apu_rproc.c
> @@ -0,0 +1,308 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020 BayLibre SAS
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iommu.h>
> +#include <linux/irq.h>
> +#include <linux/kernel.h>
> +#include <linux/highmem.h>

Move this below "delay.h"

> +#include <linux/module.h>
> +#include <linux/of_reserved_mem.h>
> +#include <linux/platform_device.h>
> +#include <linux/remoteproc.h>
> +
> +#include "remoteproc_internal.h"
> +
> +/* From MT8183 4.5 Vision Processor Unit (VPU).pdf datasheet */
> +#define SW_RST					(0x0000000C)
> +#define  SW_RST_OCD_HALT_ON_RST			BIT(12)
> +#define  SW_RST_IPU_D_RST			BIT(8)
> +#define  SW_RST_IPU_B_RST			BIT(4)

Please don't indent defines.

> +#define CORE_CTRL				(0x00000110)
> +#define  CORE_CTRL_PDEBUG_ENABLE		BIT(31)
> +#define	 CORE_CTRL_SRAM_64K_iMEM		(0x00 << 27)
> +#define	 CORE_CTRL_SRAM_96K_iMEM		(0x01 << 27)
> +#define	 CORE_CTRL_SRAM_128K_iMEM		(0x02 << 27)
> +#define	 CORE_CTRL_SRAM_192K_iMEM		(0x03 << 27)
> +#define	 CORE_CTRL_SRAM_256K_iMEM		(0x04 << 27)
> +#define  CORE_CTRL_PBCLK_ENABLE			BIT(26)
> +#define  CORE_CTRL_RUN_STALL			BIT(23)
> +#define  CORE_CTRL_STATE_VECTOR_SELECT		BIT(19)
> +#define  CORE_CTRL_PIF_GATED			BIT(17)
> +#define  CORE_CTRL_NMI				BIT(0)
> +#define CORE_XTENSA_INT				(0x00000114)
> +#define CORE_CTL_XTENSA_INT			(0x00000118)
> +#define CORE_DEFAULT0				(0x0000013C)
> +#define  CORE_DEFAULT0_QOS_SWAP_0		(0x00 << 28)
> +#define  CORE_DEFAULT0_QOS_SWAP_1		(0x01 << 28)
> +#define  CORE_DEFAULT0_QOS_SWAP_2		(0x02 << 28)
> +#define  CORE_DEFAULT0_QOS_SWAP_3		(0x03 << 28)
> +#define  CORE_DEFAULT0_ARUSER_USE_IOMMU		(0x10 << 23)
> +#define  CORE_DEFAULT0_AWUSER_USE_IOMMU		(0x10 << 18)
> +#define CORE_DEFAULT1				(0x00000140)
> +#define  CORE_DEFAULT0_ARUSER_IDMA_USE_IOMMU	(0x10 << 0)
> +#define  CORE_DEFAULT0_AWUSER_IDMA_USE_IOMMU	(0x10 << 5)
> +#define CORE_XTENSA_ALTRESETVEC			(0x000001F8)
> +
> +struct mtk_vpu_rproc {
> +	struct device *dev;
> +	struct rproc *rproc;
> +
> +	void __iomem *base;
> +	int irq;
> +	struct clk *axi;
> +	struct clk *ipu;
> +	struct clk *jtag;
> +};
> +
> +static u32 vpu_read32(struct mtk_vpu_rproc *vpu_rproc, u32 off)
> +{
> +	return readl(vpu_rproc->base + off);
> +}
> +
> +static void vpu_write32(struct mtk_vpu_rproc *vpu_rproc, u32 off, u32 value)
> +{
> +	writel(value, vpu_rproc->base + off);
> +}

Not sure that much is gained by adding the above two functions.  Just using
readl/writel would suit me just fine.

> +
> +static int mtk_vpu_rproc_start(struct rproc *rproc)
> +{
> +	struct mtk_vpu_rproc *vpu_rproc = rproc->priv;
> +	u32 core_ctrl;
> +
> +	vpu_write32(vpu_rproc, CORE_XTENSA_ALTRESETVEC, rproc->bootaddr);
> +
> +	core_ctrl = vpu_read32(vpu_rproc, CORE_CTRL);
> +	core_ctrl |= CORE_CTRL_PDEBUG_ENABLE | CORE_CTRL_PBCLK_ENABLE |
> +		     CORE_CTRL_STATE_VECTOR_SELECT | CORE_CTRL_RUN_STALL |
> +		     CORE_CTRL_PIF_GATED;
> +	vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl);
> +
> +	vpu_write32(vpu_rproc, SW_RST, SW_RST_OCD_HALT_ON_RST |
> +				       SW_RST_IPU_B_RST | SW_RST_IPU_D_RST);
> +	ndelay(27);

What is this for?  The state of the VPU can't be polled?

> +	vpu_write32(vpu_rproc, SW_RST, 0);
> +
> +	core_ctrl &= ~CORE_CTRL_PIF_GATED;
> +	vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl);
> +
> +	vpu_write32(vpu_rproc, CORE_DEFAULT0, CORE_DEFAULT0_AWUSER_USE_IOMMU |
> +					      CORE_DEFAULT0_ARUSER_USE_IOMMU |
> +					      CORE_DEFAULT0_QOS_SWAP_1);
> +	vpu_write32(vpu_rproc, CORE_DEFAULT1,
> +		    CORE_DEFAULT0_AWUSER_IDMA_USE_IOMMU |
> +		    CORE_DEFAULT0_ARUSER_IDMA_USE_IOMMU);
> +
> +	core_ctrl &= ~CORE_CTRL_RUN_STALL;
> +	vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl);

I would certainly appreciate more comments that describe that is going on in
this function.

> +
> +	return 0;
> +}
> +
> +static int mtk_vpu_rproc_stop(struct rproc *rproc)
> +{
> +	struct mtk_vpu_rproc *vpu_rproc = rproc->priv;
> +	u32 core_ctrl;
> +
> +	core_ctrl = vpu_read32(vpu_rproc, CORE_CTRL);
> +	vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl | CORE_CTRL_RUN_STALL);
> +
> +	return 0;
> +}
> +
> +static void mtk_vpu_rproc_kick(struct rproc *rproc, int vqid)
> +{
> +	struct mtk_vpu_rproc *vpu_rproc = rproc->priv;
> +
> +	vpu_write32(vpu_rproc, CORE_CTL_XTENSA_INT, 1 << vqid);
> +}
> +
> +static const struct rproc_ops mtk_vpu_rproc_ops = {
> +	.start		= mtk_vpu_rproc_start,
> +	.stop		= mtk_vpu_rproc_stop,
> +	.kick		= mtk_vpu_rproc_kick,
> +};
> +
> +static irqreturn_t mtk_vpu_rproc_callback(int irq, void *data)
> +{
> +	struct rproc *rproc = (struct rproc *)data;

There is no need to cast when working with a void pointer.  The same comment
applies throughout.

> +	struct mtk_vpu_rproc *vpu_rproc = (struct mtk_vpu_rproc *)rproc->priv;
> +
> +	vpu_write32(vpu_rproc, CORE_XTENSA_INT, 1);
> +
> +	return IRQ_WAKE_THREAD;
> +}
> +
> +static irqreturn_t handle_event(int irq, void *data)
> +{
> +	struct rproc *rproc = (struct rproc *)data;
> +
> +	rproc_vq_interrupt(rproc, 0);
> +	rproc_vq_interrupt(rproc, 1);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int mtk_vpu_rproc_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct mtk_vpu_rproc *vpu_rproc;
> +	struct rproc *rproc;
> +	struct resource *res;
> +	int ret;
> +
> +	rproc = rproc_alloc(dev, "apu", &mtk_vpu_rproc_ops, NULL,
> +			    sizeof(*vpu_rproc));

The problem with hard coding the name of the remote process is that it work on
only when there is a single processor.  Based on the DTS extention sent with
this serie, there seems to be a possibility of having more the one.  As such
both remote processor will be called "apu", mandating you to look at the
platform resources to know which is which.  Consider using dev_name() or
dev->of_node->name. 

> +	if (!rproc)
> +		return -ENOMEM;
> +
> +	rproc->recovery_disabled = true;
> +	rproc->has_iommu = false;
> +
> +	vpu_rproc = rproc->priv;
> +	vpu_rproc->rproc = rproc;
> +	vpu_rproc->dev = dev;
> +
> +	platform_set_drvdata(pdev, rproc);
> +
> +	rproc->domain = iommu_get_domain_for_dev(dev);
> +	if (!rproc->domain) {
> +		dev_err(dev, "Failed to get the IOMMU domain\n");
> +		ret = -EINVAL;
> +		goto free_rproc;
> +	}
> +
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	vpu_rproc->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(vpu_rproc->base)) {
> +		dev_err(&pdev->dev, "Failed to map mmio\n");

Above dev_err() is used with @dev while here @pdev->dev is.  Please pick one you
like and stick with it. 

> +		ret = PTR_ERR(vpu_rproc->base);
> +		goto free_rproc;
> +	}
> +
> +	vpu_rproc->irq = platform_get_irq(pdev, 0);
> +	if (vpu_rproc->irq < 0) {
> +		ret = vpu_rproc->irq;
> +		goto free_rproc;
> +	}
> +
> +	ret = devm_request_threaded_irq(dev, vpu_rproc->irq,
> +					mtk_vpu_rproc_callback, handle_event,
> +					IRQF_SHARED | IRQF_ONESHOT,
> +					"mtk_vpu-remoteproc", rproc);

Same problem as above, i.e hard coding the name of the interrupt will be
confusing when probing sysfs.  Here rproc->index holds the value that
corresponds to 'X' in /sys/dev/class/remoteproc/remoteprocX.  Simply build a
string using that and feed it to devm_request_threaded_ifq().


> +	if (ret) {
> +		dev_err(dev, "devm_request_threaded_irq error: %d\n", ret);
> +		goto free_rproc;
> +	}
> +
> +	vpu_rproc->ipu = devm_clk_get(dev, "ipu");
> +	if (IS_ERR(vpu_rproc->ipu)) {
> +		dev_err(dev, "Failed to get ipu clock\n");
> +		ret = PTR_ERR(vpu_rproc->ipu);
> +		goto free_rproc;
> +	}
> +
> +	ret = clk_prepare_enable(vpu_rproc->ipu);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable ipu clock\n");
> +		goto free_rproc;
> +	}
> +
> +	vpu_rproc->axi = devm_clk_get(dev, "axi");
> +	if (IS_ERR(vpu_rproc->axi)) {
> +		dev_err(dev, "Failed to get axi clock\n");
> +		ret = PTR_ERR(vpu_rproc->axi);
> +		goto clk_disable_ipu;
> +	}
> +
> +	ret = clk_prepare_enable(vpu_rproc->axi);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable axi clock\n");
> +		goto clk_disable_ipu;
> +	}a

Please look at how Paul use the clock bulk API to deal with multiple clocs in
ingenic_rproc.c and see if it is possible to use the same scheme.

> +
> +	vpu_rproc->jtag = devm_clk_get_optional(dev, "jtag");

Why is the jtag clock optional when the binding document says that it "seems to
be required to run the DSP, even when JTAG is not in use"?

> +	if (IS_ERR(vpu_rproc->jtag)) {
> +		dev_err(dev, "Failed to enable jtag clock\n");
> +		ret = PTR_ERR(vpu_rproc->jtag);
> +		goto clk_disable_axi;
> +	}
> +
> +	ret = clk_prepare_enable(vpu_rproc->jtag);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable jtag clock\n");
> +		goto clk_disable_axi;
> +	}
> +
> +	ret = of_reserved_mem_device_init(dev);
> +	if (ret) {
> +		dev_err(dev, "device does not have specific CMA pool\n");
> +		goto clk_disable_jtag;
> +	}
> +
> +	ret = rproc_add(rproc);
> +	if (ret) {
> +		dev_err(dev, "rproc_add failed: %d\n", ret);
> +		goto free_mem;
> +	}
> +
> +	return 0;
> +
> +free_mem:
> +	of_reserved_mem_device_release(dev);
> +clk_disable_jtag:
> +	clk_disable_unprepare(vpu_rproc->jtag);
> +clk_disable_axi:
> +	clk_disable_unprepare(vpu_rproc->axi);
> +clk_disable_ipu:
> +	clk_disable_unprepare(vpu_rproc->ipu);
> +free_rproc:
> +	rproc_free(rproc);
> +
> +	return ret;
> +}
> +
> +static int mtk_vpu_rproc_remove(struct platform_device *pdev)
> +{
> +	struct rproc *rproc = platform_get_drvdata(pdev);
> +	struct mtk_vpu_rproc *vpu_rproc = (struct mtk_vpu_rproc *)rproc->priv;
> +	struct device *dev = &pdev->dev;
> +
> +	disable_irq(vpu_rproc->irq);
> +
> +	rproc_del(rproc);
> +	of_reserved_mem_device_release(dev);
> +	clk_disable_unprepare(vpu_rproc->jtag);
> +	clk_disable_unprepare(vpu_rproc->axi);
> +	clk_disable_unprepare(vpu_rproc->ipu);
> +	rproc_free(rproc);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id mtk_vpu_rproc_of_match[] __maybe_unused = {

Why is "__maybe_unused" needed?

Thanks,
Mathieu


> +	{ .compatible = "mediatek,mt8183-apu", },
> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, mtk_vpu_rproc_of_match);
> +
> +static struct platform_driver mtk_vpu_rproc_driver = {
> +	.probe = mtk_vpu_rproc_probe,
> +	.remove = mtk_vpu_rproc_remove,
> +	.driver = {
> +		.name = "mtk_vpu-rproc",
> +		.of_match_table = of_match_ptr(mtk_vpu_rproc_of_match),
> +	},
> +};
> +module_platform_driver(mtk_vpu_rproc_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Alexandre Bailon");
> +MODULE_DESCRIPTION("Mt8183 VPU Remote Processor control driver");
> -- 
> 2.26.2
>
Mathieu Poirier July 20, 2020, 10:19 p.m. UTC | #2
On Mon, Jul 13, 2020 at 03:29:23PM +0200, Alexandre Bailon wrote:
> This adds a driver to control the APU present in the MT8183.
> This loads the firmware and start the DSP.
> 
> Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
> ---
>  drivers/remoteproc/Kconfig         |  10 +
>  drivers/remoteproc/Makefile        |   1 +
>  drivers/remoteproc/mtk_apu_rproc.c | 308 +++++++++++++++++++++++++++++
>  3 files changed, 319 insertions(+)
>  create mode 100644 drivers/remoteproc/mtk_apu_rproc.c
> 
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index c4d1731295eb..e116d4a12ac3 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -42,6 +42,16 @@ config MTK_SCP
>  
>  	  It's safe to say N here.
>  
> +config MTK_APU
> +	tristate "Mediatek APU remoteproc support"
> +	depends on ARCH_MEDIATEK
> +	depends on MTK_IOMMU
> +	help
> +	  Say y to support the Mediatek's Accelerated Processing Unit (APU) via
> +	  the remote processor framework.
> +
> +	  It's safe to say N here.
> +
>  config OMAP_REMOTEPROC
>  	tristate "OMAP remoteproc support"
>  	depends on ARCH_OMAP4 || SOC_OMAP5 || SOC_DRA7XX
> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> index e8b886e511f0..2ea231b75fa6 100644
> --- a/drivers/remoteproc/Makefile
> +++ b/drivers/remoteproc/Makefile
> @@ -12,6 +12,7 @@ remoteproc-y				+= remoteproc_elf_loader.o
>  obj-$(CONFIG_IMX_REMOTEPROC)		+= imx_rproc.o
>  obj-$(CONFIG_INGENIC_VPU_RPROC)		+= ingenic_rproc.o
>  obj-$(CONFIG_MTK_SCP)			+= mtk_scp.o mtk_scp_ipi.o
> +obj-$(CONFIG_MTK_APU)			+= mtk_apu_rproc.o
>  obj-$(CONFIG_OMAP_REMOTEPROC)		+= omap_remoteproc.o
>  obj-$(CONFIG_WKUP_M3_RPROC)		+= wkup_m3_rproc.o
>  obj-$(CONFIG_DA8XX_REMOTEPROC)		+= da8xx_remoteproc.o
> diff --git a/drivers/remoteproc/mtk_apu_rproc.c b/drivers/remoteproc/mtk_apu_rproc.c
> new file mode 100644
> index 000000000000..fb416a817ef3
> --- /dev/null
> +++ b/drivers/remoteproc/mtk_apu_rproc.c
> @@ -0,0 +1,308 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020 BayLibre SAS
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iommu.h>
> +#include <linux/irq.h>
> +#include <linux/kernel.h>
> +#include <linux/highmem.h>
> +#include <linux/module.h>
> +#include <linux/of_reserved_mem.h>
> +#include <linux/platform_device.h>
> +#include <linux/remoteproc.h>
> +
> +#include "remoteproc_internal.h"
> +
> +/* From MT8183 4.5 Vision Processor Unit (VPU).pdf datasheet */
> +#define SW_RST					(0x0000000C)
> +#define  SW_RST_OCD_HALT_ON_RST			BIT(12)
> +#define  SW_RST_IPU_D_RST			BIT(8)
> +#define  SW_RST_IPU_B_RST			BIT(4)
> +#define CORE_CTRL				(0x00000110)
> +#define  CORE_CTRL_PDEBUG_ENABLE		BIT(31)
> +#define	 CORE_CTRL_SRAM_64K_iMEM		(0x00 << 27)
> +#define	 CORE_CTRL_SRAM_96K_iMEM		(0x01 << 27)
> +#define	 CORE_CTRL_SRAM_128K_iMEM		(0x02 << 27)
> +#define	 CORE_CTRL_SRAM_192K_iMEM		(0x03 << 27)
> +#define	 CORE_CTRL_SRAM_256K_iMEM		(0x04 << 27)
> +#define  CORE_CTRL_PBCLK_ENABLE			BIT(26)
> +#define  CORE_CTRL_RUN_STALL			BIT(23)
> +#define  CORE_CTRL_STATE_VECTOR_SELECT		BIT(19)
> +#define  CORE_CTRL_PIF_GATED			BIT(17)
> +#define  CORE_CTRL_NMI				BIT(0)
> +#define CORE_XTENSA_INT				(0x00000114)
> +#define CORE_CTL_XTENSA_INT			(0x00000118)
> +#define CORE_DEFAULT0				(0x0000013C)
> +#define  CORE_DEFAULT0_QOS_SWAP_0		(0x00 << 28)
> +#define  CORE_DEFAULT0_QOS_SWAP_1		(0x01 << 28)
> +#define  CORE_DEFAULT0_QOS_SWAP_2		(0x02 << 28)
> +#define  CORE_DEFAULT0_QOS_SWAP_3		(0x03 << 28)
> +#define  CORE_DEFAULT0_ARUSER_USE_IOMMU		(0x10 << 23)
> +#define  CORE_DEFAULT0_AWUSER_USE_IOMMU		(0x10 << 18)
> +#define CORE_DEFAULT1				(0x00000140)
> +#define  CORE_DEFAULT0_ARUSER_IDMA_USE_IOMMU	(0x10 << 0)
> +#define  CORE_DEFAULT0_AWUSER_IDMA_USE_IOMMU	(0x10 << 5)
> +#define CORE_XTENSA_ALTRESETVEC			(0x000001F8)
> +
> +struct mtk_vpu_rproc {
> +	struct device *dev;
> +	struct rproc *rproc;
> +
> +	void __iomem *base;
> +	int irq;
> +	struct clk *axi;
> +	struct clk *ipu;
> +	struct clk *jtag;
> +};
> +
> +static u32 vpu_read32(struct mtk_vpu_rproc *vpu_rproc, u32 off)
> +{
> +	return readl(vpu_rproc->base + off);
> +}
> +
> +static void vpu_write32(struct mtk_vpu_rproc *vpu_rproc, u32 off, u32 value)
> +{
> +	writel(value, vpu_rproc->base + off);
> +}
> +
> +static int mtk_vpu_rproc_start(struct rproc *rproc)
> +{
> +	struct mtk_vpu_rproc *vpu_rproc = rproc->priv;
> +	u32 core_ctrl;
> +
> +	vpu_write32(vpu_rproc, CORE_XTENSA_ALTRESETVEC, rproc->bootaddr);
> +
> +	core_ctrl = vpu_read32(vpu_rproc, CORE_CTRL);
> +	core_ctrl |= CORE_CTRL_PDEBUG_ENABLE | CORE_CTRL_PBCLK_ENABLE |
> +		     CORE_CTRL_STATE_VECTOR_SELECT | CORE_CTRL_RUN_STALL |
> +		     CORE_CTRL_PIF_GATED;
> +	vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl);
> +
> +	vpu_write32(vpu_rproc, SW_RST, SW_RST_OCD_HALT_ON_RST |
> +				       SW_RST_IPU_B_RST | SW_RST_IPU_D_RST);
> +	ndelay(27);
> +	vpu_write32(vpu_rproc, SW_RST, 0);
> +
> +	core_ctrl &= ~CORE_CTRL_PIF_GATED;
> +	vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl);
> +
> +	vpu_write32(vpu_rproc, CORE_DEFAULT0, CORE_DEFAULT0_AWUSER_USE_IOMMU |
> +					      CORE_DEFAULT0_ARUSER_USE_IOMMU |
> +					      CORE_DEFAULT0_QOS_SWAP_1);
> +	vpu_write32(vpu_rproc, CORE_DEFAULT1,
> +		    CORE_DEFAULT0_AWUSER_IDMA_USE_IOMMU |
> +		    CORE_DEFAULT0_ARUSER_IDMA_USE_IOMMU);
> +
> +	core_ctrl &= ~CORE_CTRL_RUN_STALL;
> +	vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl);
> +
> +	return 0;
> +}
> +
> +static int mtk_vpu_rproc_stop(struct rproc *rproc)
> +{
> +	struct mtk_vpu_rproc *vpu_rproc = rproc->priv;
> +	u32 core_ctrl;
> +
> +	core_ctrl = vpu_read32(vpu_rproc, CORE_CTRL);
> +	vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl | CORE_CTRL_RUN_STALL);
> +
> +	return 0;
> +}
> +
> +static void mtk_vpu_rproc_kick(struct rproc *rproc, int vqid)
> +{
> +	struct mtk_vpu_rproc *vpu_rproc = rproc->priv;
> +
> +	vpu_write32(vpu_rproc, CORE_CTL_XTENSA_INT, 1 << vqid);
> +}
> +
> +static const struct rproc_ops mtk_vpu_rproc_ops = {
> +	.start		= mtk_vpu_rproc_start,
> +	.stop		= mtk_vpu_rproc_stop,
> +	.kick		= mtk_vpu_rproc_kick,
> +};
> +
> +static irqreturn_t mtk_vpu_rproc_callback(int irq, void *data)
> +{
> +	struct rproc *rproc = (struct rproc *)data;
> +	struct mtk_vpu_rproc *vpu_rproc = (struct mtk_vpu_rproc *)rproc->priv;
> +
> +	vpu_write32(vpu_rproc, CORE_XTENSA_INT, 1);
> +
> +	return IRQ_WAKE_THREAD;
> +}
> +
> +static irqreturn_t handle_event(int irq, void *data)
> +{
> +	struct rproc *rproc = (struct rproc *)data;
> +
> +	rproc_vq_interrupt(rproc, 0);
> +	rproc_vq_interrupt(rproc, 1);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int mtk_vpu_rproc_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct mtk_vpu_rproc *vpu_rproc;
> +	struct rproc *rproc;
> +	struct resource *res;
> +	int ret;
> +
> +	rproc = rproc_alloc(dev, "apu", &mtk_vpu_rproc_ops, NULL,
> +			    sizeof(*vpu_rproc));
> +	if (!rproc)
> +		return -ENOMEM;
> +
> +	rproc->recovery_disabled = true;
> +	rproc->has_iommu = false;
> +
> +	vpu_rproc = rproc->priv;
> +	vpu_rproc->rproc = rproc;
> +	vpu_rproc->dev = dev;
> +
> +	platform_set_drvdata(pdev, rproc);
> +
> +	rproc->domain = iommu_get_domain_for_dev(dev);
> +	if (!rproc->domain) {
> +		dev_err(dev, "Failed to get the IOMMU domain\n");
> +		ret = -EINVAL;
> +		goto free_rproc;
> +	}
> +
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	vpu_rproc->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(vpu_rproc->base)) {
> +		dev_err(&pdev->dev, "Failed to map mmio\n");
> +		ret = PTR_ERR(vpu_rproc->base);
> +		goto free_rproc;
> +	}
> +
> +	vpu_rproc->irq = platform_get_irq(pdev, 0);
> +	if (vpu_rproc->irq < 0) {
> +		ret = vpu_rproc->irq;
> +		goto free_rproc;
> +	}
> +
> +	ret = devm_request_threaded_irq(dev, vpu_rproc->irq,
> +					mtk_vpu_rproc_callback, handle_event,
> +					IRQF_SHARED | IRQF_ONESHOT,
> +					"mtk_vpu-remoteproc", rproc);
> +	if (ret) {
> +		dev_err(dev, "devm_request_threaded_irq error: %d\n", ret);
> +		goto free_rproc;
> +	}
> +
> +	vpu_rproc->ipu = devm_clk_get(dev, "ipu");
> +	if (IS_ERR(vpu_rproc->ipu)) {
> +		dev_err(dev, "Failed to get ipu clock\n");
> +		ret = PTR_ERR(vpu_rproc->ipu);
> +		goto free_rproc;
> +	}
> +
> +	ret = clk_prepare_enable(vpu_rproc->ipu);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable ipu clock\n");
> +		goto free_rproc;
> +	}
> +
> +	vpu_rproc->axi = devm_clk_get(dev, "axi");
> +	if (IS_ERR(vpu_rproc->axi)) {
> +		dev_err(dev, "Failed to get axi clock\n");
> +		ret = PTR_ERR(vpu_rproc->axi);
> +		goto clk_disable_ipu;
> +	}
> +
> +	ret = clk_prepare_enable(vpu_rproc->axi);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable axi clock\n");
> +		goto clk_disable_ipu;
> +	}
> +
> +	vpu_rproc->jtag = devm_clk_get_optional(dev, "jtag");
> +	if (IS_ERR(vpu_rproc->jtag)) {
> +		dev_err(dev, "Failed to enable jtag clock\n");
> +		ret = PTR_ERR(vpu_rproc->jtag);
> +		goto clk_disable_axi;
> +	}
> +
> +	ret = clk_prepare_enable(vpu_rproc->jtag);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable jtag clock\n");
> +		goto clk_disable_axi;
> +	}

I forgot...  Clocks get enabled when the system is booted or the module loaded,
something that is highly inefficient.  Please use rproc->prepare/unprepare() to
deal with clocks at the appropriate time.

> +
> +	ret = of_reserved_mem_device_init(dev);
> +	if (ret) {
> +		dev_err(dev, "device does not have specific CMA pool\n");
> +		goto clk_disable_jtag;
> +	}
> +
> +	ret = rproc_add(rproc);
> +	if (ret) {
> +		dev_err(dev, "rproc_add failed: %d\n", ret);
> +		goto free_mem;
> +	}
> +
> +	return 0;
> +
> +free_mem:
> +	of_reserved_mem_device_release(dev);
> +clk_disable_jtag:
> +	clk_disable_unprepare(vpu_rproc->jtag);
> +clk_disable_axi:
> +	clk_disable_unprepare(vpu_rproc->axi);
> +clk_disable_ipu:
> +	clk_disable_unprepare(vpu_rproc->ipu);
> +free_rproc:
> +	rproc_free(rproc);
> +
> +	return ret;
> +}
> +
> +static int mtk_vpu_rproc_remove(struct platform_device *pdev)
> +{
> +	struct rproc *rproc = platform_get_drvdata(pdev);
> +	struct mtk_vpu_rproc *vpu_rproc = (struct mtk_vpu_rproc *)rproc->priv;
> +	struct device *dev = &pdev->dev;
> +
> +	disable_irq(vpu_rproc->irq);
> +
> +	rproc_del(rproc);
> +	of_reserved_mem_device_release(dev);
> +	clk_disable_unprepare(vpu_rproc->jtag);
> +	clk_disable_unprepare(vpu_rproc->axi);
> +	clk_disable_unprepare(vpu_rproc->ipu);
> +	rproc_free(rproc);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id mtk_vpu_rproc_of_match[] __maybe_unused = {
> +	{ .compatible = "mediatek,mt8183-apu", },
> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, mtk_vpu_rproc_of_match);
> +
> +static struct platform_driver mtk_vpu_rproc_driver = {
> +	.probe = mtk_vpu_rproc_probe,
> +	.remove = mtk_vpu_rproc_remove,
> +	.driver = {
> +		.name = "mtk_vpu-rproc",
> +		.of_match_table = of_match_ptr(mtk_vpu_rproc_of_match),
> +	},
> +};
> +module_platform_driver(mtk_vpu_rproc_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Alexandre Bailon");
> +MODULE_DESCRIPTION("Mt8183 VPU Remote Processor control driver");
> -- 
> 2.26.2
>
Alexandre Bailon Aug. 6, 2020, 1:25 p.m. UTC | #3
Hi Mathieu,

On 7/21/20 12:17 AM, Mathieu Poirier wrote:
> On Mon, Jul 13, 2020 at 03:29:23PM +0200, Alexandre Bailon wrote:
>> This adds a driver to control the APU present in the MT8183.
>> This loads the firmware and start the DSP.
>>
>> Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
>> ---
>>   drivers/remoteproc/Kconfig         |  10 +
>>   drivers/remoteproc/Makefile        |   1 +
>>   drivers/remoteproc/mtk_apu_rproc.c | 308 +++++++++++++++++++++++++++++
> I would name the file mtk_apu.c to be consistent with the existing mtk_scp.c
I will rename it
>
>>   3 files changed, 319 insertions(+)
>>   create mode 100644 drivers/remoteproc/mtk_apu_rproc.c
>>
>> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
>> index c4d1731295eb..e116d4a12ac3 100644
>> --- a/drivers/remoteproc/Kconfig
>> +++ b/drivers/remoteproc/Kconfig
>> @@ -42,6 +42,16 @@ config MTK_SCP
>>   
>>   	  It's safe to say N here.
>>   
>> +config MTK_APU
>> +	tristate "Mediatek APU remoteproc support"
>> +	depends on ARCH_MEDIATEK
>> +	depends on MTK_IOMMU
>> +	help
>> +	  Say y to support the Mediatek's Accelerated Processing Unit (APU) via
>> +	  the remote processor framework.
>> +
>> +	  It's safe to say N here.
>> +
>>   config OMAP_REMOTEPROC
>>   	tristate "OMAP remoteproc support"
>>   	depends on ARCH_OMAP4 || SOC_OMAP5 || SOC_DRA7XX
>> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
>> index e8b886e511f0..2ea231b75fa6 100644
>> --- a/drivers/remoteproc/Makefile
>> +++ b/drivers/remoteproc/Makefile
>> @@ -12,6 +12,7 @@ remoteproc-y				+= remoteproc_elf_loader.o
>>   obj-$(CONFIG_IMX_REMOTEPROC)		+= imx_rproc.o
>>   obj-$(CONFIG_INGENIC_VPU_RPROC)		+= ingenic_rproc.o
>>   obj-$(CONFIG_MTK_SCP)			+= mtk_scp.o mtk_scp_ipi.o
>> +obj-$(CONFIG_MTK_APU)			+= mtk_apu_rproc.o
>>   obj-$(CONFIG_OMAP_REMOTEPROC)		+= omap_remoteproc.o
>>   obj-$(CONFIG_WKUP_M3_RPROC)		+= wkup_m3_rproc.o
>>   obj-$(CONFIG_DA8XX_REMOTEPROC)		+= da8xx_remoteproc.o
>> diff --git a/drivers/remoteproc/mtk_apu_rproc.c b/drivers/remoteproc/mtk_apu_rproc.c
>> new file mode 100644
>> index 000000000000..fb416a817ef3
>> --- /dev/null
>> +++ b/drivers/remoteproc/mtk_apu_rproc.c
>> @@ -0,0 +1,308 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2020 BayLibre SAS
>> + */
>> +
>> +#include <linux/bitops.h>
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/io.h>
>> +#include <linux/iommu.h>
>> +#include <linux/irq.h>
>> +#include <linux/kernel.h>
>> +#include <linux/highmem.h>
> Move this below "delay.h"
>
>> +#include <linux/module.h>
>> +#include <linux/of_reserved_mem.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/remoteproc.h>
>> +
>> +#include "remoteproc_internal.h"
>> +
>> +/* From MT8183 4.5 Vision Processor Unit (VPU).pdf datasheet */
>> +#define SW_RST					(0x0000000C)
>> +#define  SW_RST_OCD_HALT_ON_RST			BIT(12)
>> +#define  SW_RST_IPU_D_RST			BIT(8)
>> +#define  SW_RST_IPU_B_RST			BIT(4)
> Please don't indent defines.
>
>> +#define CORE_CTRL				(0x00000110)
>> +#define  CORE_CTRL_PDEBUG_ENABLE		BIT(31)
>> +#define	 CORE_CTRL_SRAM_64K_iMEM		(0x00 << 27)
>> +#define	 CORE_CTRL_SRAM_96K_iMEM		(0x01 << 27)
>> +#define	 CORE_CTRL_SRAM_128K_iMEM		(0x02 << 27)
>> +#define	 CORE_CTRL_SRAM_192K_iMEM		(0x03 << 27)
>> +#define	 CORE_CTRL_SRAM_256K_iMEM		(0x04 << 27)
>> +#define  CORE_CTRL_PBCLK_ENABLE			BIT(26)
>> +#define  CORE_CTRL_RUN_STALL			BIT(23)
>> +#define  CORE_CTRL_STATE_VECTOR_SELECT		BIT(19)
>> +#define  CORE_CTRL_PIF_GATED			BIT(17)
>> +#define  CORE_CTRL_NMI				BIT(0)
>> +#define CORE_XTENSA_INT				(0x00000114)
>> +#define CORE_CTL_XTENSA_INT			(0x00000118)
>> +#define CORE_DEFAULT0				(0x0000013C)
>> +#define  CORE_DEFAULT0_QOS_SWAP_0		(0x00 << 28)
>> +#define  CORE_DEFAULT0_QOS_SWAP_1		(0x01 << 28)
>> +#define  CORE_DEFAULT0_QOS_SWAP_2		(0x02 << 28)
>> +#define  CORE_DEFAULT0_QOS_SWAP_3		(0x03 << 28)
>> +#define  CORE_DEFAULT0_ARUSER_USE_IOMMU		(0x10 << 23)
>> +#define  CORE_DEFAULT0_AWUSER_USE_IOMMU		(0x10 << 18)
>> +#define CORE_DEFAULT1				(0x00000140)
>> +#define  CORE_DEFAULT0_ARUSER_IDMA_USE_IOMMU	(0x10 << 0)
>> +#define  CORE_DEFAULT0_AWUSER_IDMA_USE_IOMMU	(0x10 << 5)
>> +#define CORE_XTENSA_ALTRESETVEC			(0x000001F8)
>> +
>> +struct mtk_vpu_rproc {
>> +	struct device *dev;
>> +	struct rproc *rproc;
>> +
>> +	void __iomem *base;
>> +	int irq;
>> +	struct clk *axi;
>> +	struct clk *ipu;
>> +	struct clk *jtag;
>> +};
>> +
>> +static u32 vpu_read32(struct mtk_vpu_rproc *vpu_rproc, u32 off)
>> +{
>> +	return readl(vpu_rproc->base + off);
>> +}
>> +
>> +static void vpu_write32(struct mtk_vpu_rproc *vpu_rproc, u32 off, u32 value)
>> +{
>> +	writel(value, vpu_rproc->base + off);
>> +}
> Not sure that much is gained by adding the above two functions.  Just using
> readl/writel would suit me just fine.
I though this was more convenient to use but using readl/writel is also 
fine for me.
>> +
>> +static int mtk_vpu_rproc_start(struct rproc *rproc)
>> +{
>> +	struct mtk_vpu_rproc *vpu_rproc = rproc->priv;
>> +	u32 core_ctrl;
>> +
>> +	vpu_write32(vpu_rproc, CORE_XTENSA_ALTRESETVEC, rproc->bootaddr);
>> +
>> +	core_ctrl = vpu_read32(vpu_rproc, CORE_CTRL);
>> +	core_ctrl |= CORE_CTRL_PDEBUG_ENABLE | CORE_CTRL_PBCLK_ENABLE |
>> +		     CORE_CTRL_STATE_VECTOR_SELECT | CORE_CTRL_RUN_STALL |
>> +		     CORE_CTRL_PIF_GATED;
>> +	vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl);
>> +
>> +	vpu_write32(vpu_rproc, SW_RST, SW_RST_OCD_HALT_ON_RST |
>> +				       SW_RST_IPU_B_RST | SW_RST_IPU_D_RST);
>> +	ndelay(27);
> What is this for?  The state of the VPU can't be polled?

TBH, I don't know. I got the programming model from Mediatek's kernel.

I assumed that was the minimum time required to maintain reset asserted 
to make it effective.

>
>> +	vpu_write32(vpu_rproc, SW_RST, 0);
>> +
>> +	core_ctrl &= ~CORE_CTRL_PIF_GATED;
>> +	vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl);
>> +
>> +	vpu_write32(vpu_rproc, CORE_DEFAULT0, CORE_DEFAULT0_AWUSER_USE_IOMMU |
>> +					      CORE_DEFAULT0_ARUSER_USE_IOMMU |
>> +					      CORE_DEFAULT0_QOS_SWAP_1);
>> +	vpu_write32(vpu_rproc, CORE_DEFAULT1,
>> +		    CORE_DEFAULT0_AWUSER_IDMA_USE_IOMMU |
>> +		    CORE_DEFAULT0_ARUSER_IDMA_USE_IOMMU);
>> +
>> +	core_ctrl &= ~CORE_CTRL_RUN_STALL;
>> +	vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl);
> I would certainly appreciate more comments that describe that is going on in
> this function.
I will try to comment a little more but again, this come from Mediatek's 
kernel.
Even if I have access to the datasheet, there are no much details.
>
>> +
>> +	return 0;
>> +}
>> +
>> +static int mtk_vpu_rproc_stop(struct rproc *rproc)
>> +{
>> +	struct mtk_vpu_rproc *vpu_rproc = rproc->priv;
>> +	u32 core_ctrl;
>> +
>> +	core_ctrl = vpu_read32(vpu_rproc, CORE_CTRL);
>> +	vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl | CORE_CTRL_RUN_STALL);
>> +
>> +	return 0;
>> +}
>> +
>> +static void mtk_vpu_rproc_kick(struct rproc *rproc, int vqid)
>> +{
>> +	struct mtk_vpu_rproc *vpu_rproc = rproc->priv;
>> +
>> +	vpu_write32(vpu_rproc, CORE_CTL_XTENSA_INT, 1 << vqid);
>> +}
>> +
>> +static const struct rproc_ops mtk_vpu_rproc_ops = {
>> +	.start		= mtk_vpu_rproc_start,
>> +	.stop		= mtk_vpu_rproc_stop,
>> +	.kick		= mtk_vpu_rproc_kick,
>> +};
>> +
>> +static irqreturn_t mtk_vpu_rproc_callback(int irq, void *data)
>> +{
>> +	struct rproc *rproc = (struct rproc *)data;
> There is no need to cast when working with a void pointer.  The same comment
> applies throughout.
>
>> +	struct mtk_vpu_rproc *vpu_rproc = (struct mtk_vpu_rproc *)rproc->priv;
>> +
>> +	vpu_write32(vpu_rproc, CORE_XTENSA_INT, 1);
>> +
>> +	return IRQ_WAKE_THREAD;
>> +}
>> +
>> +static irqreturn_t handle_event(int irq, void *data)
>> +{
>> +	struct rproc *rproc = (struct rproc *)data;
>> +
>> +	rproc_vq_interrupt(rproc, 0);
>> +	rproc_vq_interrupt(rproc, 1);
>> +
>> +	return IRQ_HANDLED;
>> +}
>> +
>> +static int mtk_vpu_rproc_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct mtk_vpu_rproc *vpu_rproc;
>> +	struct rproc *rproc;
>> +	struct resource *res;
>> +	int ret;
>> +
>> +	rproc = rproc_alloc(dev, "apu", &mtk_vpu_rproc_ops, NULL,
>> +			    sizeof(*vpu_rproc));
> The problem with hard coding the name of the remote process is that it work on
> only when there is a single processor.  Based on the DTS extention sent with
> this serie, there seems to be a possibility of having more the one.  As such
> both remote processor will be called "apu", mandating you to look at the
> platform resources to know which is which.  Consider using dev_name() or
> dev->of_node->name.
>
>> +	if (!rproc)
>> +		return -ENOMEM;
>> +
>> +	rproc->recovery_disabled = true;
>> +	rproc->has_iommu = false;
>> +
>> +	vpu_rproc = rproc->priv;
>> +	vpu_rproc->rproc = rproc;
>> +	vpu_rproc->dev = dev;
>> +
>> +	platform_set_drvdata(pdev, rproc);
>> +
>> +	rproc->domain = iommu_get_domain_for_dev(dev);
>> +	if (!rproc->domain) {
>> +		dev_err(dev, "Failed to get the IOMMU domain\n");
>> +		ret = -EINVAL;
>> +		goto free_rproc;
>> +	}
>> +
>> +
>> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +	vpu_rproc->base = devm_ioremap_resource(&pdev->dev, res);
>> +	if (IS_ERR(vpu_rproc->base)) {
>> +		dev_err(&pdev->dev, "Failed to map mmio\n");
> Above dev_err() is used with @dev while here @pdev->dev is.  Please pick one you
> like and stick with it.
>
>> +		ret = PTR_ERR(vpu_rproc->base);
>> +		goto free_rproc;
>> +	}
>> +
>> +	vpu_rproc->irq = platform_get_irq(pdev, 0);
>> +	if (vpu_rproc->irq < 0) {
>> +		ret = vpu_rproc->irq;
>> +		goto free_rproc;
>> +	}
>> +
>> +	ret = devm_request_threaded_irq(dev, vpu_rproc->irq,
>> +					mtk_vpu_rproc_callback, handle_event,
>> +					IRQF_SHARED | IRQF_ONESHOT,
>> +					"mtk_vpu-remoteproc", rproc);
> Same problem as above, i.e hard coding the name of the interrupt will be
> confusing when probing sysfs.  Here rproc->index holds the value that
> corresponds to 'X' in /sys/dev/class/remoteproc/remoteprocX.  Simply build a
> string using that and feed it to devm_request_threaded_ifq().
>
>
>> +	if (ret) {
>> +		dev_err(dev, "devm_request_threaded_irq error: %d\n", ret);
>> +		goto free_rproc;
>> +	}
>> +
>> +	vpu_rproc->ipu = devm_clk_get(dev, "ipu");
>> +	if (IS_ERR(vpu_rproc->ipu)) {
>> +		dev_err(dev, "Failed to get ipu clock\n");
>> +		ret = PTR_ERR(vpu_rproc->ipu);
>> +		goto free_rproc;
>> +	}
>> +
>> +	ret = clk_prepare_enable(vpu_rproc->ipu);
>> +	if (ret) {
>> +		dev_err(dev, "Failed to enable ipu clock\n");
>> +		goto free_rproc;
>> +	}
>> +
>> +	vpu_rproc->axi = devm_clk_get(dev, "axi");
>> +	if (IS_ERR(vpu_rproc->axi)) {
>> +		dev_err(dev, "Failed to get axi clock\n");
>> +		ret = PTR_ERR(vpu_rproc->axi);
>> +		goto clk_disable_ipu;
>> +	}
>> +
>> +	ret = clk_prepare_enable(vpu_rproc->axi);
>> +	if (ret) {
>> +		dev_err(dev, "Failed to enable axi clock\n");
>> +		goto clk_disable_ipu;
>> +	}a
> Please look at how Paul use the clock bulk API to deal with multiple clocs in
> ingenic_rproc.c and see if it is possible to use the same scheme.
I did not knew the bulk API. I think it should work.
>
>> +
>> +	vpu_rproc->jtag = devm_clk_get_optional(dev, "jtag");
> Why is the jtag clock optional when the binding document says that it "seems to
> be required to run the DSP, even when JTAG is not in use"?

I forget to change it to devm_clk_get when I figured out this was 
actually not optional.

Thanks,
Alexandre

>
>> +	if (IS_ERR(vpu_rproc->jtag)) {
>> +		dev_err(dev, "Failed to enable jtag clock\n");
>> +		ret = PTR_ERR(vpu_rproc->jtag);
>> +		goto clk_disable_axi;
>> +	}
>> +
>> +	ret = clk_prepare_enable(vpu_rproc->jtag);
>> +	if (ret) {
>> +		dev_err(dev, "Failed to enable jtag clock\n");
>> +		goto clk_disable_axi;
>> +	}
>> +
>> +	ret = of_reserved_mem_device_init(dev);
>> +	if (ret) {
>> +		dev_err(dev, "device does not have specific CMA pool\n");
>> +		goto clk_disable_jtag;
>> +	}
>> +
>> +	ret = rproc_add(rproc);
>> +	if (ret) {
>> +		dev_err(dev, "rproc_add failed: %d\n", ret);
>> +		goto free_mem;
>> +	}
>> +
>> +	return 0;
>> +
>> +free_mem:
>> +	of_reserved_mem_device_release(dev);
>> +clk_disable_jtag:
>> +	clk_disable_unprepare(vpu_rproc->jtag);
>> +clk_disable_axi:
>> +	clk_disable_unprepare(vpu_rproc->axi);
>> +clk_disable_ipu:
>> +	clk_disable_unprepare(vpu_rproc->ipu);
>> +free_rproc:
>> +	rproc_free(rproc);
>> +
>> +	return ret;
>> +}
>> +
>> +static int mtk_vpu_rproc_remove(struct platform_device *pdev)
>> +{
>> +	struct rproc *rproc = platform_get_drvdata(pdev);
>> +	struct mtk_vpu_rproc *vpu_rproc = (struct mtk_vpu_rproc *)rproc->priv;
>> +	struct device *dev = &pdev->dev;
>> +
>> +	disable_irq(vpu_rproc->irq);
>> +
>> +	rproc_del(rproc);
>> +	of_reserved_mem_device_release(dev);
>> +	clk_disable_unprepare(vpu_rproc->jtag);
>> +	clk_disable_unprepare(vpu_rproc->axi);
>> +	clk_disable_unprepare(vpu_rproc->ipu);
>> +	rproc_free(rproc);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct of_device_id mtk_vpu_rproc_of_match[] __maybe_unused = {
> Why is "__maybe_unused" needed?
>
> Thanks,
> Mathieu
>
>
>> +	{ .compatible = "mediatek,mt8183-apu", },
>> +	{ /* sentinel */ },
>> +};
>> +MODULE_DEVICE_TABLE(of, mtk_vpu_rproc_of_match);
>> +
>> +static struct platform_driver mtk_vpu_rproc_driver = {
>> +	.probe = mtk_vpu_rproc_probe,
>> +	.remove = mtk_vpu_rproc_remove,
>> +	.driver = {
>> +		.name = "mtk_vpu-rproc",
>> +		.of_match_table = of_match_ptr(mtk_vpu_rproc_of_match),
>> +	},
>> +};
>> +module_platform_driver(mtk_vpu_rproc_driver);
>> +
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_AUTHOR("Alexandre Bailon");
>> +MODULE_DESCRIPTION("Mt8183 VPU Remote Processor control driver");
>> -- 
>> 2.26.2
>>
diff mbox series

Patch

diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index c4d1731295eb..e116d4a12ac3 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -42,6 +42,16 @@  config MTK_SCP
 
 	  It's safe to say N here.
 
+config MTK_APU
+	tristate "Mediatek APU remoteproc support"
+	depends on ARCH_MEDIATEK
+	depends on MTK_IOMMU
+	help
+	  Say y to support the Mediatek's Accelerated Processing Unit (APU) via
+	  the remote processor framework.
+
+	  It's safe to say N here.
+
 config OMAP_REMOTEPROC
 	tristate "OMAP remoteproc support"
 	depends on ARCH_OMAP4 || SOC_OMAP5 || SOC_DRA7XX
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index e8b886e511f0..2ea231b75fa6 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -12,6 +12,7 @@  remoteproc-y				+= remoteproc_elf_loader.o
 obj-$(CONFIG_IMX_REMOTEPROC)		+= imx_rproc.o
 obj-$(CONFIG_INGENIC_VPU_RPROC)		+= ingenic_rproc.o
 obj-$(CONFIG_MTK_SCP)			+= mtk_scp.o mtk_scp_ipi.o
+obj-$(CONFIG_MTK_APU)			+= mtk_apu_rproc.o
 obj-$(CONFIG_OMAP_REMOTEPROC)		+= omap_remoteproc.o
 obj-$(CONFIG_WKUP_M3_RPROC)		+= wkup_m3_rproc.o
 obj-$(CONFIG_DA8XX_REMOTEPROC)		+= da8xx_remoteproc.o
diff --git a/drivers/remoteproc/mtk_apu_rproc.c b/drivers/remoteproc/mtk_apu_rproc.c
new file mode 100644
index 000000000000..fb416a817ef3
--- /dev/null
+++ b/drivers/remoteproc/mtk_apu_rproc.c
@@ -0,0 +1,308 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 BayLibre SAS
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iommu.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+#include <linux/remoteproc.h>
+
+#include "remoteproc_internal.h"
+
+/* From MT8183 4.5 Vision Processor Unit (VPU).pdf datasheet */
+#define SW_RST					(0x0000000C)
+#define  SW_RST_OCD_HALT_ON_RST			BIT(12)
+#define  SW_RST_IPU_D_RST			BIT(8)
+#define  SW_RST_IPU_B_RST			BIT(4)
+#define CORE_CTRL				(0x00000110)
+#define  CORE_CTRL_PDEBUG_ENABLE		BIT(31)
+#define	 CORE_CTRL_SRAM_64K_iMEM		(0x00 << 27)
+#define	 CORE_CTRL_SRAM_96K_iMEM		(0x01 << 27)
+#define	 CORE_CTRL_SRAM_128K_iMEM		(0x02 << 27)
+#define	 CORE_CTRL_SRAM_192K_iMEM		(0x03 << 27)
+#define	 CORE_CTRL_SRAM_256K_iMEM		(0x04 << 27)
+#define  CORE_CTRL_PBCLK_ENABLE			BIT(26)
+#define  CORE_CTRL_RUN_STALL			BIT(23)
+#define  CORE_CTRL_STATE_VECTOR_SELECT		BIT(19)
+#define  CORE_CTRL_PIF_GATED			BIT(17)
+#define  CORE_CTRL_NMI				BIT(0)
+#define CORE_XTENSA_INT				(0x00000114)
+#define CORE_CTL_XTENSA_INT			(0x00000118)
+#define CORE_DEFAULT0				(0x0000013C)
+#define  CORE_DEFAULT0_QOS_SWAP_0		(0x00 << 28)
+#define  CORE_DEFAULT0_QOS_SWAP_1		(0x01 << 28)
+#define  CORE_DEFAULT0_QOS_SWAP_2		(0x02 << 28)
+#define  CORE_DEFAULT0_QOS_SWAP_3		(0x03 << 28)
+#define  CORE_DEFAULT0_ARUSER_USE_IOMMU		(0x10 << 23)
+#define  CORE_DEFAULT0_AWUSER_USE_IOMMU		(0x10 << 18)
+#define CORE_DEFAULT1				(0x00000140)
+#define  CORE_DEFAULT0_ARUSER_IDMA_USE_IOMMU	(0x10 << 0)
+#define  CORE_DEFAULT0_AWUSER_IDMA_USE_IOMMU	(0x10 << 5)
+#define CORE_XTENSA_ALTRESETVEC			(0x000001F8)
+
+struct mtk_vpu_rproc {
+	struct device *dev;
+	struct rproc *rproc;
+
+	void __iomem *base;
+	int irq;
+	struct clk *axi;
+	struct clk *ipu;
+	struct clk *jtag;
+};
+
+static u32 vpu_read32(struct mtk_vpu_rproc *vpu_rproc, u32 off)
+{
+	return readl(vpu_rproc->base + off);
+}
+
+static void vpu_write32(struct mtk_vpu_rproc *vpu_rproc, u32 off, u32 value)
+{
+	writel(value, vpu_rproc->base + off);
+}
+
+static int mtk_vpu_rproc_start(struct rproc *rproc)
+{
+	struct mtk_vpu_rproc *vpu_rproc = rproc->priv;
+	u32 core_ctrl;
+
+	vpu_write32(vpu_rproc, CORE_XTENSA_ALTRESETVEC, rproc->bootaddr);
+
+	core_ctrl = vpu_read32(vpu_rproc, CORE_CTRL);
+	core_ctrl |= CORE_CTRL_PDEBUG_ENABLE | CORE_CTRL_PBCLK_ENABLE |
+		     CORE_CTRL_STATE_VECTOR_SELECT | CORE_CTRL_RUN_STALL |
+		     CORE_CTRL_PIF_GATED;
+	vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl);
+
+	vpu_write32(vpu_rproc, SW_RST, SW_RST_OCD_HALT_ON_RST |
+				       SW_RST_IPU_B_RST | SW_RST_IPU_D_RST);
+	ndelay(27);
+	vpu_write32(vpu_rproc, SW_RST, 0);
+
+	core_ctrl &= ~CORE_CTRL_PIF_GATED;
+	vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl);
+
+	vpu_write32(vpu_rproc, CORE_DEFAULT0, CORE_DEFAULT0_AWUSER_USE_IOMMU |
+					      CORE_DEFAULT0_ARUSER_USE_IOMMU |
+					      CORE_DEFAULT0_QOS_SWAP_1);
+	vpu_write32(vpu_rproc, CORE_DEFAULT1,
+		    CORE_DEFAULT0_AWUSER_IDMA_USE_IOMMU |
+		    CORE_DEFAULT0_ARUSER_IDMA_USE_IOMMU);
+
+	core_ctrl &= ~CORE_CTRL_RUN_STALL;
+	vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl);
+
+	return 0;
+}
+
+static int mtk_vpu_rproc_stop(struct rproc *rproc)
+{
+	struct mtk_vpu_rproc *vpu_rproc = rproc->priv;
+	u32 core_ctrl;
+
+	core_ctrl = vpu_read32(vpu_rproc, CORE_CTRL);
+	vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl | CORE_CTRL_RUN_STALL);
+
+	return 0;
+}
+
+static void mtk_vpu_rproc_kick(struct rproc *rproc, int vqid)
+{
+	struct mtk_vpu_rproc *vpu_rproc = rproc->priv;
+
+	vpu_write32(vpu_rproc, CORE_CTL_XTENSA_INT, 1 << vqid);
+}
+
+static const struct rproc_ops mtk_vpu_rproc_ops = {
+	.start		= mtk_vpu_rproc_start,
+	.stop		= mtk_vpu_rproc_stop,
+	.kick		= mtk_vpu_rproc_kick,
+};
+
+static irqreturn_t mtk_vpu_rproc_callback(int irq, void *data)
+{
+	struct rproc *rproc = (struct rproc *)data;
+	struct mtk_vpu_rproc *vpu_rproc = (struct mtk_vpu_rproc *)rproc->priv;
+
+	vpu_write32(vpu_rproc, CORE_XTENSA_INT, 1);
+
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t handle_event(int irq, void *data)
+{
+	struct rproc *rproc = (struct rproc *)data;
+
+	rproc_vq_interrupt(rproc, 0);
+	rproc_vq_interrupt(rproc, 1);
+
+	return IRQ_HANDLED;
+}
+
+static int mtk_vpu_rproc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mtk_vpu_rproc *vpu_rproc;
+	struct rproc *rproc;
+	struct resource *res;
+	int ret;
+
+	rproc = rproc_alloc(dev, "apu", &mtk_vpu_rproc_ops, NULL,
+			    sizeof(*vpu_rproc));
+	if (!rproc)
+		return -ENOMEM;
+
+	rproc->recovery_disabled = true;
+	rproc->has_iommu = false;
+
+	vpu_rproc = rproc->priv;
+	vpu_rproc->rproc = rproc;
+	vpu_rproc->dev = dev;
+
+	platform_set_drvdata(pdev, rproc);
+
+	rproc->domain = iommu_get_domain_for_dev(dev);
+	if (!rproc->domain) {
+		dev_err(dev, "Failed to get the IOMMU domain\n");
+		ret = -EINVAL;
+		goto free_rproc;
+	}
+
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	vpu_rproc->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(vpu_rproc->base)) {
+		dev_err(&pdev->dev, "Failed to map mmio\n");
+		ret = PTR_ERR(vpu_rproc->base);
+		goto free_rproc;
+	}
+
+	vpu_rproc->irq = platform_get_irq(pdev, 0);
+	if (vpu_rproc->irq < 0) {
+		ret = vpu_rproc->irq;
+		goto free_rproc;
+	}
+
+	ret = devm_request_threaded_irq(dev, vpu_rproc->irq,
+					mtk_vpu_rproc_callback, handle_event,
+					IRQF_SHARED | IRQF_ONESHOT,
+					"mtk_vpu-remoteproc", rproc);
+	if (ret) {
+		dev_err(dev, "devm_request_threaded_irq error: %d\n", ret);
+		goto free_rproc;
+	}
+
+	vpu_rproc->ipu = devm_clk_get(dev, "ipu");
+	if (IS_ERR(vpu_rproc->ipu)) {
+		dev_err(dev, "Failed to get ipu clock\n");
+		ret = PTR_ERR(vpu_rproc->ipu);
+		goto free_rproc;
+	}
+
+	ret = clk_prepare_enable(vpu_rproc->ipu);
+	if (ret) {
+		dev_err(dev, "Failed to enable ipu clock\n");
+		goto free_rproc;
+	}
+
+	vpu_rproc->axi = devm_clk_get(dev, "axi");
+	if (IS_ERR(vpu_rproc->axi)) {
+		dev_err(dev, "Failed to get axi clock\n");
+		ret = PTR_ERR(vpu_rproc->axi);
+		goto clk_disable_ipu;
+	}
+
+	ret = clk_prepare_enable(vpu_rproc->axi);
+	if (ret) {
+		dev_err(dev, "Failed to enable axi clock\n");
+		goto clk_disable_ipu;
+	}
+
+	vpu_rproc->jtag = devm_clk_get_optional(dev, "jtag");
+	if (IS_ERR(vpu_rproc->jtag)) {
+		dev_err(dev, "Failed to enable jtag clock\n");
+		ret = PTR_ERR(vpu_rproc->jtag);
+		goto clk_disable_axi;
+	}
+
+	ret = clk_prepare_enable(vpu_rproc->jtag);
+	if (ret) {
+		dev_err(dev, "Failed to enable jtag clock\n");
+		goto clk_disable_axi;
+	}
+
+	ret = of_reserved_mem_device_init(dev);
+	if (ret) {
+		dev_err(dev, "device does not have specific CMA pool\n");
+		goto clk_disable_jtag;
+	}
+
+	ret = rproc_add(rproc);
+	if (ret) {
+		dev_err(dev, "rproc_add failed: %d\n", ret);
+		goto free_mem;
+	}
+
+	return 0;
+
+free_mem:
+	of_reserved_mem_device_release(dev);
+clk_disable_jtag:
+	clk_disable_unprepare(vpu_rproc->jtag);
+clk_disable_axi:
+	clk_disable_unprepare(vpu_rproc->axi);
+clk_disable_ipu:
+	clk_disable_unprepare(vpu_rproc->ipu);
+free_rproc:
+	rproc_free(rproc);
+
+	return ret;
+}
+
+static int mtk_vpu_rproc_remove(struct platform_device *pdev)
+{
+	struct rproc *rproc = platform_get_drvdata(pdev);
+	struct mtk_vpu_rproc *vpu_rproc = (struct mtk_vpu_rproc *)rproc->priv;
+	struct device *dev = &pdev->dev;
+
+	disable_irq(vpu_rproc->irq);
+
+	rproc_del(rproc);
+	of_reserved_mem_device_release(dev);
+	clk_disable_unprepare(vpu_rproc->jtag);
+	clk_disable_unprepare(vpu_rproc->axi);
+	clk_disable_unprepare(vpu_rproc->ipu);
+	rproc_free(rproc);
+
+	return 0;
+}
+
+static const struct of_device_id mtk_vpu_rproc_of_match[] __maybe_unused = {
+	{ .compatible = "mediatek,mt8183-apu", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mtk_vpu_rproc_of_match);
+
+static struct platform_driver mtk_vpu_rproc_driver = {
+	.probe = mtk_vpu_rproc_probe,
+	.remove = mtk_vpu_rproc_remove,
+	.driver = {
+		.name = "mtk_vpu-rproc",
+		.of_match_table = of_match_ptr(mtk_vpu_rproc_of_match),
+	},
+};
+module_platform_driver(mtk_vpu_rproc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Alexandre Bailon");
+MODULE_DESCRIPTION("Mt8183 VPU Remote Processor control driver");