| Message ID | 20200725181404.18951-3-ansuelsmth@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for ipq8064 tsens | expand |
On Sat, Jul 25, 2020 at 11:44 PM Ansuel Smith <ansuelsmth@gmail.com> wrote: > > Covert msm9860 driver to reg_filed to use the init_common typo: field > function. > > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> > --- > drivers/thermal/qcom/tsens-8960.c | 74 +++++++++++++++++++++++++++++++ > 1 file changed, 74 insertions(+) > > diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c > index 2a28a5af209e..45cd0cdff2f5 100644 > --- a/drivers/thermal/qcom/tsens-8960.c > +++ b/drivers/thermal/qcom/tsens-8960.c > @@ -56,6 +56,18 @@ > #define TRDY_MASK BIT(7) > #define TIMEOUT_US 100 > > +#define S0_STATUS_OFF 0x3628 > +#define S1_STATUS_OFF 0x362c > +#define S2_STATUS_OFF 0x3630 > +#define S3_STATUS_OFF 0x3634 > +#define S4_STATUS_OFF 0x3638 > +#define S5_STATUS_OFF 0x3664 /* Sensors 5 thru 10 found on apq8064/msm8960 */ Run checkpatch and fix spelling. :-) Or just say 'sensor 5-10' > +#define S6_STATUS_OFF 0x3668 > +#define S7_STATUS_OFF 0x366c > +#define S8_STATUS_OFF 0x3670 > +#define S9_STATUS_OFF 0x3674 > +#define S10_STATUS_OFF 0x3678 > + > static int suspend_8960(struct tsens_priv *priv) > { > int ret; > @@ -269,6 +281,66 @@ static int get_temp_8960(const struct tsens_sensor *s, int *temp) > return -ETIMEDOUT; > } > > +static struct tsens_features tsens_8960_feat = { > + .ver_major = VER_0, > + .crit_int = 0, > + .adc = 1, > + .srot_split = 0, > + .max_sensors = 11, Align the equal to like in other files please. > +}; > + > +static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = { > + /* ----- SROT ------ */ > + /* No VERSION information */ > + > + /* CNTL */ > + [TSENS_EN] = REG_FIELD(CNTL_ADDR, 0, 0), > + [TSENS_SW_RST] = REG_FIELD(CNTL_ADDR, 1, 1), > + /* 8960 has 5 sensors, 8660 has 11, we only handle 5 */ > + [SENSOR_EN] = REG_FIELD(CNTL_ADDR, 3, 7), > + > + /* ----- TM ------ */ > + /* INTERRUPT ENABLE */ > + // [INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 0), Get rid of these comments and at the very least use C-style comments. > + > + /* Single UPPER/LOWER TEMPERATURE THRESHOLD for all sensors */ > + [LOW_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 0, 7), > + [UP_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 8, 15), > + [MIN_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 16, 23), > + [MAX_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 24, 31), > + > + // /* UPPER/LOWER INTERRUPT [CLEAR/STATUS] */ > + // /* 1 == clear, 0 == normal operation */ Get rid of these comments and at the very least use C-style comments. > + [LOW_INT_CLEAR_0] = REG_FIELD(CNTL_ADDR, 9, 9), > + [UP_INT_CLEAR_0] = REG_FIELD(CNTL_ADDR, 10, 10), > + > + /* NO CRITICAL INTERRUPT SUPPORT on 8960 */ > + > + /* Sn_STATUS */ > + [LAST_TEMP_0] = REG_FIELD(S0_STATUS_OFF, 0, 7), > + [LAST_TEMP_1] = REG_FIELD(S1_STATUS_OFF, 0, 7), > + [LAST_TEMP_2] = REG_FIELD(S2_STATUS_OFF, 0, 7), > + [LAST_TEMP_3] = REG_FIELD(S3_STATUS_OFF, 0, 7), > + [LAST_TEMP_4] = REG_FIELD(S4_STATUS_OFF, 0, 7), > + [LAST_TEMP_5] = REG_FIELD(S5_STATUS_OFF, 0, 7), > + [LAST_TEMP_6] = REG_FIELD(S6_STATUS_OFF, 0, 7), > + [LAST_TEMP_7] = REG_FIELD(S7_STATUS_OFF, 0, 7), > + [LAST_TEMP_8] = REG_FIELD(S8_STATUS_OFF, 0, 7), > + [LAST_TEMP_9] = REG_FIELD(S9_STATUS_OFF, 0, 7), > + [LAST_TEMP_10] = REG_FIELD(S10_STATUS_OFF, 0, 7), > + > + /* No VALID field on 8960 */ > + /* TSENS_INT_STATUS bits: 1 == threshold violated */ > + [MIN_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 0, 0), > + [LOWER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 1, 1), > + [UPPER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 2, 2), > + /* No CRITICAL field on 8960 */ > + [MAX_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 3, 3), > + > + /* TRDY: 1=ready, 0=in progress */ > + [TRDY] = REG_FIELD(INT_STATUS_ADDR, 7, 7), > +}; > + > static const struct tsens_ops ops_8960 = { > .init = init_8960, > .calibrate = calibrate_8960, > @@ -282,4 +354,6 @@ static const struct tsens_ops ops_8960 = { > struct tsens_plat_data data_8960 = { > .num_sensors = 11, > .ops = &ops_8960, > + .feat = &tsens_8960_feat, > + .fields = tsens_8960_regfields, > }; > -- > 2.27.0 >
diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c index 2a28a5af209e..45cd0cdff2f5 100644 --- a/drivers/thermal/qcom/tsens-8960.c +++ b/drivers/thermal/qcom/tsens-8960.c @@ -56,6 +56,18 @@ #define TRDY_MASK BIT(7) #define TIMEOUT_US 100 +#define S0_STATUS_OFF 0x3628 +#define S1_STATUS_OFF 0x362c +#define S2_STATUS_OFF 0x3630 +#define S3_STATUS_OFF 0x3634 +#define S4_STATUS_OFF 0x3638 +#define S5_STATUS_OFF 0x3664 /* Sensors 5 thru 10 found on apq8064/msm8960 */ +#define S6_STATUS_OFF 0x3668 +#define S7_STATUS_OFF 0x366c +#define S8_STATUS_OFF 0x3670 +#define S9_STATUS_OFF 0x3674 +#define S10_STATUS_OFF 0x3678 + static int suspend_8960(struct tsens_priv *priv) { int ret; @@ -269,6 +281,66 @@ static int get_temp_8960(const struct tsens_sensor *s, int *temp) return -ETIMEDOUT; } +static struct tsens_features tsens_8960_feat = { + .ver_major = VER_0, + .crit_int = 0, + .adc = 1, + .srot_split = 0, + .max_sensors = 11, +}; + +static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = { + /* ----- SROT ------ */ + /* No VERSION information */ + + /* CNTL */ + [TSENS_EN] = REG_FIELD(CNTL_ADDR, 0, 0), + [TSENS_SW_RST] = REG_FIELD(CNTL_ADDR, 1, 1), + /* 8960 has 5 sensors, 8660 has 11, we only handle 5 */ + [SENSOR_EN] = REG_FIELD(CNTL_ADDR, 3, 7), + + /* ----- TM ------ */ + /* INTERRUPT ENABLE */ + // [INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 0), + + /* Single UPPER/LOWER TEMPERATURE THRESHOLD for all sensors */ + [LOW_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 0, 7), + [UP_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 8, 15), + [MIN_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 16, 23), + [MAX_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 24, 31), + + // /* UPPER/LOWER INTERRUPT [CLEAR/STATUS] */ + // /* 1 == clear, 0 == normal operation */ + [LOW_INT_CLEAR_0] = REG_FIELD(CNTL_ADDR, 9, 9), + [UP_INT_CLEAR_0] = REG_FIELD(CNTL_ADDR, 10, 10), + + /* NO CRITICAL INTERRUPT SUPPORT on 8960 */ + + /* Sn_STATUS */ + [LAST_TEMP_0] = REG_FIELD(S0_STATUS_OFF, 0, 7), + [LAST_TEMP_1] = REG_FIELD(S1_STATUS_OFF, 0, 7), + [LAST_TEMP_2] = REG_FIELD(S2_STATUS_OFF, 0, 7), + [LAST_TEMP_3] = REG_FIELD(S3_STATUS_OFF, 0, 7), + [LAST_TEMP_4] = REG_FIELD(S4_STATUS_OFF, 0, 7), + [LAST_TEMP_5] = REG_FIELD(S5_STATUS_OFF, 0, 7), + [LAST_TEMP_6] = REG_FIELD(S6_STATUS_OFF, 0, 7), + [LAST_TEMP_7] = REG_FIELD(S7_STATUS_OFF, 0, 7), + [LAST_TEMP_8] = REG_FIELD(S8_STATUS_OFF, 0, 7), + [LAST_TEMP_9] = REG_FIELD(S9_STATUS_OFF, 0, 7), + [LAST_TEMP_10] = REG_FIELD(S10_STATUS_OFF, 0, 7), + + /* No VALID field on 8960 */ + /* TSENS_INT_STATUS bits: 1 == threshold violated */ + [MIN_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 0, 0), + [LOWER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 1, 1), + [UPPER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 2, 2), + /* No CRITICAL field on 8960 */ + [MAX_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 3, 3), + + /* TRDY: 1=ready, 0=in progress */ + [TRDY] = REG_FIELD(INT_STATUS_ADDR, 7, 7), +}; + static const struct tsens_ops ops_8960 = { .init = init_8960, .calibrate = calibrate_8960, @@ -282,4 +354,6 @@ static const struct tsens_ops ops_8960 = { struct tsens_plat_data data_8960 = { .num_sensors = 11, .ops = &ops_8960, + .feat = &tsens_8960_feat, + .fields = tsens_8960_regfields, };
Covert msm9860 driver to reg_filed to use the init_common function. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> --- drivers/thermal/qcom/tsens-8960.c | 74 +++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+)