diff mbox series

[v2,7/7] x86: don't include domctl and alike in shim-exclusive builds

Message ID be0dbe7b-3feb-1a5b-b523-2293a7442707@suse.com (mailing list archive)
State Superseded
Headers show
Series x86: build adjustments | expand

Commit Message

Jan Beulich Aug. 7, 2020, 11:35 a.m. UTC 
There is no need for platform-wide, system-wide, or per-domain control
in this case. Hence avoid including this dead code in the build.

Signed-off-by: Jan Beulich <jbeulich@suse.com>

Comments

Roger Pau Monne Aug. 18, 2020, 1:08 p.m. UTC | #1 
On Fri, Aug 07, 2020 at 01:35:08PM +0200, Jan Beulich wrote:
> There is no need for platform-wide, system-wide, or per-domain control
> in this case. Hence avoid including this dead code in the build.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>

Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>

One comment below.

> 
> --- a/xen/arch/x86/Makefile
> +++ b/xen/arch/x86/Makefile
> @@ -23,7 +23,6 @@ obj-$(CONFIG_GDBSX) += debug.o
>  obj-y += delay.o
>  obj-y += desc.o
>  obj-bin-y += dmi_scan.init.o
> -obj-y += domctl.o
>  obj-y += domain.o
>  obj-bin-y += dom0_build.init.o
>  obj-y += domain_page.o
> @@ -51,7 +50,6 @@ obj-y += numa.o
>  obj-y += pci.o
>  obj-y += percpu.o
>  obj-y += physdev.o x86_64/physdev.o
> -obj-y += platform_hypercall.o x86_64/platform_hypercall.o
>  obj-y += psr.o
>  obj-y += setup.o
>  obj-y += shutdown.o
> @@ -60,7 +58,6 @@ obj-y += smpboot.o
>  obj-y += spec_ctrl.o
>  obj-y += srat.o
>  obj-y += string.o
> -obj-y += sysctl.o
>  obj-y += time.o
>  obj-y += trace.o
>  obj-y += traps.o
> @@ -71,6 +68,13 @@ obj-$(CONFIG_TBOOT) += tboot.o
>  obj-y += hpet.o
>  obj-y += vm_event.o
>  obj-y += xstate.o
> +
> +ifneq ($(CONFIG_PV_SHIM_EXCLUSIVE),y)
> +obj-y += domctl.o
> +obj-y += platform_hypercall.o x86_64/platform_hypercall.o
> +obj-y += sysctl.o
> +endif
> +
>  extra-y += asm-macros.i
>  
>  ifneq ($(CONFIG_HVM),y)
> --- a/xen/arch/x86/mm/paging.c
> +++ b/xen/arch/x86/mm/paging.c
> @@ -47,6 +47,8 @@
>  /* Per-CPU variable for enforcing the lock ordering */
>  DEFINE_PER_CPU(int, mm_lock_level);
>  
> +#ifndef CONFIG_PV_SHIM_EXCLUSIVE
> +
>  /************************************************/
>  /*              LOG DIRTY SUPPORT               */
>  /************************************************/
> @@ -628,6 +630,8 @@ void paging_log_dirty_init(struct domain
>      d->arch.paging.log_dirty.ops = ops;
>  }
>  
> +#endif /* CONFIG_PV_SHIM_EXCLUSIVE */
> +
>  /************************************************/
>  /*           CODE FOR PAGING SUPPORT            */
>  /************************************************/
> @@ -667,7 +671,7 @@ void paging_vcpu_init(struct vcpu *v)
>          shadow_vcpu_init(v);
>  }
>  
> -
> +#ifndef CONFIG_PV_SHIM_EXCLUSIVE
>  int paging_domctl(struct domain *d, struct xen_domctl_shadow_op *sc,
>                    XEN_GUEST_HANDLE_PARAM(xen_domctl_t) u_domctl,
>                    bool_t resuming)
> @@ -788,6 +792,7 @@ long paging_domctl_continuation(XEN_GUES
>  
>      return ret;
>  }
> +#endif /* CONFIG_PV_SHIM_EXCLUSIVE */
>  
>  /* Call when destroying a domain */
>  int paging_teardown(struct domain *d)
> @@ -803,10 +808,12 @@ int paging_teardown(struct domain *d)
>      if ( preempted )
>          return -ERESTART;
>  
> +#ifndef CONFIG_PV_SHIM_EXCLUSIVE
>      /* clean up log dirty resources. */
>      rc = paging_free_log_dirty_bitmap(d, 0);
>      if ( rc == -ERESTART )
>          return rc;
> +#endif

Adding all this ifndefs make the code worse IMO, is it really that much
of a win in terms of size?

TBH I'm not sure it's worth it.

Thanks, Roger.
Jan Beulich Aug. 19, 2020, 7:37 a.m. UTC | #2 
On 18.08.2020 15:08, Roger Pau Monné wrote:
> On Fri, Aug 07, 2020 at 01:35:08PM +0200, Jan Beulich wrote:
>> There is no need for platform-wide, system-wide, or per-domain control
>> in this case. Hence avoid including this dead code in the build.
>>
>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> 
> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>

Thanks.

>> --- a/xen/arch/x86/mm/paging.c
>> +++ b/xen/arch/x86/mm/paging.c
>> @@ -47,6 +47,8 @@
>>  /* Per-CPU variable for enforcing the lock ordering */
>>  DEFINE_PER_CPU(int, mm_lock_level);
>>  
>> +#ifndef CONFIG_PV_SHIM_EXCLUSIVE
>> +
>>  /************************************************/
>>  /*              LOG DIRTY SUPPORT               */
>>  /************************************************/
>> @@ -628,6 +630,8 @@ void paging_log_dirty_init(struct domain
>>      d->arch.paging.log_dirty.ops = ops;
>>  }
>>  
>> +#endif /* CONFIG_PV_SHIM_EXCLUSIVE */
>> +
>>  /************************************************/
>>  /*           CODE FOR PAGING SUPPORT            */
>>  /************************************************/
>> @@ -667,7 +671,7 @@ void paging_vcpu_init(struct vcpu *v)
>>          shadow_vcpu_init(v);
>>  }
>>  
>> -
>> +#ifndef CONFIG_PV_SHIM_EXCLUSIVE
>>  int paging_domctl(struct domain *d, struct xen_domctl_shadow_op *sc,
>>                    XEN_GUEST_HANDLE_PARAM(xen_domctl_t) u_domctl,
>>                    bool_t resuming)
>> @@ -788,6 +792,7 @@ long paging_domctl_continuation(XEN_GUES
>>  
>>      return ret;
>>  }
>> +#endif /* CONFIG_PV_SHIM_EXCLUSIVE */
>>  
>>  /* Call when destroying a domain */
>>  int paging_teardown(struct domain *d)
>> @@ -803,10 +808,12 @@ int paging_teardown(struct domain *d)
>>      if ( preempted )
>>          return -ERESTART;
>>  
>> +#ifndef CONFIG_PV_SHIM_EXCLUSIVE
>>      /* clean up log dirty resources. */
>>      rc = paging_free_log_dirty_bitmap(d, 0);
>>      if ( rc == -ERESTART )
>>          return rc;
>> +#endif
> 
> Adding all this ifndefs make the code worse IMO, is it really that much
> of a win in terms of size?
> 
> TBH I'm not sure it's worth it.

Without these the entire patch would need dropping, and excluding
domctl / sysctl in general is useful imo (I didn't even go check
whether further code has now ended up being dead, that'll be
incremental work over time). I agree the #ifdef-ary isn't ideal,
and I'd be happy to see some or all of it go away again in favor
of whichever better solution.

Jan
diff mbox series

Patch

--- a/xen/arch/x86/Makefile
+++ b/xen/arch/x86/Makefile
@@ -23,7 +23,6 @@  obj-$(CONFIG_GDBSX) += debug.o
 obj-y += delay.o
 obj-y += desc.o
 obj-bin-y += dmi_scan.init.o
-obj-y += domctl.o
 obj-y += domain.o
 obj-bin-y += dom0_build.init.o
 obj-y += domain_page.o
@@ -51,7 +50,6 @@  obj-y += numa.o
 obj-y += pci.o
 obj-y += percpu.o
 obj-y += physdev.o x86_64/physdev.o
-obj-y += platform_hypercall.o x86_64/platform_hypercall.o
 obj-y += psr.o
 obj-y += setup.o
 obj-y += shutdown.o
@@ -60,7 +58,6 @@  obj-y += smpboot.o
 obj-y += spec_ctrl.o
 obj-y += srat.o
 obj-y += string.o
-obj-y += sysctl.o
 obj-y += time.o
 obj-y += trace.o
 obj-y += traps.o
@@ -71,6 +68,13 @@  obj-$(CONFIG_TBOOT) += tboot.o
 obj-y += hpet.o
 obj-y += vm_event.o
 obj-y += xstate.o
+
+ifneq ($(CONFIG_PV_SHIM_EXCLUSIVE),y)
+obj-y += domctl.o
+obj-y += platform_hypercall.o x86_64/platform_hypercall.o
+obj-y += sysctl.o
+endif
+
 extra-y += asm-macros.i
 
 ifneq ($(CONFIG_HVM),y)
--- a/xen/arch/x86/mm/paging.c
+++ b/xen/arch/x86/mm/paging.c
@@ -47,6 +47,8 @@ 
 /* Per-CPU variable for enforcing the lock ordering */
 DEFINE_PER_CPU(int, mm_lock_level);
 
+#ifndef CONFIG_PV_SHIM_EXCLUSIVE
+
 /************************************************/
 /*              LOG DIRTY SUPPORT               */
 /************************************************/
@@ -628,6 +630,8 @@  void paging_log_dirty_init(struct domain
     d->arch.paging.log_dirty.ops = ops;
 }
 
+#endif /* CONFIG_PV_SHIM_EXCLUSIVE */
+
 /************************************************/
 /*           CODE FOR PAGING SUPPORT            */
 /************************************************/
@@ -667,7 +671,7 @@  void paging_vcpu_init(struct vcpu *v)
         shadow_vcpu_init(v);
 }
 
-
+#ifndef CONFIG_PV_SHIM_EXCLUSIVE
 int paging_domctl(struct domain *d, struct xen_domctl_shadow_op *sc,
                   XEN_GUEST_HANDLE_PARAM(xen_domctl_t) u_domctl,
                   bool_t resuming)
@@ -788,6 +792,7 @@  long paging_domctl_continuation(XEN_GUES
 
     return ret;
 }
+#endif /* CONFIG_PV_SHIM_EXCLUSIVE */
 
 /* Call when destroying a domain */
 int paging_teardown(struct domain *d)
@@ -803,10 +808,12 @@  int paging_teardown(struct domain *d)
     if ( preempted )
         return -ERESTART;
 
+#ifndef CONFIG_PV_SHIM_EXCLUSIVE
     /* clean up log dirty resources. */
     rc = paging_free_log_dirty_bitmap(d, 0);
     if ( rc == -ERESTART )
         return rc;
+#endif
 
     /* Move populate-on-demand cache back to domain_list for destruction */
     rc = p2m_pod_empty_cache(d);
--- a/xen/arch/x86/pv/hypercall.c
+++ b/xen/arch/x86/pv/hypercall.c
@@ -42,7 +42,9 @@  const hypercall_table_t pv_hypercall_tab
     COMPAT_CALL(set_callbacks),
     HYPERCALL(fpu_taskswitch),
     HYPERCALL(sched_op_compat),
+#ifndef CONFIG_PV_SHIM_EXCLUSIVE
     COMPAT_CALL(platform_op),
+#endif
     HYPERCALL(set_debugreg),
     HYPERCALL(get_debugreg),
     COMPAT_CALL(update_descriptor),
@@ -72,8 +74,10 @@  const hypercall_table_t pv_hypercall_tab
 #endif
     HYPERCALL(event_channel_op),
     COMPAT_CALL(physdev_op),
+#ifndef CONFIG_PV_SHIM_EXCLUSIVE
     HYPERCALL(sysctl),
     HYPERCALL(domctl),
+#endif
 #ifdef CONFIG_KEXEC
     COMPAT_CALL(kexec_op),
 #endif
@@ -89,7 +93,9 @@  const hypercall_table_t pv_hypercall_tab
     HYPERCALL(hypfs_op),
 #endif
     HYPERCALL(mca),
+#ifndef CONFIG_PV_SHIM_EXCLUSIVE
     HYPERCALL(arch_1),
+#endif
 };
 
 #undef do_arch_1
--- a/xen/common/Makefile
+++ b/xen/common/Makefile
@@ -6,7 +6,6 @@  obj-$(CONFIG_CORE_PARKING) += core_parki
 obj-y += cpu.o
 obj-$(CONFIG_DEBUG_TRACE) += debugtrace.o
 obj-$(CONFIG_HAS_DEVICE_TREE) += device_tree.o
-obj-y += domctl.o
 obj-y += domain.o
 obj-y += event_2l.o
 obj-y += event_channel.o
@@ -26,7 +25,6 @@  obj-$(CONFIG_NEEDS_LIST_SORT) += list_so
 obj-$(CONFIG_LIVEPATCH) += livepatch.o livepatch_elf.o
 obj-$(CONFIG_MEM_ACCESS) += mem_access.o
 obj-y += memory.o
-obj-y += monitor.o
 obj-y += multicall.o
 obj-y += notifier.o
 obj-y += page_alloc.o
@@ -47,7 +45,6 @@  obj-y += spinlock.o
 obj-y += stop_machine.o
 obj-y += string.o
 obj-y += symbols.o
-obj-y += sysctl.o
 obj-y += tasklet.o
 obj-y += time.o
 obj-y += timer.o
@@ -66,6 +63,12 @@  obj-bin-$(CONFIG_X86) += $(foreach n,dec
 
 obj-$(CONFIG_COMPAT) += $(addprefix compat/,domain.o kernel.o memory.o multicall.o xlat.o)
 
+ifneq ($(CONFIG_PV_SHIM_EXCLUSIVE),y)
+obj-y += domctl.o
+obj-y += monitor.o
+obj-y += sysctl.o
+endif
+
 extra-y := symbols-dummy.o
 
 obj-$(CONFIG_COVERAGE) += coverage/
--- a/xen/include/asm-x86/paging.h
+++ b/xen/include/asm-x86/paging.h
@@ -154,6 +154,8 @@  struct paging_mode {
 /*****************************************************************************
  * Log dirty code */
 
+#ifndef CONFIG_PV_SHIM_EXCLUSIVE
+
 /* get the dirty bitmap for a specific range of pfns */
 void paging_log_dirty_range(struct domain *d,
                             unsigned long begin_pfn,
@@ -202,6 +204,15 @@  struct sh_dirty_vram {
     s_time_t last_dirty;
 };
 
+#else /* !CONFIG_PV_SHIM_EXCLUSIVE */
+
+static inline void paging_log_dirty_init(struct domain *d,
+                                         const struct log_dirty_ops *ops) {}
+static inline void paging_mark_dirty(struct domain *d, mfn_t gmfn) {}
+static inline void paging_mark_pfn_dirty(struct domain *d, pfn_t pfn) {}
+
+#endif /* CONFIG_PV_SHIM_EXCLUSIVE */
+
 /*****************************************************************************
  * Entry points into the paging-assistance code */
 
--- a/xen/include/xen/domain.h
+++ b/xen/include/xen/domain.h
@@ -125,6 +125,10 @@  struct vnuma_info {
     struct xen_vmemrange *vmemrange;
 };
 
+#ifndef CONFIG_PV_SHIM_EXCLUSIVE
 void vnuma_destroy(struct vnuma_info *vnuma);
+#else
+static inline void vnuma_destroy(struct vnuma_info *vnuma) { ASSERT(!vnuma); }
+#endif
 
 #endif /* __XEN_DOMAIN_H__ */