| Message ID | 20200904155513.282067-5-bjorn.andersson@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | iommu/arm-smmu: Support maintaining bootloader mappings | expand |
On 2020-09-04 21:25, Bjorn Andersson wrote: > Some firmware found on various Qualcomm platforms traps writes to S2CR > of type BYPASS and writes FAULT into the register. In particular, this > prevents us from marking the streams for the display controller as > BYPASS to allow continued scanout of the screen through the > initialization of the ARM SMMU. > > This adds a Qualcomm specific cfg_probe function, which probes for the > broken behavior of the S2CR registers and implements a custom > alloc_context_bank() that when necessary allocates a context bank > (without translation) for these domains as well. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > > Changes since v2: > - Move quirk from arm_smmudevice to qcom_smmu, as we localize the quirk > handling to the Qualcomm specific implemntation. > > drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 52 ++++++++++++++++++++++ > 1 file changed, 52 insertions(+) > > diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c > b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c > index 229fc8ff8cea..284761a1cd8e 100644 > --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c > +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c > @@ -11,8 +11,14 @@ > > struct qcom_smmu { > struct arm_smmu_device smmu; > + bool bypass_broken; > }; > > +static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu) > +{ > + return container_of(smmu, struct qcom_smmu, smmu); > +} > + > #define QCOM_ADRENO_SMMU_GPU_SID 0 > > static bool qcom_adreno_smmu_is_gpu_device(struct device *dev) > @@ -162,6 +168,50 @@ static const struct of_device_id > qcom_smmu_client_of_match[] __maybe_unused = { > { } > }; > > +static int qcom_smmu_alloc_context_bank(struct arm_smmu_domain > *smmu_domain, > + struct arm_smmu_device *smmu, > + struct device *dev, int start) > +{ > + struct iommu_domain *domain = &smmu_domain->domain; > + struct qcom_smmu *qsmmu = to_qcom_smmu(smmu); > + > + /* Keep identity domains as bypass, unless bypass is broken */ > + if (domain->type == IOMMU_DOMAIN_IDENTITY && !qsmmu->bypass_broken) > + return ARM_SMMU_CBNDX_BYPASS; > + > + /* > + * The identity domain to emulate bypass is the only domain without a > + * dev, use the last context bank for this to avoid collisions with > + * active contexts during initialization. > + */ > + if (!dev) > + start = smmu->num_context_banks - 1; > + > + return __arm_smmu_alloc_bitmap(smmu->context_map, start, > smmu->num_context_banks); > +} > + > +static int qcom_smmu_cfg_probe(struct arm_smmu_device *smmu) > +{ > + unsigned int last_s2cr = ARM_SMMU_GR0_S2CR(smmu->num_mapping_groups - > 1); > + struct qcom_smmu *qsmmu = to_qcom_smmu(smmu); > + u32 reg; > + > + /* > + * With some firmware writes to S2CR of type FAULT are ignored, and > + * writing BYPASS will end up as FAULT in the register. Perform a > write > + * to S2CR to detect if this is the case with the current firmware. > + */ > + reg = FIELD_PREP(ARM_SMMU_S2CR_TYPE, S2CR_TYPE_BYPASS) | > + FIELD_PREP(ARM_SMMU_S2CR_CBNDX, 0xff) | > + FIELD_PREP(ARM_SMMU_S2CR_PRIVCFG, S2CR_PRIVCFG_DEFAULT); > + arm_smmu_gr0_write(smmu, last_s2cr, reg); > + reg = arm_smmu_gr0_read(smmu, last_s2cr); > + if (FIELD_GET(ARM_SMMU_S2CR_TYPE, reg) != S2CR_TYPE_BYPASS) > + qsmmu->bypass_broken = true; > + Clever :) Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c index 229fc8ff8cea..284761a1cd8e 100644 --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c @@ -11,8 +11,14 @@ struct qcom_smmu { struct arm_smmu_device smmu; + bool bypass_broken; }; +static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu) +{ + return container_of(smmu, struct qcom_smmu, smmu); +} + #define QCOM_ADRENO_SMMU_GPU_SID 0 static bool qcom_adreno_smmu_is_gpu_device(struct device *dev) @@ -162,6 +168,50 @@ static const struct of_device_id qcom_smmu_client_of_match[] __maybe_unused = { { } }; +static int qcom_smmu_alloc_context_bank(struct arm_smmu_domain *smmu_domain, + struct arm_smmu_device *smmu, + struct device *dev, int start) +{ + struct iommu_domain *domain = &smmu_domain->domain; + struct qcom_smmu *qsmmu = to_qcom_smmu(smmu); + + /* Keep identity domains as bypass, unless bypass is broken */ + if (domain->type == IOMMU_DOMAIN_IDENTITY && !qsmmu->bypass_broken) + return ARM_SMMU_CBNDX_BYPASS; + + /* + * The identity domain to emulate bypass is the only domain without a + * dev, use the last context bank for this to avoid collisions with + * active contexts during initialization. + */ + if (!dev) + start = smmu->num_context_banks - 1; + + return __arm_smmu_alloc_bitmap(smmu->context_map, start, smmu->num_context_banks); +} + +static int qcom_smmu_cfg_probe(struct arm_smmu_device *smmu) +{ + unsigned int last_s2cr = ARM_SMMU_GR0_S2CR(smmu->num_mapping_groups - 1); + struct qcom_smmu *qsmmu = to_qcom_smmu(smmu); + u32 reg; + + /* + * With some firmware writes to S2CR of type FAULT are ignored, and + * writing BYPASS will end up as FAULT in the register. Perform a write + * to S2CR to detect if this is the case with the current firmware. + */ + reg = FIELD_PREP(ARM_SMMU_S2CR_TYPE, S2CR_TYPE_BYPASS) | + FIELD_PREP(ARM_SMMU_S2CR_CBNDX, 0xff) | + FIELD_PREP(ARM_SMMU_S2CR_PRIVCFG, S2CR_PRIVCFG_DEFAULT); + arm_smmu_gr0_write(smmu, last_s2cr, reg); + reg = arm_smmu_gr0_read(smmu, last_s2cr); + if (FIELD_GET(ARM_SMMU_S2CR_TYPE, reg) != S2CR_TYPE_BYPASS) + qsmmu->bypass_broken = true; + + return 0; +} + static int qcom_smmu_def_domain_type(struct device *dev) { const struct of_device_id *match = @@ -200,6 +250,8 @@ static int qcom_smmu500_reset(struct arm_smmu_device *smmu) } static const struct arm_smmu_impl qcom_smmu_impl = { + .alloc_context_bank = qcom_smmu_alloc_context_bank, + .cfg_probe = qcom_smmu_cfg_probe, .def_domain_type = qcom_smmu_def_domain_type, .reset = qcom_smmu500_reset, };
Some firmware found on various Qualcomm platforms traps writes to S2CR of type BYPASS and writes FAULT into the register. In particular, this prevents us from marking the streams for the display controller as BYPASS to allow continued scanout of the screen through the initialization of the ARM SMMU. This adds a Qualcomm specific cfg_probe function, which probes for the broken behavior of the S2CR registers and implements a custom alloc_context_bank() that when necessary allocates a context bank (without translation) for these domains as well. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- Changes since v2: - Move quirk from arm_smmudevice to qcom_smmu, as we localize the quirk handling to the Qualcomm specific implemntation. drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 52 ++++++++++++++++++++++ 1 file changed, 52 insertions(+)