| Message ID | 20200910162009.613976-1-jacopo+renesas@jmondi.org (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Kieran Bingham |
| Headers | show |
| Series | [v5] dt-bindings: media: imx274: Convert to json-schema | expand |
Hi Jacopo, On 10/09/20 18:20, Jacopo Mondi wrote: > Convert the imx274 bindings document to json-schema and update > the MAINTAINERS file accordingly. > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > --- > > v4->v5: > - Add optional properties that were upstreamed in v5.9-rc2 in the textual > bindings > - Move them to be lowercase: this patch should be fast-tracked through the > fixes branch to make sure it gets in before v5.9 is released, otherwise the > textual bindings will have supplies names in uppercase > > --- > .../devicetree/bindings/media/i2c/imx274.txt | 38 --------- > .../bindings/media/i2c/sony,imx274.yaml | 77 +++++++++++++++++++ > MAINTAINERS | 2 +- > 3 files changed, 78 insertions(+), 39 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/media/i2c/imx274.txt > create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml > > diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt > deleted file mode 100644 > index 0727079d2410..000000000000 > --- a/Documentation/devicetree/bindings/media/i2c/imx274.txt > +++ /dev/null > @@ -1,38 +0,0 @@ > -* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor > - > -The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with > -an active array size of 3864H x 2202V. It is programmable through I2C > -interface. The I2C address is fixed to 0x1a as per sensor data sheet. > -Image data is sent through MIPI CSI-2, which is configured as 4 lanes > -at 1440 Mbps. > - > - > -Required Properties: > -- compatible: value should be "sony,imx274" for imx274 sensor > -- reg: I2C bus address of the device > - > -Optional Properties: > -- reset-gpios: Sensor reset GPIO > -- clocks: Reference to the input clock. > -- clock-names: Should be "inck". > -- VANA-supply: Sensor 2.8v analog supply. > -- VDIG-supply: Sensor 1.8v digital core supply. > -- VDDL-supply: Sensor digital IO 1.2v supply. > - > -The imx274 device node should contain one 'port' child node with > -an 'endpoint' subnode. For further reading on port node refer to > -Documentation/devicetree/bindings/media/video-interfaces.txt. > - > -Example: > - sensor@1a { > - compatible = "sony,imx274"; > - reg = <0x1a>; > - #address-cells = <1>; > - #size-cells = <0>; > - reset-gpios = <&gpio_sensor 0 0>; > - port { > - sensor_out: endpoint { > - remote-endpoint = <&csiss_in>; > - }; > - }; > - }; > diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml > new file mode 100644 > index 000000000000..fe81def68466 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml > @@ -0,0 +1,77 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/i2c/sony,imx274.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Sony 1/2.5-Inch 8.51MP CMOS Digital Image Sensor > + > +maintainers: > + - Leon Luo <leonl@leopardimaging.com> > + > +description: | > + The Sony IMX274 is a 1/2.5-inch CMOS active pixel digital image sensor with an > + active array size of 3864H x 2202V. It is programmable through I2C interface. > + Image data is sent through MIPI CSI-2, which is configured as 4 lanes at 1440 > + Mbps. > + > +properties: > + compatible: > + const: sony,imx274 > + > + reg: > + const: 0x1a > + > + reset-gpios: > + maxItems: 1 > + > + port: > + type: object > + description: | > + Output video port. See ../video-interfaces.txt. > + > + clocks: > + maxItems: 1 > + > + clock-names: > + const: inck > + > + vana-supply: > + description: Sensor 2.8v analog supply. > + maxItems: 1 > + > + vdig-supply: > + description: Sensor 2.8v analog supply. Copy-paste leftover. Should be "Sensor 1.8v digital core supply." > + maxItems: 1 > + > + vddl-supply: > + description: Sensor 2.8v analog supply. Same here, should be "Sensor digital IO 1.2v supply." With the above fixed you can add to v6: Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Hi Luca, On Fri, Sep 11, 2020 at 09:53:23AM +0200, Luca Ceresoli wrote: > Hi Jacopo, > > On 10/09/20 18:20, Jacopo Mondi wrote: > > Convert the imx274 bindings document to json-schema and update > > the MAINTAINERS file accordingly. > > > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > > --- > > > > v4->v5: > > - Add optional properties that were upstreamed in v5.9-rc2 in the textual > > bindings > > - Move them to be lowercase: this patch should be fast-tracked through the > > fixes branch to make sure it gets in before v5.9 is released, otherwise the > > textual bindings will have supplies names in uppercase > > > > --- > > .../devicetree/bindings/media/i2c/imx274.txt | 38 --------- > > .../bindings/media/i2c/sony,imx274.yaml | 77 +++++++++++++++++++ > > MAINTAINERS | 2 +- > > 3 files changed, 78 insertions(+), 39 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/media/i2c/imx274.txt > > create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml > > > > diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt > > deleted file mode 100644 > > index 0727079d2410..000000000000 > > --- a/Documentation/devicetree/bindings/media/i2c/imx274.txt > > +++ /dev/null > > @@ -1,38 +0,0 @@ > > -* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor > > - > > -The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with > > -an active array size of 3864H x 2202V. It is programmable through I2C > > -interface. The I2C address is fixed to 0x1a as per sensor data sheet. > > -Image data is sent through MIPI CSI-2, which is configured as 4 lanes > > -at 1440 Mbps. > > - > > - > > -Required Properties: > > -- compatible: value should be "sony,imx274" for imx274 sensor > > -- reg: I2C bus address of the device > > - > > -Optional Properties: > > -- reset-gpios: Sensor reset GPIO > > -- clocks: Reference to the input clock. > > -- clock-names: Should be "inck". > > -- VANA-supply: Sensor 2.8v analog supply. > > -- VDIG-supply: Sensor 1.8v digital core supply. > > -- VDDL-supply: Sensor digital IO 1.2v supply. > > - > > -The imx274 device node should contain one 'port' child node with > > -an 'endpoint' subnode. For further reading on port node refer to > > -Documentation/devicetree/bindings/media/video-interfaces.txt. > > - > > -Example: > > - sensor@1a { > > - compatible = "sony,imx274"; > > - reg = <0x1a>; > > - #address-cells = <1>; > > - #size-cells = <0>; > > - reset-gpios = <&gpio_sensor 0 0>; > > - port { > > - sensor_out: endpoint { > > - remote-endpoint = <&csiss_in>; > > - }; > > - }; > > - }; > > diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml > > new file mode 100644 > > index 000000000000..fe81def68466 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml > > @@ -0,0 +1,77 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/media/i2c/sony,imx274.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Sony 1/2.5-Inch 8.51MP CMOS Digital Image Sensor > > + > > +maintainers: > > + - Leon Luo <leonl@leopardimaging.com> > > + > > +description: | > > + The Sony IMX274 is a 1/2.5-inch CMOS active pixel digital image sensor with an > > + active array size of 3864H x 2202V. It is programmable through I2C interface. > > + Image data is sent through MIPI CSI-2, which is configured as 4 lanes at 1440 > > + Mbps. > > + > > +properties: > > + compatible: > > + const: sony,imx274 > > + > > + reg: > > + const: 0x1a > > + > > + reset-gpios: > > + maxItems: 1 > > + > > + port: > > + type: object > > + description: | > > + Output video port. See ../video-interfaces.txt. > > + > > + clocks: > > + maxItems: 1 > > + > > + clock-names: > > + const: inck > > + > > + vana-supply: > > + description: Sensor 2.8v analog supply. > > + maxItems: 1 > > + > > + vdig-supply: > > + description: Sensor 2.8v analog supply. > > Copy-paste leftover. Should be "Sensor 1.8v digital core supply." > oooo :( I've been so sloppy on this series I'm almost ashamed. I'll send a v6 with your tag in > > + maxItems: 1 > > + > > + vddl-supply: > > + description: Sensor 2.8v analog supply. > > Same here, should be "Sensor digital IO 1.2v supply." > > With the above fixed you can add to v6: > Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> > > -- > Luca
Hi Jacopo, On Fri, Sep 11, 2020 at 10:59:39AM +0200, Jacopo Mondi wrote: > On Fri, Sep 11, 2020 at 09:53:23AM +0200, Luca Ceresoli wrote: > > On 10/09/20 18:20, Jacopo Mondi wrote: > > > Convert the imx274 bindings document to json-schema and update > > > the MAINTAINERS file accordingly. > > > > > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > > > --- > > > > > > v4->v5: > > > - Add optional properties that were upstreamed in v5.9-rc2 in the textual > > > bindings > > > - Move them to be lowercase: this patch should be fast-tracked through the > > > fixes branch to make sure it gets in before v5.9 is released, otherwise the > > > textual bindings will have supplies names in uppercase > > > > > > --- > > > .../devicetree/bindings/media/i2c/imx274.txt | 38 --------- > > > .../bindings/media/i2c/sony,imx274.yaml | 77 +++++++++++++++++++ > > > MAINTAINERS | 2 +- > > > 3 files changed, 78 insertions(+), 39 deletions(-) > > > delete mode 100644 Documentation/devicetree/bindings/media/i2c/imx274.txt > > > create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt > > > deleted file mode 100644 > > > index 0727079d2410..000000000000 > > > --- a/Documentation/devicetree/bindings/media/i2c/imx274.txt > > > +++ /dev/null > > > @@ -1,38 +0,0 @@ > > > -* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor > > > - > > > -The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with > > > -an active array size of 3864H x 2202V. It is programmable through I2C > > > -interface. The I2C address is fixed to 0x1a as per sensor data sheet. > > > -Image data is sent through MIPI CSI-2, which is configured as 4 lanes > > > -at 1440 Mbps. > > > - > > > - > > > -Required Properties: > > > -- compatible: value should be "sony,imx274" for imx274 sensor > > > -- reg: I2C bus address of the device > > > - > > > -Optional Properties: > > > -- reset-gpios: Sensor reset GPIO > > > -- clocks: Reference to the input clock. > > > -- clock-names: Should be "inck". > > > -- VANA-supply: Sensor 2.8v analog supply. > > > -- VDIG-supply: Sensor 1.8v digital core supply. > > > -- VDDL-supply: Sensor digital IO 1.2v supply. > > > - > > > -The imx274 device node should contain one 'port' child node with > > > -an 'endpoint' subnode. For further reading on port node refer to > > > -Documentation/devicetree/bindings/media/video-interfaces.txt. > > > - > > > -Example: > > > - sensor@1a { > > > - compatible = "sony,imx274"; > > > - reg = <0x1a>; > > > - #address-cells = <1>; > > > - #size-cells = <0>; > > > - reset-gpios = <&gpio_sensor 0 0>; > > > - port { > > > - sensor_out: endpoint { > > > - remote-endpoint = <&csiss_in>; > > > - }; > > > - }; > > > - }; > > > diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml > > > new file mode 100644 > > > index 000000000000..fe81def68466 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml > > > @@ -0,0 +1,77 @@ > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/media/i2c/sony,imx274.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Sony 1/2.5-Inch 8.51MP CMOS Digital Image Sensor > > > + > > > +maintainers: > > > + - Leon Luo <leonl@leopardimaging.com> > > > + > > > +description: | > > > + The Sony IMX274 is a 1/2.5-inch CMOS active pixel digital image sensor with an > > > + active array size of 3864H x 2202V. It is programmable through I2C interface. > > > + Image data is sent through MIPI CSI-2, which is configured as 4 lanes at 1440 > > > + Mbps. > > > + > > > +properties: > > > + compatible: > > > + const: sony,imx274 > > > + > > > + reg: > > > + const: 0x1a > > > + > > > + reset-gpios: > > > + maxItems: 1 > > > + > > > + port: > > > + type: object > > > + description: | > > > + Output video port. See ../video-interfaces.txt. > > > + > > > + clocks: > > > + maxItems: 1 > > > + > > > + clock-names: > > > + const: inck > > > + > > > + vana-supply: > > > + description: Sensor 2.8v analog supply. > > > + maxItems: 1 > > > + > > > + vdig-supply: > > > + description: Sensor 2.8v analog supply. > > > > Copy-paste leftover. Should be "Sensor 1.8v digital core supply." > > oooo :( > I've been so sloppy on this series I'm almost ashamed. > > I'll send a v6 with your tag in And if you haven't already, s/v/V/ (the voltage symbol is an uppercase V). > > > + maxItems: 1 > > > + > > > + vddl-supply: > > > + description: Sensor 2.8v analog supply. > > > > Same here, should be "Sensor digital IO 1.2v supply." > > > > With the above fixed you can add to v6: > > Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
On Fri, Sep 11, 2020 at 08:35:50PM +0300, Laurent Pinchart wrote: > Hi Jacopo, > > On Fri, Sep 11, 2020 at 10:59:39AM +0200, Jacopo Mondi wrote: > > On Fri, Sep 11, 2020 at 09:53:23AM +0200, Luca Ceresoli wrote: > > > On 10/09/20 18:20, Jacopo Mondi wrote: > > > > Convert the imx274 bindings document to json-schema and update > > > > the MAINTAINERS file accordingly. > > > > > > > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > > > > --- > > > > > > > > v4->v5: > > > > - Add optional properties that were upstreamed in v5.9-rc2 in the textual > > > > bindings > > > > - Move them to be lowercase: this patch should be fast-tracked through the > > > > fixes branch to make sure it gets in before v5.9 is released, otherwise the > > > > textual bindings will have supplies names in uppercase > > > > > > > > --- > > > > .../devicetree/bindings/media/i2c/imx274.txt | 38 --------- > > > > .../bindings/media/i2c/sony,imx274.yaml | 77 +++++++++++++++++++ > > > > MAINTAINERS | 2 +- > > > > 3 files changed, 78 insertions(+), 39 deletions(-) > > > > delete mode 100644 Documentation/devicetree/bindings/media/i2c/imx274.txt > > > > create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml > > > > > > > > diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt > > > > deleted file mode 100644 > > > > index 0727079d2410..000000000000 > > > > --- a/Documentation/devicetree/bindings/media/i2c/imx274.txt > > > > +++ /dev/null > > > > @@ -1,38 +0,0 @@ > > > > -* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor > > > > - > > > > -The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with > > > > -an active array size of 3864H x 2202V. It is programmable through I2C > > > > -interface. The I2C address is fixed to 0x1a as per sensor data sheet. > > > > -Image data is sent through MIPI CSI-2, which is configured as 4 lanes > > > > -at 1440 Mbps. > > > > - > > > > - > > > > -Required Properties: > > > > -- compatible: value should be "sony,imx274" for imx274 sensor > > > > -- reg: I2C bus address of the device > > > > - > > > > -Optional Properties: > > > > -- reset-gpios: Sensor reset GPIO > > > > -- clocks: Reference to the input clock. > > > > -- clock-names: Should be "inck". > > > > -- VANA-supply: Sensor 2.8v analog supply. > > > > -- VDIG-supply: Sensor 1.8v digital core supply. > > > > -- VDDL-supply: Sensor digital IO 1.2v supply. > > > > - > > > > -The imx274 device node should contain one 'port' child node with > > > > -an 'endpoint' subnode. For further reading on port node refer to > > > > -Documentation/devicetree/bindings/media/video-interfaces.txt. > > > > - > > > > -Example: > > > > - sensor@1a { > > > > - compatible = "sony,imx274"; > > > > - reg = <0x1a>; > > > > - #address-cells = <1>; > > > > - #size-cells = <0>; > > > > - reset-gpios = <&gpio_sensor 0 0>; > > > > - port { > > > > - sensor_out: endpoint { > > > > - remote-endpoint = <&csiss_in>; > > > > - }; > > > > - }; > > > > - }; > > > > diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml > > > > new file mode 100644 > > > > index 000000000000..fe81def68466 > > > > --- /dev/null > > > > +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml > > > > @@ -0,0 +1,77 @@ > > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > > +%YAML 1.2 > > > > +--- > > > > +$id: http://devicetree.org/schemas/media/i2c/sony,imx274.yaml# > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > > + > > > > +title: Sony 1/2.5-Inch 8.51MP CMOS Digital Image Sensor > > > > + > > > > +maintainers: > > > > + - Leon Luo <leonl@leopardimaging.com> > > > > + > > > > +description: | > > > > + The Sony IMX274 is a 1/2.5-inch CMOS active pixel digital image sensor with an > > > > + active array size of 3864H x 2202V. It is programmable through I2C interface. > > > > + Image data is sent through MIPI CSI-2, which is configured as 4 lanes at 1440 > > > > + Mbps. > > > > + > > > > +properties: > > > > + compatible: > > > > + const: sony,imx274 > > > > + > > > > + reg: > > > > + const: 0x1a > > > > + > > > > + reset-gpios: > > > > + maxItems: 1 > > > > + > > > > + port: > > > > + type: object > > > > + description: | > > > > + Output video port. See ../video-interfaces.txt. > > > > + > > > > + clocks: > > > > + maxItems: 1 > > > > + > > > > + clock-names: > > > > + const: inck > > > > + > > > > + vana-supply: > > > > + description: Sensor 2.8v analog supply. > > > > + maxItems: 1 > > > > + > > > > + vdig-supply: > > > > + description: Sensor 2.8v analog supply. > > > > > > Copy-paste leftover. Should be "Sensor 1.8v digital core supply." > > > > oooo :( > > I've been so sloppy on this series I'm almost ashamed. > > > > I'll send a v6 with your tag in > > And if you haven't already, s/v/V/ (the voltage symbol is an uppercase > V). Also a whitespace character before that "V" would be nice. :)
diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt deleted file mode 100644 index 0727079d2410..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/imx274.txt +++ /dev/null @@ -1,38 +0,0 @@ -* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor - -The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with -an active array size of 3864H x 2202V. It is programmable through I2C -interface. The I2C address is fixed to 0x1a as per sensor data sheet. -Image data is sent through MIPI CSI-2, which is configured as 4 lanes -at 1440 Mbps. - - -Required Properties: -- compatible: value should be "sony,imx274" for imx274 sensor -- reg: I2C bus address of the device - -Optional Properties: -- reset-gpios: Sensor reset GPIO -- clocks: Reference to the input clock. -- clock-names: Should be "inck". -- VANA-supply: Sensor 2.8v analog supply. -- VDIG-supply: Sensor 1.8v digital core supply. -- VDDL-supply: Sensor digital IO 1.2v supply. - -The imx274 device node should contain one 'port' child node with -an 'endpoint' subnode. For further reading on port node refer to -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Example: - sensor@1a { - compatible = "sony,imx274"; - reg = <0x1a>; - #address-cells = <1>; - #size-cells = <0>; - reset-gpios = <&gpio_sensor 0 0>; - port { - sensor_out: endpoint { - remote-endpoint = <&csiss_in>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml new file mode 100644 index 000000000000..fe81def68466 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx274.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony 1/2.5-Inch 8.51MP CMOS Digital Image Sensor + +maintainers: + - Leon Luo <leonl@leopardimaging.com> + +description: | + The Sony IMX274 is a 1/2.5-inch CMOS active pixel digital image sensor with an + active array size of 3864H x 2202V. It is programmable through I2C interface. + Image data is sent through MIPI CSI-2, which is configured as 4 lanes at 1440 + Mbps. + +properties: + compatible: + const: sony,imx274 + + reg: + const: 0x1a + + reset-gpios: + maxItems: 1 + + port: + type: object + description: | + Output video port. See ../video-interfaces.txt. + + clocks: + maxItems: 1 + + clock-names: + const: inck + + vana-supply: + description: Sensor 2.8v analog supply. + maxItems: 1 + + vdig-supply: + description: Sensor 2.8v analog supply. + maxItems: 1 + + vddl-supply: + description: Sensor 2.8v analog supply. + maxItems: 1 + +required: + - compatible + - reg + - port + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + imx274: camera-sensor@1a { + compatible = "sony,imx274"; + reg = <0x1a>; + reset-gpios = <&gpio_sensor 0 0>; + + port { + sensor_out: endpoint { + remote-endpoint = <&csiss_in>; + }; + }; + }; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index 355f9c04b56b..2c9393a7e1ba 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16150,7 +16150,7 @@ M: Leon Luo <leonl@leopardimaging.com> L: linux-media@vger.kernel.org S: Maintained T: git git://linuxtv.org/media_tree.git -F: Documentation/devicetree/bindings/media/i2c/imx274.txt +F: Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml F: drivers/media/i2c/imx274.c SONY IMX290 SENSOR DRIVER