| Message ID | 20200904145312.10960-7-krzk@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | iMX 8 - Another round of cleanups | expand |
On Fri, Sep 04, 2020 at 04:53:05PM +0200, Krzysztof Kozlowski wrote: > Add common properties appearing in DTSes (clock-names, > clock-output-names) to fix dtbs_check warnings like: > > arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dt.yaml: > pmic@4b: 'clock-names', 'clock-output-names', do not match any of the regexes: 'pinctrl-[0-9]+' > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > --- > .../devicetree/bindings/mfd/rohm,bd71837-pmic.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml > index 65018a019e1d..ecce0d5e3a95 100644 > --- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml > +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml > @@ -32,9 +32,15 @@ properties: > clocks: > maxItems: 1 > > + clock-names: > + maxItems: 1 Needs to define what the name is. > + > "#clock-cells": > const: 0 > > + clock-output-names: > + maxItems: 1 Ideally this one too, but we've been more flexible on it. > + > # The BD718x7 supports two different HW states as reset target states. States > # are called as SNVS and READY. At READY state all the PMIC power outputs go > # down and OTP is reload. At the SNVS state all other logic and external > -- > 2.17.1 >
Hello All, On Mon, 2020-09-14 at 16:44 -0600, Rob Herring wrote: > On Fri, Sep 04, 2020 at 04:53:05PM +0200, Krzysztof Kozlowski wrote: > > Add common properties appearing in DTSes (clock-names, > > clock-output-names) to fix dtbs_check warnings like: > > > > arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dt.yaml: > > pmic@4b: 'clock-names', 'clock-output-names', do not match any > > of the regexes: 'pinctrl-[0-9]+' > > > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > > --- > > .../devicetree/bindings/mfd/rohm,bd71837-pmic.yaml | 6 > > ++++++ > > 1 file changed, 6 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837- > > pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71837- > > pmic.yaml > > index 65018a019e1d..ecce0d5e3a95 100644 > > --- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml > > +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml > > @@ -32,9 +32,15 @@ properties: > > clocks: > > maxItems: 1 > > > > + clock-names: > > + maxItems: 1 > > Needs to define what the name is. Someone once told me that "naming is hard". Do we have some good common convention for 32K oscillator input naming? Or should it just be dropped? > > > + > > "#clock-cells": > > const: 0 > > > > + clock-output-names: > > + maxItems: 1 > > Ideally this one too, but we've been more flexible on it. Data-sheet for BD71837 uses pin name "C32k_OUT". So maybe this would be good? BD71838 uses "bd71828-32k-out" . so we could also go with this same convention and use "bd71837-32k-out". Or - we could take a risk and *assume* typical use case for this clk (as this is typically used with i.MX8 I'd guess the 32k is used for RTC) and name it accordingly. Br, Matti Vaittinen -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ Simon says - in Latin please. "non cogito me" dixit Rene Descarte, deinde evanescavit (Thanks for the translation Simon)
On Tue, Sep 15, 2020 at 12:34 AM Vaittinen, Matti <Matti.Vaittinen@fi.rohmeurope.com> wrote: > > > Hello All, > > On Mon, 2020-09-14 at 16:44 -0600, Rob Herring wrote: > > On Fri, Sep 04, 2020 at 04:53:05PM +0200, Krzysztof Kozlowski wrote: > > > Add common properties appearing in DTSes (clock-names, > > > clock-output-names) to fix dtbs_check warnings like: > > > > > > arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dt.yaml: > > > pmic@4b: 'clock-names', 'clock-output-names', do not match any > > > of the regexes: 'pinctrl-[0-9]+' > > > > > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > > > --- > > > .../devicetree/bindings/mfd/rohm,bd71837-pmic.yaml | 6 > > > ++++++ > > > 1 file changed, 6 insertions(+) > > > > > > diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837- > > > pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71837- > > > pmic.yaml > > > index 65018a019e1d..ecce0d5e3a95 100644 > > > --- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml > > > +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml > > > @@ -32,9 +32,15 @@ properties: > > > clocks: > > > maxItems: 1 > > > > > > + clock-names: > > > + maxItems: 1 > > > > Needs to define what the name is. > > Someone once told me that "naming is hard". > Do we have some good common convention for 32K oscillator input naming? No. > Or should it just be dropped? Yes, having a name for a single entry in *-names is kind of pointless IMO. > > > + > > > "#clock-cells": > > > const: 0 > > > > > > + clock-output-names: > > > + maxItems: 1 > > > > Ideally this one too, but we've been more flexible on it. > > Data-sheet for BD71837 uses pin name "C32k_OUT". So maybe this would be > good? What's in all the dts files? I'd go with that if there's any clear winner. If it's already a random free-for-all, then just leave it as-is. > > BD71838 uses "bd71828-32k-out" . so we could also go with this same > convention and use "bd71837-32k-out". Or - we could take a risk and > *assume* typical use case for this clk (as this is typically used with > i.MX8 I'd guess the 32k is used for RTC) and name it accordingly. It should be aligned with what the output is called, not what it is connected to. Rob
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml index 65018a019e1d..ecce0d5e3a95 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml @@ -32,9 +32,15 @@ properties: clocks: maxItems: 1 + clock-names: + maxItems: 1 + "#clock-cells": const: 0 + clock-output-names: + maxItems: 1 + # The BD718x7 supports two different HW states as reset target states. States # are called as SNVS and READY. At READY state all the PMIC power outputs go # down and OTP is reload. At the SNVS state all other logic and external
Add common properties appearing in DTSes (clock-names, clock-output-names) to fix dtbs_check warnings like: arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dt.yaml: pmic@4b: 'clock-names', 'clock-output-names', do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- .../devicetree/bindings/mfd/rohm,bd71837-pmic.yaml | 6 ++++++ 1 file changed, 6 insertions(+)