| Message ID | 1600237327-33618-1-git-send-email-zhengchuan@huawei.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | *** A Method for evaluating dirty page rate *** | expand |
* Chuan Zheng (zhengchuan@huawei.com) wrote: > v9 -> v10: > rename find_page_matched as find_block_matched > fix wrong termination condition in find_block_matched > add review-by for patches > > v8 -> v9: > fix wrong index return of record_ramblock_hash_info > optimize variable name according to review > reset dirty_rate as -1 > change returns of compare_page_hash_info to bool > > v7 -> v8: > add atomic_read for dirtyrate status > add error_report if set dirtyrate state failed > change returns of save_ramblock_hash and record_ramblock_hash_info to bool > alloc ramblock dirtyinfo array at one time > add review-by for patches > > v6 -> v7: > fix minior comments and coding style by review > add review-by for patches > > v5 -> v6: > fix coding style according to review > use TARGET_PAGE_SIZE and TARGET_PAGE_BITS instead of self-defined macros > return start-time and calc-time by qmp command > > v4 -> v5: > fix git apply failed due to meson-build > add review-by for patches in v3 > > v3 -> v4: > use crc32 to get hash result instead of md5 > add DirtyRateStatus to denote calculation status > add some trace_calls to make it easier to debug > fix some comments accroding to review > > v2 -> v3: > fix size_t compile warning > fix codestyle checked by checkpatch.pl > > v1 -> v2: > use g_rand_new() to generate rand_buf > move RAMBLOCK_FOREACH_MIGRATABLE into migration/ram.h > add skip_sample_ramblock to filter sampled ramblock > fix multi-numa vm coredump when query dirtyrate > rename qapi interface and rename some structures and functions > succeed to compile by appling each patch > add test for migrating vm > > Sometimes it is neccessary to evaluate dirty page rate before migration. > Users could decide whether to proceed migration based on the evaluation > in case of vm performance loss due to heavy workload. > Unlikey simulating dirtylog sync which could do harm on runnning vm, > we provide a sample-hash method to compare hash results for samping page. > In this way, it would have hardly no impact on vm performance. > > Evaluate the dirtypage rate both on running and migration vm. > The VM specifications for migration are as follows: > - VM use 4-K page; > - the number of VCPU is 32; > - the total memory is 32Gigabit; > - use 'mempress' tool to pressurize VM(mempress 4096 1024); > - migration bandwidth is 1GB/s > > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > | | running | migrating | > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > | no mempress | 4MB/s | 8MB/s (migrated success) | > ------------------------------------------------------------------------------------------- > | mempress 4096 1024 | 1060MB/s | 456MB/s ~ 1142MB/s (cpu throttle triggered) | > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > | mempress 4096 4096 | 4114MB/s | 688MB/s ~ 4132MB/s (cpu throttle triggered) | > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > Test dirtyrate by qmp command like this: > 1. virsh qemu-monitor-command [vmname] '{"execute":"calc-dirty-rate", "arguments": {"calc-time": [sleep-time]}}'; > 2. sleep specific time which is a bit larger than sleep-time > 3. virsh qemu-monitor-command [vmname] '{"execute":"query-dirty-rate"}' Thanks; it looks like we have a full set of reviews; I'll try and add this for the next migration pull. > The qmp command returns like this: > {"return":{"status":"measured","dirty-rate":374,"start-time":3718293,"calc-time":1},"id":"libvirt-15"} > > Further test dirtyrate by libvirt api like this: > virsh getdirtyrate [vmname] [sleep-time] So do you have some libvirt patches you're going to post? Dave > Chuan Zheng (12): > migration/dirtyrate: setup up query-dirtyrate framwork > migration/dirtyrate: add DirtyRateStatus to denote calculation status > migration/dirtyrate: Add RamblockDirtyInfo to store sampled page info > migration/dirtyrate: Add dirtyrate statistics series functions > migration/dirtyrate: move RAMBLOCK_FOREACH_MIGRATABLE into ram.h > migration/dirtyrate: Record hash results for each sampled page > migration/dirtyrate: Compare page hash results for recorded sampled > page > migration/dirtyrate: skip sampling ramblock with size below > MIN_RAMBLOCK_SIZE > migration/dirtyrate: Implement set_sample_page_period() and > is_sample_period_valid() > migration/dirtyrate: Implement calculate_dirtyrate() function > migration/dirtyrate: Implement > qmp_cal_dirty_rate()/qmp_get_dirty_rate() function > migration/dirtyrate: Add trace_calls to make it easier to debug > > migration/dirtyrate.c | 426 +++++++++++++++++++++++++++++++++++++++++++++++++ > migration/dirtyrate.h | 70 ++++++++ > migration/meson.build | 2 +- > migration/ram.c | 11 +- > migration/ram.h | 10 ++ > migration/trace-events | 8 + > qapi/migration.json | 67 ++++++++ > 7 files changed, 583 insertions(+), 11 deletions(-) > create mode 100644 migration/dirtyrate.c > create mode 100644 migration/dirtyrate.h > > -- > 1.8.3.1 >
On 2020/9/17 17:15, Dr. David Alan Gilbert wrote: > * Chuan Zheng (zhengchuan@huawei.com) wrote: >> v9 -> v10: >> rename find_page_matched as find_block_matched >> fix wrong termination condition in find_block_matched >> add review-by for patches >> >> v8 -> v9: >> fix wrong index return of record_ramblock_hash_info >> optimize variable name according to review >> reset dirty_rate as -1 >> change returns of compare_page_hash_info to bool >> >> v7 -> v8: >> add atomic_read for dirtyrate status >> add error_report if set dirtyrate state failed >> change returns of save_ramblock_hash and record_ramblock_hash_info to bool >> alloc ramblock dirtyinfo array at one time >> add review-by for patches >> >> v6 -> v7: >> fix minior comments and coding style by review >> add review-by for patches >> >> v5 -> v6: >> fix coding style according to review >> use TARGET_PAGE_SIZE and TARGET_PAGE_BITS instead of self-defined macros >> return start-time and calc-time by qmp command >> >> v4 -> v5: >> fix git apply failed due to meson-build >> add review-by for patches in v3 >> >> v3 -> v4: >> use crc32 to get hash result instead of md5 >> add DirtyRateStatus to denote calculation status >> add some trace_calls to make it easier to debug >> fix some comments accroding to review >> >> v2 -> v3: >> fix size_t compile warning >> fix codestyle checked by checkpatch.pl >> >> v1 -> v2: >> use g_rand_new() to generate rand_buf >> move RAMBLOCK_FOREACH_MIGRATABLE into migration/ram.h >> add skip_sample_ramblock to filter sampled ramblock >> fix multi-numa vm coredump when query dirtyrate >> rename qapi interface and rename some structures and functions >> succeed to compile by appling each patch >> add test for migrating vm >> >> Sometimes it is neccessary to evaluate dirty page rate before migration. >> Users could decide whether to proceed migration based on the evaluation >> in case of vm performance loss due to heavy workload. >> Unlikey simulating dirtylog sync which could do harm on runnning vm, >> we provide a sample-hash method to compare hash results for samping page. >> In this way, it would have hardly no impact on vm performance. >> >> Evaluate the dirtypage rate both on running and migration vm. >> The VM specifications for migration are as follows: >> - VM use 4-K page; >> - the number of VCPU is 32; >> - the total memory is 32Gigabit; >> - use 'mempress' tool to pressurize VM(mempress 4096 1024); >> - migration bandwidth is 1GB/s >> >> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >> | | running | migrating | >> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >> | no mempress | 4MB/s | 8MB/s (migrated success) | >> ------------------------------------------------------------------------------------------- >> | mempress 4096 1024 | 1060MB/s | 456MB/s ~ 1142MB/s (cpu throttle triggered) | >> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >> | mempress 4096 4096 | 4114MB/s | 688MB/s ~ 4132MB/s (cpu throttle triggered) | >> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >> >> Test dirtyrate by qmp command like this: >> 1. virsh qemu-monitor-command [vmname] '{"execute":"calc-dirty-rate", "arguments": {"calc-time": [sleep-time]}}'; >> 2. sleep specific time which is a bit larger than sleep-time >> 3. virsh qemu-monitor-command [vmname] '{"execute":"query-dirty-rate"}' > > Thanks; it looks like we have a full set of reviews; I'll try and add > this for the next migration pull. > >> The qmp command returns like this: >> {"return":{"status":"measured","dirty-rate":374,"start-time":3718293,"calc-time":1},"id":"libvirt-15"} >> >> Further test dirtyrate by libvirt api like this: >> virsh getdirtyrate [vmname] [sleep-time] > > So do you have some libvirt patches you're going to post? > > Dave > Hi, Dave. Yes, libvirt(including libvirt-python) interface will come after this qemu series patch:) >> Chuan Zheng (12): >> migration/dirtyrate: setup up query-dirtyrate framwork >> migration/dirtyrate: add DirtyRateStatus to denote calculation status >> migration/dirtyrate: Add RamblockDirtyInfo to store sampled page info >> migration/dirtyrate: Add dirtyrate statistics series functions >> migration/dirtyrate: move RAMBLOCK_FOREACH_MIGRATABLE into ram.h >> migration/dirtyrate: Record hash results for each sampled page >> migration/dirtyrate: Compare page hash results for recorded sampled >> page >> migration/dirtyrate: skip sampling ramblock with size below >> MIN_RAMBLOCK_SIZE >> migration/dirtyrate: Implement set_sample_page_period() and >> is_sample_period_valid() >> migration/dirtyrate: Implement calculate_dirtyrate() function >> migration/dirtyrate: Implement >> qmp_cal_dirty_rate()/qmp_get_dirty_rate() function >> migration/dirtyrate: Add trace_calls to make it easier to debug >> >> migration/dirtyrate.c | 426 +++++++++++++++++++++++++++++++++++++++++++++++++ >> migration/dirtyrate.h | 70 ++++++++ >> migration/meson.build | 2 +- >> migration/ram.c | 11 +- >> migration/ram.h | 10 ++ >> migration/trace-events | 8 + >> qapi/migration.json | 67 ++++++++ >> 7 files changed, 583 insertions(+), 11 deletions(-) >> create mode 100644 migration/dirtyrate.c >> create mode 100644 migration/dirtyrate.h >> >> -- >> 1.8.3.1 >>
* Zheng Chuan (zhengchuan@huawei.com) wrote: > > > On 2020/9/17 17:15, Dr. David Alan Gilbert wrote: > > * Chuan Zheng (zhengchuan@huawei.com) wrote: > >> v9 -> v10: > >> rename find_page_matched as find_block_matched > >> fix wrong termination condition in find_block_matched > >> add review-by for patches > >> > >> v8 -> v9: > >> fix wrong index return of record_ramblock_hash_info > >> optimize variable name according to review > >> reset dirty_rate as -1 > >> change returns of compare_page_hash_info to bool > >> > >> v7 -> v8: > >> add atomic_read for dirtyrate status > >> add error_report if set dirtyrate state failed > >> change returns of save_ramblock_hash and record_ramblock_hash_info to bool > >> alloc ramblock dirtyinfo array at one time > >> add review-by for patches > >> > >> v6 -> v7: > >> fix minior comments and coding style by review > >> add review-by for patches > >> > >> v5 -> v6: > >> fix coding style according to review > >> use TARGET_PAGE_SIZE and TARGET_PAGE_BITS instead of self-defined macros > >> return start-time and calc-time by qmp command > >> > >> v4 -> v5: > >> fix git apply failed due to meson-build > >> add review-by for patches in v3 > >> > >> v3 -> v4: > >> use crc32 to get hash result instead of md5 > >> add DirtyRateStatus to denote calculation status > >> add some trace_calls to make it easier to debug > >> fix some comments accroding to review > >> > >> v2 -> v3: > >> fix size_t compile warning > >> fix codestyle checked by checkpatch.pl > >> > >> v1 -> v2: > >> use g_rand_new() to generate rand_buf > >> move RAMBLOCK_FOREACH_MIGRATABLE into migration/ram.h > >> add skip_sample_ramblock to filter sampled ramblock > >> fix multi-numa vm coredump when query dirtyrate > >> rename qapi interface and rename some structures and functions > >> succeed to compile by appling each patch > >> add test for migrating vm > >> > >> Sometimes it is neccessary to evaluate dirty page rate before migration. > >> Users could decide whether to proceed migration based on the evaluation > >> in case of vm performance loss due to heavy workload. > >> Unlikey simulating dirtylog sync which could do harm on runnning vm, > >> we provide a sample-hash method to compare hash results for samping page. > >> In this way, it would have hardly no impact on vm performance. > >> > >> Evaluate the dirtypage rate both on running and migration vm. > >> The VM specifications for migration are as follows: > >> - VM use 4-K page; > >> - the number of VCPU is 32; > >> - the total memory is 32Gigabit; > >> - use 'mempress' tool to pressurize VM(mempress 4096 1024); > >> - migration bandwidth is 1GB/s > >> > >> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > >> | | running | migrating | > >> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > >> | no mempress | 4MB/s | 8MB/s (migrated success) | > >> ------------------------------------------------------------------------------------------- > >> | mempress 4096 1024 | 1060MB/s | 456MB/s ~ 1142MB/s (cpu throttle triggered) | > >> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > >> | mempress 4096 4096 | 4114MB/s | 688MB/s ~ 4132MB/s (cpu throttle triggered) | > >> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > >> > >> Test dirtyrate by qmp command like this: > >> 1. virsh qemu-monitor-command [vmname] '{"execute":"calc-dirty-rate", "arguments": {"calc-time": [sleep-time]}}'; > >> 2. sleep specific time which is a bit larger than sleep-time > >> 3. virsh qemu-monitor-command [vmname] '{"execute":"query-dirty-rate"}' > > > > Thanks; it looks like we have a full set of reviews; I'll try and add > > this for the next migration pull. > > > >> The qmp command returns like this: > >> {"return":{"status":"measured","dirty-rate":374,"start-time":3718293,"calc-time":1},"id":"libvirt-15"} > >> > >> Further test dirtyrate by libvirt api like this: > >> virsh getdirtyrate [vmname] [sleep-time] > > > > So do you have some libvirt patches you're going to post? > > > > Dave > > > > Hi, Dave. > > Yes, libvirt(including libvirt-python) interface will come after this qemu series patch:) OK, great; please cc in jdenemar@redhat.com when you do. Dave > >> Chuan Zheng (12): > >> migration/dirtyrate: setup up query-dirtyrate framwork > >> migration/dirtyrate: add DirtyRateStatus to denote calculation status > >> migration/dirtyrate: Add RamblockDirtyInfo to store sampled page info > >> migration/dirtyrate: Add dirtyrate statistics series functions > >> migration/dirtyrate: move RAMBLOCK_FOREACH_MIGRATABLE into ram.h > >> migration/dirtyrate: Record hash results for each sampled page > >> migration/dirtyrate: Compare page hash results for recorded sampled > >> page > >> migration/dirtyrate: skip sampling ramblock with size below > >> MIN_RAMBLOCK_SIZE > >> migration/dirtyrate: Implement set_sample_page_period() and > >> is_sample_period_valid() > >> migration/dirtyrate: Implement calculate_dirtyrate() function > >> migration/dirtyrate: Implement > >> qmp_cal_dirty_rate()/qmp_get_dirty_rate() function > >> migration/dirtyrate: Add trace_calls to make it easier to debug > >> > >> migration/dirtyrate.c | 426 +++++++++++++++++++++++++++++++++++++++++++++++++ > >> migration/dirtyrate.h | 70 ++++++++ > >> migration/meson.build | 2 +- > >> migration/ram.c | 11 +- > >> migration/ram.h | 10 ++ > >> migration/trace-events | 8 + > >> qapi/migration.json | 67 ++++++++ > >> 7 files changed, 583 insertions(+), 11 deletions(-) > >> create mode 100644 migration/dirtyrate.c > >> create mode 100644 migration/dirtyrate.h > >> > >> -- > >> 1.8.3.1 > >> >
On 2020/9/17 17:38, Dr. David Alan Gilbert wrote: > * Zheng Chuan (zhengchuan@huawei.com) wrote: >> >> >> On 2020/9/17 17:15, Dr. David Alan Gilbert wrote: >>> * Chuan Zheng (zhengchuan@huawei.com) wrote: >>>> v9 -> v10: >>>> rename find_page_matched as find_block_matched >>>> fix wrong termination condition in find_block_matched >>>> add review-by for patches >>>> >>>> v8 -> v9: >>>> fix wrong index return of record_ramblock_hash_info >>>> optimize variable name according to review >>>> reset dirty_rate as -1 >>>> change returns of compare_page_hash_info to bool >>>> >>>> v7 -> v8: >>>> add atomic_read for dirtyrate status >>>> add error_report if set dirtyrate state failed >>>> change returns of save_ramblock_hash and record_ramblock_hash_info to bool >>>> alloc ramblock dirtyinfo array at one time >>>> add review-by for patches >>>> >>>> v6 -> v7: >>>> fix minior comments and coding style by review >>>> add review-by for patches >>>> >>>> v5 -> v6: >>>> fix coding style according to review >>>> use TARGET_PAGE_SIZE and TARGET_PAGE_BITS instead of self-defined macros >>>> return start-time and calc-time by qmp command >>>> >>>> v4 -> v5: >>>> fix git apply failed due to meson-build >>>> add review-by for patches in v3 >>>> >>>> v3 -> v4: >>>> use crc32 to get hash result instead of md5 >>>> add DirtyRateStatus to denote calculation status >>>> add some trace_calls to make it easier to debug >>>> fix some comments accroding to review >>>> >>>> v2 -> v3: >>>> fix size_t compile warning >>>> fix codestyle checked by checkpatch.pl >>>> >>>> v1 -> v2: >>>> use g_rand_new() to generate rand_buf >>>> move RAMBLOCK_FOREACH_MIGRATABLE into migration/ram.h >>>> add skip_sample_ramblock to filter sampled ramblock >>>> fix multi-numa vm coredump when query dirtyrate >>>> rename qapi interface and rename some structures and functions >>>> succeed to compile by appling each patch >>>> add test for migrating vm >>>> >>>> Sometimes it is neccessary to evaluate dirty page rate before migration. >>>> Users could decide whether to proceed migration based on the evaluation >>>> in case of vm performance loss due to heavy workload. >>>> Unlikey simulating dirtylog sync which could do harm on runnning vm, >>>> we provide a sample-hash method to compare hash results for samping page. >>>> In this way, it would have hardly no impact on vm performance. >>>> >>>> Evaluate the dirtypage rate both on running and migration vm. >>>> The VM specifications for migration are as follows: >>>> - VM use 4-K page; >>>> - the number of VCPU is 32; >>>> - the total memory is 32Gigabit; >>>> - use 'mempress' tool to pressurize VM(mempress 4096 1024); >>>> - migration bandwidth is 1GB/s >>>> >>>> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >>>> | | running | migrating | >>>> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >>>> | no mempress | 4MB/s | 8MB/s (migrated success) | >>>> ------------------------------------------------------------------------------------------- >>>> | mempress 4096 1024 | 1060MB/s | 456MB/s ~ 1142MB/s (cpu throttle triggered) | >>>> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >>>> | mempress 4096 4096 | 4114MB/s | 688MB/s ~ 4132MB/s (cpu throttle triggered) | >>>> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >>>> >>>> Test dirtyrate by qmp command like this: >>>> 1. virsh qemu-monitor-command [vmname] '{"execute":"calc-dirty-rate", "arguments": {"calc-time": [sleep-time]}}'; >>>> 2. sleep specific time which is a bit larger than sleep-time >>>> 3. virsh qemu-monitor-command [vmname] '{"execute":"query-dirty-rate"}' >>> >>> Thanks; it looks like we have a full set of reviews; I'll try and add >>> this for the next migration pull. >>> >>>> The qmp command returns like this: >>>> {"return":{"status":"measured","dirty-rate":374,"start-time":3718293,"calc-time":1},"id":"libvirt-15"} >>>> >>>> Further test dirtyrate by libvirt api like this: >>>> virsh getdirtyrate [vmname] [sleep-time] >>> >>> So do you have some libvirt patches you're going to post? >>> >>> Dave >>> >> >> Hi, Dave. >> >> Yes, libvirt(including libvirt-python) interface will come after this qemu series patch:) > > OK, great; please cc in jdenemar@redhat.com when you do. > > Dave > Sure, will post it asap:) >>>> Chuan Zheng (12): >>>> migration/dirtyrate: setup up query-dirtyrate framwork >>>> migration/dirtyrate: add DirtyRateStatus to denote calculation status >>>> migration/dirtyrate: Add RamblockDirtyInfo to store sampled page info >>>> migration/dirtyrate: Add dirtyrate statistics series functions >>>> migration/dirtyrate: move RAMBLOCK_FOREACH_MIGRATABLE into ram.h >>>> migration/dirtyrate: Record hash results for each sampled page >>>> migration/dirtyrate: Compare page hash results for recorded sampled >>>> page >>>> migration/dirtyrate: skip sampling ramblock with size below >>>> MIN_RAMBLOCK_SIZE >>>> migration/dirtyrate: Implement set_sample_page_period() and >>>> is_sample_period_valid() >>>> migration/dirtyrate: Implement calculate_dirtyrate() function >>>> migration/dirtyrate: Implement >>>> qmp_cal_dirty_rate()/qmp_get_dirty_rate() function >>>> migration/dirtyrate: Add trace_calls to make it easier to debug >>>> >>>> migration/dirtyrate.c | 426 +++++++++++++++++++++++++++++++++++++++++++++++++ >>>> migration/dirtyrate.h | 70 ++++++++ >>>> migration/meson.build | 2 +- >>>> migration/ram.c | 11 +- >>>> migration/ram.h | 10 ++ >>>> migration/trace-events | 8 + >>>> qapi/migration.json | 67 ++++++++ >>>> 7 files changed, 583 insertions(+), 11 deletions(-) >>>> create mode 100644 migration/dirtyrate.c >>>> create mode 100644 migration/dirtyrate.h >>>> >>>> -- >>>> 1.8.3.1 >>>> >>
Queued * Chuan Zheng (zhengchuan@huawei.com) wrote: > v9 -> v10: > rename find_page_matched as find_block_matched > fix wrong termination condition in find_block_matched > add review-by for patches > > v8 -> v9: > fix wrong index return of record_ramblock_hash_info > optimize variable name according to review > reset dirty_rate as -1 > change returns of compare_page_hash_info to bool > > v7 -> v8: > add atomic_read for dirtyrate status > add error_report if set dirtyrate state failed > change returns of save_ramblock_hash and record_ramblock_hash_info to bool > alloc ramblock dirtyinfo array at one time > add review-by for patches > > v6 -> v7: > fix minior comments and coding style by review > add review-by for patches > > v5 -> v6: > fix coding style according to review > use TARGET_PAGE_SIZE and TARGET_PAGE_BITS instead of self-defined macros > return start-time and calc-time by qmp command > > v4 -> v5: > fix git apply failed due to meson-build > add review-by for patches in v3 > > v3 -> v4: > use crc32 to get hash result instead of md5 > add DirtyRateStatus to denote calculation status > add some trace_calls to make it easier to debug > fix some comments accroding to review > > v2 -> v3: > fix size_t compile warning > fix codestyle checked by checkpatch.pl > > v1 -> v2: > use g_rand_new() to generate rand_buf > move RAMBLOCK_FOREACH_MIGRATABLE into migration/ram.h > add skip_sample_ramblock to filter sampled ramblock > fix multi-numa vm coredump when query dirtyrate > rename qapi interface and rename some structures and functions > succeed to compile by appling each patch > add test for migrating vm > > Sometimes it is neccessary to evaluate dirty page rate before migration. > Users could decide whether to proceed migration based on the evaluation > in case of vm performance loss due to heavy workload. > Unlikey simulating dirtylog sync which could do harm on runnning vm, > we provide a sample-hash method to compare hash results for samping page. > In this way, it would have hardly no impact on vm performance. > > Evaluate the dirtypage rate both on running and migration vm. > The VM specifications for migration are as follows: > - VM use 4-K page; > - the number of VCPU is 32; > - the total memory is 32Gigabit; > - use 'mempress' tool to pressurize VM(mempress 4096 1024); > - migration bandwidth is 1GB/s > > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > | | running | migrating | > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > | no mempress | 4MB/s | 8MB/s (migrated success) | > ------------------------------------------------------------------------------------------- > | mempress 4096 1024 | 1060MB/s | 456MB/s ~ 1142MB/s (cpu throttle triggered) | > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > | mempress 4096 4096 | 4114MB/s | 688MB/s ~ 4132MB/s (cpu throttle triggered) | > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > Test dirtyrate by qmp command like this: > 1. virsh qemu-monitor-command [vmname] '{"execute":"calc-dirty-rate", "arguments": {"calc-time": [sleep-time]}}'; > 2. sleep specific time which is a bit larger than sleep-time > 3. virsh qemu-monitor-command [vmname] '{"execute":"query-dirty-rate"}' > > The qmp command returns like this: > {"return":{"status":"measured","dirty-rate":374,"start-time":3718293,"calc-time":1},"id":"libvirt-15"} > > Further test dirtyrate by libvirt api like this: > virsh getdirtyrate [vmname] [sleep-time] > > Chuan Zheng (12): > migration/dirtyrate: setup up query-dirtyrate framwork > migration/dirtyrate: add DirtyRateStatus to denote calculation status > migration/dirtyrate: Add RamblockDirtyInfo to store sampled page info > migration/dirtyrate: Add dirtyrate statistics series functions > migration/dirtyrate: move RAMBLOCK_FOREACH_MIGRATABLE into ram.h > migration/dirtyrate: Record hash results for each sampled page > migration/dirtyrate: Compare page hash results for recorded sampled > page > migration/dirtyrate: skip sampling ramblock with size below > MIN_RAMBLOCK_SIZE > migration/dirtyrate: Implement set_sample_page_period() and > is_sample_period_valid() > migration/dirtyrate: Implement calculate_dirtyrate() function > migration/dirtyrate: Implement > qmp_cal_dirty_rate()/qmp_get_dirty_rate() function > migration/dirtyrate: Add trace_calls to make it easier to debug > > migration/dirtyrate.c | 426 +++++++++++++++++++++++++++++++++++++++++++++++++ > migration/dirtyrate.h | 70 ++++++++ > migration/meson.build | 2 +- > migration/ram.c | 11 +- > migration/ram.h | 10 ++ > migration/trace-events | 8 + > qapi/migration.json | 67 ++++++++ > 7 files changed, 583 insertions(+), 11 deletions(-) > create mode 100644 migration/dirtyrate.c > create mode 100644 migration/dirtyrate.h > > -- > 1.8.3.1 > >
On 9/23/20 1:04 PM, Dr. David Alan Gilbert wrote: > Queued > > * Chuan Zheng (zhengchuan@huawei.com) wrote: >> v9 -> v10: >> rename find_page_matched as find_block_matched >> fix wrong termination condition in find_block_matched >> add review-by for patches Sorry for a late review, but I suggested a QAPI tweak to 11/12.
v9 -> v10: rename find_page_matched as find_block_matched fix wrong termination condition in find_block_matched add review-by for patches v8 -> v9: fix wrong index return of record_ramblock_hash_info optimize variable name according to review reset dirty_rate as -1 change returns of compare_page_hash_info to bool v7 -> v8: add atomic_read for dirtyrate status add error_report if set dirtyrate state failed change returns of save_ramblock_hash and record_ramblock_hash_info to bool alloc ramblock dirtyinfo array at one time add review-by for patches v6 -> v7: fix minior comments and coding style by review add review-by for patches v5 -> v6: fix coding style according to review use TARGET_PAGE_SIZE and TARGET_PAGE_BITS instead of self-defined macros return start-time and calc-time by qmp command v4 -> v5: fix git apply failed due to meson-build add review-by for patches in v3 v3 -> v4: use crc32 to get hash result instead of md5 add DirtyRateStatus to denote calculation status add some trace_calls to make it easier to debug fix some comments accroding to review v2 -> v3: fix size_t compile warning fix codestyle checked by checkpatch.pl v1 -> v2: use g_rand_new() to generate rand_buf move RAMBLOCK_FOREACH_MIGRATABLE into migration/ram.h add skip_sample_ramblock to filter sampled ramblock fix multi-numa vm coredump when query dirtyrate rename qapi interface and rename some structures and functions succeed to compile by appling each patch add test for migrating vm Sometimes it is neccessary to evaluate dirty page rate before migration. Users could decide whether to proceed migration based on the evaluation in case of vm performance loss due to heavy workload. Unlikey simulating dirtylog sync which could do harm on runnning vm, we provide a sample-hash method to compare hash results for samping page. In this way, it would have hardly no impact on vm performance. Evaluate the dirtypage rate both on running and migration vm. The VM specifications for migration are as follows: - VM use 4-K page; - the number of VCPU is 32; - the total memory is 32Gigabit; - use 'mempress' tool to pressurize VM(mempress 4096 1024); - migration bandwidth is 1GB/s +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | running | migrating | +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | no mempress | 4MB/s | 8MB/s (migrated success) | ------------------------------------------------------------------------------------------- | mempress 4096 1024 | 1060MB/s | 456MB/s ~ 1142MB/s (cpu throttle triggered) | +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | mempress 4096 4096 | 4114MB/s | 688MB/s ~ 4132MB/s (cpu throttle triggered) | +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Test dirtyrate by qmp command like this: 1. virsh qemu-monitor-command [vmname] '{"execute":"calc-dirty-rate", "arguments": {"calc-time": [sleep-time]}}'; 2. sleep specific time which is a bit larger than sleep-time 3. virsh qemu-monitor-command [vmname] '{"execute":"query-dirty-rate"}' The qmp command returns like this: {"return":{"status":"measured","dirty-rate":374,"start-time":3718293,"calc-time":1},"id":"libvirt-15"} Further test dirtyrate by libvirt api like this: virsh getdirtyrate [vmname] [sleep-time] Chuan Zheng (12): migration/dirtyrate: setup up query-dirtyrate framwork migration/dirtyrate: add DirtyRateStatus to denote calculation status migration/dirtyrate: Add RamblockDirtyInfo to store sampled page info migration/dirtyrate: Add dirtyrate statistics series functions migration/dirtyrate: move RAMBLOCK_FOREACH_MIGRATABLE into ram.h migration/dirtyrate: Record hash results for each sampled page migration/dirtyrate: Compare page hash results for recorded sampled page migration/dirtyrate: skip sampling ramblock with size below MIN_RAMBLOCK_SIZE migration/dirtyrate: Implement set_sample_page_period() and is_sample_period_valid() migration/dirtyrate: Implement calculate_dirtyrate() function migration/dirtyrate: Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() function migration/dirtyrate: Add trace_calls to make it easier to debug migration/dirtyrate.c | 426 +++++++++++++++++++++++++++++++++++++++++++++++++ migration/dirtyrate.h | 70 ++++++++ migration/meson.build | 2 +- migration/ram.c | 11 +- migration/ram.h | 10 ++ migration/trace-events | 8 + qapi/migration.json | 67 ++++++++ 7 files changed, 583 insertions(+), 11 deletions(-) create mode 100644 migration/dirtyrate.c create mode 100644 migration/dirtyrate.h