| Message ID | 20200918153829.14686-2-grygorii.strashko@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: ti: k3-j7200: add dma and mcu cpsw | expand |
Hi Grygorii, On 9/18/20 10:38 AM, Grygorii Strashko wrote: > From: Peter Ujfalusi <peter.ujfalusi@ti.com> > > Add the intr, inta, ringacc and udmap nodes for main and mcu NAVSS. Need to update the changelog, intr and inta are not part of this revised series. > > Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> > Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> > Tested-by: Kishon Vijay Abraham I <kishon@ti.com> > --- > arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 36 +++++++++++++++ > .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 44 +++++++++++++++++++ > 2 files changed, 80 insertions(+) > > diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi > index 3df49577b06a..c5015df58cd4 100644 > --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi > @@ -93,6 +93,42 @@ > interrupt-names = "rx_011"; > interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; > }; > + > + main_ringacc: ringacc@3c000000 { > + compatible = "ti,am654-navss-ringacc"; > + reg = <0x0 0x3c000000 0x0 0x400000>, > + <0x0 0x38000000 0x0 0x400000>, > + <0x0 0x31120000 0x0 0x100>, > + <0x0 0x33000000 0x0 0x40000>; > + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; > + ti,num-rings = <1024>; > + ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */ > + ti,sci = <&dmsc>; > + ti,sci-dev-id = <211>; > + msi-parent = <&main_udmass_inta>; > + }; > + > + main_udmap: dma-controller@31150000 { > + compatible = "ti,j721e-navss-main-udmap"; > + reg = <0x0 0x31150000 0x0 0x100>, > + <0x0 0x34000000 0x0 0x100000>, > + <0x0 0x35000000 0x0 0x100000>; > + reg-names = "gcfg", "rchanrt", "tchanrt"; > + msi-parent = <&main_udmass_inta>; > + #dma-cells = <1>; > + > + ti,sci = <&dmsc>; > + ti,sci-dev-id = <212>; > + ti,ringacc = <&main_ringacc>; > + > + ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */ > + <0x0f>, /* TX_HCHAN */ > + <0x10>; /* TX_UHCHAN */ > + ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */ > + <0x0b>, /* RX_HCHAN */ > + <0x0c>; /* RX_UHCHAN */ > + ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ > + }; > }; > > main_pmx0: pinctrl@11c000 { > diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi > index ec2745e0768e..7ecdfdb46436 100644 > --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi > @@ -92,4 +92,48 @@ > ti,sci-dev-id = <137>; > ti,interrupt-ranges = <16 960 16>; > }; > + > + cbass_mcu_navss: navss@28380000 { > + compatible = "simple-mfd"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + dma-coherent; > + dma-ranges; > + ti,sci-dev-id = <232>; > + > + mcu_ringacc: ringacc@2b800000 { > + compatible = "ti,am654-navss-ringacc"; > + reg = <0x0 0x2b800000 0x0 0x400000>, > + <0x0 0x2b000000 0x0 0x400000>, > + <0x0 0x28590000 0x0 0x100>, > + <0x0 0x2a500000 0x0 0x40000>; Please use style consistent with existing dts nodes, not a fan of mismatched usage. We are using 0x00 for the higher 32-bit addresses and sizes. Comment applies to all the nodes and all patches in the series. regards Suman > + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; > + ti,num-rings = <286>; > + ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */ > + ti,sci = <&dmsc>; > + ti,sci-dev-id = <235>; > + msi-parent = <&main_udmass_inta>; > + }; > + > + mcu_udmap: dma-controller@285c0000 { > + compatible = "ti,j721e-navss-mcu-udmap"; > + reg = <0x0 0x285c0000 0x0 0x100>, > + <0x0 0x2a800000 0x0 0x40000>, > + <0x0 0x2aa00000 0x0 0x40000>; > + reg-names = "gcfg", "rchanrt", "tchanrt"; > + msi-parent = <&main_udmass_inta>; > + #dma-cells = <1>; > + > + ti,sci = <&dmsc>; > + ti,sci-dev-id = <236>; > + ti,ringacc = <&mcu_ringacc>; > + > + ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */ > + <0x0f>; /* TX_HCHAN */ > + ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */ > + <0x0b>; /* RX_HCHAN */ > + ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ > + }; > + }; > }; >
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index 3df49577b06a..c5015df58cd4 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -93,6 +93,42 @@ interrupt-names = "rx_011"; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; }; + + main_ringacc: ringacc@3c000000 { + compatible = "ti,am654-navss-ringacc"; + reg = <0x0 0x3c000000 0x0 0x400000>, + <0x0 0x38000000 0x0 0x400000>, + <0x0 0x31120000 0x0 0x100>, + <0x0 0x33000000 0x0 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + ti,num-rings = <1024>; + ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */ + ti,sci = <&dmsc>; + ti,sci-dev-id = <211>; + msi-parent = <&main_udmass_inta>; + }; + + main_udmap: dma-controller@31150000 { + compatible = "ti,j721e-navss-main-udmap"; + reg = <0x0 0x31150000 0x0 0x100>, + <0x0 0x34000000 0x0 0x100000>, + <0x0 0x35000000 0x0 0x100000>; + reg-names = "gcfg", "rchanrt", "tchanrt"; + msi-parent = <&main_udmass_inta>; + #dma-cells = <1>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <212>; + ti,ringacc = <&main_ringacc>; + + ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */ + <0x0f>, /* TX_HCHAN */ + <0x10>; /* TX_UHCHAN */ + ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */ + <0x0b>, /* RX_HCHAN */ + <0x0c>; /* RX_UHCHAN */ + ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ + }; }; main_pmx0: pinctrl@11c000 { diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index ec2745e0768e..7ecdfdb46436 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -92,4 +92,48 @@ ti,sci-dev-id = <137>; ti,interrupt-ranges = <16 960 16>; }; + + cbass_mcu_navss: navss@28380000 { + compatible = "simple-mfd"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-coherent; + dma-ranges; + ti,sci-dev-id = <232>; + + mcu_ringacc: ringacc@2b800000 { + compatible = "ti,am654-navss-ringacc"; + reg = <0x0 0x2b800000 0x0 0x400000>, + <0x0 0x2b000000 0x0 0x400000>, + <0x0 0x28590000 0x0 0x100>, + <0x0 0x2a500000 0x0 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + ti,num-rings = <286>; + ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */ + ti,sci = <&dmsc>; + ti,sci-dev-id = <235>; + msi-parent = <&main_udmass_inta>; + }; + + mcu_udmap: dma-controller@285c0000 { + compatible = "ti,j721e-navss-mcu-udmap"; + reg = <0x0 0x285c0000 0x0 0x100>, + <0x0 0x2a800000 0x0 0x40000>, + <0x0 0x2aa00000 0x0 0x40000>; + reg-names = "gcfg", "rchanrt", "tchanrt"; + msi-parent = <&main_udmass_inta>; + #dma-cells = <1>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <236>; + ti,ringacc = <&mcu_ringacc>; + + ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */ + <0x0f>; /* TX_HCHAN */ + ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */ + <0x0b>; /* RX_HCHAN */ + ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ + }; + }; };