| Message ID | 20200920132621.26468-2-afaerber@suse.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | net: wireless: rtw88: Fix oops on probe errors | expand |
Andreas Färber <afaerber@suse.de> wrote: > In case of rtw8822be, a probe failure after successful rtw_core_init() > has been observed to occasionally lead to an oops from rtw_load_firmware_cb(): > > [ 3.924268] pci 0001:01:00.0: [10ec:b822] type 00 class 0xff0000 > [ 3.930531] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff] > [ 3.936360] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit] > [ 3.944042] pci 0001:01:00.0: supports D1 D2 > [ 3.948438] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 3.957312] pci 0001:01:00.0: BAR 2: no space for [mem size 0x00010000 64bit] > [ 3.964645] pci 0001:01:00.0: BAR 2: failed to assign [mem size 0x00010000 64bit] > [ 3.972332] pci 0001:01:00.0: BAR 0: assigned [io 0x10000-0x100ff] > [ 3.986240] rtw_8822be 0001:01:00.0: enabling device (0000 -> 0001) > [ 3.992735] rtw_8822be 0001:01:00.0: failed to map pci memory > [ 3.998638] rtw_8822be 0001:01:00.0: failed to request pci io region > [ 4.005166] rtw_8822be 0001:01:00.0: failed to setup pci resources > [ 4.011580] rtw_8822be: probe of 0001:01:00.0 failed with error -12 > [ 4.018827] cfg80211: Loading compiled-in X.509 certificates for regulatory database > [ 4.029121] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' > [ 4.050828] Unable to handle kernel paging request at virtual address edafeaac9607952c > [ 4.058975] Mem abort info: > [ 4.058980] ESR = 0x96000004 > [ 4.058990] EC = 0x25: DABT (current EL), IL = 32 bits > [ 4.070353] SET = 0, FnV = 0 > [ 4.073487] EA = 0, S1PTW = 0 > [ 4.073501] dw-apb-uart 98007800.serial: forbid DMA for kernel console > [ 4.076723] Data abort info: > [ 4.086415] ISV = 0, ISS = 0x00000004 > [ 4.087731] Freeing unused kernel memory: 1792K > [ 4.090391] CM = 0, WnR = 0 > [ 4.098091] [edafeaac9607952c] address between user and kernel address ranges > [ 4.105418] Internal error: Oops: 96000004 [#1] PREEMPT SMP > [ 4.111129] Modules linked in: > [ 4.114275] CPU: 1 PID: 31 Comm: kworker/1:1 Not tainted 5.9.0-rc5-next-20200915+ #700 > [ 4.122386] Hardware name: Realtek Saola EVB (DT) > [ 4.127223] Workqueue: events request_firmware_work_func > [ 4.132676] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) > [ 4.138393] pc : rtw_load_firmware_cb+0x54/0xbc > [ 4.143040] lr : request_firmware_work_func+0x44/0xb4 > [ 4.148217] sp : ffff800010133d70 > [ 4.151616] x29: ffff800010133d70 x28: 0000000000000000 > [ 4.157069] x27: 0000000000000000 x26: 0000000000000000 > [ 4.162520] x25: 0000000000000000 x24: 0000000000000000 > [ 4.167971] x23: ffff00007ac21908 x22: ffff00007ebb2100 > [ 4.173424] x21: ffff00007ad35880 x20: edafeaac96079504 > [ 4.178877] x19: ffff00007ad35870 x18: 0000000000000000 > [ 4.184328] x17: 00000000000044d8 x16: 0000000000004310 > [ 4.189780] x15: 0000000000000800 x14: 00000000ef006305 > [ 4.195231] x13: ffffffff00000000 x12: ffffffffffffffff > [ 4.200682] x11: 0000000000000020 x10: 0000000000000003 > [ 4.206135] x9 : 0000000000000000 x8 : ffff00007e73f680 > [ 4.211585] x7 : 0000000000000000 x6 : ffff80001119b588 > [ 4.217036] x5 : ffff00007e649c80 x4 : ffff00007e649c80 > [ 4.222487] x3 : ffff80001119b588 x2 : ffff8000108d1718 > [ 4.227940] x1 : ffff800011bd5000 x0 : ffff00007ac21600 > [ 4.233391] Call trace: > [ 4.235906] rtw_load_firmware_cb+0x54/0xbc > [ 4.240198] request_firmware_work_func+0x44/0xb4 > [ 4.245027] process_one_work+0x178/0x1e4 > [ 4.249142] worker_thread+0x1d0/0x268 > [ 4.252989] kthread+0xe8/0xf8 > [ 4.256127] ret_from_fork+0x10/0x18 > [ 4.259800] Code: f94013f5 a8c37bfd d65f03c0 f9000260 (f9401681) > [ 4.266049] ---[ end trace f822ebae1a8545c2 ]--- > > To avoid this, wait on the completion callbacks in rtw_core_deinit() > before releasing firmware and continuing teardown. > > Note that rtw_wait_firmware_completion() was introduced with > c8e5695eae9959fc5774c0f490f2450be8bad3de ("rtw88: load wowlan firmware > if wowlan is supported"), so backports to earlier branches may need to > inline wait_for_completion(&rtwdev->fw.completion) instead. > > Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") > Fixes: c8e5695eae99 ("rtw88: load wowlan firmware if wowlan is supported") > Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> > Signed-off-by: Andreas Färber <afaerber@suse.de> 2 patches applied to wireless-drivers-next.git, thanks. ecda9cda3338 rtw88: Fix probe error handling race with firmware loading ac4bac99161e rtw88: Fix potential probe error handling race with wow firmware loading
diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c index 9770982b2f14..dc48ec4b0a31 100644 --- a/drivers/net/wireless/realtek/rtw88/main.c +++ b/drivers/net/wireless/realtek/rtw88/main.c @@ -1486,6 +1486,8 @@ void rtw_core_deinit(struct rtw_dev *rtwdev) struct rtw_rsvd_page *rsvd_pkt, *tmp; unsigned long flags; + rtw_wait_firmware_completion(rtwdev); + if (fw->firmware) release_firmware(fw->firmware);
In case of rtw8822be, a probe failure after successful rtw_core_init() has been observed to occasionally lead to an oops from rtw_load_firmware_cb(): [ 3.924268] pci 0001:01:00.0: [10ec:b822] type 00 class 0xff0000 [ 3.930531] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.936360] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit] [ 3.944042] pci 0001:01:00.0: supports D1 D2 [ 3.948438] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.957312] pci 0001:01:00.0: BAR 2: no space for [mem size 0x00010000 64bit] [ 3.964645] pci 0001:01:00.0: BAR 2: failed to assign [mem size 0x00010000 64bit] [ 3.972332] pci 0001:01:00.0: BAR 0: assigned [io 0x10000-0x100ff] [ 3.986240] rtw_8822be 0001:01:00.0: enabling device (0000 -> 0001) [ 3.992735] rtw_8822be 0001:01:00.0: failed to map pci memory [ 3.998638] rtw_8822be 0001:01:00.0: failed to request pci io region [ 4.005166] rtw_8822be 0001:01:00.0: failed to setup pci resources [ 4.011580] rtw_8822be: probe of 0001:01:00.0 failed with error -12 [ 4.018827] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.029121] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.050828] Unable to handle kernel paging request at virtual address edafeaac9607952c [ 4.058975] Mem abort info: [ 4.058980] ESR = 0x96000004 [ 4.058990] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.070353] SET = 0, FnV = 0 [ 4.073487] EA = 0, S1PTW = 0 [ 4.073501] dw-apb-uart 98007800.serial: forbid DMA for kernel console [ 4.076723] Data abort info: [ 4.086415] ISV = 0, ISS = 0x00000004 [ 4.087731] Freeing unused kernel memory: 1792K [ 4.090391] CM = 0, WnR = 0 [ 4.098091] [edafeaac9607952c] address between user and kernel address ranges [ 4.105418] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 4.111129] Modules linked in: [ 4.114275] CPU: 1 PID: 31 Comm: kworker/1:1 Not tainted 5.9.0-rc5-next-20200915+ #700 [ 4.122386] Hardware name: Realtek Saola EVB (DT) [ 4.127223] Workqueue: events request_firmware_work_func [ 4.132676] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) [ 4.138393] pc : rtw_load_firmware_cb+0x54/0xbc [ 4.143040] lr : request_firmware_work_func+0x44/0xb4 [ 4.148217] sp : ffff800010133d70 [ 4.151616] x29: ffff800010133d70 x28: 0000000000000000 [ 4.157069] x27: 0000000000000000 x26: 0000000000000000 [ 4.162520] x25: 0000000000000000 x24: 0000000000000000 [ 4.167971] x23: ffff00007ac21908 x22: ffff00007ebb2100 [ 4.173424] x21: ffff00007ad35880 x20: edafeaac96079504 [ 4.178877] x19: ffff00007ad35870 x18: 0000000000000000 [ 4.184328] x17: 00000000000044d8 x16: 0000000000004310 [ 4.189780] x15: 0000000000000800 x14: 00000000ef006305 [ 4.195231] x13: ffffffff00000000 x12: ffffffffffffffff [ 4.200682] x11: 0000000000000020 x10: 0000000000000003 [ 4.206135] x9 : 0000000000000000 x8 : ffff00007e73f680 [ 4.211585] x7 : 0000000000000000 x6 : ffff80001119b588 [ 4.217036] x5 : ffff00007e649c80 x4 : ffff00007e649c80 [ 4.222487] x3 : ffff80001119b588 x2 : ffff8000108d1718 [ 4.227940] x1 : ffff800011bd5000 x0 : ffff00007ac21600 [ 4.233391] Call trace: [ 4.235906] rtw_load_firmware_cb+0x54/0xbc [ 4.240198] request_firmware_work_func+0x44/0xb4 [ 4.245027] process_one_work+0x178/0x1e4 [ 4.249142] worker_thread+0x1d0/0x268 [ 4.252989] kthread+0xe8/0xf8 [ 4.256127] ret_from_fork+0x10/0x18 [ 4.259800] Code: f94013f5 a8c37bfd d65f03c0 f9000260 (f9401681) [ 4.266049] ---[ end trace f822ebae1a8545c2 ]--- To avoid this, wait on the completion callbacks in rtw_core_deinit() before releasing firmware and continuing teardown. Note that rtw_wait_firmware_completion() was introduced with c8e5695eae9959fc5774c0f490f2450be8bad3de ("rtw88: load wowlan firmware if wowlan is supported"), so backports to earlier branches may need to inline wait_for_completion(&rtwdev->fw.completion) instead. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Fixes: c8e5695eae99 ("rtw88: load wowlan firmware if wowlan is supported") Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Andreas Färber <afaerber@suse.de> --- drivers/net/wireless/realtek/rtw88/main.c | 2 ++ 1 file changed, 2 insertions(+)