diff mbox series

[2/8] arm64: dts: meson: update leds node on Khadas VIM3/VIM3L boards meson-khadas-vim3

Message ID 20200925033017.1790973-3-art@khadas.com (mailing list archive)
State New, archived
Headers show
Series dts updates and fixes for Khadas VIM1 VIM2 VIM3 VIML boards | expand

Commit Message

Artem Lapkin Sept. 25, 2020, 3:30 a.m. UTC 
GPIO_ACTIVE_LOW replaced to GPIO_ACTIVE_HIGH for white and red leds

Signed-off-by: Artem Lapkin <art@khadas.com>
---
 arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Neil Armstrong Sept. 25, 2020, 7:36 a.m. UTC | #1 
On 25/09/2020 05:30, Artem Lapkin wrote:
> GPIO_ACTIVE_LOW replaced to GPIO_ACTIVE_HIGH for white and red leds
> 
> Signed-off-by: Artem Lapkin <art@khadas.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
> index 94f75b44650..73783692e30 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
> @@ -41,13 +41,13 @@ leds {
>  
>  		led-white {
>  			label = "vim3:white:sys";
> -			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
> +			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
>  			linux,default-trigger = "heartbeat";
>  		};
>  
>  		led-red {
>  			label = "vim3:red";
> -			gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
> +			gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>;
>  		};
>  	};
>  
> 

This has already been fixed and applied for 5.10:
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git/commit/?h=v5.10/dt64&id=1f9d87d08e4a2299e86f8a1600aedf87ecd3b636

Neil
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 94f75b44650..73783692e30 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -41,13 +41,13 @@  leds {
 
 		led-white {
 			label = "vim3:white:sys";
-			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		led-red {
 			label = "vim3:red";
-			gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>;
 		};
 	};