| Message ID | 20200821075452.1543610-1-enric.balletbo@collabora.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] pinctrl: mediatek: Free eint data on failure | expand |
Hi Linus, On 21/8/20 9:54, Enric Balletbo i Serra wrote: > The pinctrl driver can work without the EINT resource, but, if it is > expected to have this resource but the mtk_build_eint() function fails > after allocating their data (because can't get the resource or can't map > the irq), the data is not freed and you end with a NULL pointer > dereference. Fix this by freeing the data if mtk_build_eint() fails, so > pinctrl still works and doesn't hang. > > This is noticeable after commit f97dbf48ca43 ("irqchip/mtk-sysirq: Convert > to a platform driver") on MT8183 because, due this commit, the pinctrl driver > fails to map the irq and spots the following bug: > > [ 1.947597] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 > [ 1.956404] Mem abort info: > [ 1.959203] ESR = 0x96000004 > [ 1.962259] EC = 0x25: DABT (current EL), IL = 32 bits > [ 1.967565] SET = 0, FnV = 0 > [ 1.970613] EA = 0, S1PTW = 0 > [ 1.973747] Data abort info: > [ 1.976619] ISV = 0, ISS = 0x00000004 > [ 1.980447] CM = 0, WnR = 0 > [ 1.983410] [0000000000000004] user address but active_mm is swapper > [ 1.989759] Internal error: Oops: 96000004 [#1] PREEMPT SMP > [ 1.995322] Modules linked in: > [ 1.998371] CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc1+ #44 > [ 2.004715] Hardware name: MediaTek krane sku176 board (DT) > [ 2.010280] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) > [ 2.015850] pc : mtk_eint_set_debounce+0x48/0x1b8 > [ 2.020546] lr : mtk_eint_set_debounce+0x34/0x1b8 > [ 2.025239] sp : ffff80001008baa0 > [ 2.028544] x29: ffff80001008baa0 x28: ffff0000ff7ff790 > [ 2.033847] x27: ffff0000f9ec34b0 x26: ffff0000f9ec3480 > [ 2.039150] x25: ffff0000fa576410 x24: ffff0000fa502800 > [ 2.044453] x23: 0000000000001388 x22: ffff0000fa635f80 > [ 2.049755] x21: 0000000000000008 x20: 0000000000000000 > [ 2.055058] x19: 0000000000000071 x18: 0000000000000001 > [ 2.060360] x17: 0000000000000000 x16: 0000000000000000 > [ 2.065662] x15: ffff0000facc8470 x14: ffffffffffffffff > [ 2.070965] x13: 0000000000000001 x12: 00000000000000c0 > [ 2.076267] x11: 0000000000000040 x10: 0000000000000070 > [ 2.081569] x9 : ffffaec0063d24d8 x8 : ffff0000fa800270 > [ 2.086872] x7 : 0000000000000000 x6 : 0000000000000011 > [ 2.092174] x5 : ffff0000fa800248 x4 : ffff0000fa800270 > [ 2.097476] x3 : ffff8000100c5000 x2 : 0000000000000000 > [ 2.102778] x1 : 0000000000000000 x0 : 0000000000000000 > [ 2.108081] Call trace: > [ 2.110520] mtk_eint_set_debounce+0x48/0x1b8 > [ 2.114870] mtk_gpio_set_config+0x5c/0x78 > [ 2.118958] gpiod_set_config+0x5c/0x78 > [ 2.122786] gpiod_set_debounce+0x18/0x28 > [ 2.126789] gpio_keys_probe+0x50c/0x910 > [ 2.130705] platform_drv_probe+0x54/0xa8 > [ 2.134705] really_probe+0xe4/0x3b0 > [ 2.138271] driver_probe_device+0x58/0xb8 > [ 2.142358] device_driver_attach+0x74/0x80 > [ 2.146532] __driver_attach+0x58/0xe0 > [ 2.150274] bus_for_each_dev+0x70/0xc0 > [ 2.154100] driver_attach+0x24/0x30 > [ 2.157666] bus_add_driver+0x14c/0x1f0 > [ 2.161493] driver_register+0x64/0x120 > [ 2.165319] __platform_driver_register+0x48/0x58 > [ 2.170017] gpio_keys_init+0x1c/0x28 > [ 2.173672] do_one_initcall+0x54/0x1b4 > [ 2.177499] kernel_init_freeable+0x1d0/0x238 > [ 2.181848] kernel_init+0x14/0x118 > [ 2.185328] ret_from_fork+0x10/0x34 > [ 2.188899] Code: a9438ac1 12001266 f94006c3 121e766a (b9400421) > [ 2.194991] ---[ end trace 168cf7b3324b6570 ]--- > [ 2.199611] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b > [ 2.207260] SMP: stopping secondary CPUs > [ 2.211294] Kernel Offset: 0x2ebff4800000 from 0xffff800010000000 > [ 2.217377] PHYS_OFFSET: 0xffffb50500000000 > [ 2.221551] CPU features: 0x0240002,2188200c > [ 2.225811] Memory Limit: none > [ 2.228860] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- > > Fixes: 89132dd8ffd2 ("pinctrl: mediatek: extend eint build to pinctrl-mtk-common-v2.c") > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> > --- A gentle ping for this fix. Thanks, Enric > > Changes in v2: > - Free the resource when needed (Sean Wang) > > .../pinctrl/mediatek/pinctrl-mtk-common-v2.c | 27 ++++++++++++++----- > 1 file changed, 20 insertions(+), 7 deletions(-) > > diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c > index 2f3dfb56c3fa..4b532e6b9038 100644 > --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c > +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c > @@ -355,6 +355,7 @@ int mtk_build_eint(struct mtk_pinctrl *hw, struct platform_device *pdev) > { > struct device_node *np = pdev->dev.of_node; > struct resource *res; > + int ret; > > if (!IS_ENABLED(CONFIG_EINT_MTK)) > return 0; > @@ -369,19 +370,26 @@ int mtk_build_eint(struct mtk_pinctrl *hw, struct platform_device *pdev) > res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "eint"); > if (!res) { > dev_err(&pdev->dev, "Unable to get eint resource\n"); > - return -ENODEV; > + ret = -ENODEV; > + goto err_free_eint; > } > > hw->eint->base = devm_ioremap_resource(&pdev->dev, res); > - if (IS_ERR(hw->eint->base)) > - return PTR_ERR(hw->eint->base); > + if (IS_ERR(hw->eint->base)) { > + ret = PTR_ERR(hw->eint->base); > + goto err_free_eint; > + } > > hw->eint->irq = irq_of_parse_and_map(np, 0); > - if (!hw->eint->irq) > - return -EINVAL; > + if (!hw->eint->irq) { > + ret = -EINVAL; > + goto err_free_eint; > + } > > - if (!hw->soc->eint_hw) > - return -ENODEV; > + if (!hw->soc->eint_hw) { > + ret = -ENODEV; > + goto err_free_eint; > + } > > hw->eint->dev = &pdev->dev; > hw->eint->hw = hw->soc->eint_hw; > @@ -389,6 +397,11 @@ int mtk_build_eint(struct mtk_pinctrl *hw, struct platform_device *pdev) > hw->eint->gpio_xlate = &mtk_eint_xt; > > return mtk_eint_do_init(hw->eint); > + > +err_free_eint: > + devm_kfree(hw->dev, hw->eint); > + hw->eint = NULL; > + return ret; > } > EXPORT_SYMBOL_GPL(mtk_build_eint); > >
Hi, Enric v2 seems the same with v1 or I was missing something. I just thought we call devm_ioremap_release to explicitly to free resource when a certain failure occurs after devm_ioremap_resource? thanks, Sean On Tue, Sep 15, 2020 at 5:38 AM Enric Balletbo i Serra <enric.balletbo@collabora.com> wrote: > > Hi Linus, > > On 21/8/20 9:54, Enric Balletbo i Serra wrote: > > The pinctrl driver can work without the EINT resource, but, if it is > > expected to have this resource but the mtk_build_eint() function fails > > after allocating their data (because can't get the resource or can't map > > the irq), the data is not freed and you end with a NULL pointer > > dereference. Fix this by freeing the data if mtk_build_eint() fails, so > > pinctrl still works and doesn't hang. > > > > This is noticeable after commit f97dbf48ca43 ("irqchip/mtk-sysirq: Convert > > to a platform driver") on MT8183 because, due this commit, the pinctrl driver > > fails to map the irq and spots the following bug: > > > > [ 1.947597] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 > > [ 1.956404] Mem abort info: > > [ 1.959203] ESR = 0x96000004 > > [ 1.962259] EC = 0x25: DABT (current EL), IL = 32 bits > > [ 1.967565] SET = 0, FnV = 0 > > [ 1.970613] EA = 0, S1PTW = 0 > > [ 1.973747] Data abort info: > > [ 1.976619] ISV = 0, ISS = 0x00000004 > > [ 1.980447] CM = 0, WnR = 0 > > [ 1.983410] [0000000000000004] user address but active_mm is swapper > > [ 1.989759] Internal error: Oops: 96000004 [#1] PREEMPT SMP > > [ 1.995322] Modules linked in: > > [ 1.998371] CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc1+ #44 > > [ 2.004715] Hardware name: MediaTek krane sku176 board (DT) > > [ 2.010280] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) > > [ 2.015850] pc : mtk_eint_set_debounce+0x48/0x1b8 > > [ 2.020546] lr : mtk_eint_set_debounce+0x34/0x1b8 > > [ 2.025239] sp : ffff80001008baa0 > > [ 2.028544] x29: ffff80001008baa0 x28: ffff0000ff7ff790 > > [ 2.033847] x27: ffff0000f9ec34b0 x26: ffff0000f9ec3480 > > [ 2.039150] x25: ffff0000fa576410 x24: ffff0000fa502800 > > [ 2.044453] x23: 0000000000001388 x22: ffff0000fa635f80 > > [ 2.049755] x21: 0000000000000008 x20: 0000000000000000 > > [ 2.055058] x19: 0000000000000071 x18: 0000000000000001 > > [ 2.060360] x17: 0000000000000000 x16: 0000000000000000 > > [ 2.065662] x15: ffff0000facc8470 x14: ffffffffffffffff > > [ 2.070965] x13: 0000000000000001 x12: 00000000000000c0 > > [ 2.076267] x11: 0000000000000040 x10: 0000000000000070 > > [ 2.081569] x9 : ffffaec0063d24d8 x8 : ffff0000fa800270 > > [ 2.086872] x7 : 0000000000000000 x6 : 0000000000000011 > > [ 2.092174] x5 : ffff0000fa800248 x4 : ffff0000fa800270 > > [ 2.097476] x3 : ffff8000100c5000 x2 : 0000000000000000 > > [ 2.102778] x1 : 0000000000000000 x0 : 0000000000000000 > > [ 2.108081] Call trace: > > [ 2.110520] mtk_eint_set_debounce+0x48/0x1b8 > > [ 2.114870] mtk_gpio_set_config+0x5c/0x78 > > [ 2.118958] gpiod_set_config+0x5c/0x78 > > [ 2.122786] gpiod_set_debounce+0x18/0x28 > > [ 2.126789] gpio_keys_probe+0x50c/0x910 > > [ 2.130705] platform_drv_probe+0x54/0xa8 > > [ 2.134705] really_probe+0xe4/0x3b0 > > [ 2.138271] driver_probe_device+0x58/0xb8 > > [ 2.142358] device_driver_attach+0x74/0x80 > > [ 2.146532] __driver_attach+0x58/0xe0 > > [ 2.150274] bus_for_each_dev+0x70/0xc0 > > [ 2.154100] driver_attach+0x24/0x30 > > [ 2.157666] bus_add_driver+0x14c/0x1f0 > > [ 2.161493] driver_register+0x64/0x120 > > [ 2.165319] __platform_driver_register+0x48/0x58 > > [ 2.170017] gpio_keys_init+0x1c/0x28 > > [ 2.173672] do_one_initcall+0x54/0x1b4 > > [ 2.177499] kernel_init_freeable+0x1d0/0x238 > > [ 2.181848] kernel_init+0x14/0x118 > > [ 2.185328] ret_from_fork+0x10/0x34 > > [ 2.188899] Code: a9438ac1 12001266 f94006c3 121e766a (b9400421) > > [ 2.194991] ---[ end trace 168cf7b3324b6570 ]--- > > [ 2.199611] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b > > [ 2.207260] SMP: stopping secondary CPUs > > [ 2.211294] Kernel Offset: 0x2ebff4800000 from 0xffff800010000000 > > [ 2.217377] PHYS_OFFSET: 0xffffb50500000000 > > [ 2.221551] CPU features: 0x0240002,2188200c > > [ 2.225811] Memory Limit: none > > [ 2.228860] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- > > > > Fixes: 89132dd8ffd2 ("pinctrl: mediatek: extend eint build to pinctrl-mtk-common-v2.c") > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> > > --- > > A gentle ping for this fix. > > Thanks, > Enric > > > > > Changes in v2: > > - Free the resource when needed (Sean Wang) > > > > .../pinctrl/mediatek/pinctrl-mtk-common-v2.c | 27 ++++++++++++++----- > > 1 file changed, 20 insertions(+), 7 deletions(-) > > > > diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c > > index 2f3dfb56c3fa..4b532e6b9038 100644 > > --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c > > +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c > > @@ -355,6 +355,7 @@ int mtk_build_eint(struct mtk_pinctrl *hw, struct platform_device *pdev) > > { > > struct device_node *np = pdev->dev.of_node; > > struct resource *res; > > + int ret; > > > > if (!IS_ENABLED(CONFIG_EINT_MTK)) > > return 0; > > @@ -369,19 +370,26 @@ int mtk_build_eint(struct mtk_pinctrl *hw, struct platform_device *pdev) > > res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "eint"); > > if (!res) { > > dev_err(&pdev->dev, "Unable to get eint resource\n"); > > - return -ENODEV; > > + ret = -ENODEV; > > + goto err_free_eint; > > } > > > > hw->eint->base = devm_ioremap_resource(&pdev->dev, res); > > - if (IS_ERR(hw->eint->base)) > > - return PTR_ERR(hw->eint->base); > > + if (IS_ERR(hw->eint->base)) { > > + ret = PTR_ERR(hw->eint->base); > > + goto err_free_eint; > > + } > > > > hw->eint->irq = irq_of_parse_and_map(np, 0); > > - if (!hw->eint->irq) > > - return -EINVAL; > > + if (!hw->eint->irq) { > > + ret = -EINVAL; > > + goto err_free_eint; > > + } > > > > - if (!hw->soc->eint_hw) > > - return -ENODEV; > > + if (!hw->soc->eint_hw) { > > + ret = -ENODEV; > > + goto err_free_eint; > > + } > > > > hw->eint->dev = &pdev->dev; > > hw->eint->hw = hw->soc->eint_hw; > > @@ -389,6 +397,11 @@ int mtk_build_eint(struct mtk_pinctrl *hw, struct platform_device *pdev) > > hw->eint->gpio_xlate = &mtk_eint_xt; > > > > return mtk_eint_do_init(hw->eint); > > + > > +err_free_eint: > > + devm_kfree(hw->dev, hw->eint); > > + hw->eint = NULL; > > + return ret; > > } > > EXPORT_SYMBOL_GPL(mtk_build_eint); > > > >
On Sun, Sep 27, 2020 at 7:57 PM Sean Wang <sean.wang@kernel.org> wrote: > v2 seems the same with v1 or I was missing something. > > I just thought we call devm_ioremap_release to explicitly to free > resource when a certain failure occurs after > devm_ioremap_resource? What is the semantics around mtk_build_eint()? If it is called on the probe path no explicit free:ing is necessary: anytime probe() exits with an error code, any devm* resources will be free:ed. Yours, Linus Walleij
On Wed, Sep 30, 2020 at 1:47 AM Linus Walleij <linus.walleij@linaro.org> wrote: > > On Sun, Sep 27, 2020 at 7:57 PM Sean Wang <sean.wang@kernel.org> wrote: > > > v2 seems the same with v1 or I was missing something. > > > > I just thought we call devm_ioremap_release to explicitly to free > > resource when a certain failure occurs after > > devm_ioremap_resource? > > What is the semantics around mtk_build_eint()? > mtk_build_eint is to add external interrupt function to the corresponding bound pins. mtk pinctrl driver still can work (than means probe() successfully) to keep pinctrl functional even with there is an error in mtk_build_eint. So the patch is used to explicitly free those data on failure in mtk_build_eint to let unused data is being free:ed immediately. thanks, Sean > If it is called on the probe path no explicit free:ing is > necessary: anytime probe() exits with an error code, > any devm* resources will be free:ed. > > Yours, > Linus Walleij
On Wed, Sep 30, 2020 at 6:33 PM Sean Wang <sean.wang@kernel.org> wrote: > On Wed, Sep 30, 2020 at 1:47 AM Linus Walleij <linus.walleij@linaro.org> wrote: > > On Sun, Sep 27, 2020 at 7:57 PM Sean Wang <sean.wang@kernel.org> wrote: > > > > > v2 seems the same with v1 or I was missing something. > > > > > > I just thought we call devm_ioremap_release to explicitly to free > > > resource when a certain failure occurs after > > > devm_ioremap_resource? > > > > What is the semantics around mtk_build_eint()? > > > > mtk_build_eint is to add external interrupt function to the > corresponding bound pins. > mtk pinctrl driver still can work (than means probe() successfully) to > keep pinctrl functional even with there is an error in mtk_build_eint. > So the patch is used to explicitly free those data on failure in > mtk_build_eint to let unused data is being free:ed immediately. OK then we need a v3 of this that will call *release explicitly, indeed. Thanks Sean! Linus Walleij
Hi, On 1/10/20 9:58, Linus Walleij wrote: > On Wed, Sep 30, 2020 at 6:33 PM Sean Wang <sean.wang@kernel.org> wrote: >> On Wed, Sep 30, 2020 at 1:47 AM Linus Walleij <linus.walleij@linaro.org> wrote: >>> On Sun, Sep 27, 2020 at 7:57 PM Sean Wang <sean.wang@kernel.org> wrote: >>> >>>> v2 seems the same with v1 or I was missing something. >>>> >>>> I just thought we call devm_ioremap_release to explicitly to free >>>> resource when a certain failure occurs after >>>> devm_ioremap_resource? >>> >>> What is the semantics around mtk_build_eint()? >>> >> >> mtk_build_eint is to add external interrupt function to the >> corresponding bound pins. >> mtk pinctrl driver still can work (than means probe() successfully) to >> keep pinctrl functional even with there is an error in mtk_build_eint. >> So the patch is used to explicitly free those data on failure in >> mtk_build_eint to let unused data is being free:ed immediately. > > OK then we need a v3 of this that will call *release > explicitly, indeed. > Yes, don't really know what happened with v2. I'll send a v3 ASAP. > Thanks Sean! > Linus Walleij >
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c index 2f3dfb56c3fa..4b532e6b9038 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c @@ -355,6 +355,7 @@ int mtk_build_eint(struct mtk_pinctrl *hw, struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct resource *res; + int ret; if (!IS_ENABLED(CONFIG_EINT_MTK)) return 0; @@ -369,19 +370,26 @@ int mtk_build_eint(struct mtk_pinctrl *hw, struct platform_device *pdev) res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "eint"); if (!res) { dev_err(&pdev->dev, "Unable to get eint resource\n"); - return -ENODEV; + ret = -ENODEV; + goto err_free_eint; } hw->eint->base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(hw->eint->base)) - return PTR_ERR(hw->eint->base); + if (IS_ERR(hw->eint->base)) { + ret = PTR_ERR(hw->eint->base); + goto err_free_eint; + } hw->eint->irq = irq_of_parse_and_map(np, 0); - if (!hw->eint->irq) - return -EINVAL; + if (!hw->eint->irq) { + ret = -EINVAL; + goto err_free_eint; + } - if (!hw->soc->eint_hw) - return -ENODEV; + if (!hw->soc->eint_hw) { + ret = -ENODEV; + goto err_free_eint; + } hw->eint->dev = &pdev->dev; hw->eint->hw = hw->soc->eint_hw; @@ -389,6 +397,11 @@ int mtk_build_eint(struct mtk_pinctrl *hw, struct platform_device *pdev) hw->eint->gpio_xlate = &mtk_eint_xt; return mtk_eint_do_init(hw->eint); + +err_free_eint: + devm_kfree(hw->dev, hw->eint); + hw->eint = NULL; + return ret; } EXPORT_SYMBOL_GPL(mtk_build_eint);
The pinctrl driver can work without the EINT resource, but, if it is expected to have this resource but the mtk_build_eint() function fails after allocating their data (because can't get the resource or can't map the irq), the data is not freed and you end with a NULL pointer dereference. Fix this by freeing the data if mtk_build_eint() fails, so pinctrl still works and doesn't hang. This is noticeable after commit f97dbf48ca43 ("irqchip/mtk-sysirq: Convert to a platform driver") on MT8183 because, due this commit, the pinctrl driver fails to map the irq and spots the following bug: [ 1.947597] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 1.956404] Mem abort info: [ 1.959203] ESR = 0x96000004 [ 1.962259] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.967565] SET = 0, FnV = 0 [ 1.970613] EA = 0, S1PTW = 0 [ 1.973747] Data abort info: [ 1.976619] ISV = 0, ISS = 0x00000004 [ 1.980447] CM = 0, WnR = 0 [ 1.983410] [0000000000000004] user address but active_mm is swapper [ 1.989759] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 1.995322] Modules linked in: [ 1.998371] CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc1+ #44 [ 2.004715] Hardware name: MediaTek krane sku176 board (DT) [ 2.010280] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) [ 2.015850] pc : mtk_eint_set_debounce+0x48/0x1b8 [ 2.020546] lr : mtk_eint_set_debounce+0x34/0x1b8 [ 2.025239] sp : ffff80001008baa0 [ 2.028544] x29: ffff80001008baa0 x28: ffff0000ff7ff790 [ 2.033847] x27: ffff0000f9ec34b0 x26: ffff0000f9ec3480 [ 2.039150] x25: ffff0000fa576410 x24: ffff0000fa502800 [ 2.044453] x23: 0000000000001388 x22: ffff0000fa635f80 [ 2.049755] x21: 0000000000000008 x20: 0000000000000000 [ 2.055058] x19: 0000000000000071 x18: 0000000000000001 [ 2.060360] x17: 0000000000000000 x16: 0000000000000000 [ 2.065662] x15: ffff0000facc8470 x14: ffffffffffffffff [ 2.070965] x13: 0000000000000001 x12: 00000000000000c0 [ 2.076267] x11: 0000000000000040 x10: 0000000000000070 [ 2.081569] x9 : ffffaec0063d24d8 x8 : ffff0000fa800270 [ 2.086872] x7 : 0000000000000000 x6 : 0000000000000011 [ 2.092174] x5 : ffff0000fa800248 x4 : ffff0000fa800270 [ 2.097476] x3 : ffff8000100c5000 x2 : 0000000000000000 [ 2.102778] x1 : 0000000000000000 x0 : 0000000000000000 [ 2.108081] Call trace: [ 2.110520] mtk_eint_set_debounce+0x48/0x1b8 [ 2.114870] mtk_gpio_set_config+0x5c/0x78 [ 2.118958] gpiod_set_config+0x5c/0x78 [ 2.122786] gpiod_set_debounce+0x18/0x28 [ 2.126789] gpio_keys_probe+0x50c/0x910 [ 2.130705] platform_drv_probe+0x54/0xa8 [ 2.134705] really_probe+0xe4/0x3b0 [ 2.138271] driver_probe_device+0x58/0xb8 [ 2.142358] device_driver_attach+0x74/0x80 [ 2.146532] __driver_attach+0x58/0xe0 [ 2.150274] bus_for_each_dev+0x70/0xc0 [ 2.154100] driver_attach+0x24/0x30 [ 2.157666] bus_add_driver+0x14c/0x1f0 [ 2.161493] driver_register+0x64/0x120 [ 2.165319] __platform_driver_register+0x48/0x58 [ 2.170017] gpio_keys_init+0x1c/0x28 [ 2.173672] do_one_initcall+0x54/0x1b4 [ 2.177499] kernel_init_freeable+0x1d0/0x238 [ 2.181848] kernel_init+0x14/0x118 [ 2.185328] ret_from_fork+0x10/0x34 [ 2.188899] Code: a9438ac1 12001266 f94006c3 121e766a (b9400421) [ 2.194991] ---[ end trace 168cf7b3324b6570 ]--- [ 2.199611] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.207260] SMP: stopping secondary CPUs [ 2.211294] Kernel Offset: 0x2ebff4800000 from 0xffff800010000000 [ 2.217377] PHYS_OFFSET: 0xffffb50500000000 [ 2.221551] CPU features: 0x0240002,2188200c [ 2.225811] Memory Limit: none [ 2.228860] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- Fixes: 89132dd8ffd2 ("pinctrl: mediatek: extend eint build to pinctrl-mtk-common-v2.c") Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> --- Changes in v2: - Free the resource when needed (Sean Wang) .../pinctrl/mediatek/pinctrl-mtk-common-v2.c | 27 ++++++++++++++----- 1 file changed, 20 insertions(+), 7 deletions(-)