| Message ID | 20200927192912.46323-10-peron.clem@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add Allwinner H3/H5/H6/A64 HDMI audio | expand |
On Mon, Sep 28, 2020 at 3:29 AM Clément Péron <peron.clem@gmail.com> wrote: > > From: Jernej Skrabec <jernej.skrabec@siol.net> > > Add the I2S node used by the HDMI and a simple-soundcard to > link audio between HDMI and I2S. > > Note that the HDMI codec requires an inverted frame clock and > a fixed I2S width. As there is no such option for I2S we use > TDM property of the simple-soundcard to do that. > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > Signed-off-by: Marcus Cooper <codekipper@gmail.com> > Signed-off-by: Clément Péron <peron.clem@gmail.com> > --- > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 33 ++++++++++++++++++++ > 1 file changed, 33 insertions(+) > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > index 28c77d6872f6..a8853ee7885a 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > @@ -67,6 +67,25 @@ de: display-engine { > status = "disabled"; > }; > > + hdmi_sound: hdmi-sound { > + compatible = "simple-audio-card"; > + simple-audio-card,format = "i2s"; > + simple-audio-card,name = "sun50i-h6-hdmi"; > + simple-audio-card,mclk-fs = <128>; > + simple-audio-card,frame-inversion; > + status = "disabled"; > + > + simple-audio-card,codec { > + sound-dai = <&hdmi>; > + }; > + > + simple-audio-card,cpu { > + sound-dai = <&i2s1>; > + dai-tdm-slot-num = <2>; Doesn't this end up limiting the number of audio channels HDMI can carry? AFAICT the TDM properties are all optional, so just leave it out. Same goes for the other two patches. > + dai-tdm-slot-width = <32>; > + }; > + }; > + > osc24M: osc24M_clk { > #clock-cells = <0>; > compatible = "fixed-clock"; > @@ -609,6 +628,19 @@ mdio: mdio { > }; > }; > > + i2s1: i2s@5091000 { > + #sound-dai-cells = <0>; > + compatible = "allwinner,sun50i-h6-i2s"; > + reg = <0x05091000 0x1000>; > + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>; > + clock-names = "apb", "mod"; > + dmas = <&dma 4>, <&dma 4>; > + resets = <&ccu RST_BUS_I2S1>; > + dma-names = "rx", "tx"; > + status = "disabled"; > + }; > + > spdif: spdif@5093000 { > #sound-dai-cells = <0>; > compatible = "allwinner,sun50i-h6-spdif"; > @@ -739,6 +771,7 @@ ohci3: usb@5311400 { > }; > > hdmi: hdmi@6000000 { > + #sound-dai-cells = <0>; > compatible = "allwinner,sun50i-h6-dw-hdmi"; > reg = <0x06000000 0x10000>; > reg-io-width = <1>; The rest of the patch looks OK.
On Mon, Sep 28, 2020 at 1:32 PM Chen-Yu Tsai <wens@csie.org> wrote: > > On Mon, Sep 28, 2020 at 3:29 AM Clément Péron <peron.clem@gmail.com> wrote: > > > > From: Jernej Skrabec <jernej.skrabec@siol.net> > > > > Add the I2S node used by the HDMI and a simple-soundcard to > > link audio between HDMI and I2S. > > > > Note that the HDMI codec requires an inverted frame clock and > > a fixed I2S width. As there is no such option for I2S we use > > TDM property of the simple-soundcard to do that. > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > > Signed-off-by: Marcus Cooper <codekipper@gmail.com> > > Signed-off-by: Clément Péron <peron.clem@gmail.com> > > --- > > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 33 ++++++++++++++++++++ > > 1 file changed, 33 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > > index 28c77d6872f6..a8853ee7885a 100644 > > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > > @@ -67,6 +67,25 @@ de: display-engine { > > status = "disabled"; > > }; > > > > + hdmi_sound: hdmi-sound { > > + compatible = "simple-audio-card"; > > + simple-audio-card,format = "i2s"; > > + simple-audio-card,name = "sun50i-h6-hdmi"; > > + simple-audio-card,mclk-fs = <128>; > > + simple-audio-card,frame-inversion; > > + status = "disabled"; > > + > > + simple-audio-card,codec { > > + sound-dai = <&hdmi>; > > + }; > > + > > + simple-audio-card,cpu { > > + sound-dai = <&i2s1>; > > + dai-tdm-slot-num = <2>; > > Doesn't this end up limiting the number of audio channels HDMI can carry? > AFAICT the TDM properties are all optional, so just leave it out. > > Same goes for the other two patches. > > > + dai-tdm-slot-width = <32>; > > + }; > > + }; > > + > > osc24M: osc24M_clk { > > #clock-cells = <0>; > > compatible = "fixed-clock"; > > @@ -609,6 +628,19 @@ mdio: mdio { > > }; > > }; > > > > + i2s1: i2s@5091000 { > > + #sound-dai-cells = <0>; > > + compatible = "allwinner,sun50i-h6-i2s"; > > + reg = <0x05091000 0x1000>; > > + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>; > > + clock-names = "apb", "mod"; > > + dmas = <&dma 4>, <&dma 4>; > > + resets = <&ccu RST_BUS_I2S1>; > > + dma-names = "rx", "tx"; Sorry, missed this one. Given that usage for this interface is transmit only, and there is no RX DRQ number assigned to it, you should drop the RX DMA number and name. > > + status = "disabled"; > > + }; > > + > > spdif: spdif@5093000 { > > #sound-dai-cells = <0>; > > compatible = "allwinner,sun50i-h6-spdif"; > > @@ -739,6 +771,7 @@ ohci3: usb@5311400 { > > }; > > > > hdmi: hdmi@6000000 { > > + #sound-dai-cells = <0>; > > compatible = "allwinner,sun50i-h6-dw-hdmi"; > > reg = <0x06000000 0x10000>; > > reg-io-width = <1>; > > The rest of the patch looks OK.
Hi Chen-Yu, On Mon, 28 Sep 2020 at 07:42, Chen-Yu Tsai <wens@csie.org> wrote: > > On Mon, Sep 28, 2020 at 1:32 PM Chen-Yu Tsai <wens@csie.org> wrote: > > > > On Mon, Sep 28, 2020 at 3:29 AM Clément Péron <peron.clem@gmail.com> wrote: > > > > > > From: Jernej Skrabec <jernej.skrabec@siol.net> > > > > > > Add the I2S node used by the HDMI and a simple-soundcard to > > > link audio between HDMI and I2S. > > > > > > Note that the HDMI codec requires an inverted frame clock and > > > a fixed I2S width. As there is no such option for I2S we use > > > TDM property of the simple-soundcard to do that. > > > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > > > Signed-off-by: Marcus Cooper <codekipper@gmail.com> > > > Signed-off-by: Clément Péron <peron.clem@gmail.com> > > > --- > > > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 33 ++++++++++++++++++++ > > > 1 file changed, 33 insertions(+) > > > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > > > index 28c77d6872f6..a8853ee7885a 100644 > > > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > > > @@ -67,6 +67,25 @@ de: display-engine { > > > status = "disabled"; > > > }; > > > > > > + hdmi_sound: hdmi-sound { > > > + compatible = "simple-audio-card"; > > > + simple-audio-card,format = "i2s"; > > > + simple-audio-card,name = "sun50i-h6-hdmi"; > > > + simple-audio-card,mclk-fs = <128>; > > > + simple-audio-card,frame-inversion; > > > + status = "disabled"; > > > + > > > + simple-audio-card,codec { > > > + sound-dai = <&hdmi>; > > > + }; > > > + > > > + simple-audio-card,cpu { > > > + sound-dai = <&i2s1>; > > > + dai-tdm-slot-num = <2>; > > > > Doesn't this end up limiting the number of audio channels HDMI can carry? > > AFAICT the TDM properties are all optional, so just leave it out. > > > > Same goes for the other two patches. > > > > > + dai-tdm-slot-width = <32>; > > > + }; > > > + }; > > > + > > > osc24M: osc24M_clk { > > > #clock-cells = <0>; > > > compatible = "fixed-clock"; > > > @@ -609,6 +628,19 @@ mdio: mdio { > > > }; > > > }; > > > > > > + i2s1: i2s@5091000 { > > > + #sound-dai-cells = <0>; > > > + compatible = "allwinner,sun50i-h6-i2s"; > > > + reg = <0x05091000 0x1000>; > > > + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; > > > + clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>; > > > + clock-names = "apb", "mod"; > > > + dmas = <&dma 4>, <&dma 4>; > > > + resets = <&ccu RST_BUS_I2S1>; > > > + dma-names = "rx", "tx"; > > Sorry, missed this one. > > Given that usage for this interface is transmit only, and there is no > RX DRQ number assigned to it, you should drop the RX DMA number and name. Indeed if there is no DRQ number assigned we shouldn't have it in the device-tree but Samuel told me that the `make dtbs_check` reports: i2s@1c22800: dma-names:0: 'rx' was expected i2s@1c22800: dma-names: ['tx'] is too short i2s@1c22800: dmas: [[28, 27]] is too short Should I fix the YAML so? Regards, Clement > > > > + status = "disabled"; > > > + }; > > > + > > > spdif: spdif@5093000 { > > > #sound-dai-cells = <0>; > > > compatible = "allwinner,sun50i-h6-spdif"; > > > @@ -739,6 +771,7 @@ ohci3: usb@5311400 { > > > }; > > > > > > hdmi: hdmi@6000000 { > > > + #sound-dai-cells = <0>; > > > compatible = "allwinner,sun50i-h6-dw-hdmi"; > > > reg = <0x06000000 0x10000>; > > > reg-io-width = <1>; > > > > The rest of the patch looks OK.
On Fri, Oct 02, 2020 at 06:01:21PM +0200, Clément Péron wrote: > Hi Chen-Yu, > > On Mon, 28 Sep 2020 at 07:42, Chen-Yu Tsai <wens@csie.org> wrote: > > > > On Mon, Sep 28, 2020 at 1:32 PM Chen-Yu Tsai <wens@csie.org> wrote: > > > > > > On Mon, Sep 28, 2020 at 3:29 AM Clément Péron <peron.clem@gmail.com> wrote: > > > > > > > > From: Jernej Skrabec <jernej.skrabec@siol.net> > > > > > > > > Add the I2S node used by the HDMI and a simple-soundcard to > > > > link audio between HDMI and I2S. > > > > > > > > Note that the HDMI codec requires an inverted frame clock and > > > > a fixed I2S width. As there is no such option for I2S we use > > > > TDM property of the simple-soundcard to do that. > > > > > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > > > > Signed-off-by: Marcus Cooper <codekipper@gmail.com> > > > > Signed-off-by: Clément Péron <peron.clem@gmail.com> > > > > --- > > > > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 33 ++++++++++++++++++++ > > > > 1 file changed, 33 insertions(+) > > > > > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > > > > index 28c77d6872f6..a8853ee7885a 100644 > > > > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > > > > @@ -67,6 +67,25 @@ de: display-engine { > > > > status = "disabled"; > > > > }; > > > > > > > > + hdmi_sound: hdmi-sound { > > > > + compatible = "simple-audio-card"; > > > > + simple-audio-card,format = "i2s"; > > > > + simple-audio-card,name = "sun50i-h6-hdmi"; > > > > + simple-audio-card,mclk-fs = <128>; > > > > + simple-audio-card,frame-inversion; > > > > + status = "disabled"; > > > > + > > > > + simple-audio-card,codec { > > > > + sound-dai = <&hdmi>; > > > > + }; > > > > + > > > > + simple-audio-card,cpu { > > > > + sound-dai = <&i2s1>; > > > > + dai-tdm-slot-num = <2>; > > > > > > Doesn't this end up limiting the number of audio channels HDMI can carry? > > > AFAICT the TDM properties are all optional, so just leave it out. > > > > > > Same goes for the other two patches. > > > > > > > + dai-tdm-slot-width = <32>; > > > > + }; > > > > + }; > > > > + > > > > osc24M: osc24M_clk { > > > > #clock-cells = <0>; > > > > compatible = "fixed-clock"; > > > > @@ -609,6 +628,19 @@ mdio: mdio { > > > > }; > > > > }; > > > > > > > > + i2s1: i2s@5091000 { > > > > + #sound-dai-cells = <0>; > > > > + compatible = "allwinner,sun50i-h6-i2s"; > > > > + reg = <0x05091000 0x1000>; > > > > + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; > > > > + clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>; > > > > + clock-names = "apb", "mod"; > > > > + dmas = <&dma 4>, <&dma 4>; > > > > + resets = <&ccu RST_BUS_I2S1>; > > > > + dma-names = "rx", "tx"; > > > > Sorry, missed this one. > > > > Given that usage for this interface is transmit only, and there is no > > RX DRQ number assigned to it, you should drop the RX DMA number and name. > > Indeed if there is no DRQ number assigned we shouldn't have it in the > device-tree > > but Samuel told me that the `make dtbs_check` reports: > > i2s@1c22800: dma-names:0: 'rx' was expected > i2s@1c22800: dma-names: ['tx'] is too short > i2s@1c22800: dmas: [[28, 27]] is too short > > Should I fix the YAML so? Yep :) Maxime
Hi, On Fri, 2 Oct 2020 at 18:24, Maxime Ripard <maxime@cerno.tech> wrote: > > On Fri, Oct 02, 2020 at 06:01:21PM +0200, Clément Péron wrote: > > Hi Chen-Yu, > > > > On Mon, 28 Sep 2020 at 07:42, Chen-Yu Tsai <wens@csie.org> wrote: > > > > > > On Mon, Sep 28, 2020 at 1:32 PM Chen-Yu Tsai <wens@csie.org> wrote: > > > > > > > > On Mon, Sep 28, 2020 at 3:29 AM Clément Péron <peron.clem@gmail.com> wrote: > > > > > > > > > > From: Jernej Skrabec <jernej.skrabec@siol.net> > > > > > > > > > > Add the I2S node used by the HDMI and a simple-soundcard to > > > > > link audio between HDMI and I2S. > > > > > > > > > > Note that the HDMI codec requires an inverted frame clock and > > > > > a fixed I2S width. As there is no such option for I2S we use > > > > > TDM property of the simple-soundcard to do that. > > > > > > > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> > > > > > Signed-off-by: Marcus Cooper <codekipper@gmail.com> > > > > > Signed-off-by: Clément Péron <peron.clem@gmail.com> > > > > > --- > > > > > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 33 ++++++++++++++++++++ > > > > > 1 file changed, 33 insertions(+) > > > > > > > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > > > > > index 28c77d6872f6..a8853ee7885a 100644 > > > > > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > > > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > > > > > @@ -67,6 +67,25 @@ de: display-engine { > > > > > status = "disabled"; > > > > > }; > > > > > > > > > > + hdmi_sound: hdmi-sound { > > > > > + compatible = "simple-audio-card"; > > > > > + simple-audio-card,format = "i2s"; > > > > > + simple-audio-card,name = "sun50i-h6-hdmi"; > > > > > + simple-audio-card,mclk-fs = <128>; > > > > > + simple-audio-card,frame-inversion; > > > > > + status = "disabled"; > > > > > + > > > > > + simple-audio-card,codec { > > > > > + sound-dai = <&hdmi>; > > > > > + }; > > > > > + > > > > > + simple-audio-card,cpu { > > > > > + sound-dai = <&i2s1>; > > > > > + dai-tdm-slot-num = <2>; > > > > > > > > Doesn't this end up limiting the number of audio channels HDMI can carry? > > > > AFAICT the TDM properties are all optional, so just leave it out. > > > > > > > > Same goes for the other two patches. > > > > > > > > > + dai-tdm-slot-width = <32>; > > > > > + }; > > > > > + }; > > > > > + > > > > > osc24M: osc24M_clk { > > > > > #clock-cells = <0>; > > > > > compatible = "fixed-clock"; > > > > > @@ -609,6 +628,19 @@ mdio: mdio { > > > > > }; > > > > > }; > > > > > > > > > > + i2s1: i2s@5091000 { > > > > > + #sound-dai-cells = <0>; > > > > > + compatible = "allwinner,sun50i-h6-i2s"; > > > > > + reg = <0x05091000 0x1000>; > > > > > + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; > > > > > + clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>; > > > > > + clock-names = "apb", "mod"; > > > > > + dmas = <&dma 4>, <&dma 4>; > > > > > + resets = <&ccu RST_BUS_I2S1>; > > > > > + dma-names = "rx", "tx"; > > > > > > Sorry, missed this one. > > > > > > Given that usage for this interface is transmt only, and there is no > > > RX DRQ number assigned to it, you should drop the RX DMA number and name. > > > > Indeed if there is no DRQ number assigned we shouldn't have it in the > > device-tree After reviewing the H6 User Manual it seems to be assigned : page 269 3.10.3.3 DRQ TYPE port 4 => I2S/PCM1-RX / I2S/PCM1-TX Same for A64 But indeed it's not mapped for H5. I will fix the yaml for H3/H5 but not for A64/H6. Regards, Clement > > > > but Samuel told me that the `make dtbs_check` reports: > > > > i2s@1c22800: dma-names:0: 'rx' was expected > > i2s@1c22800: dma-names: ['tx'] is too short > > i2s@1c22800: dmas: [[28, 27]] is too short > > > > Should I fix the YAML so? > > Yep :) > > Maxime
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 28c77d6872f6..a8853ee7885a 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -67,6 +67,25 @@ de: display-engine { status = "disabled"; }; + hdmi_sound: hdmi-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "sun50i-h6-hdmi"; + simple-audio-card,mclk-fs = <128>; + simple-audio-card,frame-inversion; + status = "disabled"; + + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <32>; + }; + }; + osc24M: osc24M_clk { #clock-cells = <0>; compatible = "fixed-clock"; @@ -609,6 +628,19 @@ mdio: mdio { }; }; + i2s1: i2s@5091000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun50i-h6-i2s"; + reg = <0x05091000 0x1000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>; + clock-names = "apb", "mod"; + dmas = <&dma 4>, <&dma 4>; + resets = <&ccu RST_BUS_I2S1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + spdif: spdif@5093000 { #sound-dai-cells = <0>; compatible = "allwinner,sun50i-h6-spdif"; @@ -739,6 +771,7 @@ ohci3: usb@5311400 { }; hdmi: hdmi@6000000 { + #sound-dai-cells = <0>; compatible = "allwinner,sun50i-h6-dw-hdmi"; reg = <0x06000000 0x10000>; reg-io-width = <1>;