Message ID | 1600480955-16827-2-git-send-email-bbhatt@codeaurora.org (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Bug fixes and improvements for MHI power operations | expand |
On Fri, Sep 18, 2020 at 07:02:26PM -0700, Bhaumik Bhatt wrote: > mhi_fw_load_sbl() function is currently used to transfer SBL or EDL > images over BHI (Boot Host Interface). Same goes with mhi_fw_load_amss() > which uses BHIe. However, the contents of these functions do not > indicate support for a specific set of images. Since these can be used > for any image download over BHI or BHIe, rename them based on the > protocol used. > > Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> > --- > drivers/bus/mhi/core/boot.c | 16 ++++++++-------- > 1 file changed, 8 insertions(+), 8 deletions(-) > > diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c > index 24422f5..92b8dd3 100644 > --- a/drivers/bus/mhi/core/boot.c > +++ b/drivers/bus/mhi/core/boot.c > @@ -171,7 +171,7 @@ int mhi_download_rddm_img(struct mhi_controller *mhi_cntrl, bool in_panic) > } > EXPORT_SYMBOL_GPL(mhi_download_rddm_img); > > -static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl, > +static int mhi_fw_load_bhie(struct mhi_controller *mhi_cntrl, > const struct mhi_buf *mhi_buf) > { > void __iomem *base = mhi_cntrl->bhie; > @@ -187,7 +187,7 @@ static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl, > } > > sequence_id = MHI_RANDOM_U32_NONZERO(BHIE_TXVECSTATUS_SEQNUM_BMSK); > - dev_dbg(dev, "Starting AMSS download via BHIe. Sequence ID:%u\n", > + dev_dbg(dev, "Starting image download via BHIe. Sequence ID:%u\n", > sequence_id); > mhi_write_reg(mhi_cntrl, base, BHIE_TXVECADDR_HIGH_OFFS, > upper_32_bits(mhi_buf->dma_addr)); > @@ -218,7 +218,7 @@ static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl, > return (!ret) ? -ETIMEDOUT : 0; > } > > -static int mhi_fw_load_sbl(struct mhi_controller *mhi_cntrl, > +static int mhi_fw_load_bhi(struct mhi_controller *mhi_cntrl, > dma_addr_t dma_addr, > size_t size) > { > @@ -245,7 +245,7 @@ static int mhi_fw_load_sbl(struct mhi_controller *mhi_cntrl, > } > > session_id = MHI_RANDOM_U32_NONZERO(BHI_TXDB_SEQNUM_BMSK); > - dev_dbg(dev, "Starting SBL download via BHI. Session ID:%u\n", > + dev_dbg(dev, "Starting image download via BHI. Session ID:%u\n", > session_id); > mhi_write_reg(mhi_cntrl, base, BHI_STATUS, 0); > mhi_write_reg(mhi_cntrl, base, BHI_IMGADDR_HIGH, > @@ -446,9 +446,9 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl) > return; > } > > - /* Download SBL image */ > + /* Download SBL or EDL image using BHI */ You are mentioning "image" in the debug print but "SBL/EDL" here and below. Please use "image" for consistency. Thanks, Mani > memcpy(buf, firmware->data, size); > - ret = mhi_fw_load_sbl(mhi_cntrl, dma_addr, size); > + ret = mhi_fw_load_bhi(mhi_cntrl, dma_addr, size); > mhi_free_coherent(mhi_cntrl, size, buf, dma_addr); > > if (!mhi_cntrl->fbc_download || ret || mhi_cntrl->ee == MHI_EE_EDL) > @@ -456,7 +456,7 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl) > > /* Error or in EDL mode, we're done */ > if (ret) { > - dev_err(dev, "MHI did not load SBL, ret:%d\n", ret); > + dev_err(dev, "MHI did not load SBL/EDL image, ret:%d\n", ret); > return; > } > > @@ -506,7 +506,7 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl) > > /* Start full firmware image download */ > image_info = mhi_cntrl->fbc_image; > - ret = mhi_fw_load_amss(mhi_cntrl, > + ret = mhi_fw_load_bhie(mhi_cntrl, > /* Vector table is the last entry */ > &image_info->mhi_buf[image_info->entries - 1]); > if (ret) > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project >
diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c index 24422f5..92b8dd3 100644 --- a/drivers/bus/mhi/core/boot.c +++ b/drivers/bus/mhi/core/boot.c @@ -171,7 +171,7 @@ int mhi_download_rddm_img(struct mhi_controller *mhi_cntrl, bool in_panic) } EXPORT_SYMBOL_GPL(mhi_download_rddm_img); -static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl, +static int mhi_fw_load_bhie(struct mhi_controller *mhi_cntrl, const struct mhi_buf *mhi_buf) { void __iomem *base = mhi_cntrl->bhie; @@ -187,7 +187,7 @@ static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl, } sequence_id = MHI_RANDOM_U32_NONZERO(BHIE_TXVECSTATUS_SEQNUM_BMSK); - dev_dbg(dev, "Starting AMSS download via BHIe. Sequence ID:%u\n", + dev_dbg(dev, "Starting image download via BHIe. Sequence ID:%u\n", sequence_id); mhi_write_reg(mhi_cntrl, base, BHIE_TXVECADDR_HIGH_OFFS, upper_32_bits(mhi_buf->dma_addr)); @@ -218,7 +218,7 @@ static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl, return (!ret) ? -ETIMEDOUT : 0; } -static int mhi_fw_load_sbl(struct mhi_controller *mhi_cntrl, +static int mhi_fw_load_bhi(struct mhi_controller *mhi_cntrl, dma_addr_t dma_addr, size_t size) { @@ -245,7 +245,7 @@ static int mhi_fw_load_sbl(struct mhi_controller *mhi_cntrl, } session_id = MHI_RANDOM_U32_NONZERO(BHI_TXDB_SEQNUM_BMSK); - dev_dbg(dev, "Starting SBL download via BHI. Session ID:%u\n", + dev_dbg(dev, "Starting image download via BHI. Session ID:%u\n", session_id); mhi_write_reg(mhi_cntrl, base, BHI_STATUS, 0); mhi_write_reg(mhi_cntrl, base, BHI_IMGADDR_HIGH, @@ -446,9 +446,9 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl) return; } - /* Download SBL image */ + /* Download SBL or EDL image using BHI */ memcpy(buf, firmware->data, size); - ret = mhi_fw_load_sbl(mhi_cntrl, dma_addr, size); + ret = mhi_fw_load_bhi(mhi_cntrl, dma_addr, size); mhi_free_coherent(mhi_cntrl, size, buf, dma_addr); if (!mhi_cntrl->fbc_download || ret || mhi_cntrl->ee == MHI_EE_EDL) @@ -456,7 +456,7 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl) /* Error or in EDL mode, we're done */ if (ret) { - dev_err(dev, "MHI did not load SBL, ret:%d\n", ret); + dev_err(dev, "MHI did not load SBL/EDL image, ret:%d\n", ret); return; } @@ -506,7 +506,7 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl) /* Start full firmware image download */ image_info = mhi_cntrl->fbc_image; - ret = mhi_fw_load_amss(mhi_cntrl, + ret = mhi_fw_load_bhie(mhi_cntrl, /* Vector table is the last entry */ &image_info->mhi_buf[image_info->entries - 1]); if (ret)
mhi_fw_load_sbl() function is currently used to transfer SBL or EDL images over BHI (Boot Host Interface). Same goes with mhi_fw_load_amss() which uses BHIe. However, the contents of these functions do not indicate support for a specific set of images. Since these can be used for any image download over BHI or BHIe, rename them based on the protocol used. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> --- drivers/bus/mhi/core/boot.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)