| Message ID | bd71ed260efd162d25e0491988d61fcf1e589bc0.1602318869.git.chunfeng.yun@mediatek.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [v2,1/4] dt-bindings: usb: convert usb-device.txt to YAML schema | expand |
On Sat, Oct 10, 2020 at 04:43:12PM +0800, Chunfeng Yun wrote: > Add some optional properties which are needed for hard wired devices > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > --- > v2 changes suggested by Rob: > 1. modify pattern to support any USB class > 2. refer to usb-device.yaml instead of usb-device.txt > --- > .../devicetree/bindings/usb/usb-hcd.yaml | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) You can fold this into the first patch. While not explicit before, it was implied. Rob > > diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml > index 7263b7f2b510..42b295afdf32 100644 > --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml > +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml > @@ -22,9 +22,28 @@ properties: > description: > Name specifier for the USB PHY > > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > +patternProperties: > + "^[a-f]+@[0-9a-f]+$": Just define the unit-address here: "@[0-9a-f]+$" > + type: object > + $ref: /usb/usb-device.yaml > + description: The hard wired USB devices Need to also define 'reg' and 'compatible' here. > + > examples: > - | > usb { > phys = <&usb2_phy1>, <&usb3_phy1>; > phy-names = "usb"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + hub@1 { > + compatible = "usb5e3,610"; > + reg = <1>; > + }; > }; > -- > 2.18.0
On Mon, 2020-10-12 at 11:00 -0500, Rob Herring wrote: > On Sat, Oct 10, 2020 at 04:43:12PM +0800, Chunfeng Yun wrote: > > Add some optional properties which are needed for hard wired devices > > > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > > --- > > v2 changes suggested by Rob: > > 1. modify pattern to support any USB class > > 2. refer to usb-device.yaml instead of usb-device.txt > > --- > > .../devicetree/bindings/usb/usb-hcd.yaml | 19 +++++++++++++++++++ > > 1 file changed, 19 insertions(+) > > You can fold this into the first patch. While not explicit before, it > was implied. Ok > > Rob > > > > > diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml > > index 7263b7f2b510..42b295afdf32 100644 > > --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml > > +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml > > @@ -22,9 +22,28 @@ properties: > > description: > > Name specifier for the USB PHY > > > > + "#address-cells": > > + const: 1 > > + > > + "#size-cells": > > + const: 0 > > + > > +patternProperties: > > + "^[a-f]+@[0-9a-f]+$": > > Just define the unit-address here: "@[0-9a-f]+$" When I define it as "@[0-9a-f]+$", there is error: "usb-hcd.example.dt.yaml: usb: hub@1: 'compatile' is a required property" > > + type: object > > + $ref: /usb/usb-device.yaml > > + description: The hard wired USB devices > > Need to also define 'reg' and 'compatible' here. 'reg' and 'compatible' are already defined in usb-device.yaml > > > + > > examples: > > - | > > usb { > > phys = <&usb2_phy1>, <&usb3_phy1>; > > phy-names = "usb"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + hub@1 { > > + compatible = "usb5e3,610"; > > + reg = <1>; > > + }; > > }; > > -- > > 2.18.0
diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml index 7263b7f2b510..42b295afdf32 100644 --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml @@ -22,9 +22,28 @@ properties: description: Name specifier for the USB PHY + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^[a-f]+@[0-9a-f]+$": + type: object + $ref: /usb/usb-device.yaml + description: The hard wired USB devices + examples: - | usb { phys = <&usb2_phy1>, <&usb3_phy1>; phy-names = "usb"; + #address-cells = <1>; + #size-cells = <0>; + + hub@1 { + compatible = "usb5e3,610"; + reg = <1>; + }; };
Add some optional properties which are needed for hard wired devices Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- v2 changes suggested by Rob: 1. modify pattern to support any USB class 2. refer to usb-device.yaml instead of usb-device.txt --- .../devicetree/bindings/usb/usb-hcd.yaml | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)