diff mbox

[v5,10/22] gpio/omap: use level/edge detect reg offsets

Message ID 1312455893-14922-11-git-send-email-tarun.kanti@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Tarun Kanti DebBarma Aug. 4, 2011, 11:04 a.m. UTC
By adding level and edge detection register offsets and then initializing them
correctly according to OMAP versions during device registrations we can now remove
lot of revision checks in these functions.

Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Signed-off-by: Charulatha V <charu@ti.com>
---
 arch/arm/mach-omap2/gpio.c             |    8 ++
 arch/arm/plat-omap/include/plat/gpio.h |    4 +
 drivers/gpio/gpio-omap.c               |  118 ++++++++++----------------------
 3 files changed, 48 insertions(+), 82 deletions(-)

Comments

Santosh Shilimkar Aug. 23, 2011, 1:08 p.m. UTC | #1
On Thursday 04 August 2011 04:34 PM, Tarun Kanti DebBarma wrote:
> By adding level and edge detection register offsets and then initializing them
> correctly according to OMAP versions during device registrations we can now remove
> lot of revision checks in these functions.
>
> Signed-off-by: Tarun Kanti DebBarma<tarun.kanti@ti.com>
> Signed-off-by: Charulatha V<charu@ti.com>
> ---
Looks good.

Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

Regards
Santosh
diff mbox

Patch

diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index fd05cea..8745c3a 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -109,6 +109,10 @@  static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 		pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN;
 		pdata->regs->ctrl = OMAP24XX_GPIO_CTRL;
 		pdata->regs->wkup_status = OMAP24XX_GPIO_WAKE_EN;
+		pdata->regs->leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0;
+		pdata->regs->leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1;
+		pdata->regs->risingdetect = OMAP24XX_GPIO_RISINGDETECT;
+		pdata->regs->fallingdetect = OMAP24XX_GPIO_FALLINGDETECT;
 		break;
 	case 2:
 		pdata->bank_type = METHOD_GPIO_44XX;
@@ -127,6 +131,10 @@  static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 		pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE;
 		pdata->regs->ctrl = OMAP4_GPIO_CTRL;
 		pdata->regs->wkup_status = OMAP4_GPIO_IRQWAKEN0;
+		pdata->regs->leveldetect0 = OMAP4_GPIO_LEVELDETECT0;
+		pdata->regs->leveldetect1 = OMAP4_GPIO_LEVELDETECT1;
+		pdata->regs->risingdetect = OMAP4_GPIO_RISINGDETECT;
+		pdata->regs->fallingdetect = OMAP4_GPIO_FALLINGDETECT;
 		break;
 	default:
 		WARN(1, "Invalid gpio bank_type\n");
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index 817997d..7d12fe8 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -190,6 +190,10 @@  struct omap_gpio_reg_offs {
 	u16 debounce_en;
 	u16 ctrl;
 	u16 wkup_status;
+	u16 leveldetect0;
+	u16 leveldetect1;
+	u16 risingdetect;
+	u16 fallingdetect;
 
 	bool irqenable_inv;
 };
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index e841ac1..be561be 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -257,15 +257,9 @@  static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 			bank->enabled_non_wakeup_gpios &= ~gpio_bit;
 	}
 
-	if (cpu_is_omap44xx()) {
-		bank->level_mask =
-			__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) |
-			__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1);
-	} else {
-		bank->level_mask =
-			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
-			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
-	}
+	bank->level_mask =
+		__raw_readl(bank->base + bank->regs->leveldetect0) |
+		__raw_readl(bank->base + bank->regs->leveldetect1);
 }
 #endif
 
@@ -405,12 +399,12 @@  static int gpio_irq_type(struct irq_data *d, unsigned type)
 	if (type & ~IRQ_TYPE_SENSE_MASK)
 		return -EINVAL;
 
-	/* OMAP1 allows only only edge triggering */
-	if (!cpu_class_is_omap2()
-			&& (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
+	bank = irq_data_get_irq_chip_data(d);
+
+	if (!bank->regs->leveldetect0 &&
+		(type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
 		return -EINVAL;
 
-	bank = irq_data_get_irq_chip_data(d);
 	spin_lock_irqsave(&bank->lock, flags);
 	retval = _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), type);
 	spin_unlock_irqrestore(&bank->lock, flags);
@@ -658,9 +652,8 @@  static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 		if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO))
 			isr &= 0x0000ffff;
 
-		if (cpu_class_is_omap2()) {
+		if (bank->level_mask)
 			level_mask = bank->level_mask & enabled;
-		}
 
 		/* clear edge sensitive interrupts before handler(s) are
 		called so that we don't miss any interrupt occurred while
@@ -1246,40 +1239,18 @@  void omap2_gpio_prepare_for_idle(int off_mode)
 		if (!(bank->enabled_non_wakeup_gpios))
 			goto save_gpio_ctx;
 
-		if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-			bank->saved_datain = __raw_readl(bank->base +
-					OMAP24XX_GPIO_DATAIN);
-			l1 = __raw_readl(bank->base +
-					OMAP24XX_GPIO_FALLINGDETECT);
-			l2 = __raw_readl(bank->base +
-					OMAP24XX_GPIO_RISINGDETECT);
-		}
-
-		if (cpu_is_omap44xx()) {
-			bank->saved_datain = __raw_readl(bank->base +
-						OMAP4_GPIO_DATAIN);
-			l1 = __raw_readl(bank->base +
-						OMAP4_GPIO_FALLINGDETECT);
-			l2 = __raw_readl(bank->base +
-						OMAP4_GPIO_RISINGDETECT);
-		}
+		bank->saved_datain = __raw_readl(bank->base +
+							bank->regs->datain);
+		l1 = __raw_readl(bank->base + bank->regs->fallingdetect);
+		l2 = __raw_readl(bank->base + bank->regs->risingdetect);
 
 		bank->saved_fallingdetect = l1;
 		bank->saved_risingdetect = l2;
 		l1 &= ~bank->enabled_non_wakeup_gpios;
 		l2 &= ~bank->enabled_non_wakeup_gpios;
 
-		if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-			__raw_writel(l1, bank->base +
-					OMAP24XX_GPIO_FALLINGDETECT);
-			__raw_writel(l2, bank->base +
-					OMAP24XX_GPIO_RISINGDETECT);
-		}
-
-		if (cpu_is_omap44xx()) {
-			__raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
-			__raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
-		}
+		__raw_writel(l1, bank->base + bank->regs->fallingdetect);
+		__raw_writel(l2, bank->base + bank->regs->risingdetect);
 
 save_gpio_ctx:
 		if (bank->get_context_loss_count)
@@ -1316,21 +1287,11 @@  void omap2_gpio_resume_after_idle(void)
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
 
-		if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-			__raw_writel(bank->saved_fallingdetect,
-				 bank->base + OMAP24XX_GPIO_FALLINGDETECT);
-			__raw_writel(bank->saved_risingdetect,
-				 bank->base + OMAP24XX_GPIO_RISINGDETECT);
-			l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
-		}
-
-		if (cpu_is_omap44xx()) {
-			__raw_writel(bank->saved_fallingdetect,
-				 bank->base + OMAP4_GPIO_FALLINGDETECT);
-			__raw_writel(bank->saved_risingdetect,
-				 bank->base + OMAP4_GPIO_RISINGDETECT);
-			l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
-		}
+		__raw_writel(bank->saved_fallingdetect,
+				bank->base + bank->regs->fallingdetect);
+		__raw_writel(bank->saved_risingdetect,
+				bank->base + bank->regs->risingdetect);
+		l = __raw_readl(bank->base + bank->regs->datain);
 
 		/* Check if any of the non-wakeup interrupt GPIOs have changed
 		 * state.  If so, generate an IRQ by software.  This is
@@ -1358,35 +1319,28 @@  void omap2_gpio_resume_after_idle(void)
 		if (gen) {
 			u32 old0, old1;
 
+			old0 = __raw_readl(bank->base +
+						bank->regs->leveldetect0);
+			old1 = __raw_readl(bank->base +
+						bank->regs->leveldetect1);
+
+			__raw_writel(old0, bank->base +
+						bank->regs->leveldetect0);
+			__raw_writel(old1, bank->base +
+						bank->regs->leveldetect1);
 			if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-				old0 = __raw_readl(bank->base +
-					OMAP24XX_GPIO_LEVELDETECT0);
-				old1 = __raw_readl(bank->base +
-					OMAP24XX_GPIO_LEVELDETECT1);
-				__raw_writel(old0 | gen, bank->base +
-					OMAP24XX_GPIO_LEVELDETECT0);
-				__raw_writel(old1 | gen, bank->base +
-					OMAP24XX_GPIO_LEVELDETECT1);
-				__raw_writel(old0, bank->base +
-					OMAP24XX_GPIO_LEVELDETECT0);
-				__raw_writel(old1, bank->base +
-					OMAP24XX_GPIO_LEVELDETECT1);
+				old0 |= gen;
+				old1 |= gen;
 			}
 
 			if (cpu_is_omap44xx()) {
-				old0 = __raw_readl(bank->base +
-						OMAP4_GPIO_LEVELDETECT0);
-				old1 = __raw_readl(bank->base +
-						OMAP4_GPIO_LEVELDETECT1);
-				__raw_writel(old0 | l, bank->base +
-						OMAP4_GPIO_LEVELDETECT0);
-				__raw_writel(old1 | l, bank->base +
-						OMAP4_GPIO_LEVELDETECT1);
-				__raw_writel(old0, bank->base +
-						OMAP4_GPIO_LEVELDETECT0);
-				__raw_writel(old1, bank->base +
-						OMAP4_GPIO_LEVELDETECT1);
+				old0 |= l;
+				old1 |= l;
 			}
+			__raw_writel(old0, bank->base +
+						bank->regs->leveldetect0);
+			__raw_writel(old1, bank->base +
+						bank->regs->leveldetect1);
 		}
 	}
 }