mbox series

[v5,0/3] Add logic to consolidate TRBs for Synopsys xHC

Message ID cover.1602853270.git.joglekar@synopsys.com (mailing list archive)
Headers show
Series Add logic to consolidate TRBs for Synopsys xHC | expand

Message

Tejas Joglekar Oct. 16, 2020, 1:04 p.m. UTC
The Synopsys xHC has an internal TRB cache of size TRB_CACHE_SIZE for
each endpoint. The default value for TRB_CACHE_SIZE is 16 for SS and 8
for HS. The controller loads and updates the TRB cache from the
transfer ring in system memory whenever the driver issues a start
transfer or update transfer command.

For chained TRBs, the Synopsys xHC requires that the total amount of
bytes for all TRBs loaded in the TRB cache be greater than or equal to
1 MPS. Or the chain ends within the TRB cache (with a last TRB).

If this requirement is not met, the controller will not be able to
send or receive a packet and it will hang causing a driver timeout and
error.

This patch set adds logic to the XHCI driver to detect and prevent this
from happening along with the quirk to enable this logic for Synopsys
HAPS platform.

Based on Mathias's feedback on previous implementation where consolidation
was done in TRB cache, with this patch series the implementation is done
during mapping of the URB by consolidating the SG list into a temporary
buffer if the SG list buffer sizes within TRB_CACHE_SIZE is less than MPS.

Changes since v4:
 - Updated [Patch 3/3] platform data structure initialization
 - Trivial changes in commit wordings

Changes since v3:
 - Removed the dt-binding patch
 - Added new patch to pass the quirk as platform data
 - Modified the patch to set the quirk

Changes since v2:
 - Modified the xhci_unmap_temp_buffer function to unmap dma and c
   the dma flag
 - Removed RFC tag

Changes since v1:
 - Comments from Greg are addressed on [PATCH 4/4] and [PATCH 1/4]
 - Renamed the property and quirk as in other patches based on [PATCH 1/4]



Tejas Joglekar (3):
  usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK
  usb: xhci: Use temporary buffer to consolidate SG
  usb: dwc3: Pass quirk as platform data

 drivers/usb/dwc3/host.c      |  10 +++
 drivers/usb/host/xhci-plat.c |   3 +
 drivers/usb/host/xhci-ring.c |   2 +-
 drivers/usb/host/xhci.c      | 137 ++++++++++++++++++++++++++++++++++-
 drivers/usb/host/xhci.h      |   5 ++
 5 files changed, 155 insertions(+), 2 deletions(-)

Comments

Tejas Joglekar Oct. 27, 2020, 6:28 p.m. UTC | #1
Hi Mathias,
On 10/16/2020 6:34 PM, Tejas Joglekar wrote:
> The Synopsys xHC has an internal TRB cache of size TRB_CACHE_SIZE for
> each endpoint. The default value for TRB_CACHE_SIZE is 16 for SS and 8
> for HS. The controller loads and updates the TRB cache from the
> transfer ring in system memory whenever the driver issues a start
> transfer or update transfer command.
> 
> For chained TRBs, the Synopsys xHC requires that the total amount of
> bytes for all TRBs loaded in the TRB cache be greater than or equal to
> 1 MPS. Or the chain ends within the TRB cache (with a last TRB).
> 
> If this requirement is not met, the controller will not be able to
> send or receive a packet and it will hang causing a driver timeout and
> error.
> 
> This patch set adds logic to the XHCI driver to detect and prevent this
> from happening along with the quirk to enable this logic for Synopsys
> HAPS platform.
> 
> Based on Mathias's feedback on previous implementation where consolidation
> was done in TRB cache, with this patch series the implementation is done
> during mapping of the URB by consolidating the SG list into a temporary
> buffer if the SG list buffer sizes within TRB_CACHE_SIZE is less than MPS.
> 
> Changes since v4:
>  - Updated [Patch 3/3] platform data structure initialization
>  - Trivial changes in commit wordings
> 
> Changes since v3:
>  - Removed the dt-binding patch
>  - Added new patch to pass the quirk as platform data
>  - Modified the patch to set the quirk
> 
> Changes since v2:
>  - Modified the xhci_unmap_temp_buffer function to unmap dma and c
>    the dma flag
>  - Removed RFC tag
> 
> Changes since v1:
>  - Comments from Greg are addressed on [PATCH 4/4] and [PATCH 1/4]
>  - Renamed the property and quirk as in other patches based on [PATCH 1/4]
> 
> 
> 
> Tejas Joglekar (3):
>   usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK
>   usb: xhci: Use temporary buffer to consolidate SG
>   usb: dwc3: Pass quirk as platform data
> 
>  drivers/usb/dwc3/host.c      |  10 +++
>  drivers/usb/host/xhci-plat.c |   3 +
>  drivers/usb/host/xhci-ring.c |   2 +-
>  drivers/usb/host/xhci.c      | 137 ++++++++++++++++++++++++++++++++++-
>  drivers/usb/host/xhci.h      |   5 ++
>  5 files changed, 155 insertions(+), 2 deletions(-)
> 

I have removed the dependency on setting quirk through device tree binding
and added the quirk using platform data. Can you please review and if 
everything looks OK, can you please add this patch series to your tree?

Thanks & Regards,
 Tejas Joglekar
Tejas Joglekar Oct. 28, 2020, 3:20 p.m. UTC | #2
Hi,
On 10/28/2020 8:12 PM, Mathias Nyman wrote:
> On 27.10.2020 20.28, Tejas Joglekar wrote:
>> Hi Mathias,
>> On 10/16/2020 6:34 PM, Tejas Joglekar wrote:
>>> The Synopsys xHC has an internal TRB cache of size TRB_CACHE_SIZE for
>>> each endpoint. The default value for TRB_CACHE_SIZE is 16 for SS and 8
>>> for HS. The controller loads and updates the TRB cache from the
>>> transfer ring in system memory whenever the driver issues a start
>>> transfer or update transfer command.
>>>
>>> For chained TRBs, the Synopsys xHC requires that the total amount of
>>> bytes for all TRBs loaded in the TRB cache be greater than or equal to
>>> 1 MPS. Or the chain ends within the TRB cache (with a last TRB).
>>>
>>> If this requirement is not met, the controller will not be able to
>>> send or receive a packet and it will hang causing a driver timeout and
>>> error.
>>>
>>> This patch set adds logic to the XHCI driver to detect and prevent this
>>> from happening along with the quirk to enable this logic for Synopsys
>>> HAPS platform.
>>>
>>> Based on Mathias's feedback on previous implementation where consolidation
>>> was done in TRB cache, with this patch series the implementation is done
>>> during mapping of the URB by consolidating the SG list into a temporary
>>> buffer if the SG list buffer sizes within TRB_CACHE_SIZE is less than MPS.
>>>
>>> Changes since v4:
>>>  - Updated [Patch 3/3] platform data structure initialization
>>>  - Trivial changes in commit wordings
>>>
>>> Changes since v3:
>>>  - Removed the dt-binding patch
>>>  - Added new patch to pass the quirk as platform data
>>>  - Modified the patch to set the quirk
>>>
>>> Changes since v2:
>>>  - Modified the xhci_unmap_temp_buffer function to unmap dma and c
>>>    the dma flag
>>>  - Removed RFC tag
>>>
>>> Changes since v1:
>>>  - Comments from Greg are addressed on [PATCH 4/4] and [PATCH 1/4]
>>>  - Renamed the property and quirk as in other patches based on [PATCH 1/4]
>>>
>>>
>>>
>>> Tejas Joglekar (3):
>>>   usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK
>>>   usb: xhci: Use temporary buffer to consolidate SG
>>>   usb: dwc3: Pass quirk as platform data
>>>
>>>  drivers/usb/dwc3/host.c      |  10 +++
>>>  drivers/usb/host/xhci-plat.c |   3 +
>>>  drivers/usb/host/xhci-ring.c |   2 +-
>>>  drivers/usb/host/xhci.c      | 137 ++++++++++++++++++++++++++++++++++-
>>>  drivers/usb/host/xhci.h      |   5 ++
>>>  5 files changed, 155 insertions(+), 2 deletions(-)
>>>
>>
>> I have removed the dependency on setting quirk through device tree binding
>> and added the quirk using platform data. Can you please review and if 
>> everything looks OK, can you please add this patch series to your tree?
> 
> Sure, there aren't any functional changes to xhci since v3 of this series right?
> And if I remember correctly Felipe didn't have any objections to the dwc3 part either.
> 
You are right, there are no functional changes to xhci since v3.

> Felipe, do you want to take the 3/3 dwc3 patch separately after 1/3 and 2/3 are in, or should
> I take them all, or ask if Greg would like to pick up this series?
> 
> -Mathias 
> 

Regards,
Tejas Joglekar
Tejas Joglekar Nov. 6, 2020, 4:06 p.m. UTC | #3
Hi Felipe,
On 10/28/2020 8:50 PM, Tejas Joglekar wrote:
> Hi,
> On 10/28/2020 8:12 PM, Mathias Nyman wrote:
>> On 27.10.2020 20.28, Tejas Joglekar wrote:
>>> Hi Mathias,
>>> On 10/16/2020 6:34 PM, Tejas Joglekar wrote:
>>>> The Synopsys xHC has an internal TRB cache of size TRB_CACHE_SIZE for
>>>> each endpoint. The default value for TRB_CACHE_SIZE is 16 for SS and 8
>>>> for HS. The controller loads and updates the TRB cache from the
>>>> transfer ring in system memory whenever the driver issues a start
>>>> transfer or update transfer command.
>>>>
>>>> For chained TRBs, the Synopsys xHC requires that the total amount of
>>>> bytes for all TRBs loaded in the TRB cache be greater than or equal to
>>>> 1 MPS. Or the chain ends within the TRB cache (with a last TRB).
>>>>
>>>> If this requirement is not met, the controller will not be able to
>>>> send or receive a packet and it will hang causing a driver timeout and
>>>> error.
>>>>
>>>> This patch set adds logic to the XHCI driver to detect and prevent this
>>>> from happening along with the quirk to enable this logic for Synopsys
>>>> HAPS platform.
>>>>
>>>> Based on Mathias's feedback on previous implementation where consolidation
>>>> was done in TRB cache, with this patch series the implementation is done
>>>> during mapping of the URB by consolidating the SG list into a temporary
>>>> buffer if the SG list buffer sizes within TRB_CACHE_SIZE is less than MPS.
>>>>
>>>> Changes since v4:
>>>>  - Updated [Patch 3/3] platform data structure initialization
>>>>  - Trivial changes in commit wordings
>>>>
>>>> Changes since v3:
>>>>  - Removed the dt-binding patch
>>>>  - Added new patch to pass the quirk as platform data
>>>>  - Modified the patch to set the quirk
>>>>
>>>> Changes since v2:
>>>>  - Modified the xhci_unmap_temp_buffer function to unmap dma and c
>>>>    the dma flag
>>>>  - Removed RFC tag
>>>>
>>>> Changes since v1:
>>>>  - Comments from Greg are addressed on [PATCH 4/4] and [PATCH 1/4]
>>>>  - Renamed the property and quirk as in other patches based on [PATCH 1/4]
>>>>
>>>>
>>>>
>>>> Tejas Joglekar (3):
>>>>   usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK
>>>>   usb: xhci: Use temporary buffer to consolidate SG
>>>>   usb: dwc3: Pass quirk as platform data
>>>>
>>>>  drivers/usb/dwc3/host.c      |  10 +++
>>>>  drivers/usb/host/xhci-plat.c |   3 +
>>>>  drivers/usb/host/xhci-ring.c |   2 +-
>>>>  drivers/usb/host/xhci.c      | 137 ++++++++++++++++++++++++++++++++++-
>>>>  drivers/usb/host/xhci.h      |   5 ++
>>>>  5 files changed, 155 insertions(+), 2 deletions(-)
>>>>
>>>
>>> I have removed the dependency on setting quirk through device tree binding
>>> and added the quirk using platform data. Can you please review and if 
>>> everything looks OK, can you please add this patch series to your tree?
>>
>> Sure, there aren't any functional changes to xhci since v3 of this series right?
>> And if I remember correctly Felipe didn't have any objections to the dwc3 part either.
>>
> You are right, there are no functional changes to xhci since v3.
> 
>> Felipe, do you want to take the 3/3 dwc3 patch separately after 1/3 and 2/3 are in, or should
>> I take them all, or ask if Greg would like to pick up this series?
>>
How would you like Mathias to go about merging the patch series?

>> -Mathias 
>>
> 
> Regards,
> Tejas Joglekar
> 

Thanks & Regards,
Tejas Joglekar
Tejas Joglekar Nov. 12, 2020, 2:31 a.m. UTC | #4
Hi,
On 11/6/2020 9:36 PM, Tejas Joglekar wrote:
> Hi Felipe,
> On 10/28/2020 8:50 PM, Tejas Joglekar wrote:
>> Hi,
>> On 10/28/2020 8:12 PM, Mathias Nyman wrote:
>>> On 27.10.2020 20.28, Tejas Joglekar wrote:
>>>> Hi Mathias,
>>>> On 10/16/2020 6:34 PM, Tejas Joglekar wrote:
>>>>> The Synopsys xHC has an internal TRB cache of size TRB_CACHE_SIZE for
>>>>> each endpoint. The default value for TRB_CACHE_SIZE is 16 for SS and 8
>>>>> for HS. The controller loads and updates the TRB cache from the
>>>>> transfer ring in system memory whenever the driver issues a start
>>>>> transfer or update transfer command.
>>>>>
>>>>> For chained TRBs, the Synopsys xHC requires that the total amount of
>>>>> bytes for all TRBs loaded in the TRB cache be greater than or equal to
>>>>> 1 MPS. Or the chain ends within the TRB cache (with a last TRB).
>>>>>
>>>>> If this requirement is not met, the controller will not be able to
>>>>> send or receive a packet and it will hang causing a driver timeout and
>>>>> error.
>>>>>
>>>>> This patch set adds logic to the XHCI driver to detect and prevent this
>>>>> from happening along with the quirk to enable this logic for Synopsys
>>>>> HAPS platform.
>>>>>
>>>>> Based on Mathias's feedback on previous implementation where consolidation
>>>>> was done in TRB cache, with this patch series the implementation is done
>>>>> during mapping of the URB by consolidating the SG list into a temporary
>>>>> buffer if the SG list buffer sizes within TRB_CACHE_SIZE is less than MPS.
>>>>>
>>>>> Changes since v4:
>>>>>  - Updated [Patch 3/3] platform data structure initialization
>>>>>  - Trivial changes in commit wordings
>>>>>
>>>>> Changes since v3:
>>>>>  - Removed the dt-binding patch
>>>>>  - Added new patch to pass the quirk as platform data
>>>>>  - Modified the patch to set the quirk
>>>>>
>>>>> Changes since v2:
>>>>>  - Modified the xhci_unmap_temp_buffer function to unmap dma and c
>>>>>    the dma flag
>>>>>  - Removed RFC tag
>>>>>
>>>>> Changes since v1:
>>>>>  - Comments from Greg are addressed on [PATCH 4/4] and [PATCH 1/4]
>>>>>  - Renamed the property and quirk as in other patches based on [PATCH 1/4]
>>>>>
>>>>>
>>>>>
>>>>> Tejas Joglekar (3):
>>>>>   usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK
>>>>>   usb: xhci: Use temporary buffer to consolidate SG
>>>>>   usb: dwc3: Pass quirk as platform data
>>>>>
>>>>>  drivers/usb/dwc3/host.c      |  10 +++
>>>>>  drivers/usb/host/xhci-plat.c |   3 +
>>>>>  drivers/usb/host/xhci-ring.c |   2 +-
>>>>>  drivers/usb/host/xhci.c      | 137 ++++++++++++++++++++++++++++++++++-
>>>>>  drivers/usb/host/xhci.h      |   5 ++
>>>>>  5 files changed, 155 insertions(+), 2 deletions(-)
>>>>>
>>>> I have removed the dependency on setting quirk through device tree binding
>>>> and added the quirk using platform data. Can you please review and if 
>>>> everything looks OK, can you please add this patch series to your tree?
>>> Sure, there aren't any functional changes to xhci since v3 of this series right?
>>> And if I remember correctly Felipe didn't have any objections to the dwc3 part either.
>>>
>> You are right, there are no functional changes to xhci since v3.
>>
>>> Felipe, do you want to take the 3/3 dwc3 patch separately after 1/3 and 2/3 are in, or should
>>> I take them all, or ask if Greg would like to pick up this series?
>>>
> How would you like Mathias to go about merging the patch series?
@Felipe: Any input on this ?


Thanks & Regards,

Tejas Joglekar
Tejas Joglekar Nov. 17, 2020, 5:16 p.m. UTC | #5
Hello Mathias,
On 11/12/2020 8:01 AM, Tejas Joglekar wrote:
> Hi,
> On 11/6/2020 9:36 PM, Tejas Joglekar wrote:
>> Hi Felipe,
>> On 10/28/2020 8:50 PM, Tejas Joglekar wrote:
>>> Hi,
>>> On 10/28/2020 8:12 PM, Mathias Nyman wrote:
>>>> On 27.10.2020 20.28, Tejas Joglekar wrote:
>>>>> Hi Mathias,
>>>>> On 10/16/2020 6:34 PM, Tejas Joglekar wrote:
>>>>>> The Synopsys xHC has an internal TRB cache of size TRB_CACHE_SIZE for
>>>>>> each endpoint. The default value for TRB_CACHE_SIZE is 16 for SS and 8
>>>>>> for HS. The controller loads and updates the TRB cache from the
>>>>>> transfer ring in system memory whenever the driver issues a start
>>>>>> transfer or update transfer command.
>>>>>>
>>>>>> For chained TRBs, the Synopsys xHC requires that the total amount of
>>>>>> bytes for all TRBs loaded in the TRB cache be greater than or equal to
>>>>>> 1 MPS. Or the chain ends within the TRB cache (with a last TRB).
>>>>>>
>>>>>> If this requirement is not met, the controller will not be able to
>>>>>> send or receive a packet and it will hang causing a driver timeout and
>>>>>> error.
>>>>>>
>>>>>> This patch set adds logic to the XHCI driver to detect and prevent this
>>>>>> from happening along with the quirk to enable this logic for Synopsys
>>>>>> HAPS platform.
>>>>>>
>>>>>> Based on Mathias's feedback on previous implementation where consolidation
>>>>>> was done in TRB cache, with this patch series the implementation is done
>>>>>> during mapping of the URB by consolidating the SG list into a temporary
>>>>>> buffer if the SG list buffer sizes within TRB_CACHE_SIZE is less than MPS.
>>>>>>
>>>>>> Changes since v4:
>>>>>>  - Updated [Patch 3/3] platform data structure initialization
>>>>>>  - Trivial changes in commit wordings
>>>>>>
>>>>>> Changes since v3:
>>>>>>  - Removed the dt-binding patch
>>>>>>  - Added new patch to pass the quirk as platform data
>>>>>>  - Modified the patch to set the quirk
>>>>>>
>>>>>> Changes since v2:
>>>>>>  - Modified the xhci_unmap_temp_buffer function to unmap dma and c
>>>>>>    the dma flag
>>>>>>  - Removed RFC tag
>>>>>>
>>>>>> Changes since v1:
>>>>>>  - Comments from Greg are addressed on [PATCH 4/4] and [PATCH 1/4]
>>>>>>  - Renamed the property and quirk as in other patches based on [PATCH 1/4]
>>>>>>
>>>>>>
>>>>>>
>>>>>> Tejas Joglekar (3):
>>>>>>   usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK
>>>>>>   usb: xhci: Use temporary buffer to consolidate SG
>>>>>>   usb: dwc3: Pass quirk as platform data
>>>>>>
>>>>>>  drivers/usb/dwc3/host.c      |  10 +++
>>>>>>  drivers/usb/host/xhci-plat.c |   3 +
>>>>>>  drivers/usb/host/xhci-ring.c |   2 +-
>>>>>>  drivers/usb/host/xhci.c      | 137 ++++++++++++++++++++++++++++++++++-
>>>>>>  drivers/usb/host/xhci.h      |   5 ++
>>>>>>  5 files changed, 155 insertions(+), 2 deletions(-)
>>>>>>
>>>>> I have removed the dependency on setting quirk through device tree binding
>>>>> and added the quirk using platform data. Can you please review and if 
>>>>> everything looks OK, can you please add this patch series to your tree?
>>>> Sure, there aren't any functional changes to xhci since v3 of this series right?
>>>> And if I remember correctly Felipe didn't have any objections to the dwc3 part either.
>>>>
>>> You are right, there are no functional changes to xhci since v3.
>>>
>>>> Felipe, do you want to take the 3/3 dwc3 patch separately after 1/3 and 2/3 are in, or should
>>>> I take them all, or ask if Greg would like to pick up this series?
>>>>
@Mathias: Can you please take up 2 patches and may be Felipe can take up the dwc3 ?

It would help if this patch series goes in upcoming rc.

>> How would you like Mathias to go about merging the patch series?
> @Felipe: Any input on this ?
>
>
Thanks & Regards,

Tejas Joglekar
Mathias Nyman Nov. 18, 2020, 2:09 p.m. UTC | #6
On 17.11.2020 19.16, Tejas Joglekar wrote:
> Hello Mathias,
> On 11/12/2020 8:01 AM, Tejas Joglekar wrote:
>> Hi,
>> On 11/6/2020 9:36 PM, Tejas Joglekar wrote:
>>> Hi Felipe,
>>> On 10/28/2020 8:50 PM, Tejas Joglekar wrote:
>>>> Hi,
>>>> On 10/28/2020 8:12 PM, Mathias Nyman wrote:
>>>>> On 27.10.2020 20.28, Tejas Joglekar wrote:
>>>>>> Hi Mathias,
>>>>>> On 10/16/2020 6:34 PM, Tejas Joglekar wrote:
>>>>>>> The Synopsys xHC has an internal TRB cache of size TRB_CACHE_SIZE for
>>>>>>> each endpoint. The default value for TRB_CACHE_SIZE is 16 for SS and 8
>>>>>>> for HS. The controller loads and updates the TRB cache from the
>>>>>>> transfer ring in system memory whenever the driver issues a start
>>>>>>> transfer or update transfer command.
>>>>>>>
>>>>>>> For chained TRBs, the Synopsys xHC requires that the total amount of
>>>>>>> bytes for all TRBs loaded in the TRB cache be greater than or equal to
>>>>>>> 1 MPS. Or the chain ends within the TRB cache (with a last TRB).
>>>>>>>
>>>>>>> If this requirement is not met, the controller will not be able to
>>>>>>> send or receive a packet and it will hang causing a driver timeout and
>>>>>>> error.
>>>>>>>
>>>>>>> This patch set adds logic to the XHCI driver to detect and prevent this
>>>>>>> from happening along with the quirk to enable this logic for Synopsys
>>>>>>> HAPS platform.
>>>>>>>
>>>>>>> Based on Mathias's feedback on previous implementation where consolidation
>>>>>>> was done in TRB cache, with this patch series the implementation is done
>>>>>>> during mapping of the URB by consolidating the SG list into a temporary
>>>>>>> buffer if the SG list buffer sizes within TRB_CACHE_SIZE is less than MPS.
>>>>>>>
>>>>>>> Changes since v4:
>>>>>>>  - Updated [Patch 3/3] platform data structure initialization
>>>>>>>  - Trivial changes in commit wordings
>>>>>>>
>>>>>>> Changes since v3:
>>>>>>>  - Removed the dt-binding patch
>>>>>>>  - Added new patch to pass the quirk as platform data
>>>>>>>  - Modified the patch to set the quirk
>>>>>>>
>>>>>>> Changes since v2:
>>>>>>>  - Modified the xhci_unmap_temp_buffer function to unmap dma and c
>>>>>>>    the dma flag
>>>>>>>  - Removed RFC tag
>>>>>>>
>>>>>>> Changes since v1:
>>>>>>>  - Comments from Greg are addressed on [PATCH 4/4] and [PATCH 1/4]
>>>>>>>  - Renamed the property and quirk as in other patches based on [PATCH 1/4]
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Tejas Joglekar (3):
>>>>>>>   usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK
>>>>>>>   usb: xhci: Use temporary buffer to consolidate SG
>>>>>>>   usb: dwc3: Pass quirk as platform data
>>>>>>>
>>>>>>>  drivers/usb/dwc3/host.c      |  10 +++
>>>>>>>  drivers/usb/host/xhci-plat.c |   3 +
>>>>>>>  drivers/usb/host/xhci-ring.c |   2 +-
>>>>>>>  drivers/usb/host/xhci.c      | 137 ++++++++++++++++++++++++++++++++++-
>>>>>>>  drivers/usb/host/xhci.h      |   5 ++
>>>>>>>  5 files changed, 155 insertions(+), 2 deletions(-)
>>>>>>>
>>>>>> I have removed the dependency on setting quirk through device tree binding
>>>>>> and added the quirk using platform data. Can you please review and if 
>>>>>> everything looks OK, can you please add this patch series to your tree?
>>>>> Sure, there aren't any functional changes to xhci since v3 of this series right?
>>>>> And if I remember correctly Felipe didn't have any objections to the dwc3 part either.
>>>>>
>>>> You are right, there are no functional changes to xhci since v3.
>>>>
>>>>> Felipe, do you want to take the 3/3 dwc3 patch separately after 1/3 and 2/3 are in, or should
>>>>> I take them all, or ask if Greg would like to pick up this series?
>>>>>
> @Mathias: Can you please take up 2 patches and may be Felipe can take up the dwc3 ?
> 
> It would help if this patch series goes in upcoming rc.
> 

Sure, added two first patches to my for-usb-next branch.
Let them sit there for a while to get them through some testing loops

-Mathias
Tejas Joglekar Nov. 19, 2020, 1:19 a.m. UTC | #7
On 11/18/2020 7:39 PM, Mathias Nyman wrote:
>> @Mathias: Can you please take up 2 patches and may be Felipe can take up the dwc3 ?
>>
>> It would help if this patch series goes in upcoming rc.
>>
> Sure, added two first patches to my for-usb-next branch.
> Let them sit there for a while to get them through some testing loops
>
> -Mathias
>
Sure, thanks Mathias