| Message ID | 20201001091131.30514-3-michael@walle.cc (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: add FlexCAN support to LS1028A and sl28 | expand |
On Thu, Oct 01, 2020 at 11:11:30AM +0200, Michael Walle wrote: > The LS1028A has two FlexCAN controller. These are compatible with > the ones from the LX2160A. Add the nodes. > > The first controller was tested on the Kontron sl28 board. > > Signed-off-by: Michael Walle <michael@walle.cc> Applied, thanks.
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 73e4f9466887..f223396b8266 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -386,6 +386,24 @@ status = "disabled"; }; + can0: can@2180000 { + compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"; + reg = <0x0 0x2180000 0x0 0x10000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sysclk>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + can1: can@2190000 { + compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"; + reg = <0x0 0x2190000 0x0 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sysclk>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + duart0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0500 0x0 0x100>;
The LS1028A has two FlexCAN controller. These are compatible with the ones from the LX2160A. Add the nodes. The first controller was tested on the Kontron sl28 board. Signed-off-by: Michael Walle <michael@walle.cc> --- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)