[net-next,v2] net/usb/r8153_ecm: support ECM mode for RTL8153

Message ID	1394712342-15778-388-Taiwan-albertk@realtek.com (mailing list archive)
State	Superseded
Headers	show Return-Path: <SRS0=TW+4=EF=vger.kernel.org=linux-usb-owner@kernel.org> Authenticated-By: X-SpamFilter-By: ArmorX SpamTrap 5.73 with qID 09U3NJI50030143, This message is accepted by code: ctloc85258 From: Hayes Wang <hayeswang@realtek.com> To: <netdev@vger.kernel.org> CC: <nic_swsd@realtek.com>, <linux-kernel@vger.kernel.org>, <linux-usb@vger.kernel.org>, Hayes Wang <hayeswang@realtek.com> Subject: [PATCH net-next v2] net/usb/r8153_ecm: support ECM mode for RTL8153 Date: Fri, 30 Oct 2020 11:23:08 +0800 Message-ID: <1394712342-15778-388-Taiwan-albertk@realtek.com> In-Reply-To: <1394712342-15778-387-Taiwan-albertk@realtek.com> References: <1394712342-15778-387-Taiwan-albertk@realtek.com> MIME-Version: 1.0 Content-Transfer-Encoding: 7BIT Content-Type: text/plain; charset=US-ASCII Precedence: bulk
Series	[net-next,v2] net/usb/r8153_ecm: support ECM mode for RTL8153 \| expand [net-next,v2] net/usb/r8153_ecm: support ECM mode for RTL8153 [net-next,v3,2/2] net/usb/r8153_ecm: support ECM mode for RTL8153

diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index 99fd12be2111..99381e6bea78 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -13,7 +13,7 @@ obj-$(CONFIG_USB_LAN78XX) += lan78xx.o obj-$(CONFIG_USB_NET_AX8817X) += asix.o asix-y := asix_devices.o asix_common.o ax88172a.o obj-$(CONFIG_USB_NET_AX88179_178A) += ax88179_178a.o -obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o +obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o r8153_ecm.o obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o obj-$(CONFIG_USB_NET_DM9601) += dm9601.o obj-$(CONFIG_USB_NET_SR9700) += sr9700.o diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index b1770489aca5..7d2523d96c51 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -26,6 +26,7 @@ #include <linux/acpi.h> #include <linux/firmware.h> #include <crypto/hash.h> +#include <linux/usb/r8152.h> /* Information for net-next */ #define NETNEXT_VERSION "11" @@ -653,18 +654,6 @@ enum rtl_register_content { #define INTR_LINK 0x0004 -#define RTL8152_REQT_READ 0xc0 -#define RTL8152_REQT_WRITE 0x40 -#define RTL8152_REQ_GET_REGS 0x05 -#define RTL8152_REQ_SET_REGS 0x05 - -#define BYTE_EN_DWORD 0xff -#define BYTE_EN_WORD 0x33 -#define BYTE_EN_BYTE 0x11 -#define BYTE_EN_SIX_BYTES 0x3f -#define BYTE_EN_START_MASK 0x0f -#define BYTE_EN_END_MASK 0xf0 - #define RTL8153_MAX_PACKET 9216 /* 9K */ #define RTL8153_MAX_MTU (RTL8153_MAX_PACKET - VLAN_ETH_HLEN - \ ETH_FCS_LEN) @@ -689,21 +678,9 @@ enum rtl8152_flags { LENOVO_MACPASSTHRU, }; -/* Define these values to match your device */ -#define VENDOR_ID_REALTEK 0x0bda -#define VENDOR_ID_MICROSOFT 0x045e -#define VENDOR_ID_SAMSUNG 0x04e8 -#define VENDOR_ID_LENOVO 0x17ef -#define VENDOR_ID_LINKSYS 0x13b1 -#define VENDOR_ID_NVIDIA 0x0955 -#define VENDOR_ID_TPLINK 0x2357 - #define DEVICE_ID_THINKPAD_THUNDERBOLT3_DOCK_GEN2 0x3082 #define DEVICE_ID_THINKPAD_USB_C_DOCK_GEN2 0xa387 -#define MCU_TYPE_PLA 0x0100 -#define MCU_TYPE_USB 0x0000 - struct tally_counter { __le64 tx_packets; __le64 rx_packets; @@ -6615,7 +6592,7 @@ static int rtl_fw_init(struct r8152 *tp) return 0; } -static u8 rtl_get_version(struct usb_interface *intf) +u8 rtl8152_get_version(struct usb_interface *intf) { struct usb_device *udev = interface_to_usbdev(intf); u32 ocp_data = 0; @@ -6673,12 +6650,13 @@ static u8 rtl_get_version(struct usb_interface *intf) return version; } +EXPORT_SYMBOL_GPL(rtl8152_get_version); static int rtl8152_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev(intf); - u8 version = rtl_get_version(intf); + u8 version = rtl8152_get_version(intf); struct r8152 *tp; struct net_device *netdev; int ret; diff --git a/drivers/net/usb/r8153_ecm.c b/drivers/net/usb/r8153_ecm.c new file mode 100644 index 000000000000..2c3fabd38b16 --- /dev/null +++ b/drivers/net/usb/r8153_ecm.c @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/mii.h> +#include <linux/usb.h> +#include <linux/usb/cdc.h> +#include <linux/usb/usbnet.h> +#include <linux/usb/r8152.h> + +#define OCP_BASE 0xe86c + +static int pla_read_word(struct usbnet *dev, u16 index) +{ + u16 byen = BYTE_EN_WORD; + u8 shift = index & 2; + __le32 tmp; + int ret; + + if (shift) + byen <<= shift; + + index &= ~3; + + ret = usbnet_read_cmd(dev, RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, index, + MCU_TYPE_PLA | byen, &tmp, sizeof(tmp)); + if (ret < 0) + goto out; + + ret = __le32_to_cpu(tmp); + ret >>= (shift * 8); + ret &= 0xffff; + +out: + return ret; +} + +static int pla_write_word(struct usbnet *dev, u16 index, u32 data) +{ + u32 mask = 0xffff; + u16 byen = BYTE_EN_WORD; + u8 shift = index & 2; + __le32 tmp; + int ret; + + data &= mask; + + if (shift) { + byen <<= shift; + mask <<= (shift * 8); + data <<= (shift * 8); + } + + index &= ~3; + + ret = usbnet_read_cmd(dev, RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, index, + MCU_TYPE_PLA | byen, &tmp, sizeof(tmp)); + + if (ret < 0) + goto out; + + data |= __le32_to_cpu(tmp) & ~mask; + tmp = __cpu_to_le32(data); + + ret = usbnet_write_cmd(dev, RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE, index, + MCU_TYPE_PLA | byen, &tmp, sizeof(tmp)); + +out: + return ret; +} + +static int r8153_ecm_mdio_read(struct net_device *netdev, int phy_id, int reg) +{ + struct usbnet *dev = netdev_priv(netdev); + int ret; + + ret = pla_write_word(dev, OCP_BASE, 0xa000); + if (ret < 0) + goto out; + + ret = pla_read_word(dev, 0xb400 + reg * 2); + +out: + return ret; +} + +static void r8153_ecm_mdio_write(struct net_device *netdev, int phy_id, int reg, int val) +{ + struct usbnet *dev = netdev_priv(netdev); + int ret; + + ret = pla_write_word(dev, OCP_BASE, 0xa000); + if (ret < 0) + return; + + ret = pla_write_word(dev, 0xb400 + reg * 2, val); +} + +static int r8153_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int status; + + status = usbnet_cdc_bind(dev, intf); + if (status < 0) + return status; + + dev->mii.dev = dev->net; + dev->mii.mdio_read = r8153_ecm_mdio_read; + dev->mii.mdio_write = r8153_ecm_mdio_write; + dev->mii.reg_num_mask = 0x1f; + dev->mii.supports_gmii = 1; + + return status; +} + +static const struct driver_info r8153_info = { + .description = "RTL8153 ECM Device", + .flags = FLAG_ETHER, + .bind = r8153_bind, + .unbind = usbnet_cdc_unbind, + .status = usbnet_cdc_status, + .manage_power = usbnet_manage_power, +}; + +static const struct usb_device_id products[] = { +{ + USB_DEVICE_AND_INTERFACE_INFO(VENDOR_ID_REALTEK, 0x8153, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long)&r8153_info, +}, + + { }, /* END */ +}; +MODULE_DEVICE_TABLE(usb, products); + +static int rtl8153_ecm_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ +#if IS_REACHABLE(CONFIG_USB_RTL8152) + if (rtl8152_get_version(intf)) + return -ENODEV; +#endif + + return usbnet_probe(intf, id); +} + +static struct usb_driver r8153_ecm_driver = { + .name = "r8153_ecm", + .id_table = products, + .probe = rtl8153_ecm_probe, + .disconnect = usbnet_disconnect, + .suspend = usbnet_suspend, + .resume = usbnet_resume, + .reset_resume = usbnet_resume, + .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, +}; + +module_usb_driver(r8153_ecm_driver); + +MODULE_AUTHOR("Hayes Wang"); +MODULE_DESCRIPTION("Realtek USB ECM device"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/usb/r8152.h b/include/linux/usb/r8152.h new file mode 100644 index 000000000000..20d88b1defc3 --- /dev/null +++ b/include/linux/usb/r8152.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2020 Realtek Semiconductor Corp. All rights reserved. + */ + +#ifndef __LINUX_R8152_H +#define __LINUX_R8152_H + +#define RTL8152_REQT_READ 0xc0 +#define RTL8152_REQT_WRITE 0x40 +#define RTL8152_REQ_GET_REGS 0x05 +#define RTL8152_REQ_SET_REGS 0x05 + +#define BYTE_EN_DWORD 0xff +#define BYTE_EN_WORD 0x33 +#define BYTE_EN_BYTE 0x11 +#define BYTE_EN_SIX_BYTES 0x3f +#define BYTE_EN_START_MASK 0x0f +#define BYTE_EN_END_MASK 0xf0 + +#define MCU_TYPE_PLA 0x0100 +#define MCU_TYPE_USB 0x0000 + +/* Define these values to match your device */ +#define VENDOR_ID_REALTEK 0x0bda +#define VENDOR_ID_MICROSOFT 0x045e +#define VENDOR_ID_SAMSUNG 0x04e8 +#define VENDOR_ID_LENOVO 0x17ef +#define VENDOR_ID_LINKSYS 0x13b1 +#define VENDOR_ID_NVIDIA 0x0955 +#define VENDOR_ID_TPLINK 0x2357 + +#if IS_REACHABLE(CONFIG_USB_RTL8152) +extern u8 rtl8152_get_version(struct usb_interface *intf); +#endif + +#endif /* __LINUX_R8152_H */

[net-next,v2] net/usb/r8153_ecm: support ECM mode for RTL8153

Commit Message

Comments

Patch