diff mbox series

[v8,1/4] SFH: Add maintainers and documentation for AMD SFH based on HID framework

Message ID 20201009200138.1847317-2-Sandeep.Singh@amd.com (mailing list archive)
State New, archived
Headers show
Series SFH: Add Support for AMD Sensor Fusion Hub | expand

Commit Message

Sandeep Singh Oct. 9, 2020, 8:01 p.m. UTC 
From: Sandeep Singh <sandeep.singh@amd.com>

Add Maintainers for AMD SFH(SENSOR FUSION HUB) Solution and work flow
document.

Co-developed-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
---
 Documentation/hid/amd-sfh-hid.rst | 145 ++++++++++++++++++++++++++++++
 Documentation/hid/index.rst       |   1 +
 MAINTAINERS                       |   8 ++
 3 files changed, 154 insertions(+)
 create mode 100644 Documentation/hid/amd-sfh-hid.rst

Comments

Lukas Bulwahn Oct. 30, 2020, 8:07 a.m. UTC | #1 
On Sat, 10 Oct 2020, Sandeep Singh wrote:

> From: Sandeep Singh <sandeep.singh@amd.com>
> 
> Add Maintainers for AMD SFH(SENSOR FUSION HUB) Solution and work flow
> document.
> 
> Co-developed-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
> Signed-off-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
> Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
> ---
>  Documentation/hid/amd-sfh-hid.rst | 145 ++++++++++++++++++++++++++++++
>  Documentation/hid/index.rst       |   1 +
>  MAINTAINERS                       |   8 ++
>  3 files changed, 154 insertions(+)
>  create mode 100644 Documentation/hid/amd-sfh-hid.rst
>

I do not know where something went wrong here, but it seems that
the git commit 302f0dad8c97 ("SFH: Add maintainers and 
documentation for AMD SFH based on HID framework") on next-20201030 
dropped the addition of the rst file compared to this patch v8 here.

See:  git show --stat 302f0dad8c97a11abcf145ff3c70

[...]

 Documentation/hid/index.rst | 1 +
 MAINTAINERS                 | 8 ++++++++
 2 files changed, 9 insertions(+)


Hence, ./scripts/get_maintainer.pl --self-test=patterns complains:

  warning: no file matches    F:    Documentation/hid/amd-sfh*


Just that you know...

Lukas
Jiri Kosina Nov. 3, 2020, 10:33 a.m. UTC | #2 
On Fri, 30 Oct 2020, Lukas Bulwahn wrote:

> > From: Sandeep Singh <sandeep.singh@amd.com>
> > 
> > Add Maintainers for AMD SFH(SENSOR FUSION HUB) Solution and work flow
> > document.
> > 
> > Co-developed-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
> > Signed-off-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
> > Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
> > ---
> >  Documentation/hid/amd-sfh-hid.rst | 145 ++++++++++++++++++++++++++++++
> >  Documentation/hid/index.rst       |   1 +
> >  MAINTAINERS                       |   8 ++
> >  3 files changed, 154 insertions(+)
> >  create mode 100644 Documentation/hid/amd-sfh-hid.rst
> >
> 
> I do not know where something went wrong here, but it seems that
> the git commit 302f0dad8c97 ("SFH: Add maintainers and 
> documentation for AMD SFH based on HID framework") on next-20201030 
> dropped the addition of the rst file compared to this patch v8 here.

Thanks for spotting this, that was me fat-fingering conflict resolution. 
I've now pushed out a fix.
diff mbox series

Patch

diff --git a/Documentation/hid/amd-sfh-hid.rst b/Documentation/hid/amd-sfh-hid.rst
new file mode 100644
index 000000000000..1f2fe29ccd4f
--- /dev/null
+++ b/Documentation/hid/amd-sfh-hid.rst
@@ -0,0 +1,145 @@ 
+.. SPDX-License-Identifier: GPL-2.0
+
+
+AMD Sensor Fusion Hub
+=====================
+AMD Sensor Fusion Hub (SFH) is part of an SOC starting from Ryzen based platforms.
+The solution is working well on several OEM products. AMD SFH uses HID over PCIe bus.
+In terms of architecture it resembles ISH, however the major difference is all
+the HID reports are generated as part of the kernel driver.
+
+1. Block Diagram
+================
+
+::
+
+	---------------------------------
+	|  HID User Space Applications  |
+	- -------------------------------
+
+    ---------------------------------------------
+	 ---------------------------------
+	|		HID Core          |
+	 ---------------------------------
+
+	 ---------------------------------
+	|     AMD HID Transport           |
+	 ---------------------------------
+
+	 --------------------------------
+	|             AMD HID Client     |
+	|	with HID Report Generator|
+	 --------------------------------
+
+	 --------------------------------
+	|     AMD MP2 PCIe Driver        |
+	 --------------------------------
+    OS
+    ---------------------------------------------
+    Hardware + Firmware
+         --------------------------------
+         |     SFH MP2 Processor         |
+         --------------------------------
+
+
+AMD HID Transport Layer
+-----------------------
+AMD SFH transport is also implemented as a bus. Each client application executing in the AMD MP2 is
+registered as a device on this bus. Here: MP2 which is an ARM core connected to x86 for processing
+sensor data. The layer, which binds each device (AMD SFH HID driver) identifies the device type and
+registers with the hid core. Transport layer attach a constant "struct hid_ll_driver" object with
+each device. Once a device is registered with HID core, the callbacks provided via this struct are
+used by HID core to communicate with the device. AMD HID Transport layer implements the synchronous calls.
+
+AMD HID Client Layer
+--------------------
+This layer is responsible to implement HID request and descriptors. As firmware is OS agnostic, HID
+client layer fills the HID request structure and descriptors. HID client layer is complex as it is
+interface between MP2 PCIe layer and HID. HID client layer initialized the MP2 PCIe layer and holds
+the instance of MP2 layer. It identifies the number of sensors connected using MP2-PCIe layer. Base
+on that allocates the DRAM address for each and every sensor and pass it to MP2-PCIe driver.On
+enumeration of each the sensor, client layer fills the HID Descriptor structure and HID input repor
+structure. HID Feature report structure is optional. The report descriptor structure varies from
+sensor to sensor.
+
+AMD MP2 PCIe layer
+------------------
+MP2 PCIe Layer is responsible for making all transactions with the firmware over PCIe.
+The connection establishment between firmware and PCIe happens here.
+
+The communication between X86 and MP2 is split into three parts.
+1. Command transfer via the C2P mailbox registers.
+2. Data transfer via DRAM.
+3. Supported sensor info via P2C registers.
+
+Commands are sent to MP2 using C2P Mailbox registers. Writing into C2P Message registers generate
+interrupt to MP2. The client layer allocates the physical memory and the same is sent to MP2 via
+the PCI layer. MP2 firmware writes the command output to the access DRAM memory which the client
+layer has allocated. Firmware always writes minimum of 32 bytes into DRAM. So as a protocol driver
+shall allocate minimum of 32 bytes DRAM space.
+
+Enumeration and Probing flow
+----------------------------
+::
+
+       HID             AMD            AMD                       AMD -PCIe             MP2
+       Core         Transport      Client layer                   layer                FW
+        |		|	       |                           |                 |
+        |		|              |                 on Boot Driver Loaded       |
+        |		|	       |                           |                 |
+        |		|	       |                        MP2-PCIe Int         |
+        |		|              |			   |                 |
+        |		|	       |---Get Number of sensors-> |                 |
+        |		|              |                       Read P2C              |
+        |		|	       |			Register             |
+        |		|              |                           |                 |
+        |               |              | Loop(for No of Sensors)   |                 |
+        |		|	       |----------------------|    |                 |
+        |		|              | Create HID Descriptor|    |                 |
+        |		|	       | Create Input  report |    |                 |
+        |		|              |  Descriptor Map      |    |                 |
+        |		|	       |  the MP2 FW Index to |    |                 |
+        |		|              |   HID Index          |    |                 |
+        |		|	       | Allocate the DRAM    |  Enable              |
+        |		|	       |	address       |  Sensors             |
+        |		|              |----------------------|    |                 |
+        |		| HID transport|                           |    Enable       |
+        |	        |<--Probe------|                           |---Sensor CMD--> |
+        |		| Create the   |			   |                 |
+        |		| HID device   |                           |                 |
+        |               |    (MFD)     |                           |                 |
+        |		| by Populating|			   |                 |
+        |               |  the HID     |                           |                 |
+        |               |  ll_driver   |                           |                 |
+        | HID           |	       |			   |                 |
+        |  add          |              |                           |                 |
+        |Device         |              |                           |                 |
+        |<------------- |	       |			   |                 |
+
+
+Data Flow from Application to the AMD SFH Driver
+------------------------------------------------
+
+::
+
+	        |	       |              |	  	 	          |		    |
+                |	       |	      |			          |                 |
+                |	       |	      |			          |                 |
+                |              |              |                           |                 |
+                |              |              |                           |                 |
+                |HID_req       |              |                           |                 |
+                |get_report    |              |                           |                 |
+                |------------->|              |                           |                 |
+	        |              | HID_get_input|                           |                 |
+	        |              |  report      |                           |                 |
+	        |              |------------->|------------------------|  |                 |
+	        |              |              |  Read the DRAM data for|  |                 |
+	        |              |              |  requested sensor and  |  |                 |
+	        |              |              |  create the HID input  |  |                 |
+	        |              |              |  report                |  |                 |
+	        |              |              |------------------------|  |                 |
+	        |              |Data received |                           |                 |
+	        |              | in HID report|                           |                 |
+    To	        |<-------------|<-------------|                           |                 |
+    Applications|              |              |                           |                 |
+        <-------|              |              |                           |                 |
diff --git a/Documentation/hid/index.rst b/Documentation/hid/index.rst
index 737d66dc16a1..e50f513c579c 100644
--- a/Documentation/hid/index.rst
+++ b/Documentation/hid/index.rst
@@ -16,3 +16,4 @@  Human Interface Devices (HID)
 
    hid-alps
    intel-ish-hid
+   amd-sfh-hid
diff --git a/MAINTAINERS b/MAINTAINERS
index 0d0862b19ce5..a3d3115939b4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -943,6 +943,14 @@  S:	Supported
 F:	arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
 F:	drivers/net/ethernet/amd/xgbe/
 
+AMD SENSOR FUSION HUB DRIVER
+M:	Nehal Shah <nehal-bakulchandra.shah@amd.com>
+M:	Sandeep Singh <sandeep.singh@amd.com>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	Documentation/hid/amd-sfh*
+F:	drivers/hid/amd-sfh-hid/
+
 ANALOG DEVICES INC AD5686 DRIVER
 M:	Michael Hennerich <Michael.Hennerich@analog.com>
 L:	linux-pm@vger.kernel.org