diff mbox series

[2/3] i2c: owl: Add support for atomic transfers

Message ID 1af37112fafd6cf069dfe864560f77996f57d80d.1602190168.git.cristian.ciocaltea@gmail.com (mailing list archive)
State New, archived
Headers show
Series Improve Actions Semi Owl I2C driver | expand

Commit Message

Cristian Ciocaltea Oct. 8, 2020, 9:44 p.m. UTC 
Atomic transfers are required to properly power off a machine through
an I2C controlled PMIC, such as the Actions Semi ATC260x series.

System shutdown may happen with interrupts being disabled and, as a
consequence, the kernel may hang if the driver does not support atomic
transfers.

This functionality is essentially implemented by polling the FIFO
Status register until either Command Execute Completed or NACK Error
bits are set.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
---
 drivers/i2c/busses/i2c-owl.c | 76 ++++++++++++++++++++++++++----------
 1 file changed, 56 insertions(+), 20 deletions(-)

Comments

Manivannan Sadhasivam Oct. 11, 2020, 2:09 p.m. UTC | #1 
On Fri, Oct 09, 2020 at 12:44:40AM +0300, Cristian Ciocaltea wrote:
> Atomic transfers are required to properly power off a machine through
> an I2C controlled PMIC, such as the Actions Semi ATC260x series.
> 
> System shutdown may happen with interrupts being disabled and, as a
> consequence, the kernel may hang if the driver does not support atomic
> transfers.
> 
> This functionality is essentially implemented by polling the FIFO
> Status register until either Command Execute Completed or NACK Error
> bits are set.
> 
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
>  drivers/i2c/busses/i2c-owl.c | 76 ++++++++++++++++++++++++++----------
>  1 file changed, 56 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-owl.c b/drivers/i2c/busses/i2c-owl.c
> index a163b8f308c1..547132768119 100644
> --- a/drivers/i2c/busses/i2c-owl.c
> +++ b/drivers/i2c/busses/i2c-owl.c
> @@ -14,6 +14,7 @@
>  #include <linux/i2c.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
> +#include <linux/iopoll.h>
>  #include <linux/module.h>
>  #include <linux/of_device.h>
>  
> @@ -76,6 +77,7 @@
>  #define OWL_I2C_FIFOCTL_TFR	BIT(2)
>  
>  /* I2Cc_FIFOSTAT Bit Mask */
> +#define OWL_I2C_FIFOSTAT_CECB	BIT(0)
>  #define OWL_I2C_FIFOSTAT_RNB	BIT(1)
>  #define OWL_I2C_FIFOSTAT_RFE	BIT(2)
>  #define OWL_I2C_FIFOSTAT_TFF	BIT(5)
> @@ -83,7 +85,8 @@
>  #define OWL_I2C_FIFOSTAT_RFD	GENMASK(15, 8)
>  
>  /* I2C bus timeout */
> -#define OWL_I2C_TIMEOUT		msecs_to_jiffies(4 * 1000)
> +#define OWL_I2C_TIMEOUT_MS	(4 * 1000)
> +#define OWL_I2C_TIMEOUT		msecs_to_jiffies(OWL_I2C_TIMEOUT_MS)
>  
>  #define OWL_I2C_MAX_RETRIES	50
>  
> @@ -161,15 +164,11 @@ static void owl_i2c_set_freq(struct owl_i2c_dev *i2c_dev)
>  	writel(OWL_I2C_DIV_FACTOR(val), i2c_dev->base + OWL_I2C_REG_CLKDIV);
>  }
>  
> -static irqreturn_t owl_i2c_interrupt(int irq, void *_dev)
> +static void owl_i2c_xfer_data(struct owl_i2c_dev *i2c_dev)
>  {
> -	struct owl_i2c_dev *i2c_dev = _dev;
>  	struct i2c_msg *msg = i2c_dev->msg;
> -	unsigned long flags;
>  	unsigned int stat, fifostat;
>  
> -	spin_lock_irqsave(&i2c_dev->lock, flags);
> -
>  	i2c_dev->err = 0;
>  
>  	/* Handle NACK from slave */
> @@ -179,7 +178,7 @@ static irqreturn_t owl_i2c_interrupt(int irq, void *_dev)
>  		/* Clear NACK error bit by writing "1" */
>  		owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_FIFOSTAT,
>  				   OWL_I2C_FIFOSTAT_RNB, true);
> -		goto stop;
> +		return;
>  	}
>  
>  	/* Handle bus error */
> @@ -189,7 +188,7 @@ static irqreturn_t owl_i2c_interrupt(int irq, void *_dev)
>  		/* Clear BUS error bit by writing "1" */
>  		owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_STAT,
>  				   OWL_I2C_STAT_BEB, true);
> -		goto stop;
> +		return;
>  	}
>  
>  	/* Handle FIFO read */
> @@ -207,13 +206,23 @@ static irqreturn_t owl_i2c_interrupt(int irq, void *_dev)
>  			       i2c_dev->base + OWL_I2C_REG_TXDAT);
>  		}
>  	}
> +}
> +
> +static irqreturn_t owl_i2c_interrupt(int irq, void *_dev)
> +{
> +	struct owl_i2c_dev *i2c_dev = _dev;
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&i2c_dev->lock, flags);
> +
> +	owl_i2c_xfer_data(i2c_dev);
>  
> -stop:
>  	/* Clear pending interrupts */
>  	owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_STAT,
>  			   OWL_I2C_STAT_IRQP, true);
>  
>  	complete_all(&i2c_dev->msg_complete);
> +
>  	spin_unlock_irqrestore(&i2c_dev->lock, flags);
>  
>  	return IRQ_HANDLED;
> @@ -241,8 +250,8 @@ static int owl_i2c_check_bus_busy(struct i2c_adapter *adap)
>  	return 0;
>  }
>  
> -static int owl_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
> -			       int num)
> +static int owl_i2c_xfer_common(struct i2c_adapter *adap, struct i2c_msg *msgs,
> +			       int num, bool atomic)
>  {
>  	struct owl_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
>  	struct i2c_msg *msg;
> @@ -286,11 +295,12 @@ static int owl_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
>  		goto err_exit;
>  	}
>  
> -	reinit_completion(&i2c_dev->msg_complete);
> +	if (!atomic)
> +		reinit_completion(&i2c_dev->msg_complete);
>  
> -	/* Enable I2C controller interrupt */
> +	/* Enable/disable I2C controller interrupt */
>  	owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_CTL,
> -			   OWL_I2C_CTL_IRQE, true);
> +			   OWL_I2C_CTL_IRQE, !atomic);
>  
>  	/*
>  	 * Select: FIFO enable, Master mode, Stop enable, Data count enable,
> @@ -358,20 +368,33 @@ static int owl_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
>  
>  	spin_unlock_irqrestore(&i2c_dev->lock, flags);
>  
> -	time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
> -						adap->timeout);
> +	if (atomic) {
> +		/* Wait for Command Execute Completed or NACK Error bits */
> +		ret = readl_poll_timeout_atomic(i2c_dev->base + OWL_I2C_REG_FIFOSTAT,
> +						val, val & (OWL_I2C_FIFOSTAT_CECB |
> +							    OWL_I2C_FIFOSTAT_RNB),
> +						10, OWL_I2C_TIMEOUT_MS * 1000);
> +	} else {
> +		time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
> +							adap->timeout);
> +		if (!time_left)
> +			ret = -ETIMEDOUT;
> +	}
>  
>  	spin_lock_irqsave(&i2c_dev->lock, flags);
> -	if (time_left == 0) {
> +
> +	if (ret) {
>  		dev_err(&adap->dev, "Transaction timed out\n");
>  		/* Send stop condition and release the bus */
>  		owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_CTL,
>  				   OWL_I2C_CTL_GBCC_STOP | OWL_I2C_CTL_RB,
>  				   true);
> -		ret = -ETIMEDOUT;
>  		goto err_exit;
>  	}
>  
> +	if (atomic)
> +		owl_i2c_xfer_data(i2c_dev);
> +
>  	ret = i2c_dev->err < 0 ? i2c_dev->err : num;
>  
>  err_exit:
> @@ -385,9 +408,22 @@ static int owl_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
>  	return ret;
>  }
>  
> +static int owl_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
> +			int num)
> +{
> +	return owl_i2c_xfer_common(adap, msgs, num, false);
> +}
> +
> +static int owl_i2c_xfer_atomic(struct i2c_adapter *adap,
> +			       struct i2c_msg *msgs, int num)
> +{
> +	return owl_i2c_xfer_common(adap, msgs, num, true);
> +}
> +
>  static const struct i2c_algorithm owl_i2c_algorithm = {
> -	.master_xfer    = owl_i2c_master_xfer,
> -	.functionality  = owl_i2c_func,
> +	.master_xfer	     = owl_i2c_xfer,
> +	.master_xfer_atomic  = owl_i2c_xfer_atomic,
> +	.functionality	     = owl_i2c_func,
>  };
>  
>  static const struct i2c_adapter_quirks owl_i2c_quirks = {
> -- 
> 2.28.0
>
Cristian Ciocaltea Oct. 12, 2020, 9:07 a.m. UTC | #2 
On Sun, Oct 11, 2020 at 07:39:20PM +0530, Manivannan Sadhasivam wrote:
> On Fri, Oct 09, 2020 at 12:44:40AM +0300, Cristian Ciocaltea wrote:
> > Atomic transfers are required to properly power off a machine through
> > an I2C controlled PMIC, such as the Actions Semi ATC260x series.
> > 
> > System shutdown may happen with interrupts being disabled and, as a
> > consequence, the kernel may hang if the driver does not support atomic
> > transfers.
> > 
> > This functionality is essentially implemented by polling the FIFO
> > Status register until either Command Execute Completed or NACK Error
> > bits are set.
> > 
> > Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
> 
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> 
> Thanks,
> Mani

Thanks for reviewing,
Cristi
Wolfram Sang Nov. 3, 2020, 8:57 p.m. UTC | #3 
On Fri, Oct 09, 2020 at 12:44:40AM +0300, Cristian Ciocaltea wrote:
> Atomic transfers are required to properly power off a machine through
> an I2C controlled PMIC, such as the Actions Semi ATC260x series.
> 
> System shutdown may happen with interrupts being disabled and, as a
> consequence, the kernel may hang if the driver does not support atomic
> transfers.
> 
> This functionality is essentially implemented by polling the FIFO
> Status register until either Command Execute Completed or NACK Error
> bits are set.
> 
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>

Applied to for-next, thanks!
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-owl.c b/drivers/i2c/busses/i2c-owl.c
index a163b8f308c1..547132768119 100644
--- a/drivers/i2c/busses/i2c-owl.c
+++ b/drivers/i2c/busses/i2c-owl.c
@@ -14,6 +14,7 @@ 
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 
@@ -76,6 +77,7 @@ 
 #define OWL_I2C_FIFOCTL_TFR	BIT(2)
 
 /* I2Cc_FIFOSTAT Bit Mask */
+#define OWL_I2C_FIFOSTAT_CECB	BIT(0)
 #define OWL_I2C_FIFOSTAT_RNB	BIT(1)
 #define OWL_I2C_FIFOSTAT_RFE	BIT(2)
 #define OWL_I2C_FIFOSTAT_TFF	BIT(5)
@@ -83,7 +85,8 @@ 
 #define OWL_I2C_FIFOSTAT_RFD	GENMASK(15, 8)
 
 /* I2C bus timeout */
-#define OWL_I2C_TIMEOUT		msecs_to_jiffies(4 * 1000)
+#define OWL_I2C_TIMEOUT_MS	(4 * 1000)
+#define OWL_I2C_TIMEOUT		msecs_to_jiffies(OWL_I2C_TIMEOUT_MS)
 
 #define OWL_I2C_MAX_RETRIES	50
 
@@ -161,15 +164,11 @@  static void owl_i2c_set_freq(struct owl_i2c_dev *i2c_dev)
 	writel(OWL_I2C_DIV_FACTOR(val), i2c_dev->base + OWL_I2C_REG_CLKDIV);
 }
 
-static irqreturn_t owl_i2c_interrupt(int irq, void *_dev)
+static void owl_i2c_xfer_data(struct owl_i2c_dev *i2c_dev)
 {
-	struct owl_i2c_dev *i2c_dev = _dev;
 	struct i2c_msg *msg = i2c_dev->msg;
-	unsigned long flags;
 	unsigned int stat, fifostat;
 
-	spin_lock_irqsave(&i2c_dev->lock, flags);
-
 	i2c_dev->err = 0;
 
 	/* Handle NACK from slave */
@@ -179,7 +178,7 @@  static irqreturn_t owl_i2c_interrupt(int irq, void *_dev)
 		/* Clear NACK error bit by writing "1" */
 		owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_FIFOSTAT,
 				   OWL_I2C_FIFOSTAT_RNB, true);
-		goto stop;
+		return;
 	}
 
 	/* Handle bus error */
@@ -189,7 +188,7 @@  static irqreturn_t owl_i2c_interrupt(int irq, void *_dev)
 		/* Clear BUS error bit by writing "1" */
 		owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_STAT,
 				   OWL_I2C_STAT_BEB, true);
-		goto stop;
+		return;
 	}
 
 	/* Handle FIFO read */
@@ -207,13 +206,23 @@  static irqreturn_t owl_i2c_interrupt(int irq, void *_dev)
 			       i2c_dev->base + OWL_I2C_REG_TXDAT);
 		}
 	}
+}
+
+static irqreturn_t owl_i2c_interrupt(int irq, void *_dev)
+{
+	struct owl_i2c_dev *i2c_dev = _dev;
+	unsigned long flags;
+
+	spin_lock_irqsave(&i2c_dev->lock, flags);
+
+	owl_i2c_xfer_data(i2c_dev);
 
-stop:
 	/* Clear pending interrupts */
 	owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_STAT,
 			   OWL_I2C_STAT_IRQP, true);
 
 	complete_all(&i2c_dev->msg_complete);
+
 	spin_unlock_irqrestore(&i2c_dev->lock, flags);
 
 	return IRQ_HANDLED;
@@ -241,8 +250,8 @@  static int owl_i2c_check_bus_busy(struct i2c_adapter *adap)
 	return 0;
 }
 
-static int owl_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
-			       int num)
+static int owl_i2c_xfer_common(struct i2c_adapter *adap, struct i2c_msg *msgs,
+			       int num, bool atomic)
 {
 	struct owl_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
 	struct i2c_msg *msg;
@@ -286,11 +295,12 @@  static int owl_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 		goto err_exit;
 	}
 
-	reinit_completion(&i2c_dev->msg_complete);
+	if (!atomic)
+		reinit_completion(&i2c_dev->msg_complete);
 
-	/* Enable I2C controller interrupt */
+	/* Enable/disable I2C controller interrupt */
 	owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_CTL,
-			   OWL_I2C_CTL_IRQE, true);
+			   OWL_I2C_CTL_IRQE, !atomic);
 
 	/*
 	 * Select: FIFO enable, Master mode, Stop enable, Data count enable,
@@ -358,20 +368,33 @@  static int owl_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 
 	spin_unlock_irqrestore(&i2c_dev->lock, flags);
 
-	time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
-						adap->timeout);
+	if (atomic) {
+		/* Wait for Command Execute Completed or NACK Error bits */
+		ret = readl_poll_timeout_atomic(i2c_dev->base + OWL_I2C_REG_FIFOSTAT,
+						val, val & (OWL_I2C_FIFOSTAT_CECB |
+							    OWL_I2C_FIFOSTAT_RNB),
+						10, OWL_I2C_TIMEOUT_MS * 1000);
+	} else {
+		time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
+							adap->timeout);
+		if (!time_left)
+			ret = -ETIMEDOUT;
+	}
 
 	spin_lock_irqsave(&i2c_dev->lock, flags);
-	if (time_left == 0) {
+
+	if (ret) {
 		dev_err(&adap->dev, "Transaction timed out\n");
 		/* Send stop condition and release the bus */
 		owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_CTL,
 				   OWL_I2C_CTL_GBCC_STOP | OWL_I2C_CTL_RB,
 				   true);
-		ret = -ETIMEDOUT;
 		goto err_exit;
 	}
 
+	if (atomic)
+		owl_i2c_xfer_data(i2c_dev);
+
 	ret = i2c_dev->err < 0 ? i2c_dev->err : num;
 
 err_exit:
@@ -385,9 +408,22 @@  static int owl_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	return ret;
 }
 
+static int owl_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+			int num)
+{
+	return owl_i2c_xfer_common(adap, msgs, num, false);
+}
+
+static int owl_i2c_xfer_atomic(struct i2c_adapter *adap,
+			       struct i2c_msg *msgs, int num)
+{
+	return owl_i2c_xfer_common(adap, msgs, num, true);
+}
+
 static const struct i2c_algorithm owl_i2c_algorithm = {
-	.master_xfer    = owl_i2c_master_xfer,
-	.functionality  = owl_i2c_func,
+	.master_xfer	     = owl_i2c_xfer,
+	.master_xfer_atomic  = owl_i2c_xfer_atomic,
+	.functionality	     = owl_i2c_func,
 };
 
 static const struct i2c_adapter_quirks owl_i2c_quirks = {