| Message ID | 20201104103622.595908-21-jacopo@jmondi.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | media: ov5647: Support RaspberryPi Camera Module v1 | expand |
Hi Jacopo On Wed, 4 Nov 2020 at 10:37, Jacopo Mondi <jacopo@jmondi.org> wrote: > > Store in the driver structure a pointer to the currently applied mode > and program a new one at s_stream(1) time only if it has changed. This patch is redundant as you've moved the power calls into s_stream, and you can't change mode whilst streaming. It made sense when s_power was independent, as s_power(1), set_mode, set_mode, set_mode, s_power(0) was valid and could result in the same register set being written multiple times for no gain. Dave > Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> > --- > drivers/media/i2c/ov5647.c | 15 ++++++++++++++- > 1 file changed, 14 insertions(+), 1 deletion(-) > > diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c > index 21983af55c23f..6e500fb548c74 100644 > --- a/drivers/media/i2c/ov5647.c > +++ b/drivers/media/i2c/ov5647.c > @@ -96,6 +96,7 @@ struct ov5647 { > bool clock_ncont; > struct v4l2_ctrl_handler ctrls; > const struct ov5647_mode *mode; > + const struct ov5647_mode *current_mode; > }; > > static inline struct ov5647 *to_sensor(struct v4l2_subdev *sd) > @@ -755,6 +756,9 @@ static int ov5647_set_mode(struct v4l2_subdev *sd) > u8 resetval, rdval; > int ret; > > + if (sensor->mode == sensor->current_mode) > + return 0; > + > ret = ov5647_read(sd, OV5647_SW_STANDBY, &rdval); > if (ret < 0) > return ret; > @@ -781,6 +785,8 @@ static int ov5647_set_mode(struct v4l2_subdev *sd) > return ret; > } > > + sensor->current_mode = sensor->mode; > + > return 0; > } > > @@ -819,6 +825,7 @@ static int ov5647_stream_on(struct v4l2_subdev *sd) > > static int ov5647_stream_off(struct v4l2_subdev *sd) > { > + struct ov5647 *sensor = to_sensor(sd); > int ret; > > ret = ov5647_write(sd, OV5647_REG_MIPI_CTRL00, MIPI_CTRL00_CLOCK_LANE_GATE | > @@ -830,7 +837,13 @@ static int ov5647_stream_off(struct v4l2_subdev *sd) > if (ret < 0) > return ret; > > - return ov5647_write(sd, OV5640_REG_PAD_OUT, 0x01); > + ret = ov5647_write(sd, OV5640_REG_PAD_OUT, 0x01); > + if (ret < 0) > + return ret; > + > + sensor->current_mode = NULL; > + > + return 0; > } > > static int set_sw_standby(struct v4l2_subdev *sd, bool standby) > -- > 2.29.1 >
Hi Dave, On Wed, Nov 04, 2020 at 12:20:26PM +0000, Dave Stevenson wrote: > Hi Jacopo > > On Wed, 4 Nov 2020 at 10:37, Jacopo Mondi <jacopo@jmondi.org> wrote: > > > > Store in the driver structure a pointer to the currently applied mode > > and program a new one at s_stream(1) time only if it has changed. > > This patch is redundant as you've moved the power calls into s_stream, > and you can't change mode whilst streaming. You're probably right, but I don't think the reason it's because you cannot s_ftm() while streaming, at least, not in the current implementation because ov5647_set_pad_fmt() doesn't actually perform any 'if (sensor->streaming) return -EBUSY;' and the core doesn't protect you against this (as far I can tell there's no 'streaming state' the core is aware of) Although the driver should probably reject s_fmt() during streaming and that's something I should add in v3? Anyway, you're right on this: the sensor gets powered on at every s_stream() now, so whatever mode is requested, it has to be programmed regardless. Thanks! j > > It made sense when s_power was independent, as s_power(1), set_mode, > set_mode, set_mode, s_power(0) was valid and could result in the same > register set being written multiple times for no gain. > > Dave > > > Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> > > --- > > drivers/media/i2c/ov5647.c | 15 ++++++++++++++- > > 1 file changed, 14 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c > > index 21983af55c23f..6e500fb548c74 100644 > > --- a/drivers/media/i2c/ov5647.c > > +++ b/drivers/media/i2c/ov5647.c > > @@ -96,6 +96,7 @@ struct ov5647 { > > bool clock_ncont; > > struct v4l2_ctrl_handler ctrls; > > const struct ov5647_mode *mode; > > + const struct ov5647_mode *current_mode; > > }; > > > > static inline struct ov5647 *to_sensor(struct v4l2_subdev *sd) > > @@ -755,6 +756,9 @@ static int ov5647_set_mode(struct v4l2_subdev *sd) > > u8 resetval, rdval; > > int ret; > > > > + if (sensor->mode == sensor->current_mode) > > + return 0; > > + > > ret = ov5647_read(sd, OV5647_SW_STANDBY, &rdval); > > if (ret < 0) > > return ret; > > @@ -781,6 +785,8 @@ static int ov5647_set_mode(struct v4l2_subdev *sd) > > return ret; > > } > > > > + sensor->current_mode = sensor->mode; > > + > > return 0; > > } > > > > @@ -819,6 +825,7 @@ static int ov5647_stream_on(struct v4l2_subdev *sd) > > > > static int ov5647_stream_off(struct v4l2_subdev *sd) > > { > > + struct ov5647 *sensor = to_sensor(sd); > > int ret; > > > > ret = ov5647_write(sd, OV5647_REG_MIPI_CTRL00, MIPI_CTRL00_CLOCK_LANE_GATE | > > @@ -830,7 +837,13 @@ static int ov5647_stream_off(struct v4l2_subdev *sd) > > if (ret < 0) > > return ret; > > > > - return ov5647_write(sd, OV5640_REG_PAD_OUT, 0x01); > > + ret = ov5647_write(sd, OV5640_REG_PAD_OUT, 0x01); > > + if (ret < 0) > > + return ret; > > + > > + sensor->current_mode = NULL; > > + > > + return 0; > > } > > > > static int set_sw_standby(struct v4l2_subdev *sd, bool standby) > > -- > > 2.29.1 > >
diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c index 21983af55c23f..6e500fb548c74 100644 --- a/drivers/media/i2c/ov5647.c +++ b/drivers/media/i2c/ov5647.c @@ -96,6 +96,7 @@ struct ov5647 { bool clock_ncont; struct v4l2_ctrl_handler ctrls; const struct ov5647_mode *mode; + const struct ov5647_mode *current_mode; }; static inline struct ov5647 *to_sensor(struct v4l2_subdev *sd) @@ -755,6 +756,9 @@ static int ov5647_set_mode(struct v4l2_subdev *sd) u8 resetval, rdval; int ret; + if (sensor->mode == sensor->current_mode) + return 0; + ret = ov5647_read(sd, OV5647_SW_STANDBY, &rdval); if (ret < 0) return ret; @@ -781,6 +785,8 @@ static int ov5647_set_mode(struct v4l2_subdev *sd) return ret; } + sensor->current_mode = sensor->mode; + return 0; } @@ -819,6 +825,7 @@ static int ov5647_stream_on(struct v4l2_subdev *sd) static int ov5647_stream_off(struct v4l2_subdev *sd) { + struct ov5647 *sensor = to_sensor(sd); int ret; ret = ov5647_write(sd, OV5647_REG_MIPI_CTRL00, MIPI_CTRL00_CLOCK_LANE_GATE | @@ -830,7 +837,13 @@ static int ov5647_stream_off(struct v4l2_subdev *sd) if (ret < 0) return ret; - return ov5647_write(sd, OV5640_REG_PAD_OUT, 0x01); + ret = ov5647_write(sd, OV5640_REG_PAD_OUT, 0x01); + if (ret < 0) + return ret; + + sensor->current_mode = NULL; + + return 0; } static int set_sw_standby(struct v4l2_subdev *sd, bool standby)
Store in the driver structure a pointer to the currently applied mode and program a new one at s_stream(1) time only if it has changed. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> --- drivers/media/i2c/ov5647.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)