| Message ID | 20201112215451.2606136-2-linus.walleij@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/3,v2] iio: accel: bmc150-accel: Add DT bindings | expand |
On Thu, 12 Nov 2020 22:54:50 +0100 Linus Walleij <linus.walleij@linaro.org> wrote: > This adds support for the BMA222 version of this sensor, > found in for example the Samsung GT-I9070 mobile phone. > > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Noticed something new this time... It doesn't really matter when adding this device as the wasted space is small, but we may end up adding more devices in future and this will get worse each time. Thanks, Jonathan > --- > ChangeLog v1->v2: > - None, resend with the other patches. > --- > drivers/iio/accel/bmc150-accel-core.c | 17 +++++++++++++++++ > drivers/iio/accel/bmc150-accel-i2c.c | 4 ++++ > drivers/iio/accel/bmc150-accel-spi.c | 2 ++ > drivers/iio/accel/bmc150-accel.h | 1 + > 4 files changed, 24 insertions(+) > > diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c > index 48435865fdaf..0dafe4052856 100644 > --- a/drivers/iio/accel/bmc150-accel-core.c > +++ b/drivers/iio/accel/bmc150-accel-core.c > @@ -5,6 +5,7 @@ > * - BMI055 > * - BMA255 > * - BMA250E > + * - BMA222 > * - BMA222E > * - BMA280 > * > @@ -1013,6 +1014,8 @@ static const struct iio_event_spec bmc150_accel_event = { > IIO_CHAN_SOFT_TIMESTAMP(3), \ > } > > +static const struct iio_chan_spec bma222_accel_channels[] = > + BMC150_ACCEL_CHANNELS(8); Why introduce an exact replica of the entry below it? I guess the compiler 'might' notice and squish these. It's common enough to have multiple device type entries point at an existing iio_chan_spec array. > static const struct iio_chan_spec bma222e_accel_channels[] = > BMC150_ACCEL_CHANNELS(8); > static const struct iio_chan_spec bma250e_accel_channels[] = > @@ -1063,6 +1066,20 @@ static const struct bmc150_accel_chip_info bmc150_accel_chip_info_tbl[] = { > {153277, BMC150_ACCEL_DEF_RANGE_8G}, > {306457, BMC150_ACCEL_DEF_RANGE_16G} }, > }, > + [bma222] = { > + .name = "BMA222", > + .chip_id = 0x03, > + .channels = bma222_accel_channels, > + .num_channels = ARRAY_SIZE(bma222_accel_channels), Just set these to bma222e_accel_channels > + /* > + * The datasheet page 17 says: > + * 15.6, 31.3, 62.5 and 125 mg per LSB. > + */ > + .scale_table = { {156000, BMC150_ACCEL_DEF_RANGE_2G}, > + {313000, BMC150_ACCEL_DEF_RANGE_4G}, > + {625000, BMC150_ACCEL_DEF_RANGE_8G}, > + {1250000, BMC150_ACCEL_DEF_RANGE_16G} }, > + }, > [bma222e] = { > .name = "BMA222E", > .chip_id = 0xF8, > diff --git a/drivers/iio/accel/bmc150-accel-i2c.c b/drivers/iio/accel/bmc150-accel-i2c.c > index 06021c8685a7..bba92dd33179 100644 > --- a/drivers/iio/accel/bmc150-accel-i2c.c > +++ b/drivers/iio/accel/bmc150-accel-i2c.c > @@ -5,6 +5,7 @@ > * - BMI055 > * - BMA255 > * - BMA250E > + * - BMA222 > * - BMA222E > * - BMA280 > * > @@ -54,6 +55,7 @@ static const struct acpi_device_id bmc150_accel_acpi_match[] = { > {"BMI055A", bmi055}, > {"BMA0255", bma255}, > {"BMA250E", bma250e}, > + {"BMA222", bma222}, > {"BMA222E", bma222e}, > {"BMA0280", bma280}, > {"BOSC0200"}, > @@ -66,6 +68,7 @@ static const struct i2c_device_id bmc150_accel_id[] = { > {"bmi055_accel", bmi055}, > {"bma255", bma255}, > {"bma250e", bma250e}, > + {"bma222", bma222}, > {"bma222e", bma222e}, > {"bma280", bma280}, > {} > @@ -78,6 +81,7 @@ static const struct of_device_id bmc150_accel_of_match[] = { > { .compatible = "bosch,bmi055_accel" }, > { .compatible = "bosch,bma255" }, > { .compatible = "bosch,bma250e" }, > + { .compatible = "bosch,bma222" }, > { .compatible = "bosch,bma222e" }, > { .compatible = "bosch,bma280" }, > { }, > diff --git a/drivers/iio/accel/bmc150-accel-spi.c b/drivers/iio/accel/bmc150-accel-spi.c > index 2a8c311d6f5a..74a8aee4f612 100644 > --- a/drivers/iio/accel/bmc150-accel-spi.c > +++ b/drivers/iio/accel/bmc150-accel-spi.c > @@ -39,6 +39,7 @@ static const struct acpi_device_id bmc150_accel_acpi_match[] = { > {"BMI055A", bmi055}, > {"BMA0255", bma255}, > {"BMA250E", bma250e}, > + {"BMA222", bma222}, > {"BMA222E", bma222e}, > {"BMA0280", bma280}, > { }, > @@ -50,6 +51,7 @@ static const struct spi_device_id bmc150_accel_id[] = { > {"bmi055_accel", bmi055}, > {"bma255", bma255}, > {"bma250e", bma250e}, > + {"bma222", bma222}, > {"bma222e", bma222e}, > {"bma280", bma280}, > {} > diff --git a/drivers/iio/accel/bmc150-accel.h b/drivers/iio/accel/bmc150-accel.h > index ae6118ae11b1..f5427103574d 100644 > --- a/drivers/iio/accel/bmc150-accel.h > +++ b/drivers/iio/accel/bmc150-accel.h > @@ -9,6 +9,7 @@ enum { > bmi055, > bma255, > bma250e, > + bma222, > bma222e, > bma280, > };
diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c index 48435865fdaf..0dafe4052856 100644 --- a/drivers/iio/accel/bmc150-accel-core.c +++ b/drivers/iio/accel/bmc150-accel-core.c @@ -5,6 +5,7 @@ * - BMI055 * - BMA255 * - BMA250E + * - BMA222 * - BMA222E * - BMA280 * @@ -1013,6 +1014,8 @@ static const struct iio_event_spec bmc150_accel_event = { IIO_CHAN_SOFT_TIMESTAMP(3), \ } +static const struct iio_chan_spec bma222_accel_channels[] = + BMC150_ACCEL_CHANNELS(8); static const struct iio_chan_spec bma222e_accel_channels[] = BMC150_ACCEL_CHANNELS(8); static const struct iio_chan_spec bma250e_accel_channels[] = @@ -1063,6 +1066,20 @@ static const struct bmc150_accel_chip_info bmc150_accel_chip_info_tbl[] = { {153277, BMC150_ACCEL_DEF_RANGE_8G}, {306457, BMC150_ACCEL_DEF_RANGE_16G} }, }, + [bma222] = { + .name = "BMA222", + .chip_id = 0x03, + .channels = bma222_accel_channels, + .num_channels = ARRAY_SIZE(bma222_accel_channels), + /* + * The datasheet page 17 says: + * 15.6, 31.3, 62.5 and 125 mg per LSB. + */ + .scale_table = { {156000, BMC150_ACCEL_DEF_RANGE_2G}, + {313000, BMC150_ACCEL_DEF_RANGE_4G}, + {625000, BMC150_ACCEL_DEF_RANGE_8G}, + {1250000, BMC150_ACCEL_DEF_RANGE_16G} }, + }, [bma222e] = { .name = "BMA222E", .chip_id = 0xF8, diff --git a/drivers/iio/accel/bmc150-accel-i2c.c b/drivers/iio/accel/bmc150-accel-i2c.c index 06021c8685a7..bba92dd33179 100644 --- a/drivers/iio/accel/bmc150-accel-i2c.c +++ b/drivers/iio/accel/bmc150-accel-i2c.c @@ -5,6 +5,7 @@ * - BMI055 * - BMA255 * - BMA250E + * - BMA222 * - BMA222E * - BMA280 * @@ -54,6 +55,7 @@ static const struct acpi_device_id bmc150_accel_acpi_match[] = { {"BMI055A", bmi055}, {"BMA0255", bma255}, {"BMA250E", bma250e}, + {"BMA222", bma222}, {"BMA222E", bma222e}, {"BMA0280", bma280}, {"BOSC0200"}, @@ -66,6 +68,7 @@ static const struct i2c_device_id bmc150_accel_id[] = { {"bmi055_accel", bmi055}, {"bma255", bma255}, {"bma250e", bma250e}, + {"bma222", bma222}, {"bma222e", bma222e}, {"bma280", bma280}, {} @@ -78,6 +81,7 @@ static const struct of_device_id bmc150_accel_of_match[] = { { .compatible = "bosch,bmi055_accel" }, { .compatible = "bosch,bma255" }, { .compatible = "bosch,bma250e" }, + { .compatible = "bosch,bma222" }, { .compatible = "bosch,bma222e" }, { .compatible = "bosch,bma280" }, { }, diff --git a/drivers/iio/accel/bmc150-accel-spi.c b/drivers/iio/accel/bmc150-accel-spi.c index 2a8c311d6f5a..74a8aee4f612 100644 --- a/drivers/iio/accel/bmc150-accel-spi.c +++ b/drivers/iio/accel/bmc150-accel-spi.c @@ -39,6 +39,7 @@ static const struct acpi_device_id bmc150_accel_acpi_match[] = { {"BMI055A", bmi055}, {"BMA0255", bma255}, {"BMA250E", bma250e}, + {"BMA222", bma222}, {"BMA222E", bma222e}, {"BMA0280", bma280}, { }, @@ -50,6 +51,7 @@ static const struct spi_device_id bmc150_accel_id[] = { {"bmi055_accel", bmi055}, {"bma255", bma255}, {"bma250e", bma250e}, + {"bma222", bma222}, {"bma222e", bma222e}, {"bma280", bma280}, {} diff --git a/drivers/iio/accel/bmc150-accel.h b/drivers/iio/accel/bmc150-accel.h index ae6118ae11b1..f5427103574d 100644 --- a/drivers/iio/accel/bmc150-accel.h +++ b/drivers/iio/accel/bmc150-accel.h @@ -9,6 +9,7 @@ enum { bmi055, bma255, bma250e, + bma222, bma222e, bma280, };
This adds support for the BMA222 version of this sensor, found in for example the Samsung GT-I9070 mobile phone. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v1->v2: - None, resend with the other patches. --- drivers/iio/accel/bmc150-accel-core.c | 17 +++++++++++++++++ drivers/iio/accel/bmc150-accel-i2c.c | 4 ++++ drivers/iio/accel/bmc150-accel-spi.c | 2 ++ drivers/iio/accel/bmc150-accel.h | 1 + 4 files changed, 24 insertions(+)