| Message ID | fd692095f2cdda5a99327f57e69c34a4ffce232f.1605625579.git.lorenzo@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | st_lsm6dsx: add vdd-vddio power regulator | expand |
On Tue, 17 Nov 2020 16:11:38 +0100 Lorenzo Bianconi <lorenzo@kernel.org> wrote: > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> > --- > Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > index 7c6742d3e992..bc3448df9647 100644 > --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > @@ -20,6 +20,10 @@ Required properties: > - reg: i2c address of the sensor / spi cs line > > Optional properties: > +- vdd-supply: an optional regulator that needs to be on to provide VDD > + power to the sensor. > +- vddio-supply: an optional regulator that needs to be on to provide the > + VDD IO power to the sensor. > - st,drdy-int-pin: the pin on the package that will be used to signal > "data ready" (valid values: 1 or 2). > - st,pullups : enable/disable internal i2c controller pullup resistors. Hi Lorenzo, Please could you rebase this on top of https://lore.kernel.org/linux-iio/20201031184854.745828-13-jic23@kernel.org/ Which does a yaml conversion of this file. I'm working my way through backlog of those this week so will pick that up at some point very soon. I'll resend a v2 of some patches in those series, but only those where there are outstanding comments that aren't trivial. (Rob's acked most with a few requested tweaks). Thanks, Jonathan
> On Tue, 17 Nov 2020 16:11:38 +0100 > Lorenzo Bianconi <lorenzo@kernel.org> wrote: > > > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> > > --- > > Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 4 ++++ > > 1 file changed, 4 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > > index 7c6742d3e992..bc3448df9647 100644 > > --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > > +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > > @@ -20,6 +20,10 @@ Required properties: > > - reg: i2c address of the sensor / spi cs line > > > > Optional properties: > > +- vdd-supply: an optional regulator that needs to be on to provide VDD > > + power to the sensor. > > +- vddio-supply: an optional regulator that needs to be on to provide the > > + VDD IO power to the sensor. > > - st,drdy-int-pin: the pin on the package that will be used to signal > > "data ready" (valid values: 1 or 2). > > - st,pullups : enable/disable internal i2c controller pullup resistors. > > Hi Lorenzo, > > Please could you rebase this on top of > https://lore.kernel.org/linux-iio/20201031184854.745828-13-jic23@kernel.org/ > > Which does a yaml conversion of this file. Hi Jonathan, sure, no worries. I was quite sure the yaml conversion was merged but then I discovered it was not :) I will post v2 soon. Regards, Lorenzo > > I'm working my way through backlog of those this week so will pick that up > at some point very soon. > > I'll resend a v2 of some patches in those series, but only those where there > are outstanding comments that aren't trivial. > > (Rob's acked most with a few requested tweaks). > > Thanks, > > Jonathan
diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt index 7c6742d3e992..bc3448df9647 100644 --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt @@ -20,6 +20,10 @@ Required properties: - reg: i2c address of the sensor / spi cs line Optional properties: +- vdd-supply: an optional regulator that needs to be on to provide VDD + power to the sensor. +- vddio-supply: an optional regulator that needs to be on to provide the + VDD IO power to the sensor. - st,drdy-int-pin: the pin on the package that will be used to signal "data ready" (valid values: 1 or 2). - st,pullups : enable/disable internal i2c controller pullup resistors.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> --- Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 4 ++++ 1 file changed, 4 insertions(+)