| Message ID | 20201119173754.4125257-1-guro@fb.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | bpf: switch to memcg-based memory accounting | expand |
On Mon, Nov 23, 2020 at 02:30:09PM +0100, Daniel Borkmann wrote: > On 11/19/20 6:37 PM, Roman Gushchin wrote: > > Currently bpf is using the memlock rlimit for the memory accounting. > > This approach has its downsides and over time has created a significant > > amount of problems: > > > > 1) The limit is per-user, but because most bpf operations are performed > > as root, the limit has a little value. > > > > 2) It's hard to come up with a specific maximum value. Especially because > > the counter is shared with non-bpf users (e.g. memlock() users). > > Any specific value is either too low and creates false failures > > or too high and useless. > > > > 3) Charging is not connected to the actual memory allocation. Bpf code > > should manually calculate the estimated cost and precharge the counter, > > and then take care of uncharging, including all fail paths. > > It adds to the code complexity and makes it easy to leak a charge. > > > > 4) There is no simple way of getting the current value of the counter. > > We've used drgn for it, but it's far from being convenient. > > > > 5) Cryptic -EPERM is returned on exceeding the limit. Libbpf even had > > a function to "explain" this case for users. > > > > In order to overcome these problems let's switch to the memcg-based > > memory accounting of bpf objects. With the recent addition of the percpu > > memory accounting, now it's possible to provide a comprehensive accounting > > of the memory used by bpf programs and maps. > > > > This approach has the following advantages: > > 1) The limit is per-cgroup and hierarchical. It's way more flexible and allows > > a better control over memory usage by different workloads. Of course, it > > requires enabled cgroups and kernel memory accounting and properly configured > > cgroup tree, but it's a default configuration for a modern Linux system. > > > > 2) The actual memory consumption is taken into account. It happens automatically > > on the allocation time if __GFP_ACCOUNT flags is passed. Uncharging is also > > performed automatically on releasing the memory. So the code on the bpf side > > becomes simpler and safer. > > > > 3) There is a simple way to get the current value and statistics. > > > > In general, if a process performs a bpf operation (e.g. creates or updates > > a map), it's memory cgroup is charged. However map updates performed from > > an interrupt context are charged to the memory cgroup which contained > > the process, which created the map. > > > > Providing a 1:1 replacement for the rlimit-based memory accounting is > > a non-goal of this patchset. Users and memory cgroups are completely > > orthogonal, so it's not possible even in theory. > > Memcg-based memory accounting requires a properly configured cgroup tree > > to be actually useful. However, it's the way how the memory is managed > > on a modern Linux system. Hi Daniel! > > The cover letter here only describes the advantages of this series, but leaves > out discussion of the disadvantages. They definitely must be part of the series > to provide a clear description of the semantic changes to readers. Honestly, I don't see them as disadvantages. Cgroups are basic units in which resource control limits/guarantees/accounting are expressed. If there are no cgroups created and configured in the system, it's obvious (maybe only to me) that no limits are applied. Users (rlimits) are to some extent similar units, but they do not provide a comprehensive resource control system. Some parts are deprecated (like rss limits), some parts are just missing. Aside from bpf nobody uses users to control the memory as a physical resource. It simple doesn't work (and never did). If somebody expects that a non-privileged user can't harm the system by depleting it's memory (and other resources), it's simple not correct. There are multiple ways for doing it. Accounting or not accounting bpf maps doesn't really change anything. If we see them not as a real security mechanism, but as a way to prevent "mistakes", which can harm the system, it's to some extent legit. The question is only if it justifies the amount of problems we had with these limits. Switching to memory cgroups, which are the way how the memory control is expressed, IMO doesn't need an additional justification. During the last year I remember 2 or 3 times when various people (internally in Fb and in public mailing lists) were asking why bpf memory is not accounted to memory cgroups. I think it's basically expected these days. I'll try to make more obvious that we're switching from users to cgroups and describe the consequences of it on an unconfigured system. I'll update the cover. > Last time we > discussed them, they were i) no mem limits in general on unprivileged users when > memory cgroups was not configured in the kernel, and ii) no mem limits by default > if not configured in the cgroup specifically. > Did we made any progress on these > in the meantime? How do we want to address them? What is the concrete justification > to not address them? I don't see how they can and should be addressed. Cgroups are the way how the resource consumption of a group of processes can be limited. If there are no cgroups configured, it means all resources are available to everyone. Maybe a user wants to use the whole memory for a bpf map? Why not? Do you have any specific use case in your mind? If you see a real value in the old system (I don't), which can justify an additional complexity of keeping them both in a working state, we can discuss this option too. We can make a switch in few steps, if you think it's too risky. > > Also I wonder what are the risk of regressions here, for example, if an existing > orchestrator has configured memory cgroup limits that are tailored to the application's > needs.. now, with kernel upgrade BPF will start to interfere, e.g. if a BPF program > attached to cgroups (e.g. connect/sendmsg/recvmsg or general cgroup skb egress hook) > starts charging to the process' memcg due to map updates? Well, if somebody has a tight memory limit and large bpf map(s), they can see a "regression". However the kernel memory usage and accounting implementation details vary from a version to a version, so nobody should expect that limits once set will work forever. If for some strange reason it'll create a critical problem, as a workaround it's possible to disable the kernel memory accounting as a whole (via a boot option). Actually, it seems that the usefulness of strict limits is generally limited, because it's hard to get and assign any specific value. They are always either too relaxed (and have no value), either too strict (and causing production issues). Memory cgroups are generally moving towards soft limits and protections. But it's a separate theme... Thanks!
Currently bpf is using the memlock rlimit for the memory accounting. This approach has its downsides and over time has created a significant amount of problems: 1) The limit is per-user, but because most bpf operations are performed as root, the limit has a little value. 2) It's hard to come up with a specific maximum value. Especially because the counter is shared with non-bpf users (e.g. memlock() users). Any specific value is either too low and creates false failures or too high and useless. 3) Charging is not connected to the actual memory allocation. Bpf code should manually calculate the estimated cost and precharge the counter, and then take care of uncharging, including all fail paths. It adds to the code complexity and makes it easy to leak a charge. 4) There is no simple way of getting the current value of the counter. We've used drgn for it, but it's far from being convenient. 5) Cryptic -EPERM is returned on exceeding the limit. Libbpf even had a function to "explain" this case for users. In order to overcome these problems let's switch to the memcg-based memory accounting of bpf objects. With the recent addition of the percpu memory accounting, now it's possible to provide a comprehensive accounting of the memory used by bpf programs and maps. This approach has the following advantages: 1) The limit is per-cgroup and hierarchical. It's way more flexible and allows a better control over memory usage by different workloads. Of course, it requires enabled cgroups and kernel memory accounting and properly configured cgroup tree, but it's a default configuration for a modern Linux system. 2) The actual memory consumption is taken into account. It happens automatically on the allocation time if __GFP_ACCOUNT flags is passed. Uncharging is also performed automatically on releasing the memory. So the code on the bpf side becomes simpler and safer. 3) There is a simple way to get the current value and statistics. In general, if a process performs a bpf operation (e.g. creates or updates a map), it's memory cgroup is charged. However map updates performed from an interrupt context are charged to the memory cgroup which contained the process, which created the map. Providing a 1:1 replacement for the rlimit-based memory accounting is a non-goal of this patchset. Users and memory cgroups are completely orthogonal, so it's not possible even in theory. Memcg-based memory accounting requires a properly configured cgroup tree to be actually useful. However, it's the way how the memory is managed on a modern Linux system. The patchset consists of the following parts: 1) 4 mm patches, which are already in the mm tree, but are required to avoid a regression (otherwise vmallocs cannot be mapped to userspace). 2) memcg-based accounting for various bpf objects: progs and maps 3) removal of the rlimit-based accounting 4) removal of rlimit adjustments in userspace samples First 4 patches are not supposed to be merged via the bpf tree. I'm including them to make sure bpf tests will pass. v7: - introduced bpf_map_kmalloc_node() and bpf_map_alloc_percpu(), by Alexei - switched allocations made from an interrupt context to new helpers, by Daniel - rebase and minor fixes v6: - rebased to the latest version of the remote charging API - fixed signatures, added acks v5: - rebased to the latest version of the remote charging API - implemented kmem accounting from an interrupt context, by Shakeel - rebased to latest changes in mm allowed to map vmallocs to userspace - fixed a build issue in kselftests, by Alexei - fixed a use-after-free bug in bpf_map_free_deferred() - added bpf line info coverage, by Shakeel - split bpf map charging preparations into a separate patch v4: - covered allocations made from an interrupt context, by Daniel - added some clarifications to the cover letter v3: - droped the userspace part for further discussions/refinements, by Andrii and Song v2: - fixed build issue, caused by the remaining rlimit-based accounting for sockhash maps Roman Gushchin (34): mm: memcontrol: use helpers to read page's memcg data mm: memcontrol/slab: use helpers to access slab page's memcg_data mm: introduce page memcg flags mm: convert page kmemcg type to a page memcg flag bpf: memcg-based memory accounting for bpf progs bpf: prepare for memcg-based memory accounting for bpf maps bpf: memcg-based memory accounting for bpf maps bpf: refine memcg-based memory accounting for arraymap maps bpf: refine memcg-based memory accounting for cpumap maps bpf: memcg-based memory accounting for cgroup storage maps bpf: refine memcg-based memory accounting for devmap maps bpf: refine memcg-based memory accounting for hashtab maps bpf: memcg-based memory accounting for lpm_trie maps bpf: memcg-based memory accounting for bpf ringbuffer bpf: memcg-based memory accounting for bpf local storage maps bpf: refine memcg-based memory accounting for sockmap and sockhash maps bpf: refine memcg-based memory accounting for xskmap maps bpf: eliminate rlimit-based memory accounting for arraymap maps bpf: eliminate rlimit-based memory accounting for bpf_struct_ops maps bpf: eliminate rlimit-based memory accounting for cpumap maps bpf: eliminate rlimit-based memory accounting for cgroup storage maps bpf: eliminate rlimit-based memory accounting for devmap maps bpf: eliminate rlimit-based memory accounting for hashtab maps bpf: eliminate rlimit-based memory accounting for lpm_trie maps bpf: eliminate rlimit-based memory accounting for queue_stack_maps maps bpf: eliminate rlimit-based memory accounting for reuseport_array maps bpf: eliminate rlimit-based memory accounting for bpf ringbuffer bpf: eliminate rlimit-based memory accounting for sockmap and sockhash maps bpf: eliminate rlimit-based memory accounting for stackmap maps bpf: eliminate rlimit-based memory accounting for xskmap maps bpf: eliminate rlimit-based memory accounting for bpf local storage maps bpf: eliminate rlimit-based memory accounting infra for bpf maps bpf: eliminate rlimit-based memory accounting for bpf progs bpf: samples: do not touch RLIMIT_MEMLOCK fs/buffer.c | 2 +- fs/iomap/buffered-io.c | 2 +- include/linux/bpf.h | 49 ++-- include/linux/memcontrol.h | 215 ++++++++++++++++- include/linux/mm.h | 22 -- include/linux/mm_types.h | 5 +- include/linux/page-flags.h | 11 +- include/trace/events/writeback.h | 2 +- kernel/bpf/arraymap.c | 30 +-- kernel/bpf/bpf_local_storage.c | 23 +- kernel/bpf/bpf_struct_ops.c | 19 +- kernel/bpf/core.c | 22 +- kernel/bpf/cpumap.c | 39 ++- kernel/bpf/devmap.c | 25 +- kernel/bpf/hashtab.c | 34 +-- kernel/bpf/local_storage.c | 43 +--- kernel/bpf/lpm_trie.c | 20 +- kernel/bpf/queue_stack_maps.c | 16 +- kernel/bpf/reuseport_array.c | 12 +- kernel/bpf/ringbuf.c | 33 +-- kernel/bpf/stackmap.c | 16 +- kernel/bpf/syscall.c | 228 +++++++----------- kernel/fork.c | 7 +- mm/debug.c | 4 +- mm/huge_memory.c | 4 +- mm/memcontrol.c | 139 +++++------ mm/page_alloc.c | 8 +- mm/page_io.c | 6 +- mm/slab.h | 38 +-- mm/workingset.c | 2 +- net/core/sock_map.c | 42 +--- net/xdp/xskmap.c | 16 +- samples/bpf/map_perf_test_user.c | 6 - samples/bpf/offwaketime_user.c | 6 - samples/bpf/sockex2_user.c | 2 - samples/bpf/sockex3_user.c | 2 - samples/bpf/spintest_user.c | 6 - samples/bpf/syscall_tp_user.c | 2 - samples/bpf/task_fd_query_user.c | 5 - samples/bpf/test_lru_dist.c | 3 - samples/bpf/test_map_in_map_user.c | 6 - samples/bpf/test_overhead_user.c | 2 - samples/bpf/trace_event_user.c | 2 - samples/bpf/tracex2_user.c | 6 - samples/bpf/tracex3_user.c | 6 - samples/bpf/tracex4_user.c | 6 - samples/bpf/tracex5_user.c | 3 - samples/bpf/tracex6_user.c | 3 - samples/bpf/xdp1_user.c | 6 - samples/bpf/xdp_adjust_tail_user.c | 6 - samples/bpf/xdp_monitor_user.c | 5 - samples/bpf/xdp_redirect_cpu_user.c | 6 - samples/bpf/xdp_redirect_map_user.c | 6 - samples/bpf/xdp_redirect_user.c | 6 - samples/bpf/xdp_router_ipv4_user.c | 6 - samples/bpf/xdp_rxq_info_user.c | 6 - samples/bpf/xdp_sample_pkts_user.c | 6 - samples/bpf/xdp_tx_iptunnel_user.c | 6 - samples/bpf/xdpsock_user.c | 7 - .../selftests/bpf/progs/bpf_iter_bpf_map.c | 2 +- .../selftests/bpf/progs/map_ptr_kern.c | 7 - 61 files changed, 519 insertions(+), 756 deletions(-)