| Message ID | 20201127152947.376-1-rasmus.villemoes@prevas.dk (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 122541f2b10897b08f7f7e6db5f1eb693e51f0a1 |
| Headers | show |
| Series | spi: fsl: fix use of spisel_boot signal on MPC8309 | expand |
On Fri, 27 Nov 2020 16:29:47 +0100, Rasmus Villemoes wrote: > Commit 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors") > broke the use of the SPISEL_BOOT signal as a chip select on the > MPC8309. > > pdata->max_chipselect, which becomes master->num_chipselect, must be > initialized to take into account the possibility that there's one more > chip select in use than the number of GPIO chip selects. Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next Thanks! [1/1] spi: fsl: fix use of spisel_boot signal on MPC8309 commit: 122541f2b10897b08f7f7e6db5f1eb693e51f0a1 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index 299e9870cf58..9494257e1c33 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -716,10 +716,11 @@ static int of_fsl_spi_probe(struct platform_device *ofdev) type = fsl_spi_get_type(&ofdev->dev); if (type == TYPE_FSL) { struct fsl_spi_platform_data *pdata = dev_get_platdata(dev); + bool spisel_boot = false; #if IS_ENABLED(CONFIG_FSL_SOC) struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata); - bool spisel_boot = of_property_read_bool(np, "fsl,spisel_boot"); + spisel_boot = of_property_read_bool(np, "fsl,spisel_boot"); if (spisel_boot) { pinfo->immr_spi_cs = ioremap(get_immrbase() + IMMR_SPI_CS_OFFSET, 4); if (!pinfo->immr_spi_cs) @@ -734,10 +735,14 @@ static int of_fsl_spi_probe(struct platform_device *ofdev) * supported on the GRLIB variant. */ ret = gpiod_count(dev, "cs"); - if (ret <= 0) + if (ret < 0) + ret = 0; + if (ret == 0 && !spisel_boot) { pdata->max_chipselect = 1; - else + } else { + pdata->max_chipselect = ret + spisel_boot; pdata->cs_control = fsl_spi_cs_control; + } } ret = of_address_to_resource(np, 0, &mem);
Commit 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors") broke the use of the SPISEL_BOOT signal as a chip select on the MPC8309. pdata->max_chipselect, which becomes master->num_chipselect, must be initialized to take into account the possibility that there's one more chip select in use than the number of GPIO chip selects. Cc: stable@vger.kernel.org # v5.4+ Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Linus Walleij <linus.walleij@linaro.org> Fixes: 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors") Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> --- Longer-term, it might be nicer to introduce a very trivial "gpiochip" with nr_gpios=1, which doesn't really implement neither the "general-purpose" nor the "input" part of the gpio acronym. That's how this ended up being handled in U-Boot, for example: https://github.com/u-boot/u-boot/commit/3fb22bc2f825ea1b3326edc5b32d711a759a265f But for -stable, this is much simpler. drivers/spi/spi-fsl-spi.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)