| Message ID | 20201129142145.1526022-2-lkundrak@v3.sk (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add driver for power button on Dell Wyse 3020 | expand |
On Sun, 29 Nov 2020 15:21:44 +0100, Lubomir Rintel wrote: > Add binding document for the Dell Wyse 3020 a.k.a. "Ariel" Power Button. > > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> > Reviewed-by: Rob Herring <robh@kernel.org> > > --- > Changes since v1: > - Collect Rob's R-b > > .../bindings/input/ariel-pwrbutton.yaml | 53 +++++++++++++++++++ > 1 file changed, 53 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml: 'oneOf' conditional failed, one must be fixed: 'unevaluatedProperties' is a required property 'additionalProperties' is a required property /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml: ignoring, error in schema: warning: no schema found in file: ./Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml See https://patchwork.ozlabs.org/patch/1407831 The base for the patch is generally the last rc1. Any dependencies should be noted. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml new file mode 100644 index 0000000000000..e022d36c48d23 --- /dev/null +++ b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/ariel-pwrbutton.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dell Wyse 3020 a.k.a. "Ariel" Power Button + +maintainers: + - Lubomir Rintel <lkundrak@v3.sk> + +description: | + The ENE Embedded Controller on the Ariel board has an interface to the + SPI bus that is capable of sending keyboard and mouse data. A single + power button is attached to it. This binding describes this + configuration. + +allOf: + - $ref: input.yaml# + +properties: + compatible: + items: + - const: dell,wyse-ariel-ec-input + - const: ene,kb3930-input + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + power-button@0 { + compatible = "dell,wyse-ariel-ec-input", "ene,kb3930-input"; + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <60 IRQ_TYPE_EDGE_RISING>; + spi-max-frequency = <33000000>; + }; + };