| Message ID | 1607085261-25255-3-git-send-email-claudiu.beznea@microchip.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | net: macb: add support for sama7g5 | expand |
| Context | Check | Description |
|---|---|---|
| netdev/cover_letter | success | Link |
| netdev/fixes_present | success | Link |
| netdev/patch_count | success | Link |
| netdev/tree_selection | success | Guessed tree name to be net-next |
| netdev/subject_prefix | success | Link |
| netdev/source_inline | success | Was 0 now: 0 |
| netdev/verify_signedoff | success | Link |
| netdev/module_param | success | Was 0 now: 0 |
| netdev/build_32bit | success | Errors and warnings before: 57 this patch: 57 |
| netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
| netdev/verify_fixes | success | Link |
| netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 56 lines checked |
| netdev/build_allmodconfig_warn | success | Errors and warnings before: 57 this patch: 57 |
| netdev/header_inline | success | Link |
| netdev/stable | success | Stable not CCed |
On Fri, Dec 04, 2020 at 02:34:16PM +0200, Claudiu Beznea wrote: > SAMA7G5's ethernet IPs TX clock could be provided by its generic clock or > by the external clock provided by the PHY. The internal IP logic divides > properly this clock depending on the link speed. The patch adds a new > capability so that macb_set_tx_clock() to not be called for IPs having > this capability (the clock rate, in case of generic clock, is set at the > boot time via device tree and the driver only enables it). > > Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Andrew
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h index 7daabffe4318..769694c7f86c 100644 --- a/drivers/net/ethernet/cadence/macb.h +++ b/drivers/net/ethernet/cadence/macb.h @@ -699,6 +699,7 @@ #define MACB_CAPS_GEM_HAS_PTP 0x00000040 #define MACB_CAPS_BD_RD_PREFETCH 0x00000080 #define MACB_CAPS_NEEDS_RSTONUBR 0x00000100 +#define MACB_CAPS_CLK_HW_CHG 0x04000000 #define MACB_CAPS_MACB_IS_EMAC 0x08000000 #define MACB_CAPS_FIFO_MODE 0x10000000 #define MACB_CAPS_GIGABIT_MODE_AVAILABLE 0x20000000 diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 6d46153a7c4b..b23e986ac6dc 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -460,15 +460,14 @@ static void macb_init_buffers(struct macb *bp) /** * macb_set_tx_clk() - Set a clock to a new frequency - * @clk: Pointer to the clock to change + * @bp: pointer to struct macb * @speed: New frequency in Hz - * @dev: Pointer to the struct net_device */ -static void macb_set_tx_clk(struct clk *clk, int speed, struct net_device *dev) +static void macb_set_tx_clk(struct macb *bp, int speed) { long ferr, rate, rate_rounded; - if (!clk) + if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG)) return; switch (speed) { @@ -485,7 +484,7 @@ static void macb_set_tx_clk(struct clk *clk, int speed, struct net_device *dev) return; } - rate_rounded = clk_round_rate(clk, rate); + rate_rounded = clk_round_rate(bp->tx_clk, rate); if (rate_rounded < 0) return; @@ -495,11 +494,12 @@ static void macb_set_tx_clk(struct clk *clk, int speed, struct net_device *dev) ferr = abs(rate_rounded - rate); ferr = DIV_ROUND_UP(ferr, rate / 100000); if (ferr > 5) - netdev_warn(dev, "unable to generate target frequency: %ld Hz\n", + netdev_warn(bp->dev, + "unable to generate target frequency: %ld Hz\n", rate); - if (clk_set_rate(clk, rate_rounded)) - netdev_err(dev, "adjusting tx_clk failed.\n"); + if (clk_set_rate(bp->tx_clk, rate_rounded)) + netdev_err(bp->dev, "adjusting tx_clk failed.\n"); } static void macb_validate(struct phylink_config *config, @@ -751,7 +751,7 @@ static void macb_mac_link_up(struct phylink_config *config, if (rx_pause) ctrl |= MACB_BIT(PAE); - macb_set_tx_clk(bp->tx_clk, speed, ndev); + macb_set_tx_clk(bp, speed); /* Initialize rings & buffers as clearing MACB_BIT(TE) in link down * cleared the pipeline and control registers.
SAMA7G5's ethernet IPs TX clock could be provided by its generic clock or by the external clock provided by the PHY. The internal IP logic divides properly this clock depending on the link speed. The patch adds a new capability so that macb_set_tx_clock() to not be called for IPs having this capability (the clock rate, in case of generic clock, is set at the boot time via device tree and the driver only enables it). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> --- drivers/net/ethernet/cadence/macb.h | 1 + drivers/net/ethernet/cadence/macb_main.c | 18 +++++++++--------- 2 files changed, 10 insertions(+), 9 deletions(-)