| Message ID | 20201207090013.14145-1-troy_lee@aspeedtech.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v4,1/3] dt-bindings: edac: aspeed-sdram-edac: Add ast2400/ast2600 support | expand |
On Mon, Dec 07, 2020 at 05:00:11PM +0800, Troy Lee wrote: > Adding Aspeed AST2400 and AST2600 binding for edac driver. > > Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> > Acked-by: Joel Stanley <joel@jms.id.au> > --- > .../devicetree/bindings/edac/aspeed-sdram-edac.txt | 9 ++++++--- > 1 file changed, 6 insertions(+), 3 deletions(-) All 3 applied, thanks.
diff --git a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt index 6a0f3d90d682..8ca9e0a049d8 100644 --- a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt +++ b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt @@ -1,6 +1,6 @@ -Aspeed AST2500 SoC EDAC node +Aspeed BMC SoC EDAC node -The Aspeed AST2500 SoC supports DDR3 and DDR4 memory with and without ECC (error +The Aspeed BMC SoC supports DDR3 and DDR4 memory with and without ECC (error correction check). The memory controller supports SECDED (single bit error correction, double bit @@ -11,7 +11,10 @@ Note, the bootloader must configure ECC mode in the memory controller. Required properties: -- compatible: should be "aspeed,ast2500-sdram-edac" +- compatible: should be one of + - "aspeed,ast2400-sdram-edac" + - "aspeed,ast2500-sdram-edac" + - "aspeed,ast2600-sdram-edac" - reg: sdram controller register set should be <0x1e6e0000 0x174> - interrupts: should be AVIC interrupt #0