diff mbox series

[v3,07/11] dt-bindings: phy: convert MIP DSI PHY binding to YAML schema

Message ID 20201118082126.42701-7-chunfeng.yun@mediatek.com (mailing list archive)
State Superseded
Headers show
Series [v3,01/11] dt-bindings: usb: convert usb-device.txt to YAML schema | expand

Commit Message

Chunfeng Yun Nov. 18, 2020, 8:21 a.m. UTC 
Convert MIPI DSI PHY binding to YAML schema mediatek,dsi-phy.yaml

Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v3: new patch
---
 .../display/mediatek/mediatek,dsi.txt         | 18 +---
 .../bindings/phy/mediatek,dsi-phy.yaml        | 83 +++++++++++++++++++
 2 files changed, 84 insertions(+), 17 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml

Comments

Chun-Kuang Hu Nov. 19, 2020, 11:38 p.m. UTC | #1 
Hi, Chunfeng:

Chunfeng Yun <chunfeng.yun@mediatek.com> 於 2020年11月18日 週三 下午4:21寫道：
>
> Convert MIPI DSI PHY binding to YAML schema mediatek,dsi-phy.yaml
>
> Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
> v3: new patch
> ---
>  .../display/mediatek/mediatek,dsi.txt         | 18 +---
>  .../bindings/phy/mediatek,dsi-phy.yaml        | 83 +++++++++++++++++++
>  2 files changed, 84 insertions(+), 17 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> index f06f24d405a5..8238a86686be 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> @@ -22,23 +22,7 @@ Required properties:
>  MIPI TX Configuration Module
>  ============================
>
> -The MIPI TX configuration module controls the MIPI D-PHY.
> -
> -Required properties:
> -- compatible: "mediatek,<chip>-mipi-tx"
> -- the supported chips are mt2701, 7623, mt8173 and mt8183.
> -- reg: Physical base address and length of the controller's registers
> -- clocks: PLL reference clock
> -- clock-output-names: name of the output clock line to the DSI encoder
> -- #clock-cells: must be <0>;
> -- #phy-cells: must be <0>.
> -
> -Optional properties:
> -- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
> -                                                  the step is 200.
> -- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
> -               unspecified default values shall be used.
> -- nvmem-cell-names: Should be "calibration-data"
> +See phy/mediatek,dsi-phy.yaml
>
>  Example:
>
> diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> new file mode 100644
> index 000000000000..87f8df251ab0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> @@ -0,0 +1,83 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2020 MediaTek
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/mediatek,dsi-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek MIPI Display Serial Interface (DSI) PHY binding
> +
> +maintainers:
> +  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
> +  - Chunfeng Yun <chunfeng.yun@mediatek.com>

Please add Philipp Zabel because he is Mediatek DRM driver maintainer.

DRM DRIVERS FOR MEDIATEK
M: Chun-Kuang Hu <chunkuang.hu@kernel.org>
M: Philipp Zabel <p.zabel@pengutronix.de>
L: dri-devel@lists.freedesktop.org
S: Supported
F: Documentation/devicetree/bindings/display/mediatek/

> +
> +description: The MIPI DSI PHY supports up to 4-lane output.
> +
> +properties:
> +  $nodename:
> +    pattern: "^dsi-phy@[0-9a-f]+$"
> +
> +  compatible:
> +    enum:
> +      - mediatek,mt2701-mipi-tx
> +      - mediatek,mt7623-mipi-tx
> +      - mediatek,mt8173-mipi-tx

Add mediatek,mt8183-mipi-tx

Regards,
Chun-Kuang.

> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: PLL reference clock
> +
> +  clock-output-names:
> +    maxItems: 1
> +
> +  "#phy-cells":
> +    const: 0
> +
> +  "#clock-cells":
> +    const: 0
> +
> +  nvmem-cells:
> +    maxItems: 1
> +    description: A phandle to the calibration data provided by a nvmem device,
> +      if unspecified, default values shall be used.
> +
> +  nvmem-cell-names:
> +    items:
> +      - const: calibration-data
> +
> +  drive-strength-microamp:
> +    description: adjust driving current, the step is 200.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    minimum: 2000
> +    maximum: 6000
> +    default: 4600
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-output-names
> +  - "#phy-cells"
> +  - "#clock-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/mt8173-clk.h>
> +    dsi-phy@10215000 {
> +        compatible = "mediatek,mt8173-mipi-tx";
> +        reg = <0x10215000 0x1000>;
> +        clocks = <&clk26m>;
> +        clock-output-names = "mipi_tx0_pll";
> +        drive-strength-microamp = <4000>;
> +        nvmem-cells= <&mipi_tx_calibration>;
> +        nvmem-cell-names = "calibration-data";
> +        #clock-cells = <0>;
> +        #phy-cells = <0>;
> +    };
> +
> +...
> --
> 2.18.0
>
Chunfeng Yun Nov. 20, 2020, 2:22 a.m. UTC | #2 
On Fri, 2020-11-20 at 07:38 +0800, Chun-Kuang Hu wrote:
> Hi, Chunfeng:
> 
> Chunfeng Yun <chunfeng.yun@mediatek.com> 於 2020年11月18日 週三 下午4:21寫道：
> >
> > Convert MIPI DSI PHY binding to YAML schema mediatek,dsi-phy.yaml
> >
> > Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> > v3: new patch
> > ---
> >  .../display/mediatek/mediatek,dsi.txt         | 18 +---
> >  .../bindings/phy/mediatek,dsi-phy.yaml        | 83 +++++++++++++++++++
> >  2 files changed, 84 insertions(+), 17 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> > index f06f24d405a5..8238a86686be 100644
> > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> > @@ -22,23 +22,7 @@ Required properties:
> >  MIPI TX Configuration Module
> >  ============================
> >
> > -The MIPI TX configuration module controls the MIPI D-PHY.
> > -
> > -Required properties:
> > -- compatible: "mediatek,<chip>-mipi-tx"
> > -- the supported chips are mt2701, 7623, mt8173 and mt8183.
> > -- reg: Physical base address and length of the controller's registers
> > -- clocks: PLL reference clock
> > -- clock-output-names: name of the output clock line to the DSI encoder
> > -- #clock-cells: must be <0>;
> > -- #phy-cells: must be <0>.
> > -
> > -Optional properties:
> > -- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
> > -                                                  the step is 200.
> > -- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
> > -               unspecified default values shall be used.
> > -- nvmem-cell-names: Should be "calibration-data"
> > +See phy/mediatek,dsi-phy.yaml
> >
> >  Example:
> >
> > diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> > new file mode 100644
> > index 000000000000..87f8df251ab0
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> > @@ -0,0 +1,83 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +# Copyright (c) 2020 MediaTek
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/phy/mediatek,dsi-phy.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MediaTek MIPI Display Serial Interface (DSI) PHY binding
> > +
> > +maintainers:
> > +  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
> > +  - Chunfeng Yun <chunfeng.yun@mediatek.com>
> 
> Please add Philipp Zabel because he is Mediatek DRM driver maintainer.
Ok
> 
> DRM DRIVERS FOR MEDIATEK
> M: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> M: Philipp Zabel <p.zabel@pengutronix.de>
> L: dri-devel@lists.freedesktop.org
> S: Supported
> F: Documentation/devicetree/bindings/display/mediatek/
> 
> > +
> > +description: The MIPI DSI PHY supports up to 4-lane output.
> > +
> > +properties:
> > +  $nodename:
> > +    pattern: "^dsi-phy@[0-9a-f]+$"
> > +
> > +  compatible:
> > +    enum:
> > +      - mediatek,mt2701-mipi-tx
> > +      - mediatek,mt7623-mipi-tx
> > +      - mediatek,mt8173-mipi-tx
> 
> Add mediatek,mt8183-mipi-tx
Ok, will add it

Thanks

> 
> Regards,
> Chun-Kuang.
> 
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: PLL reference clock
> > +
> > +  clock-output-names:
> > +    maxItems: 1
> > +
> > +  "#phy-cells":
> > +    const: 0
> > +
> > +  "#clock-cells":
> > +    const: 0
> > +
> > +  nvmem-cells:
> > +    maxItems: 1
> > +    description: A phandle to the calibration data provided by a nvmem device,
> > +      if unspecified, default values shall be used.
> > +
> > +  nvmem-cell-names:
> > +    items:
> > +      - const: calibration-data
> > +
> > +  drive-strength-microamp:
> > +    description: adjust driving current, the step is 200.
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    minimum: 2000
> > +    maximum: 6000
> > +    default: 4600
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - clock-output-names
> > +  - "#phy-cells"
> > +  - "#clock-cells"
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/mt8173-clk.h>
> > +    dsi-phy@10215000 {
> > +        compatible = "mediatek,mt8173-mipi-tx";
> > +        reg = <0x10215000 0x1000>;
> > +        clocks = <&clk26m>;
> > +        clock-output-names = "mipi_tx0_pll";
> > +        drive-strength-microamp = <4000>;
> > +        nvmem-cells= <&mipi_tx_calibration>;
> > +        nvmem-cell-names = "calibration-data";
> > +        #clock-cells = <0>;
> > +        #phy-cells = <0>;
> > +    };
> > +
> > +...
> > --
> > 2.18.0
> >
Rob Herring Dec. 7, 2020, 9:19 p.m. UTC | #3 
On Wed, Nov 18, 2020 at 04:21:22PM +0800, Chunfeng Yun wrote:
> Convert MIPI DSI PHY binding to YAML schema mediatek,dsi-phy.yaml
> 
> Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
> v3: new patch
> ---
>  .../display/mediatek/mediatek,dsi.txt         | 18 +---
>  .../bindings/phy/mediatek,dsi-phy.yaml        | 83 +++++++++++++++++++
>  2 files changed, 84 insertions(+), 17 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> index f06f24d405a5..8238a86686be 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> @@ -22,23 +22,7 @@ Required properties:
>  MIPI TX Configuration Module
>  ============================
>  
> -The MIPI TX configuration module controls the MIPI D-PHY.
> -
> -Required properties:
> -- compatible: "mediatek,<chip>-mipi-tx"
> -- the supported chips are mt2701, 7623, mt8173 and mt8183.
> -- reg: Physical base address and length of the controller's registers
> -- clocks: PLL reference clock
> -- clock-output-names: name of the output clock line to the DSI encoder
> -- #clock-cells: must be <0>;
> -- #phy-cells: must be <0>.
> -
> -Optional properties:
> -- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
> -						   the step is 200.
> -- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
> -               unspecified default values shall be used.
> -- nvmem-cell-names: Should be "calibration-data"
> +See phy/mediatek,dsi-phy.yaml
>  
>  Example:
>  
> diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> new file mode 100644
> index 000000000000..87f8df251ab0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> @@ -0,0 +1,83 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2020 MediaTek
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/mediatek,dsi-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek MIPI Display Serial Interface (DSI) PHY binding
> +
> +maintainers:
> +  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
> +  - Chunfeng Yun <chunfeng.yun@mediatek.com>
> +
> +description: The MIPI DSI PHY supports up to 4-lane output.
> +
> +properties:
> +  $nodename:
> +    pattern: "^dsi-phy@[0-9a-f]+$"
> +
> +  compatible:
> +    enum:
> +      - mediatek,mt2701-mipi-tx
> +      - mediatek,mt7623-mipi-tx
> +      - mediatek,mt8173-mipi-tx
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: PLL reference clock
> +
> +  clock-output-names:
> +    maxItems: 1
> +
> +  "#phy-cells":
> +    const: 0
> +
> +  "#clock-cells":
> +    const: 0
> +
> +  nvmem-cells:
> +    maxItems: 1
> +    description: A phandle to the calibration data provided by a nvmem device,
> +      if unspecified, default values shall be used.
> +
> +  nvmem-cell-names:
> +    items:
> +      - const: calibration-data
> +
> +  drive-strength-microamp:
> +    description: adjust driving current, the step is 200.

multipleOf: 200

> +    $ref: /schemas/types.yaml#/definitions/uint32

Can drop. Standard unit suffixes have a type already.

> +    minimum: 2000
> +    maximum: 6000
> +    default: 4600
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-output-names
> +  - "#phy-cells"
> +  - "#clock-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/mt8173-clk.h>
> +    dsi-phy@10215000 {
> +        compatible = "mediatek,mt8173-mipi-tx";
> +        reg = <0x10215000 0x1000>;
> +        clocks = <&clk26m>;
> +        clock-output-names = "mipi_tx0_pll";
> +        drive-strength-microamp = <4000>;
> +        nvmem-cells= <&mipi_tx_calibration>;
> +        nvmem-cell-names = "calibration-data";
> +        #clock-cells = <0>;
> +        #phy-cells = <0>;
> +    };
> +
> +...
> -- 
> 2.18.0
>
Chunfeng Yun Dec. 8, 2020, 2 a.m. UTC | #4 
On Mon, 2020-12-07 at 15:19 -0600, Rob Herring wrote:
> On Wed, Nov 18, 2020 at 04:21:22PM +0800, Chunfeng Yun wrote:
> > Convert MIPI DSI PHY binding to YAML schema mediatek,dsi-phy.yaml
> > 
> > Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> > v3: new patch
> > ---
> >  .../display/mediatek/mediatek,dsi.txt         | 18 +---
> >  .../bindings/phy/mediatek,dsi-phy.yaml        | 83 +++++++++++++++++++
> >  2 files changed, 84 insertions(+), 17 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> > index f06f24d405a5..8238a86686be 100644
> > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> > @@ -22,23 +22,7 @@ Required properties:
> >  MIPI TX Configuration Module
> >  ============================
> >  
> > -The MIPI TX configuration module controls the MIPI D-PHY.
> > -
> > -Required properties:
> > -- compatible: "mediatek,<chip>-mipi-tx"
> > -- the supported chips are mt2701, 7623, mt8173 and mt8183.
> > -- reg: Physical base address and length of the controller's registers
> > -- clocks: PLL reference clock
> > -- clock-output-names: name of the output clock line to the DSI encoder
> > -- #clock-cells: must be <0>;
> > -- #phy-cells: must be <0>.
> > -
> > -Optional properties:
> > -- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
> > -						   the step is 200.
> > -- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
> > -               unspecified default values shall be used.
> > -- nvmem-cell-names: Should be "calibration-data"
> > +See phy/mediatek,dsi-phy.yaml
> >  
> >  Example:
> >  
> > diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> > new file mode 100644
> > index 000000000000..87f8df251ab0
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> > @@ -0,0 +1,83 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +# Copyright (c) 2020 MediaTek
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/phy/mediatek,dsi-phy.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MediaTek MIPI Display Serial Interface (DSI) PHY binding
> > +
> > +maintainers:
> > +  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
> > +  - Chunfeng Yun <chunfeng.yun@mediatek.com>
> > +
> > +description: The MIPI DSI PHY supports up to 4-lane output.
> > +
> > +properties:
> > +  $nodename:
> > +    pattern: "^dsi-phy@[0-9a-f]+$"
> > +
> > +  compatible:
> > +    enum:
> > +      - mediatek,mt2701-mipi-tx
> > +      - mediatek,mt7623-mipi-tx
> > +      - mediatek,mt8173-mipi-tx
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: PLL reference clock
> > +
> > +  clock-output-names:
> > +    maxItems: 1
> > +
> > +  "#phy-cells":
> > +    const: 0
> > +
> > +  "#clock-cells":
> > +    const: 0
> > +
> > +  nvmem-cells:
> > +    maxItems: 1
> > +    description: A phandle to the calibration data provided by a nvmem device,
> > +      if unspecified, default values shall be used.
> > +
> > +  nvmem-cell-names:
> > +    items:
> > +      - const: calibration-data
> > +
> > +  drive-strength-microamp:
> > +    description: adjust driving current, the step is 200.
> 
> multipleOf: 200
Got it.
> 
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> 
> Can drop. Standard unit suffixes have a type already.
Ok, thanks a lot

> 
> > +    minimum: 2000
> > +    maximum: 6000
> > +    default: 4600
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - clock-output-names
> > +  - "#phy-cells"
> > +  - "#clock-cells"
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/mt8173-clk.h>
> > +    dsi-phy@10215000 {
> > +        compatible = "mediatek,mt8173-mipi-tx";
> > +        reg = <0x10215000 0x1000>;
> > +        clocks = <&clk26m>;
> > +        clock-output-names = "mipi_tx0_pll";
> > +        drive-strength-microamp = <4000>;
> > +        nvmem-cells= <&mipi_tx_calibration>;
> > +        nvmem-cell-names = "calibration-data";
> > +        #clock-cells = <0>;
> > +        #phy-cells = <0>;
> > +    };
> > +
> > +...
> > -- 
> > 2.18.0
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index f06f24d405a5..8238a86686be 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -22,23 +22,7 @@  Required properties:
 MIPI TX Configuration Module
 ============================
 
-The MIPI TX configuration module controls the MIPI D-PHY.
-
-Required properties:
-- compatible: "mediatek,<chip>-mipi-tx"
-- the supported chips are mt2701, 7623, mt8173 and mt8183.
-- reg: Physical base address and length of the controller's registers
-- clocks: PLL reference clock
-- clock-output-names: name of the output clock line to the DSI encoder
-- #clock-cells: must be <0>;
-- #phy-cells: must be <0>.
-
-Optional properties:
-- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
-						   the step is 200.
-- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
-               unspecified default values shall be used.
-- nvmem-cell-names: Should be "calibration-data"
+See phy/mediatek,dsi-phy.yaml
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
new file mode 100644
index 000000000000..87f8df251ab0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
@@ -0,0 +1,83 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,dsi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MIPI Display Serial Interface (DSI) PHY binding
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+description: The MIPI DSI PHY supports up to 4-lane output.
+
+properties:
+  $nodename:
+    pattern: "^dsi-phy@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - mediatek,mt2701-mipi-tx
+      - mediatek,mt7623-mipi-tx
+      - mediatek,mt8173-mipi-tx
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PLL reference clock
+
+  clock-output-names:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  "#clock-cells":
+    const: 0
+
+  nvmem-cells:
+    maxItems: 1
+    description: A phandle to the calibration data provided by a nvmem device,
+      if unspecified, default values shall be used.
+
+  nvmem-cell-names:
+    items:
+      - const: calibration-data
+
+  drive-strength-microamp:
+    description: adjust driving current, the step is 200.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 2000
+    maximum: 6000
+    default: 4600
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+  - "#phy-cells"
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    dsi-phy@10215000 {
+        compatible = "mediatek,mt8173-mipi-tx";
+        reg = <0x10215000 0x1000>;
+        clocks = <&clk26m>;
+        clock-output-names = "mipi_tx0_pll";
+        drive-strength-microamp = <4000>;
+        nvmem-cells= <&mipi_tx_calibration>;
+        nvmem-cell-names = "calibration-data";
+        #clock-cells = <0>;
+        #phy-cells = <0>;
+    };
+
+...