| Message ID | 20201124093828.307709-1-colin.king@canonical.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [next] scsi: pm8001: remove space in a debug message | expand |
On Tue, 2020-11-24 at 09:38 +0000, Colin King wrote: > From: Colin Ian King <colin.king@canonical.com> > > There are two words that need separating with a space in a > pm8001_dbg message. Fix it. > > Signed-off-by: Colin Ian King <colin.king@canonical.com> > --- > drivers/scsi/pm8001/pm8001_hwi.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/scsi/pm8001/pm8001_hwi.c > b/drivers/scsi/pm8001/pm8001_hwi.c > index 08d6cc9b50db..c8d4d87c5473 100644 > --- a/drivers/scsi/pm8001/pm8001_hwi.c > +++ b/drivers/scsi/pm8001/pm8001_hwi.c > @@ -1031,7 +1031,7 @@ pm8001_chip_soft_rst(struct pm8001_hba_info > *pm8001_ha) > regVal = pm8001_cr32(pm8001_ha, 2, > GSM_WRITE_DATA_PARITY_CHECK); > pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, > regVal3); > pm8001_dbg(pm8001_ha, INIT, > - "GSM 0x700048 - Write Data Parity Check Enableis set > to = 0x%x\n", > + "GSM 0x700048 - Write Data Parity Check Enable is > set to = 0x%x\n", > pm8001_cr32(pm8001_ha, 2, > GSM_WRITE_DATA_PARITY_CHECK)); > > /* step 13: bring the IOP and AAP1 out of reset */ Reviewed-by: Ewan D. Milne <emilne@redhat.com>
On Tue, Nov 24, 2020 at 10:38 AM Colin King <colin.king@canonical.com> wrote: > > From: Colin Ian King <colin.king@canonical.com> > > There are two words that need separating with a space in a > pm8001_dbg message. Fix it. > > Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Thanks > --- > drivers/scsi/pm8001/pm8001_hwi.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c > index 08d6cc9b50db..c8d4d87c5473 100644 > --- a/drivers/scsi/pm8001/pm8001_hwi.c > +++ b/drivers/scsi/pm8001/pm8001_hwi.c > @@ -1031,7 +1031,7 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha) > regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK); > pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, regVal3); > pm8001_dbg(pm8001_ha, INIT, > - "GSM 0x700048 - Write Data Parity Check Enableis set to = 0x%x\n", > + "GSM 0x700048 - Write Data Parity Check Enable is set to = 0x%x\n", > pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK)); > > /* step 13: bring the IOP and AAP1 out of reset */ > -- > 2.29.2 >
Colin, > There are two words that need separating with a space in a > pm8001_dbg message. Fix it. Applied to 5.11/scsi-staging, thanks!
On Tue, 24 Nov 2020 09:38:28 +0000, Colin King wrote: > There are two words that need separating with a space in a > pm8001_dbg message. Fix it. Applied to 5.11/scsi-queue, thanks! [1/1] scsi: pm8001: remove space in a debug message https://git.kernel.org/mkp/scsi/c/c6131854e28a
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 08d6cc9b50db..c8d4d87c5473 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -1031,7 +1031,7 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha) regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK); pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, regVal3); pm8001_dbg(pm8001_ha, INIT, - "GSM 0x700048 - Write Data Parity Check Enableis set to = 0x%x\n", + "GSM 0x700048 - Write Data Parity Check Enable is set to = 0x%x\n", pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK)); /* step 13: bring the IOP and AAP1 out of reset */