| Message ID | 20201209122051.26151-1-o.rempel@pengutronix.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v1] ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup | expand |
On Wed, Dec 9, 2020 at 9:21 AM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > Remove board specific PHY fixup introduced by commit: > > | 709bc0657fe6f9f5 ("ARM: imx6ul: add fec MAC refrence clock and phy fixup init") > > This fixup addresses boards with a specific configuration: a KSZ8081RNA > PHY with attached clock source to XI (Pin 8) of the PHY equal to 50MHz. > > For the KSZ8081RND PHY, the meaning of the reg 0x1F bit 7 is different > (compared to the KSZ8081RNA). A set bit means: > > - KSZ8081RNA: clock input to XI (Pin 8) is 50MHz for RMII > - KSZ8081RND: clock input to XI (Pin 8) is 25MHz for RMII > > In other configurations, for example a KSZ8081RND PHY or a KSZ8081RNA > with 25Mhz clock source, the PHY will glitch and stay in not recoverable > state. > > It is not possible to detect the clock source frequency of the PHY. And > it is not possible to automatically detect KSZ8081 PHY variant - both > have same PHY ID. It is not possible to overwrite the fixup > configuration by providing proper device tree description. The only way > is to remove this fixup. > > If this patch breaks network functionality on your board, fix it by > adding PHY node with following properties: > > ethernet-phy@x { > ... > micrel,led-mode = <1>; > clocks = <&clks IMX6UL_CLK_ENET_REF>; > clock-names = "rmii-ref"; > ... > }; > > The board which was referred in the initial patch is already fixed. > See: arch/arm/boot/dts/imx6ul-14x14-evk.dtsi > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
Hi, On 12/9/20 1:20 PM, Oleksij Rempel wrote: > Remove board specific PHY fixup introduced by commit: > > | 709bc0657fe6f9f5 ("ARM: imx6ul: add fec MAC refrence clock and phy fixup init") > > This fixup addresses boards with a specific configuration: a KSZ8081RNA > PHY with attached clock source to XI (Pin 8) of the PHY equal to 50MHz. > > For the KSZ8081RND PHY, the meaning of the reg 0x1F bit 7 is different > (compared to the KSZ8081RNA). A set bit means: > > - KSZ8081RNA: clock input to XI (Pin 8) is 50MHz for RMII > - KSZ8081RND: clock input to XI (Pin 8) is 25MHz for RMII OPOS6UL has a KSZ80801RNB. On this PHY variant, bit 7 of reg 0x1F means: 1: RMII 50MHz clock mode; clock input to XI (Pin 9) is 50MHz 0: RMII 25MHz clock mode; clock input to XI (Pin 9) is 25MHz > > In other configurations, for example a KSZ8081RND PHY or a KSZ8081RNA > with 25Mhz clock source, the PHY will glitch and stay in not recoverable > state. > > It is not possible to detect the clock source frequency of the PHY. And > it is not possible to automatically detect KSZ8081 PHY variant - both > have same PHY ID. It is not possible to overwrite the fixup > configuration by providing proper device tree description. The only way > is to remove this fixup. > > If this patch breaks network functionality on your board, fix it by > adding PHY node with following properties: > > ethernet-phy@x { > ... > micrel,led-mode = <1>; > clocks = <&clks IMX6UL_CLK_ENET_REF>; > clock-names = "rmii-ref"; > ... > }; On OPOS6UL, this fix do fixes network breakage introduced by this patch. So, for OPOS6UL, Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> > > The board which was referred in the initial patch is already fixed. > See: arch/arm/boot/dts/imx6ul-14x14-evk.dtsi > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> > --- > arch/arm/mach-imx/mach-imx6ul.c | 21 --------------------- > 1 file changed, 21 deletions(-) > > diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c > index e018e716735f..eabcd35c01a5 100644 > --- a/arch/arm/mach-imx/mach-imx6ul.c > +++ b/arch/arm/mach-imx/mach-imx6ul.c > @@ -27,30 +27,9 @@ static void __init imx6ul_enet_clk_init(void) > pr_err("failed to find fsl,imx6ul-iomux-gpr regmap\n"); > } > > -static int ksz8081_phy_fixup(struct phy_device *dev) > -{ > - if (dev && dev->interface == PHY_INTERFACE_MODE_MII) { > - phy_write(dev, 0x1f, 0x8110); > - phy_write(dev, 0x16, 0x201); > - } else if (dev && dev->interface == PHY_INTERFACE_MODE_RMII) { > - phy_write(dev, 0x1f, 0x8190); > - phy_write(dev, 0x16, 0x202); > - } > - > - return 0; > -} > - > -static void __init imx6ul_enet_phy_init(void) > -{ > - if (IS_BUILTIN(CONFIG_PHYLIB)) > - phy_register_fixup_for_uid(PHY_ID_KSZ8081, MICREL_PHY_ID_MASK, > - ksz8081_phy_fixup); > -} > - > static inline void imx6ul_enet_init(void) > { > imx6ul_enet_clk_init(); > - imx6ul_enet_phy_init(); > } > > static void __init imx6ul_init_machine(void) >
On Wed, Dec 09, 2020 at 01:20:51PM +0100, Oleksij Rempel wrote: > Remove board specific PHY fixup introduced by commit: > > | 709bc0657fe6f9f5 ("ARM: imx6ul: add fec MAC refrence clock and phy fixup init") > > This fixup addresses boards with a specific configuration: a KSZ8081RNA > PHY with attached clock source to XI (Pin 8) of the PHY equal to 50MHz. > > For the KSZ8081RND PHY, the meaning of the reg 0x1F bit 7 is different > (compared to the KSZ8081RNA). A set bit means: > > - KSZ8081RNA: clock input to XI (Pin 8) is 50MHz for RMII > - KSZ8081RND: clock input to XI (Pin 8) is 25MHz for RMII > > In other configurations, for example a KSZ8081RND PHY or a KSZ8081RNA > with 25Mhz clock source, the PHY will glitch and stay in not recoverable > state. > > It is not possible to detect the clock source frequency of the PHY. And > it is not possible to automatically detect KSZ8081 PHY variant - both > have same PHY ID. It is not possible to overwrite the fixup > configuration by providing proper device tree description. The only way > is to remove this fixup. > > If this patch breaks network functionality on your board, fix it by > adding PHY node with following properties: > > ethernet-phy@x { > ... > micrel,led-mode = <1>; > clocks = <&clks IMX6UL_CLK_ENET_REF>; > clock-names = "rmii-ref"; > ... > }; > > The board which was referred in the initial patch is already fixed. > See: arch/arm/boot/dts/imx6ul-14x14-evk.dtsi > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Applied, thanks.
diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c index e018e716735f..eabcd35c01a5 100644 --- a/arch/arm/mach-imx/mach-imx6ul.c +++ b/arch/arm/mach-imx/mach-imx6ul.c @@ -27,30 +27,9 @@ static void __init imx6ul_enet_clk_init(void) pr_err("failed to find fsl,imx6ul-iomux-gpr regmap\n"); } -static int ksz8081_phy_fixup(struct phy_device *dev) -{ - if (dev && dev->interface == PHY_INTERFACE_MODE_MII) { - phy_write(dev, 0x1f, 0x8110); - phy_write(dev, 0x16, 0x201); - } else if (dev && dev->interface == PHY_INTERFACE_MODE_RMII) { - phy_write(dev, 0x1f, 0x8190); - phy_write(dev, 0x16, 0x202); - } - - return 0; -} - -static void __init imx6ul_enet_phy_init(void) -{ - if (IS_BUILTIN(CONFIG_PHYLIB)) - phy_register_fixup_for_uid(PHY_ID_KSZ8081, MICREL_PHY_ID_MASK, - ksz8081_phy_fixup); -} - static inline void imx6ul_enet_init(void) { imx6ul_enet_clk_init(); - imx6ul_enet_phy_init(); } static void __init imx6ul_init_machine(void)
Remove board specific PHY fixup introduced by commit: | 709bc0657fe6f9f5 ("ARM: imx6ul: add fec MAC refrence clock and phy fixup init") This fixup addresses boards with a specific configuration: a KSZ8081RNA PHY with attached clock source to XI (Pin 8) of the PHY equal to 50MHz. For the KSZ8081RND PHY, the meaning of the reg 0x1F bit 7 is different (compared to the KSZ8081RNA). A set bit means: - KSZ8081RNA: clock input to XI (Pin 8) is 50MHz for RMII - KSZ8081RND: clock input to XI (Pin 8) is 25MHz for RMII In other configurations, for example a KSZ8081RND PHY or a KSZ8081RNA with 25Mhz clock source, the PHY will glitch and stay in not recoverable state. It is not possible to detect the clock source frequency of the PHY. And it is not possible to automatically detect KSZ8081 PHY variant - both have same PHY ID. It is not possible to overwrite the fixup configuration by providing proper device tree description. The only way is to remove this fixup. If this patch breaks network functionality on your board, fix it by adding PHY node with following properties: ethernet-phy@x { ... micrel,led-mode = <1>; clocks = <&clks IMX6UL_CLK_ENET_REF>; clock-names = "rmii-ref"; ... }; The board which was referred in the initial patch is already fixed. See: arch/arm/boot/dts/imx6ul-14x14-evk.dtsi Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/mach-imx/mach-imx6ul.c | 21 --------------------- 1 file changed, 21 deletions(-)