| Message ID | X9MbMja+TEfbKkmJ@google.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Input: cyapa - do not call input_device_enabled from power mode handler | expand |
On 11.12.2020 08:09, Dmitry Torokhov wrote: > Input device's user counter is supposed to be accessed only while holding > input->mutex. Commit d69f0a43c677 ("Input: use input_device_enabled()") > recently switched cyapa to using the dedicated API and it uncovered the > fact that cyapa driver violated this constraint. > > This patch removes checks whether the input device is open when clearing > device queues when changing device's power mode as there is no harm in > sending input events through closed input device - the events will simply > be dropped by the input core. > > Note that there are more places in cyapa driver that call > input_device_enabled() without holding input->mutex, those are left > unfixed for now. > > Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> > --- > > Marek, could you please try this one? The warning is still there: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1787 at drivers/input/input.c:2230 input_device_enabled+0x68/0x6c Modules linked in: cmac bnep mwifiex_sdio mwifiex sha256_generic libsha256 sha256_arm btmrvl_sdio btmrvl cfg80211 bluetooth s5p_mfc exynos_gsc v4l2_mem2mem videob CPU: 1 PID: 1787 Comm: rtcwake Not tainted 5.10.0-rc7-next-20201210-00001-g70a81f43fddf #2204 Hardware name: Samsung Exynos (Flattened Device Tree) [<c0111a58>] (unwind_backtrace) from [<c010d390>] (show_stack+0x10/0x14) [<c010d390>] (show_stack) from [<c0b3503c>] (dump_stack+0xb4/0xd4) [<c0b3503c>] (dump_stack) from [<c0127428>] (__warn+0xd8/0x11c) [<c0127428>] (__warn) from [<c012751c>] (warn_slowpath_fmt+0xb0/0xb8) [<c012751c>] (warn_slowpath_fmt) from [<c07fbccc>] (input_device_enabled+0x68/0x6c) [<c07fbccc>] (input_device_enabled) from [<c080a204>] (cyapa_reinitialize+0x4c/0x154) [<c080a204>] (cyapa_reinitialize) from [<c080a354>] (cyapa_resume+0x48/0x98) [<c080a354>] (cyapa_resume) from [<c06b0230>] (dpm_run_callback+0xb0/0x3c8) [<c06b0230>] (dpm_run_callback) from [<c06b0604>] (device_resume+0xbc/0x260) [<c06b0604>] (device_resume) from [<c06b29e4>] (dpm_resume+0x14c/0x51c) [<c06b29e4>] (dpm_resume) from [<c06b35b8>] (dpm_resume_end+0xc/0x18) [<c06b35b8>] (dpm_resume_end) from [<c01a1270>] (suspend_devices_and_enter+0x1b4/0xbd4) [<c01a1270>] (suspend_devices_and_enter) from [<c01a1fa4>] (pm_suspend+0x314/0x42c) [<c01a1fa4>] (pm_suspend) from [<c019fe90>] (state_store+0x6c/0xc8) [<c019fe90>] (state_store) from [<c0388438>] (kernfs_fop_write+0x10c/0x228) [<c0388438>] (kernfs_fop_write) from [<c02dc3e8>] (vfs_write+0xc8/0x530) [<c02dc3e8>] (vfs_write) from [<c02dc98c>] (ksys_write+0x60/0xd8) [<c02dc98c>] (ksys_write) from [<c0100060>] (ret_fast_syscall+0x0/0x2c) Exception stack(0xc3923fa8 to 0xc3923ff0) irq event stamp: 54139 hardirqs last enabled at (54147): [<c01a5f20>] vprintk_emit+0x2b8/0x308 hardirqs last disabled at (54154): [<c01a5ee4>] vprintk_emit+0x27c/0x308 softirqs last enabled at (50722): [<c01017a8>] __do_softirq+0x528/0x684 softirqs last disabled at (50671): [<c0130ac8>] irq_exit+0x1ec/0x1f8 ---[ end trace 1fbefe3f239ae597 ]--- > drivers/input/mouse/cyapa_gen3.c | 5 +---- > drivers/input/mouse/cyapa_gen5.c | 3 +-- > 2 files changed, 2 insertions(+), 6 deletions(-) > > diff --git a/drivers/input/mouse/cyapa_gen3.c b/drivers/input/mouse/cyapa_gen3.c > index a97f4acb6452..4a9022faf945 100644 > --- a/drivers/input/mouse/cyapa_gen3.c > +++ b/drivers/input/mouse/cyapa_gen3.c > @@ -907,7 +907,6 @@ static u16 cyapa_get_wait_time_for_pwr_cmd(u8 pwr_mode) > static int cyapa_gen3_set_power_mode(struct cyapa *cyapa, u8 power_mode, > u16 always_unused, enum cyapa_pm_stage pm_stage) > { > - struct input_dev *input = cyapa->input; > u8 power; > int tries; > int sleep_time; > @@ -953,7 +952,6 @@ static int cyapa_gen3_set_power_mode(struct cyapa *cyapa, u8 power_mode, > * depending on the command's content. > */ > if (cyapa->operational && > - input && input_device_enabled(input) && > (pm_stage == CYAPA_PM_RUNTIME_SUSPEND || > pm_stage == CYAPA_PM_RUNTIME_RESUME)) { > /* Try to polling in 120Hz, read may fail, just ignore it. */ > @@ -1223,8 +1221,7 @@ static int cyapa_gen3_try_poll_handler(struct cyapa *cyapa) > (data.finger_btn & OP_DATA_VALID) != OP_DATA_VALID) > return -EINVAL; > > - return cyapa_gen3_event_process(cyapa, &data); > - > + return cyapa->input ? cyapa_gen3_event_process(cyapa, &data) : 0; > } > > static int cyapa_gen3_initialize(struct cyapa *cyapa) { return 0; } > diff --git a/drivers/input/mouse/cyapa_gen5.c b/drivers/input/mouse/cyapa_gen5.c > index abf42f77b4c5..afc5aa4dcf47 100644 > --- a/drivers/input/mouse/cyapa_gen5.c > +++ b/drivers/input/mouse/cyapa_gen5.c > @@ -518,8 +518,7 @@ int cyapa_empty_pip_output_data(struct cyapa *cyapa, > *len = length; > /* Response found, success. */ > return 0; > - } else if (cyapa->operational && > - input && input_device_enabled(input) && > + } else if (cyapa->operational && input && > (pm_stage == CYAPA_PM_RUNTIME_RESUME || > pm_stage == CYAPA_PM_RUNTIME_SUSPEND)) { > /* Parse the data and report it if it's valid. */ > Best regards
On Fri, Dec 11, 2020 at 09:22:44AM +0100, Marek Szyprowski wrote: > > On 11.12.2020 08:09, Dmitry Torokhov wrote: > > Input device's user counter is supposed to be accessed only while holding > > input->mutex. Commit d69f0a43c677 ("Input: use input_device_enabled()") > > recently switched cyapa to using the dedicated API and it uncovered the > > fact that cyapa driver violated this constraint. > > > > This patch removes checks whether the input device is open when clearing > > device queues when changing device's power mode as there is no harm in > > sending input events through closed input device - the events will simply > > be dropped by the input core. > > > > Note that there are more places in cyapa driver that call > > input_device_enabled() without holding input->mutex, those are left > > unfixed for now. > > > > Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> > > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> > > --- > > > > Marek, could you please try this one? > > The warning is still there: Ah, yes, we are hitting another instance right after setting power mode. I need to think more how to handle that one. Thanks.
diff --git a/drivers/input/mouse/cyapa_gen3.c b/drivers/input/mouse/cyapa_gen3.c index a97f4acb6452..4a9022faf945 100644 --- a/drivers/input/mouse/cyapa_gen3.c +++ b/drivers/input/mouse/cyapa_gen3.c @@ -907,7 +907,6 @@ static u16 cyapa_get_wait_time_for_pwr_cmd(u8 pwr_mode) static int cyapa_gen3_set_power_mode(struct cyapa *cyapa, u8 power_mode, u16 always_unused, enum cyapa_pm_stage pm_stage) { - struct input_dev *input = cyapa->input; u8 power; int tries; int sleep_time; @@ -953,7 +952,6 @@ static int cyapa_gen3_set_power_mode(struct cyapa *cyapa, u8 power_mode, * depending on the command's content. */ if (cyapa->operational && - input && input_device_enabled(input) && (pm_stage == CYAPA_PM_RUNTIME_SUSPEND || pm_stage == CYAPA_PM_RUNTIME_RESUME)) { /* Try to polling in 120Hz, read may fail, just ignore it. */ @@ -1223,8 +1221,7 @@ static int cyapa_gen3_try_poll_handler(struct cyapa *cyapa) (data.finger_btn & OP_DATA_VALID) != OP_DATA_VALID) return -EINVAL; - return cyapa_gen3_event_process(cyapa, &data); - + return cyapa->input ? cyapa_gen3_event_process(cyapa, &data) : 0; } static int cyapa_gen3_initialize(struct cyapa *cyapa) { return 0; } diff --git a/drivers/input/mouse/cyapa_gen5.c b/drivers/input/mouse/cyapa_gen5.c index abf42f77b4c5..afc5aa4dcf47 100644 --- a/drivers/input/mouse/cyapa_gen5.c +++ b/drivers/input/mouse/cyapa_gen5.c @@ -518,8 +518,7 @@ int cyapa_empty_pip_output_data(struct cyapa *cyapa, *len = length; /* Response found, success. */ return 0; - } else if (cyapa->operational && - input && input_device_enabled(input) && + } else if (cyapa->operational && input && (pm_stage == CYAPA_PM_RUNTIME_RESUME || pm_stage == CYAPA_PM_RUNTIME_SUSPEND)) { /* Parse the data and report it if it's valid. */
Input device's user counter is supposed to be accessed only while holding input->mutex. Commit d69f0a43c677 ("Input: use input_device_enabled()") recently switched cyapa to using the dedicated API and it uncovered the fact that cyapa driver violated this constraint. This patch removes checks whether the input device is open when clearing device queues when changing device's power mode as there is no harm in sending input events through closed input device - the events will simply be dropped by the input core. Note that there are more places in cyapa driver that call input_device_enabled() without holding input->mutex, those are left unfixed for now. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- Marek, could you please try this one? drivers/input/mouse/cyapa_gen3.c | 5 +---- drivers/input/mouse/cyapa_gen5.c | 3 +-- 2 files changed, 2 insertions(+), 6 deletions(-)