| Message ID | 20201217173708.6940-3-nramas@linux.microsoft.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Carry forward IMA measurement log on kexec on ARM64 | expand |
On 12/17/20 9:37 AM, Lakshmi Ramasubramanian wrote: > The functions defined in "arch/powerpc/kexec/ima.c" handle setting up > and freeing the resources required to carry over the IMA measurement > list from the current kernel to the next kernel across kexec system call. > These functions do not have architecture specific code, but are > currently limited to powerpc. Typo in the email address of James Morse (ARM.com). Sorry about that. Adding the correct email address. -lakshmi > > Move setup_ima_buffer() call into of_kexec_setup_new_fdt(). > > Move architecture independent functions from "arch/powerpc/kexec/ima.c" > to "drivers/of/kexec.c". Delete "arch/powerpc/kexec/ima.c" and > "arch/powerpc/include/asm/ima.h". Remove references to the deleted files > in powerpc and in ima. > > delete_fdt_mem_rsv() defined in "arch/powerpc/kexec/file_load.c" > is not used anymore. Remove this function. > > Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> > --- > arch/powerpc/include/asm/ima.h | 30 ----- > arch/powerpc/include/asm/kexec.h | 1 - > arch/powerpc/kexec/Makefile | 7 - > arch/powerpc/kexec/file_load.c | 39 ------ > arch/powerpc/kexec/ima.c | 182 -------------------------- > drivers/of/kexec.c | 198 +++++++++++++++++++++++++++++ > include/linux/of.h | 17 +++ > security/integrity/ima/ima.h | 4 - > security/integrity/ima/ima_kexec.c | 2 + > 9 files changed, 217 insertions(+), 263 deletions(-) > delete mode 100644 arch/powerpc/include/asm/ima.h > delete mode 100644 arch/powerpc/kexec/ima.c > > diff --git a/arch/powerpc/include/asm/ima.h b/arch/powerpc/include/asm/ima.h > deleted file mode 100644 > index ead488cf3981..000000000000 > --- a/arch/powerpc/include/asm/ima.h > +++ /dev/null > @@ -1,30 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0 */ > -#ifndef _ASM_POWERPC_IMA_H > -#define _ASM_POWERPC_IMA_H > - > -struct kimage; > - > -int ima_get_kexec_buffer(void **addr, size_t *size); > -int ima_free_kexec_buffer(void); > - > -#ifdef CONFIG_IMA > -void remove_ima_buffer(void *fdt, int chosen_node); > -#else > -static inline void remove_ima_buffer(void *fdt, int chosen_node) {} > -#endif > - > -#ifdef CONFIG_IMA_KEXEC > -int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr, > - size_t size); > - > -int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node); > -#else > -static inline int setup_ima_buffer(const struct kimage *image, void *fdt, > - int chosen_node) > -{ > - remove_ima_buffer(fdt, chosen_node); > - return 0; > -} > -#endif /* CONFIG_IMA_KEXEC */ > - > -#endif /* _ASM_POWERPC_IMA_H */ > diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h > index dbf09d2f36d0..d4b7d2d6191d 100644 > --- a/arch/powerpc/include/asm/kexec.h > +++ b/arch/powerpc/include/asm/kexec.h > @@ -126,7 +126,6 @@ int setup_purgatory(struct kimage *image, const void *slave_code, > int setup_new_fdt(const struct kimage *image, void *fdt, > unsigned long initrd_load_addr, unsigned long initrd_len, > const char *cmdline); > -int delete_fdt_mem_rsv(void *fdt, unsigned long start, unsigned long size); > > #ifdef CONFIG_PPC64 > struct kexec_buf; > diff --git a/arch/powerpc/kexec/Makefile b/arch/powerpc/kexec/Makefile > index 4aff6846c772..b6c52608cb49 100644 > --- a/arch/powerpc/kexec/Makefile > +++ b/arch/powerpc/kexec/Makefile > @@ -9,13 +9,6 @@ obj-$(CONFIG_PPC32) += relocate_32.o > > obj-$(CONFIG_KEXEC_FILE) += file_load.o ranges.o file_load_$(BITS).o elf_$(BITS).o > > -ifdef CONFIG_HAVE_IMA_KEXEC > -ifdef CONFIG_IMA > -obj-y += ima.o > -endif > -endif > - > - > # Disable GCOV, KCOV & sanitizers in odd or sensitive code > GCOV_PROFILE_core_$(BITS).o := n > KCOV_INSTRUMENT_core_$(BITS).o := n > diff --git a/arch/powerpc/kexec/file_load.c b/arch/powerpc/kexec/file_load.c > index 956bcb2d1ec2..f37652ccb8a1 100644 > --- a/arch/powerpc/kexec/file_load.c > +++ b/arch/powerpc/kexec/file_load.c > @@ -20,7 +20,6 @@ > #include <linux/of_fdt.h> > #include <linux/libfdt.h> > #include <asm/setup.h> > -#include <asm/ima.h> > > #define SLAVE_CODE_SIZE 256 /* First 0x100 bytes */ > > @@ -110,38 +109,6 @@ int setup_purgatory(struct kimage *image, const void *slave_code, > return 0; > } > > -/** > - * delete_fdt_mem_rsv - delete memory reservation with given address and size > - * > - * Return: 0 on success, or negative errno on error. > - */ > -int delete_fdt_mem_rsv(void *fdt, unsigned long start, unsigned long size) > -{ > - int i, ret, num_rsvs = fdt_num_mem_rsv(fdt); > - > - for (i = 0; i < num_rsvs; i++) { > - uint64_t rsv_start, rsv_size; > - > - ret = fdt_get_mem_rsv(fdt, i, &rsv_start, &rsv_size); > - if (ret) { > - pr_err("Malformed device tree.\n"); > - return -EINVAL; > - } > - > - if (rsv_start == start && rsv_size == size) { > - ret = fdt_del_mem_rsv(fdt, i); > - if (ret) { > - pr_err("Error deleting device tree reservation.\n"); > - return -EINVAL; > - } > - > - return 0; > - } > - } > - > - return -ENOENT; > -} > - > /* > * setup_new_fdt - modify /chosen and memory reservation for the next kernel > * @image: kexec image being loaded. > @@ -163,12 +130,6 @@ int setup_new_fdt(const struct kimage *image, void *fdt, > if (ret) > goto err; > > - ret = setup_ima_buffer(image, fdt, fdt_path_offset(fdt, "/chosen")); > - if (ret) { > - pr_err("Error setting up the new device tree.\n"); > - return ret; > - } > - > return 0; > > err: > diff --git a/arch/powerpc/kexec/ima.c b/arch/powerpc/kexec/ima.c > deleted file mode 100644 > index d579d3da4715..000000000000 > --- a/arch/powerpc/kexec/ima.c > +++ /dev/null > @@ -1,182 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-or-later > -/* > - * Copyright (C) 2016 IBM Corporation > - * > - * Authors: > - * Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> > - */ > - > -#include <linux/slab.h> > -#include <linux/kexec.h> > -#include <linux/of.h> > -#include <linux/memblock.h> > -#include <linux/libfdt.h> > -#include <asm/ima.h> > - > -static int get_addr_size_cells(int *addr_cells, int *size_cells) > -{ > - struct device_node *root; > - > - root = of_find_node_by_path("/"); > - if (!root) > - return -EINVAL; > - > - *addr_cells = of_n_addr_cells(root); > - *size_cells = of_n_size_cells(root); > - > - of_node_put(root); > - > - return 0; > -} > - > -static int do_get_kexec_buffer(const void *prop, int len, unsigned long *addr, > - size_t *size) > -{ > - int ret, addr_cells, size_cells; > - > - ret = get_addr_size_cells(&addr_cells, &size_cells); > - if (ret) > - return ret; > - > - if (len < 4 * (addr_cells + size_cells)) > - return -ENOENT; > - > - *addr = of_read_number(prop, addr_cells); > - *size = of_read_number(prop + 4 * addr_cells, size_cells); > - > - return 0; > -} > - > -/** > - * ima_get_kexec_buffer - get IMA buffer from the previous kernel > - * @addr: On successful return, set to point to the buffer contents. > - * @size: On successful return, set to the buffer size. > - * > - * Return: 0 on success, negative errno on error. > - */ > -int ima_get_kexec_buffer(void **addr, size_t *size) > -{ > - int ret, len; > - unsigned long tmp_addr; > - size_t tmp_size; > - const void *prop; > - > - prop = of_get_property(of_chosen, "linux,ima-kexec-buffer", &len); > - if (!prop) > - return -ENOENT; > - > - ret = do_get_kexec_buffer(prop, len, &tmp_addr, &tmp_size); > - if (ret) > - return ret; > - > - *addr = __va(tmp_addr); > - *size = tmp_size; > - > - return 0; > -} > - > -/** > - * ima_free_kexec_buffer - free memory used by the IMA buffer > - */ > -int ima_free_kexec_buffer(void) > -{ > - int ret; > - unsigned long addr; > - size_t size; > - struct property *prop; > - > - prop = of_find_property(of_chosen, "linux,ima-kexec-buffer", NULL); > - if (!prop) > - return -ENOENT; > - > - ret = do_get_kexec_buffer(prop->value, prop->length, &addr, &size); > - if (ret) > - return ret; > - > - ret = of_remove_property(of_chosen, prop); > - if (ret) > - return ret; > - > - return memblock_free(addr, size); > - > -} > - > -/** > - * remove_ima_buffer - remove the IMA buffer property and reservation from @fdt > - * > - * The IMA measurement buffer is of no use to a subsequent kernel, so we always > - * remove it from the device tree. > - */ > -void remove_ima_buffer(void *fdt, int chosen_node) > -{ > - int ret, len; > - unsigned long addr; > - size_t size; > - const void *prop; > - > - prop = fdt_getprop(fdt, chosen_node, "linux,ima-kexec-buffer", &len); > - if (!prop) > - return; > - > - ret = do_get_kexec_buffer(prop, len, &addr, &size); > - fdt_delprop(fdt, chosen_node, "linux,ima-kexec-buffer"); > - if (ret) > - return; > - > - ret = delete_fdt_mem_rsv(fdt, addr, size); > - if (!ret) > - pr_debug("Removed old IMA buffer reservation.\n"); > -} > - > -#ifdef CONFIG_IMA_KEXEC > -/** > - * arch_ima_add_kexec_buffer - do arch-specific steps to add the IMA buffer > - * > - * Architectures should use this function to pass on the IMA buffer > - * information to the next kernel. > - * > - * Return: 0 on success, negative errno on error. > - */ > -int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr, > - size_t size) > -{ > - image->arch.ima_buffer_addr = load_addr; > - image->arch.ima_buffer_size = size; > - > - return 0; > -} > - > -/** > - * setup_ima_buffer - add IMA buffer information to the fdt > - * @image: kexec image being loaded. > - * @fdt: Flattened device tree for the next kernel. > - * @chosen_node: Offset to the chosen node. > - * > - * Return: 0 on success, or negative errno on error. > - */ > -int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node) > -{ > - int ret; > - > - remove_ima_buffer(fdt, chosen_node); > - if (!image->arch.ima_buffer_size) > - return 0; > - > - ret = fdt_appendprop_addrrange(fdt, 0, chosen_node, > - "linux,ima-kexec-buffer", > - image->arch.ima_buffer_addr, > - image->arch.ima_buffer_size); > - if (ret) > - return (ret == -FDT_ERR_NOSPACE ? -ENOMEM : -EINVAL); > - > - ret = fdt_add_mem_rsv(fdt, image->arch.ima_buffer_addr, > - image->arch.ima_buffer_size); > - if (ret) > - return -EINVAL; > - > - pr_debug("IMA buffer at 0x%llx, size = 0x%zx\n", > - image->arch.ima_buffer_addr, image->arch.ima_buffer_size); > - > - return 0; > -} > -#endif /* CONFIG_IMA_KEXEC */ > diff --git a/drivers/of/kexec.c b/drivers/of/kexec.c > index 66787be081fe..a6ab35f16dd2 100644 > --- a/drivers/of/kexec.c > +++ b/drivers/of/kexec.c > @@ -10,10 +10,12 @@ > */ > > #include <linux/kernel.h> > +#include <linux/slab.h> > #include <linux/kexec.h> > #include <linux/libfdt.h> > #include <linux/of.h> > #include <linux/of_fdt.h> > +#include <linux/memblock.h> > #include <linux/random.h> > #include <linux/types.h> > > @@ -59,6 +61,141 @@ static int fdt_find_and_del_mem_rsv(void *fdt, unsigned long start, unsigned lon > return -ENOENT; > } > > +/** > + * get_addr_size_cells - Get address and size of root node > + * > + * @addr_cells: Return address of the root node > + * @size_cells: Return size of the root node > + * > + * Return: 0 on success, or negative errno on error. > + */ > +static int get_addr_size_cells(int *addr_cells, int *size_cells) > +{ > + struct device_node *root; > + > + root = of_find_node_by_path("/"); > + if (!root) > + return -EINVAL; > + > + *addr_cells = of_n_addr_cells(root); > + *size_cells = of_n_size_cells(root); > + > + of_node_put(root); > + > + return 0; > +} > + > +/** > + * do_get_kexec_buffer - Get address and size of device tree property > + * > + * @prop: Device tree property > + * @len: Size of @prop > + * @addr: Return address of the node > + * @size: Return size of the node > + * > + * Return: 0 on success, or negative errno on error. > + */ > +static int do_get_kexec_buffer(const void *prop, int len, unsigned long *addr, > + size_t *size) > +{ > + int ret, addr_cells, size_cells; > + > + ret = get_addr_size_cells(&addr_cells, &size_cells); > + if (ret) > + return ret; > + > + if (len < 4 * (addr_cells + size_cells)) > + return -ENOENT; > + > + *addr = of_read_number(prop, addr_cells); > + *size = of_read_number(prop + 4 * addr_cells, size_cells); > + > + return 0; > +} > + > +/** > + * ima_get_kexec_buffer - get IMA buffer from the previous kernel > + * @addr: On successful return, set to point to the buffer contents. > + * @size: On successful return, set to the buffer size. > + * > + * Return: 0 on success, negative errno on error. > + */ > +int ima_get_kexec_buffer(void **addr, size_t *size) > +{ > + int ret, len; > + unsigned long tmp_addr; > + size_t tmp_size; > + const void *prop; > + > + prop = of_get_property(of_chosen, "linux,ima-kexec-buffer", &len); > + if (!prop) > + return -ENOENT; > + > + ret = do_get_kexec_buffer(prop, len, &tmp_addr, &tmp_size); > + if (ret) > + return ret; > + > + *addr = __va(tmp_addr); > + *size = tmp_size; > + > + return 0; > +} > + > +/** > + * ima_free_kexec_buffer - free memory used by the IMA buffer > + */ > +int ima_free_kexec_buffer(void) > +{ > + int ret; > + unsigned long addr; > + size_t size; > + struct property *prop; > + > + prop = of_find_property(of_chosen, "linux,ima-kexec-buffer", NULL); > + if (!prop) > + return -ENOENT; > + > + ret = do_get_kexec_buffer(prop->value, prop->length, &addr, &size); > + if (ret) > + return ret; > + > + ret = of_remove_property(of_chosen, prop); > + if (ret) > + return ret; > + > + return memblock_free(addr, size); > +} > + > +/** > + * remove_ima_buffer - remove the IMA buffer property and reservation from @fdt > + * > + * @fdt: Flattened Device Tree to update > + * @chosen_node: Offset to the chosen node in the device tree > + * > + * The IMA measurement buffer is of no use to a subsequent kernel, so we always > + * remove it from the device tree. > + */ > +void remove_ima_buffer(void *fdt, int chosen_node) > +{ > + int ret, len; > + unsigned long addr; > + size_t size; > + const void *prop; > + > + prop = fdt_getprop(fdt, chosen_node, "linux,ima-kexec-buffer", &len); > + if (!prop) > + return; > + > + ret = do_get_kexec_buffer(prop, len, &addr, &size); > + fdt_delprop(fdt, chosen_node, "linux,ima-kexec-buffer"); > + if (ret) > + return; > + > + ret = fdt_find_and_del_mem_rsv(fdt, addr, size); > + if (!ret) > + pr_debug("Removed old IMA buffer reservation.\n"); > +} > + > /* > * of_kexec_setup_new_fdt - modify /chosen and memory reservation for the next kernel > * > @@ -219,6 +356,10 @@ int of_kexec_setup_new_fdt(const struct kimage *image, void *fdt, > } > > ret = fdt_setprop(fdt, chosen_node, "linux,booted-from-kexec", NULL, 0); > + if (ret) > + goto out; > + > + ret = setup_ima_buffer(image, fdt, fdt_path_offset(fdt, "/chosen")); > > out: > if (ret) > @@ -226,3 +367,60 @@ int of_kexec_setup_new_fdt(const struct kimage *image, void *fdt, > > return 0; > } > + > +#ifdef CONFIG_IMA_KEXEC > +/** > + * arch_ima_add_kexec_buffer - do arch-specific steps to add the IMA buffer > + * > + * @image: kimage struct to set IMA buffer data > + * @load_addr: Starting address where IMA buffer is loaded at > + * @size: Number of bytes in the IMA buffer > + * > + * Architectures should use this function to pass on the IMA buffer > + * information to the next kernel. > + * > + * Return: 0 on success, negative errno on error. > + */ > +int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr, > + size_t size) > +{ > + image->arch.ima_buffer_addr = load_addr; > + image->arch.ima_buffer_size = size; > + > + return 0; > +} > + > +/** > + * setup_ima_buffer - add IMA buffer information to the fdt > + * @image: kexec image being loaded. > + * @fdt: Flattened device tree for the next kernel. > + * @chosen_node: Offset to the chosen node. > + * > + * Return: 0 on success, or negative errno on error. > + */ > +int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node) > +{ > + int ret; > + > + remove_ima_buffer(fdt, chosen_node); > + if (!image->arch.ima_buffer_size) > + return 0; > + > + ret = fdt_appendprop_addrrange(fdt, 0, chosen_node, > + "linux,ima-kexec-buffer", > + image->arch.ima_buffer_addr, > + image->arch.ima_buffer_size); > + if (ret) > + return (ret == -FDT_ERR_NOSPACE ? -ENOMEM : -EINVAL); > + > + ret = fdt_add_mem_rsv(fdt, image->arch.ima_buffer_addr, > + image->arch.ima_buffer_size); > + if (ret) > + return -EINVAL; > + > + pr_debug("IMA buffer at 0x%llx, size = 0x%zx\n", > + image->arch.ima_buffer_addr, image->arch.ima_buffer_size); > + > + return 0; > +} > +#endif /* CONFIG_IMA_KEXEC */ > diff --git a/include/linux/of.h b/include/linux/of.h > index 3375f5295875..7477f2266d8f 100644 > --- a/include/linux/of.h > +++ b/include/linux/of.h > @@ -562,6 +562,23 @@ struct kimage; > int of_kexec_setup_new_fdt(const struct kimage *image, void *fdt, > unsigned long initrd_load_addr, unsigned long initrd_len, > const char *cmdline); > +int ima_get_kexec_buffer(void **addr, size_t *size); > +int ima_free_kexec_buffer(void); > +void remove_ima_buffer(void *fdt, int chosen_node); > + > +#ifdef CONFIG_IMA_KEXEC > +int arch_ima_add_kexec_buffer(struct kimage *image, > + unsigned long load_addr, > + size_t size); > +int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node); > +#else > +static inline int setup_ima_buffer(const struct kimage *image, void *fdt, > + int chosen_node) > +{ > + remove_ima_buffer(fdt, chosen_node); > + return 0; > +} > +#endif /* CONFIG_IMA_KEXEC */ > > #else /* CONFIG_OF */ > > diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h > index 6ebefec616e4..7c3947ad3773 100644 > --- a/security/integrity/ima/ima.h > +++ b/security/integrity/ima/ima.h > @@ -24,10 +24,6 @@ > > #include "../integrity.h" > > -#ifdef CONFIG_HAVE_IMA_KEXEC > -#include <asm/ima.h> > -#endif > - > enum ima_show_type { IMA_SHOW_BINARY, IMA_SHOW_BINARY_NO_FIELD_LEN, > IMA_SHOW_BINARY_OLD_STRING_FMT, IMA_SHOW_ASCII }; > enum tpm_pcrs { TPM_PCR0 = 0, TPM_PCR8 = 8, TPM_PCR10 = 10 }; > diff --git a/security/integrity/ima/ima_kexec.c b/security/integrity/ima/ima_kexec.c > index 121de3e04af2..3d6a8820e2a5 100644 > --- a/security/integrity/ima/ima_kexec.c > +++ b/security/integrity/ima/ima_kexec.c > @@ -9,7 +9,9 @@ > > #include <linux/seq_file.h> > #include <linux/vmalloc.h> > +#include <linux/of.h> > #include <linux/kexec.h> > +#include <linux/ima.h> > #include "ima.h" > > #ifdef CONFIG_IMA_KEXEC >
On Thu, Dec 17, 2020 at 09:37:06AM -0800, Lakshmi Ramasubramanian wrote: > The functions defined in "arch/powerpc/kexec/ima.c" handle setting up > and freeing the resources required to carry over the IMA measurement > list from the current kernel to the next kernel across kexec system call. > These functions do not have architecture specific code, but are > currently limited to powerpc. > > Move setup_ima_buffer() call into of_kexec_setup_new_fdt(). > > Move architecture independent functions from "arch/powerpc/kexec/ima.c" > to "drivers/of/kexec.c". Delete "arch/powerpc/kexec/ima.c" and > "arch/powerpc/include/asm/ima.h". Remove references to the deleted files > in powerpc and in ima. > > delete_fdt_mem_rsv() defined in "arch/powerpc/kexec/file_load.c" > is not used anymore. Remove this function. I think this patch should come first and then patch 1. Move then rework the code. > > Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> > --- > arch/powerpc/include/asm/ima.h | 30 ----- > arch/powerpc/include/asm/kexec.h | 1 - > arch/powerpc/kexec/Makefile | 7 - > arch/powerpc/kexec/file_load.c | 39 ------ > arch/powerpc/kexec/ima.c | 182 -------------------------- > drivers/of/kexec.c | 198 +++++++++++++++++++++++++++++ > include/linux/of.h | 17 +++ > security/integrity/ima/ima.h | 4 - > security/integrity/ima/ima_kexec.c | 2 + > 9 files changed, 217 insertions(+), 263 deletions(-) > delete mode 100644 arch/powerpc/include/asm/ima.h > delete mode 100644 arch/powerpc/kexec/ima.c > > diff --git a/arch/powerpc/include/asm/ima.h b/arch/powerpc/include/asm/ima.h > deleted file mode 100644 > index ead488cf3981..000000000000 > --- a/arch/powerpc/include/asm/ima.h > +++ /dev/null > @@ -1,30 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0 */ > -#ifndef _ASM_POWERPC_IMA_H > -#define _ASM_POWERPC_IMA_H > - > -struct kimage; > - > -int ima_get_kexec_buffer(void **addr, size_t *size); > -int ima_free_kexec_buffer(void); > - > -#ifdef CONFIG_IMA > -void remove_ima_buffer(void *fdt, int chosen_node); > -#else > -static inline void remove_ima_buffer(void *fdt, int chosen_node) {} > -#endif > - > -#ifdef CONFIG_IMA_KEXEC > -int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr, > - size_t size); > - > -int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node); > -#else > -static inline int setup_ima_buffer(const struct kimage *image, void *fdt, > - int chosen_node) > -{ > - remove_ima_buffer(fdt, chosen_node); > - return 0; > -} > -#endif /* CONFIG_IMA_KEXEC */ > - > -#endif /* _ASM_POWERPC_IMA_H */ > diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h > index dbf09d2f36d0..d4b7d2d6191d 100644 > --- a/arch/powerpc/include/asm/kexec.h > +++ b/arch/powerpc/include/asm/kexec.h > @@ -126,7 +126,6 @@ int setup_purgatory(struct kimage *image, const void *slave_code, > int setup_new_fdt(const struct kimage *image, void *fdt, > unsigned long initrd_load_addr, unsigned long initrd_len, > const char *cmdline); > -int delete_fdt_mem_rsv(void *fdt, unsigned long start, unsigned long size); > > #ifdef CONFIG_PPC64 > struct kexec_buf; > diff --git a/arch/powerpc/kexec/Makefile b/arch/powerpc/kexec/Makefile > index 4aff6846c772..b6c52608cb49 100644 > --- a/arch/powerpc/kexec/Makefile > +++ b/arch/powerpc/kexec/Makefile > @@ -9,13 +9,6 @@ obj-$(CONFIG_PPC32) += relocate_32.o > > obj-$(CONFIG_KEXEC_FILE) += file_load.o ranges.o file_load_$(BITS).o elf_$(BITS).o > > -ifdef CONFIG_HAVE_IMA_KEXEC > -ifdef CONFIG_IMA > -obj-y += ima.o > -endif > -endif > - > - > # Disable GCOV, KCOV & sanitizers in odd or sensitive code > GCOV_PROFILE_core_$(BITS).o := n > KCOV_INSTRUMENT_core_$(BITS).o := n > diff --git a/arch/powerpc/kexec/file_load.c b/arch/powerpc/kexec/file_load.c > index 956bcb2d1ec2..f37652ccb8a1 100644 > --- a/arch/powerpc/kexec/file_load.c > +++ b/arch/powerpc/kexec/file_load.c > @@ -20,7 +20,6 @@ > #include <linux/of_fdt.h> > #include <linux/libfdt.h> > #include <asm/setup.h> > -#include <asm/ima.h> > > #define SLAVE_CODE_SIZE 256 /* First 0x100 bytes */ > > @@ -110,38 +109,6 @@ int setup_purgatory(struct kimage *image, const void *slave_code, > return 0; > } > > -/** > - * delete_fdt_mem_rsv - delete memory reservation with given address and size > - * > - * Return: 0 on success, or negative errno on error. > - */ > -int delete_fdt_mem_rsv(void *fdt, unsigned long start, unsigned long size) > -{ > - int i, ret, num_rsvs = fdt_num_mem_rsv(fdt); > - > - for (i = 0; i < num_rsvs; i++) { > - uint64_t rsv_start, rsv_size; > - > - ret = fdt_get_mem_rsv(fdt, i, &rsv_start, &rsv_size); > - if (ret) { > - pr_err("Malformed device tree.\n"); > - return -EINVAL; > - } > - > - if (rsv_start == start && rsv_size == size) { > - ret = fdt_del_mem_rsv(fdt, i); > - if (ret) { > - pr_err("Error deleting device tree reservation.\n"); > - return -EINVAL; > - } > - > - return 0; > - } > - } > - > - return -ENOENT; > -} > - > /* > * setup_new_fdt - modify /chosen and memory reservation for the next kernel > * @image: kexec image being loaded. > @@ -163,12 +130,6 @@ int setup_new_fdt(const struct kimage *image, void *fdt, > if (ret) > goto err; > > - ret = setup_ima_buffer(image, fdt, fdt_path_offset(fdt, "/chosen")); > - if (ret) { > - pr_err("Error setting up the new device tree.\n"); > - return ret; > - } > - > return 0; > > err: > diff --git a/arch/powerpc/kexec/ima.c b/arch/powerpc/kexec/ima.c > deleted file mode 100644 > index d579d3da4715..000000000000 > --- a/arch/powerpc/kexec/ima.c > +++ /dev/null > @@ -1,182 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-or-later > -/* > - * Copyright (C) 2016 IBM Corporation > - * > - * Authors: > - * Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> > - */ > - > -#include <linux/slab.h> > -#include <linux/kexec.h> > -#include <linux/of.h> > -#include <linux/memblock.h> > -#include <linux/libfdt.h> > -#include <asm/ima.h> > - > -static int get_addr_size_cells(int *addr_cells, int *size_cells) > -{ > - struct device_node *root; > - > - root = of_find_node_by_path("/"); > - if (!root) > - return -EINVAL; > - > - *addr_cells = of_n_addr_cells(root); > - *size_cells = of_n_size_cells(root); > - > - of_node_put(root); > - > - return 0; > -} > - > -static int do_get_kexec_buffer(const void *prop, int len, unsigned long *addr, > - size_t *size) > -{ > - int ret, addr_cells, size_cells; > - > - ret = get_addr_size_cells(&addr_cells, &size_cells); > - if (ret) > - return ret; > - > - if (len < 4 * (addr_cells + size_cells)) > - return -ENOENT; > - > - *addr = of_read_number(prop, addr_cells); > - *size = of_read_number(prop + 4 * addr_cells, size_cells); > - > - return 0; > -} > - > -/** > - * ima_get_kexec_buffer - get IMA buffer from the previous kernel > - * @addr: On successful return, set to point to the buffer contents. > - * @size: On successful return, set to the buffer size. > - * > - * Return: 0 on success, negative errno on error. > - */ > -int ima_get_kexec_buffer(void **addr, size_t *size) > -{ > - int ret, len; > - unsigned long tmp_addr; > - size_t tmp_size; > - const void *prop; > - > - prop = of_get_property(of_chosen, "linux,ima-kexec-buffer", &len); > - if (!prop) > - return -ENOENT; > - > - ret = do_get_kexec_buffer(prop, len, &tmp_addr, &tmp_size); > - if (ret) > - return ret; > - > - *addr = __va(tmp_addr); > - *size = tmp_size; > - > - return 0; > -} > - > -/** > - * ima_free_kexec_buffer - free memory used by the IMA buffer > - */ > -int ima_free_kexec_buffer(void) > -{ > - int ret; > - unsigned long addr; > - size_t size; > - struct property *prop; > - > - prop = of_find_property(of_chosen, "linux,ima-kexec-buffer", NULL); > - if (!prop) > - return -ENOENT; > - > - ret = do_get_kexec_buffer(prop->value, prop->length, &addr, &size); > - if (ret) > - return ret; > - > - ret = of_remove_property(of_chosen, prop); > - if (ret) > - return ret; > - > - return memblock_free(addr, size); > - > -} > - > -/** > - * remove_ima_buffer - remove the IMA buffer property and reservation from @fdt > - * > - * The IMA measurement buffer is of no use to a subsequent kernel, so we always > - * remove it from the device tree. > - */ > -void remove_ima_buffer(void *fdt, int chosen_node) > -{ > - int ret, len; > - unsigned long addr; > - size_t size; > - const void *prop; > - > - prop = fdt_getprop(fdt, chosen_node, "linux,ima-kexec-buffer", &len); > - if (!prop) > - return; > - > - ret = do_get_kexec_buffer(prop, len, &addr, &size); > - fdt_delprop(fdt, chosen_node, "linux,ima-kexec-buffer"); > - if (ret) > - return; > - > - ret = delete_fdt_mem_rsv(fdt, addr, size); > - if (!ret) > - pr_debug("Removed old IMA buffer reservation.\n"); > -} > - > -#ifdef CONFIG_IMA_KEXEC > -/** > - * arch_ima_add_kexec_buffer - do arch-specific steps to add the IMA buffer > - * > - * Architectures should use this function to pass on the IMA buffer > - * information to the next kernel. > - * > - * Return: 0 on success, negative errno on error. > - */ > -int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr, > - size_t size) > -{ > - image->arch.ima_buffer_addr = load_addr; > - image->arch.ima_buffer_size = size; > - > - return 0; > -} > - > -/** > - * setup_ima_buffer - add IMA buffer information to the fdt > - * @image: kexec image being loaded. > - * @fdt: Flattened device tree for the next kernel. > - * @chosen_node: Offset to the chosen node. > - * > - * Return: 0 on success, or negative errno on error. > - */ > -int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node) > -{ > - int ret; > - > - remove_ima_buffer(fdt, chosen_node); > - if (!image->arch.ima_buffer_size) > - return 0; > - > - ret = fdt_appendprop_addrrange(fdt, 0, chosen_node, > - "linux,ima-kexec-buffer", > - image->arch.ima_buffer_addr, > - image->arch.ima_buffer_size); > - if (ret) > - return (ret == -FDT_ERR_NOSPACE ? -ENOMEM : -EINVAL); > - > - ret = fdt_add_mem_rsv(fdt, image->arch.ima_buffer_addr, > - image->arch.ima_buffer_size); > - if (ret) > - return -EINVAL; > - > - pr_debug("IMA buffer at 0x%llx, size = 0x%zx\n", > - image->arch.ima_buffer_addr, image->arch.ima_buffer_size); > - > - return 0; > -} > -#endif /* CONFIG_IMA_KEXEC */ > diff --git a/drivers/of/kexec.c b/drivers/of/kexec.c > index 66787be081fe..a6ab35f16dd2 100644 > --- a/drivers/of/kexec.c > +++ b/drivers/of/kexec.c > @@ -10,10 +10,12 @@ > */ > > #include <linux/kernel.h> > +#include <linux/slab.h> > #include <linux/kexec.h> > #include <linux/libfdt.h> > #include <linux/of.h> > #include <linux/of_fdt.h> > +#include <linux/memblock.h> > #include <linux/random.h> > #include <linux/types.h> > > @@ -59,6 +61,141 @@ static int fdt_find_and_del_mem_rsv(void *fdt, unsigned long start, unsigned lon > return -ENOENT; > } > > +/** > + * get_addr_size_cells - Get address and size of root node > + * > + * @addr_cells: Return address of the root node > + * @size_cells: Return size of the root node > + * > + * Return: 0 on success, or negative errno on error. > + */ > +static int get_addr_size_cells(int *addr_cells, int *size_cells) > +{ > + struct device_node *root; > + > + root = of_find_node_by_path("/"); > + if (!root) > + return -EINVAL; > + > + *addr_cells = of_n_addr_cells(root); > + *size_cells = of_n_size_cells(root); > + > + of_node_put(root); > + > + return 0; > +} > + > +/** > + * do_get_kexec_buffer - Get address and size of device tree property > + * > + * @prop: Device tree property > + * @len: Size of @prop > + * @addr: Return address of the node > + * @size: Return size of the node > + * > + * Return: 0 on success, or negative errno on error. > + */ > +static int do_get_kexec_buffer(const void *prop, int len, unsigned long *addr, > + size_t *size) > +{ > + int ret, addr_cells, size_cells; > + > + ret = get_addr_size_cells(&addr_cells, &size_cells); > + if (ret) > + return ret; > + > + if (len < 4 * (addr_cells + size_cells)) > + return -ENOENT; > + > + *addr = of_read_number(prop, addr_cells); > + *size = of_read_number(prop + 4 * addr_cells, size_cells); > + > + return 0; > +} > + > +/** > + * ima_get_kexec_buffer - get IMA buffer from the previous kernel > + * @addr: On successful return, set to point to the buffer contents. > + * @size: On successful return, set to the buffer size. > + * > + * Return: 0 on success, negative errno on error. > + */ > +int ima_get_kexec_buffer(void **addr, size_t *size) > +{ > + int ret, len; > + unsigned long tmp_addr; > + size_t tmp_size; > + const void *prop; > + > + prop = of_get_property(of_chosen, "linux,ima-kexec-buffer", &len); > + if (!prop) > + return -ENOENT; > + > + ret = do_get_kexec_buffer(prop, len, &tmp_addr, &tmp_size); > + if (ret) > + return ret; > + > + *addr = __va(tmp_addr); > + *size = tmp_size; > + > + return 0; > +} > + > +/** > + * ima_free_kexec_buffer - free memory used by the IMA buffer > + */ > +int ima_free_kexec_buffer(void) > +{ > + int ret; > + unsigned long addr; > + size_t size; > + struct property *prop; > + > + prop = of_find_property(of_chosen, "linux,ima-kexec-buffer", NULL); > + if (!prop) > + return -ENOENT; > + > + ret = do_get_kexec_buffer(prop->value, prop->length, &addr, &size); > + if (ret) > + return ret; > + > + ret = of_remove_property(of_chosen, prop); > + if (ret) > + return ret; > + > + return memblock_free(addr, size); > +} > + > +/** > + * remove_ima_buffer - remove the IMA buffer property and reservation from @fdt > + * > + * @fdt: Flattened Device Tree to update > + * @chosen_node: Offset to the chosen node in the device tree > + * > + * The IMA measurement buffer is of no use to a subsequent kernel, so we always > + * remove it from the device tree. > + */ > +void remove_ima_buffer(void *fdt, int chosen_node) static > +{ > + int ret, len; > + unsigned long addr; > + size_t size; > + const void *prop; > + > + prop = fdt_getprop(fdt, chosen_node, "linux,ima-kexec-buffer", &len); > + if (!prop) > + return; > + > + ret = do_get_kexec_buffer(prop, len, &addr, &size); > + fdt_delprop(fdt, chosen_node, "linux,ima-kexec-buffer"); > + if (ret) > + return; > + > + ret = fdt_find_and_del_mem_rsv(fdt, addr, size); > + if (!ret) > + pr_debug("Removed old IMA buffer reservation.\n"); > +} All the above needs to be in an '#ifdef CONFIG_IMA_KEXEC'. > + > /* > * of_kexec_setup_new_fdt - modify /chosen and memory reservation for the next kernel > * > @@ -219,6 +356,10 @@ int of_kexec_setup_new_fdt(const struct kimage *image, void *fdt, > } > > ret = fdt_setprop(fdt, chosen_node, "linux,booted-from-kexec", NULL, 0); > + if (ret) > + goto out; > + > + ret = setup_ima_buffer(image, fdt, fdt_path_offset(fdt, "/chosen")); > > out: > if (ret) > @@ -226,3 +367,60 @@ int of_kexec_setup_new_fdt(const struct kimage *image, void *fdt, > > return 0; > } > + > +#ifdef CONFIG_IMA_KEXEC > +/** > + * arch_ima_add_kexec_buffer - do arch-specific steps to add the IMA buffer > + * > + * @image: kimage struct to set IMA buffer data > + * @load_addr: Starting address where IMA buffer is loaded at > + * @size: Number of bytes in the IMA buffer > + * > + * Architectures should use this function to pass on the IMA buffer > + * information to the next kernel. > + * > + * Return: 0 on success, negative errno on error. > + */ > +int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr, > + size_t size) This should be a static inline in asm/kexec.h. > +{ > + image->arch.ima_buffer_addr = load_addr; > + image->arch.ima_buffer_size = size; > + > + return 0; > +} > + > +/** > + * setup_ima_buffer - add IMA buffer information to the fdt > + * @image: kexec image being loaded. > + * @fdt: Flattened device tree for the next kernel. > + * @chosen_node: Offset to the chosen node. > + * > + * Return: 0 on success, or negative errno on error. > + */ > +int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node) static > +{ > + int ret; > + > + remove_ima_buffer(fdt, chosen_node); > + if (!image->arch.ima_buffer_size) > + return 0; > + > + ret = fdt_appendprop_addrrange(fdt, 0, chosen_node, > + "linux,ima-kexec-buffer", > + image->arch.ima_buffer_addr, > + image->arch.ima_buffer_size); > + if (ret) > + return (ret == -FDT_ERR_NOSPACE ? -ENOMEM : -EINVAL); > + > + ret = fdt_add_mem_rsv(fdt, image->arch.ima_buffer_addr, > + image->arch.ima_buffer_size); > + if (ret) > + return -EINVAL; > + > + pr_debug("IMA buffer at 0x%llx, size = 0x%zx\n", > + image->arch.ima_buffer_addr, image->arch.ima_buffer_size); > + > + return 0; > +} > +#endif /* CONFIG_IMA_KEXEC */ > diff --git a/include/linux/of.h b/include/linux/of.h > index 3375f5295875..7477f2266d8f 100644 > --- a/include/linux/of.h > +++ b/include/linux/of.h > @@ -562,6 +562,23 @@ struct kimage; > int of_kexec_setup_new_fdt(const struct kimage *image, void *fdt, > unsigned long initrd_load_addr, unsigned long initrd_len, > const char *cmdline); > +int ima_get_kexec_buffer(void **addr, size_t *size); > +int ima_free_kexec_buffer(void); > +void remove_ima_buffer(void *fdt, int chosen_node); > + > +#ifdef CONFIG_IMA_KEXEC > +int arch_ima_add_kexec_buffer(struct kimage *image, > + unsigned long load_addr, > + size_t size); > +int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node); This doesn't need to be public. > +#else > +static inline int setup_ima_buffer(const struct kimage *image, void *fdt, > + int chosen_node) > +{ > + remove_ima_buffer(fdt, chosen_node); > + return 0; > +} > +#endif /* CONFIG_IMA_KEXEC */ > > #else /* CONFIG_OF */ > > diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h > index 6ebefec616e4..7c3947ad3773 100644 > --- a/security/integrity/ima/ima.h > +++ b/security/integrity/ima/ima.h > @@ -24,10 +24,6 @@ > > #include "../integrity.h" > > -#ifdef CONFIG_HAVE_IMA_KEXEC > -#include <asm/ima.h> > -#endif > - > enum ima_show_type { IMA_SHOW_BINARY, IMA_SHOW_BINARY_NO_FIELD_LEN, > IMA_SHOW_BINARY_OLD_STRING_FMT, IMA_SHOW_ASCII }; > enum tpm_pcrs { TPM_PCR0 = 0, TPM_PCR8 = 8, TPM_PCR10 = 10 }; > diff --git a/security/integrity/ima/ima_kexec.c b/security/integrity/ima/ima_kexec.c > index 121de3e04af2..3d6a8820e2a5 100644 > --- a/security/integrity/ima/ima_kexec.c > +++ b/security/integrity/ima/ima_kexec.c > @@ -9,7 +9,9 @@ > > #include <linux/seq_file.h> > #include <linux/vmalloc.h> > +#include <linux/of.h> > #include <linux/kexec.h> > +#include <linux/ima.h> > #include "ima.h" > > #ifdef CONFIG_IMA_KEXEC > -- > 2.29.2 >
On 12/17/20 12:05 PM, Rob Herring wrote: > On Thu, Dec 17, 2020 at 09:37:06AM -0800, Lakshmi Ramasubramanian wrote: >> The functions defined in "arch/powerpc/kexec/ima.c" handle setting up >> and freeing the resources required to carry over the IMA measurement >> list from the current kernel to the next kernel across kexec system call. >> These functions do not have architecture specific code, but are >> currently limited to powerpc. >> >> Move setup_ima_buffer() call into of_kexec_setup_new_fdt(). >> >> Move architecture independent functions from "arch/powerpc/kexec/ima.c" >> to "drivers/of/kexec.c". Delete "arch/powerpc/kexec/ima.c" and >> "arch/powerpc/include/asm/ima.h". Remove references to the deleted files >> in powerpc and in ima. >> >> delete_fdt_mem_rsv() defined in "arch/powerpc/kexec/file_load.c" >> is not used anymore. Remove this function. > > I think this patch should come first and then patch 1. Move then rework > the code. Sure - will reorder the patches. > >> >> Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> >> --- >> arch/powerpc/include/asm/ima.h | 30 ----- >> arch/powerpc/include/asm/kexec.h | 1 - >> arch/powerpc/kexec/Makefile | 7 - >> arch/powerpc/kexec/file_load.c | 39 ------ >> arch/powerpc/kexec/ima.c | 182 -------------------------- >> drivers/of/kexec.c | 198 +++++++++++++++++++++++++++++ >> include/linux/of.h | 17 +++ >> security/integrity/ima/ima.h | 4 - >> security/integrity/ima/ima_kexec.c | 2 + >> 9 files changed, 217 insertions(+), 263 deletions(-) >> delete mode 100644 arch/powerpc/include/asm/ima.h >> delete mode 100644 arch/powerpc/kexec/ima.c >> >> diff --git a/drivers/of/kexec.c b/drivers/of/kexec.c >> index 66787be081fe..a6ab35f16dd2 100644 >> --- a/drivers/of/kexec.c >> +++ b/drivers/of/kexec.c >> @@ -10,10 +10,12 @@ >> */ >> >> #include <linux/kernel.h> >> +#include <linux/slab.h> >> #include <linux/kexec.h> >> #include <linux/libfdt.h> >> #include <linux/of.h> >> #include <linux/of_fdt.h> >> +#include <linux/memblock.h> >> #include <linux/random.h> >> #include <linux/types.h> >> >> @@ -59,6 +61,141 @@ static int fdt_find_and_del_mem_rsv(void *fdt, unsigned long start, unsigned lon >> return -ENOENT; >> } >> >> +/** >> + * get_addr_size_cells - Get address and size of root node >> + * >> + * @addr_cells: Return address of the root node >> + * @size_cells: Return size of the root node >> + * >> + * Return: 0 on success, or negative errno on error. >> + */ >> +static int get_addr_size_cells(int *addr_cells, int *size_cells) >> +{ >> + struct device_node *root; >> + >> + root = of_find_node_by_path("/"); >> + if (!root) >> + return -EINVAL; >> + >> + *addr_cells = of_n_addr_cells(root); >> + *size_cells = of_n_size_cells(root); >> + >> + of_node_put(root); >> + >> + return 0; >> +} >> + >> +/** >> + * do_get_kexec_buffer - Get address and size of device tree property >> + * >> + * @prop: Device tree property >> + * @len: Size of @prop >> + * @addr: Return address of the node >> + * @size: Return size of the node >> + * >> + * Return: 0 on success, or negative errno on error. >> + */ >> +static int do_get_kexec_buffer(const void *prop, int len, unsigned long *addr, >> + size_t *size) >> +{ >> + int ret, addr_cells, size_cells; >> + >> + ret = get_addr_size_cells(&addr_cells, &size_cells); >> + if (ret) >> + return ret; >> + >> + if (len < 4 * (addr_cells + size_cells)) >> + return -ENOENT; >> + >> + *addr = of_read_number(prop, addr_cells); >> + *size = of_read_number(prop + 4 * addr_cells, size_cells); >> + >> + return 0; >> +} >> + >> +/** >> + * ima_get_kexec_buffer - get IMA buffer from the previous kernel >> + * @addr: On successful return, set to point to the buffer contents. >> + * @size: On successful return, set to the buffer size. >> + * >> + * Return: 0 on success, negative errno on error. >> + */ >> +int ima_get_kexec_buffer(void **addr, size_t *size) >> +{ >> + int ret, len; >> + unsigned long tmp_addr; >> + size_t tmp_size; >> + const void *prop; >> + >> + prop = of_get_property(of_chosen, "linux,ima-kexec-buffer", &len); >> + if (!prop) >> + return -ENOENT; >> + >> + ret = do_get_kexec_buffer(prop, len, &tmp_addr, &tmp_size); >> + if (ret) >> + return ret; >> + >> + *addr = __va(tmp_addr); >> + *size = tmp_size; >> + >> + return 0; >> +} >> + >> +/** >> + * ima_free_kexec_buffer - free memory used by the IMA buffer >> + */ >> +int ima_free_kexec_buffer(void) >> +{ >> + int ret; >> + unsigned long addr; >> + size_t size; >> + struct property *prop; >> + >> + prop = of_find_property(of_chosen, "linux,ima-kexec-buffer", NULL); >> + if (!prop) >> + return -ENOENT; >> + >> + ret = do_get_kexec_buffer(prop->value, prop->length, &addr, &size); >> + if (ret) >> + return ret; >> + >> + ret = of_remove_property(of_chosen, prop); >> + if (ret) >> + return ret; >> + >> + return memblock_free(addr, size); >> +} >> + >> +/** >> + * remove_ima_buffer - remove the IMA buffer property and reservation from @fdt >> + * >> + * @fdt: Flattened Device Tree to update >> + * @chosen_node: Offset to the chosen node in the device tree >> + * >> + * The IMA measurement buffer is of no use to a subsequent kernel, so we always >> + * remove it from the device tree. >> + */ >> +void remove_ima_buffer(void *fdt, int chosen_node) > > static Will update. > >> +{ >> + int ret, len; >> + unsigned long addr; >> + size_t size; >> + const void *prop; >> + >> + prop = fdt_getprop(fdt, chosen_node, "linux,ima-kexec-buffer", &len); >> + if (!prop) >> + return; >> + >> + ret = do_get_kexec_buffer(prop, len, &addr, &size); >> + fdt_delprop(fdt, chosen_node, "linux,ima-kexec-buffer"); >> + if (ret) >> + return; >> + >> + ret = fdt_find_and_del_mem_rsv(fdt, addr, size); >> + if (!ret) >> + pr_debug("Removed old IMA buffer reservation.\n"); >> +} > > All the above needs to be in an '#ifdef CONFIG_IMA_KEXEC'. remove_ima_buffer() needs to be defined when CONFIG_HAVE_IMA_KEXEC is enabled. CONFIG_HAVE_IMA_KEXEC can be enabled even if CONFIG_IMA_KEXEC is not. I'll move remove_ima_buffer() under "#ifdef CONFIG_HAVE_IMA_KEXEC" in this file. > >> + >> /* >> * of_kexec_setup_new_fdt - modify /chosen and memory reservation for the next kernel >> * >> @@ -219,6 +356,10 @@ int of_kexec_setup_new_fdt(const struct kimage *image, void *fdt, >> } >> >> ret = fdt_setprop(fdt, chosen_node, "linux,booted-from-kexec", NULL, 0); >> + if (ret) >> + goto out; >> + >> + ret = setup_ima_buffer(image, fdt, fdt_path_offset(fdt, "/chosen")); >> >> out: >> if (ret) >> @@ -226,3 +367,60 @@ int of_kexec_setup_new_fdt(const struct kimage *image, void *fdt, >> >> return 0; >> } >> + >> +#ifdef CONFIG_IMA_KEXEC >> +/** >> + * arch_ima_add_kexec_buffer - do arch-specific steps to add the IMA buffer >> + * >> + * @image: kimage struct to set IMA buffer data >> + * @load_addr: Starting address where IMA buffer is loaded at >> + * @size: Number of bytes in the IMA buffer >> + * >> + * Architectures should use this function to pass on the IMA buffer >> + * information to the next kernel. >> + * >> + * Return: 0 on success, negative errno on error. >> + */ >> +int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr, >> + size_t size) > > This should be a static inline in asm/kexec.h. arch_ima_add_kexec_buffer() is identical for powerpc and arm64. Would it be better to "static inline" this function in "of.h" instead of duplicating it in "asm/kexec.h" for powerpc and arm64? > >> +{ >> + image->arch.ima_buffer_addr = load_addr; >> + image->arch.ima_buffer_size = size; >> + >> + return 0; >> +} >> + >> +/** >> + * setup_ima_buffer - add IMA buffer information to the fdt >> + * @image: kexec image being loaded. >> + * @fdt: Flattened device tree for the next kernel. >> + * @chosen_node: Offset to the chosen node. >> + * >> + * Return: 0 on success, or negative errno on error. >> + */ >> +int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node) > > static Will update. > >> +{ >> + int ret; >> + >> + remove_ima_buffer(fdt, chosen_node); >> + if (!image->arch.ima_buffer_size) >> + return 0; >> + >> + ret = fdt_appendprop_addrrange(fdt, 0, chosen_node, >> + "linux,ima-kexec-buffer", >> + image->arch.ima_buffer_addr, >> + image->arch.ima_buffer_size); >> + if (ret) >> + return (ret == -FDT_ERR_NOSPACE ? -ENOMEM : -EINVAL); >> + >> + ret = fdt_add_mem_rsv(fdt, image->arch.ima_buffer_addr, >> + image->arch.ima_buffer_size); >> + if (ret) >> + return -EINVAL; >> + >> + pr_debug("IMA buffer at 0x%llx, size = 0x%zx\n", >> + image->arch.ima_buffer_addr, image->arch.ima_buffer_size); >> + >> + return 0; >> +} >> +#endif /* CONFIG_IMA_KEXEC */ >> diff --git a/include/linux/of.h b/include/linux/of.h >> index 3375f5295875..7477f2266d8f 100644 >> --- a/include/linux/of.h >> +++ b/include/linux/of.h >> @@ -562,6 +562,23 @@ struct kimage; >> int of_kexec_setup_new_fdt(const struct kimage *image, void *fdt, >> unsigned long initrd_load_addr, unsigned long initrd_len, >> const char *cmdline); >> +int ima_get_kexec_buffer(void **addr, size_t *size); >> +int ima_free_kexec_buffer(void); >> +void remove_ima_buffer(void *fdt, int chosen_node); >> + >> +#ifdef CONFIG_IMA_KEXEC >> +int arch_ima_add_kexec_buffer(struct kimage *image, >> + unsigned long load_addr, >> + size_t size); >> +int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node); > > This doesn't need to be public. Will update. thanks, -lakshmi > >> +#else >> +static inline int setup_ima_buffer(const struct kimage *image, void *fdt, >> + int chosen_node) >> +{ >> + remove_ima_buffer(fdt, chosen_node); >> + return 0; >> +} >> +#endif /* CONFIG_IMA_KEXEC */ >> >> #else /* CONFIG_OF */ >> >> diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h >> index 6ebefec616e4..7c3947ad3773 100644 >> --- a/security/integrity/ima/ima.h >> +++ b/security/integrity/ima/ima.h >> @@ -24,10 +24,6 @@ >> >> #include "../integrity.h" >> >> -#ifdef CONFIG_HAVE_IMA_KEXEC >> -#include <asm/ima.h> >> -#endif >> - >> enum ima_show_type { IMA_SHOW_BINARY, IMA_SHOW_BINARY_NO_FIELD_LEN, >> IMA_SHOW_BINARY_OLD_STRING_FMT, IMA_SHOW_ASCII }; >> enum tpm_pcrs { TPM_PCR0 = 0, TPM_PCR8 = 8, TPM_PCR10 = 10 }; >> diff --git a/security/integrity/ima/ima_kexec.c b/security/integrity/ima/ima_kexec.c >> index 121de3e04af2..3d6a8820e2a5 100644 >> --- a/security/integrity/ima/ima_kexec.c >> +++ b/security/integrity/ima/ima_kexec.c >> @@ -9,7 +9,9 @@ >> >> #include <linux/seq_file.h> >> #include <linux/vmalloc.h> >> +#include <linux/of.h> >> #include <linux/kexec.h> >> +#include <linux/ima.h> >> #include "ima.h" >> >> #ifdef CONFIG_IMA_KEXEC >> -- >> 2.29.2 >>
On Thu, Dec 17, 2020 at 2:52 PM Lakshmi Ramasubramanian <nramas@linux.microsoft.com> wrote: > > On 12/17/20 12:05 PM, Rob Herring wrote: > > On Thu, Dec 17, 2020 at 09:37:06AM -0800, Lakshmi Ramasubramanian wrote: > >> The functions defined in "arch/powerpc/kexec/ima.c" handle setting up > >> and freeing the resources required to carry over the IMA measurement > >> list from the current kernel to the next kernel across kexec system call. > >> These functions do not have architecture specific code, but are > >> currently limited to powerpc. [...] > >> +#ifdef CONFIG_IMA_KEXEC > >> +/** > >> + * arch_ima_add_kexec_buffer - do arch-specific steps to add the IMA buffer > >> + * > >> + * @image: kimage struct to set IMA buffer data > >> + * @load_addr: Starting address where IMA buffer is loaded at > >> + * @size: Number of bytes in the IMA buffer > >> + * > >> + * Architectures should use this function to pass on the IMA buffer > >> + * information to the next kernel. > >> + * > >> + * Return: 0 on success, negative errno on error. > >> + */ > >> +int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr, > >> + size_t size) > > > > This should be a static inline in asm/kexec.h. > > arch_ima_add_kexec_buffer() is identical for powerpc and arm64. > Would it be better to "static inline" this function in "of.h" instead of > duplicating it in "asm/kexec.h" for powerpc and arm64? No, think about what it is specific to and place it there. It has nothing to do with DT really. All it is is a wrapper to access the struct members in kimage_arch. So it belongs where they are declared. Now perhaps ima_buffer_addr and ima_buffer_size shouldn't be arch specific, but that's a separate issue. Rob
On 12/17/20 2:01 PM, Rob Herring wrote: > On Thu, Dec 17, 2020 at 2:52 PM Lakshmi Ramasubramanian > <nramas@linux.microsoft.com> wrote: >> >> On 12/17/20 12:05 PM, Rob Herring wrote: >>> On Thu, Dec 17, 2020 at 09:37:06AM -0800, Lakshmi Ramasubramanian wrote: >>>> The functions defined in "arch/powerpc/kexec/ima.c" handle setting up >>>> and freeing the resources required to carry over the IMA measurement >>>> list from the current kernel to the next kernel across kexec system call. >>>> These functions do not have architecture specific code, but are >>>> currently limited to powerpc. > > [...] > >>>> +#ifdef CONFIG_IMA_KEXEC >>>> +/** >>>> + * arch_ima_add_kexec_buffer - do arch-specific steps to add the IMA buffer >>>> + * >>>> + * @image: kimage struct to set IMA buffer data >>>> + * @load_addr: Starting address where IMA buffer is loaded at >>>> + * @size: Number of bytes in the IMA buffer >>>> + * >>>> + * Architectures should use this function to pass on the IMA buffer >>>> + * information to the next kernel. >>>> + * >>>> + * Return: 0 on success, negative errno on error. >>>> + */ >>>> +int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr, >>>> + size_t size) >>> >>> This should be a static inline in asm/kexec.h. >> >> arch_ima_add_kexec_buffer() is identical for powerpc and arm64. >> Would it be better to "static inline" this function in "of.h" instead of >> duplicating it in "asm/kexec.h" for powerpc and arm64? > > No, think about what it is specific to and place it there. It has > nothing to do with DT really. All it is is a wrapper to access the > struct members in kimage_arch. So it belongs where they are declared. > Now perhaps ima_buffer_addr and ima_buffer_size shouldn't be arch > specific, but that's a separate issue. > okay - I'll move arch_ima_add_kexec_buffer() to asm/kexec.h Please let me know if you have any other comments on the patches. If you are done reviewing, I'll post the updated patches shortly. Thanks for reviewing the changes. -lakshmi
On 12/17/20 2:01 PM, Rob Herring wrote: > > [...] > >>>> +#ifdef CONFIG_IMA_KEXEC >>>> +/** >>>> + * arch_ima_add_kexec_buffer - do arch-specific steps to add the IMA buffer >>>> + * >>>> + * @image: kimage struct to set IMA buffer data >>>> + * @load_addr: Starting address where IMA buffer is loaded at >>>> + * @size: Number of bytes in the IMA buffer >>>> + * >>>> + * Architectures should use this function to pass on the IMA buffer >>>> + * information to the next kernel. >>>> + * >>>> + * Return: 0 on success, negative errno on error. >>>> + */ >>>> +int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr, >>>> + size_t size) >>> >>> This should be a static inline in asm/kexec.h. >> >> arch_ima_add_kexec_buffer() is identical for powerpc and arm64. >> Would it be better to "static inline" this function in "of.h" instead of >> duplicating it in "asm/kexec.h" for powerpc and arm64? > > No, think about what it is specific to and place it there. It has > nothing to do with DT really. All it is is a wrapper to access the > struct members in kimage_arch. So it belongs where they are declared. > Now perhaps ima_buffer_addr and ima_buffer_size shouldn't be arch > specific, but that's a separate issue. > Since "struct kimage" definition is not available in "asm/kexec.h", defining arch_ima_add_kexec_buffer() in this header file results in the following build error: ./arch/powerpc/include/asm/kexec.h: In function 'arch_ima_add_kexec_buffer': ./arch/powerpc/include/asm/kexec.h:139:7: error: 'struct kimage' has no member named 'arch' 139 | image->arch.ima_buffer_addr = load_addr; I think it would be appropriate to make arch_ima_add_kexec_buffer() a static inline function in "security/integrity/ima/ima_kexec.c" - the only file where this function is used. This will also enable sharing this function for powerpc and arm64 architectures. thanks, -lakshmi
On Fri, Dec 18, 2020 at 12:25 AM Lakshmi Ramasubramanian <nramas@linux.microsoft.com> wrote: > > On 12/17/20 2:01 PM, Rob Herring wrote: > > > > > [...] > > > >>>> +#ifdef CONFIG_IMA_KEXEC > >>>> +/** > >>>> + * arch_ima_add_kexec_buffer - do arch-specific steps to add the IMA buffer > >>>> + * > >>>> + * @image: kimage struct to set IMA buffer data > >>>> + * @load_addr: Starting address where IMA buffer is loaded at > >>>> + * @size: Number of bytes in the IMA buffer > >>>> + * > >>>> + * Architectures should use this function to pass on the IMA buffer > >>>> + * information to the next kernel. > >>>> + * > >>>> + * Return: 0 on success, negative errno on error. > >>>> + */ > >>>> +int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr, > >>>> + size_t size) > >>> > >>> This should be a static inline in asm/kexec.h. > >> > >> arch_ima_add_kexec_buffer() is identical for powerpc and arm64. > >> Would it be better to "static inline" this function in "of.h" instead of > >> duplicating it in "asm/kexec.h" for powerpc and arm64? > > > > No, think about what it is specific to and place it there. It has > > nothing to do with DT really. All it is is a wrapper to access the > > struct members in kimage_arch. So it belongs where they are declared. > > Now perhaps ima_buffer_addr and ima_buffer_size shouldn't be arch > > specific, but that's a separate issue. > > > > Since "struct kimage" definition is not available in "asm/kexec.h", > defining arch_ima_add_kexec_buffer() in this header file results in the > following build error: > > ./arch/powerpc/include/asm/kexec.h: In function 'arch_ima_add_kexec_buffer': > ./arch/powerpc/include/asm/kexec.h:139:7: error: 'struct kimage' has no > member named 'arch' > 139 | image->arch.ima_buffer_addr = load_addr; > > I think it would be appropriate to make arch_ima_add_kexec_buffer() a > static inline function in "security/integrity/ima/ima_kexec.c" - the > only file where this function is used. Even better. It doesn't need to be 'inline' then. The compiler will inline it without. Rob
diff --git a/arch/powerpc/include/asm/ima.h b/arch/powerpc/include/asm/ima.h deleted file mode 100644 index ead488cf3981..000000000000 --- a/arch/powerpc/include/asm/ima.h +++ /dev/null @@ -1,30 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_POWERPC_IMA_H -#define _ASM_POWERPC_IMA_H - -struct kimage; - -int ima_get_kexec_buffer(void **addr, size_t *size); -int ima_free_kexec_buffer(void); - -#ifdef CONFIG_IMA -void remove_ima_buffer(void *fdt, int chosen_node); -#else -static inline void remove_ima_buffer(void *fdt, int chosen_node) {} -#endif - -#ifdef CONFIG_IMA_KEXEC -int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr, - size_t size); - -int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node); -#else -static inline int setup_ima_buffer(const struct kimage *image, void *fdt, - int chosen_node) -{ - remove_ima_buffer(fdt, chosen_node); - return 0; -} -#endif /* CONFIG_IMA_KEXEC */ - -#endif /* _ASM_POWERPC_IMA_H */ diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h index dbf09d2f36d0..d4b7d2d6191d 100644 --- a/arch/powerpc/include/asm/kexec.h +++ b/arch/powerpc/include/asm/kexec.h @@ -126,7 +126,6 @@ int setup_purgatory(struct kimage *image, const void *slave_code, int setup_new_fdt(const struct kimage *image, void *fdt, unsigned long initrd_load_addr, unsigned long initrd_len, const char *cmdline); -int delete_fdt_mem_rsv(void *fdt, unsigned long start, unsigned long size); #ifdef CONFIG_PPC64 struct kexec_buf; diff --git a/arch/powerpc/kexec/Makefile b/arch/powerpc/kexec/Makefile index 4aff6846c772..b6c52608cb49 100644 --- a/arch/powerpc/kexec/Makefile +++ b/arch/powerpc/kexec/Makefile @@ -9,13 +9,6 @@ obj-$(CONFIG_PPC32) += relocate_32.o obj-$(CONFIG_KEXEC_FILE) += file_load.o ranges.o file_load_$(BITS).o elf_$(BITS).o -ifdef CONFIG_HAVE_IMA_KEXEC -ifdef CONFIG_IMA -obj-y += ima.o -endif -endif - - # Disable GCOV, KCOV & sanitizers in odd or sensitive code GCOV_PROFILE_core_$(BITS).o := n KCOV_INSTRUMENT_core_$(BITS).o := n diff --git a/arch/powerpc/kexec/file_load.c b/arch/powerpc/kexec/file_load.c index 956bcb2d1ec2..f37652ccb8a1 100644 --- a/arch/powerpc/kexec/file_load.c +++ b/arch/powerpc/kexec/file_load.c @@ -20,7 +20,6 @@ #include <linux/of_fdt.h> #include <linux/libfdt.h> #include <asm/setup.h> -#include <asm/ima.h> #define SLAVE_CODE_SIZE 256 /* First 0x100 bytes */ @@ -110,38 +109,6 @@ int setup_purgatory(struct kimage *image, const void *slave_code, return 0; } -/** - * delete_fdt_mem_rsv - delete memory reservation with given address and size - * - * Return: 0 on success, or negative errno on error. - */ -int delete_fdt_mem_rsv(void *fdt, unsigned long start, unsigned long size) -{ - int i, ret, num_rsvs = fdt_num_mem_rsv(fdt); - - for (i = 0; i < num_rsvs; i++) { - uint64_t rsv_start, rsv_size; - - ret = fdt_get_mem_rsv(fdt, i, &rsv_start, &rsv_size); - if (ret) { - pr_err("Malformed device tree.\n"); - return -EINVAL; - } - - if (rsv_start == start && rsv_size == size) { - ret = fdt_del_mem_rsv(fdt, i); - if (ret) { - pr_err("Error deleting device tree reservation.\n"); - return -EINVAL; - } - - return 0; - } - } - - return -ENOENT; -} - /* * setup_new_fdt - modify /chosen and memory reservation for the next kernel * @image: kexec image being loaded. @@ -163,12 +130,6 @@ int setup_new_fdt(const struct kimage *image, void *fdt, if (ret) goto err; - ret = setup_ima_buffer(image, fdt, fdt_path_offset(fdt, "/chosen")); - if (ret) { - pr_err("Error setting up the new device tree.\n"); - return ret; - } - return 0; err: diff --git a/arch/powerpc/kexec/ima.c b/arch/powerpc/kexec/ima.c deleted file mode 100644 index d579d3da4715..000000000000 --- a/arch/powerpc/kexec/ima.c +++ /dev/null @@ -1,182 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2016 IBM Corporation - * - * Authors: - * Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> - */ - -#include <linux/slab.h> -#include <linux/kexec.h> -#include <linux/of.h> -#include <linux/memblock.h> -#include <linux/libfdt.h> -#include <asm/ima.h> - -static int get_addr_size_cells(int *addr_cells, int *size_cells) -{ - struct device_node *root; - - root = of_find_node_by_path("/"); - if (!root) - return -EINVAL; - - *addr_cells = of_n_addr_cells(root); - *size_cells = of_n_size_cells(root); - - of_node_put(root); - - return 0; -} - -static int do_get_kexec_buffer(const void *prop, int len, unsigned long *addr, - size_t *size) -{ - int ret, addr_cells, size_cells; - - ret = get_addr_size_cells(&addr_cells, &size_cells); - if (ret) - return ret; - - if (len < 4 * (addr_cells + size_cells)) - return -ENOENT; - - *addr = of_read_number(prop, addr_cells); - *size = of_read_number(prop + 4 * addr_cells, size_cells); - - return 0; -} - -/** - * ima_get_kexec_buffer - get IMA buffer from the previous kernel - * @addr: On successful return, set to point to the buffer contents. - * @size: On successful return, set to the buffer size. - * - * Return: 0 on success, negative errno on error. - */ -int ima_get_kexec_buffer(void **addr, size_t *size) -{ - int ret, len; - unsigned long tmp_addr; - size_t tmp_size; - const void *prop; - - prop = of_get_property(of_chosen, "linux,ima-kexec-buffer", &len); - if (!prop) - return -ENOENT; - - ret = do_get_kexec_buffer(prop, len, &tmp_addr, &tmp_size); - if (ret) - return ret; - - *addr = __va(tmp_addr); - *size = tmp_size; - - return 0; -} - -/** - * ima_free_kexec_buffer - free memory used by the IMA buffer - */ -int ima_free_kexec_buffer(void) -{ - int ret; - unsigned long addr; - size_t size; - struct property *prop; - - prop = of_find_property(of_chosen, "linux,ima-kexec-buffer", NULL); - if (!prop) - return -ENOENT; - - ret = do_get_kexec_buffer(prop->value, prop->length, &addr, &size); - if (ret) - return ret; - - ret = of_remove_property(of_chosen, prop); - if (ret) - return ret; - - return memblock_free(addr, size); - -} - -/** - * remove_ima_buffer - remove the IMA buffer property and reservation from @fdt - * - * The IMA measurement buffer is of no use to a subsequent kernel, so we always - * remove it from the device tree. - */ -void remove_ima_buffer(void *fdt, int chosen_node) -{ - int ret, len; - unsigned long addr; - size_t size; - const void *prop; - - prop = fdt_getprop(fdt, chosen_node, "linux,ima-kexec-buffer", &len); - if (!prop) - return; - - ret = do_get_kexec_buffer(prop, len, &addr, &size); - fdt_delprop(fdt, chosen_node, "linux,ima-kexec-buffer"); - if (ret) - return; - - ret = delete_fdt_mem_rsv(fdt, addr, size); - if (!ret) - pr_debug("Removed old IMA buffer reservation.\n"); -} - -#ifdef CONFIG_IMA_KEXEC -/** - * arch_ima_add_kexec_buffer - do arch-specific steps to add the IMA buffer - * - * Architectures should use this function to pass on the IMA buffer - * information to the next kernel. - * - * Return: 0 on success, negative errno on error. - */ -int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr, - size_t size) -{ - image->arch.ima_buffer_addr = load_addr; - image->arch.ima_buffer_size = size; - - return 0; -} - -/** - * setup_ima_buffer - add IMA buffer information to the fdt - * @image: kexec image being loaded. - * @fdt: Flattened device tree for the next kernel. - * @chosen_node: Offset to the chosen node. - * - * Return: 0 on success, or negative errno on error. - */ -int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node) -{ - int ret; - - remove_ima_buffer(fdt, chosen_node); - if (!image->arch.ima_buffer_size) - return 0; - - ret = fdt_appendprop_addrrange(fdt, 0, chosen_node, - "linux,ima-kexec-buffer", - image->arch.ima_buffer_addr, - image->arch.ima_buffer_size); - if (ret) - return (ret == -FDT_ERR_NOSPACE ? -ENOMEM : -EINVAL); - - ret = fdt_add_mem_rsv(fdt, image->arch.ima_buffer_addr, - image->arch.ima_buffer_size); - if (ret) - return -EINVAL; - - pr_debug("IMA buffer at 0x%llx, size = 0x%zx\n", - image->arch.ima_buffer_addr, image->arch.ima_buffer_size); - - return 0; -} -#endif /* CONFIG_IMA_KEXEC */ diff --git a/drivers/of/kexec.c b/drivers/of/kexec.c index 66787be081fe..a6ab35f16dd2 100644 --- a/drivers/of/kexec.c +++ b/drivers/of/kexec.c @@ -10,10 +10,12 @@ */ #include <linux/kernel.h> +#include <linux/slab.h> #include <linux/kexec.h> #include <linux/libfdt.h> #include <linux/of.h> #include <linux/of_fdt.h> +#include <linux/memblock.h> #include <linux/random.h> #include <linux/types.h> @@ -59,6 +61,141 @@ static int fdt_find_and_del_mem_rsv(void *fdt, unsigned long start, unsigned lon return -ENOENT; } +/** + * get_addr_size_cells - Get address and size of root node + * + * @addr_cells: Return address of the root node + * @size_cells: Return size of the root node + * + * Return: 0 on success, or negative errno on error. + */ +static int get_addr_size_cells(int *addr_cells, int *size_cells) +{ + struct device_node *root; + + root = of_find_node_by_path("/"); + if (!root) + return -EINVAL; + + *addr_cells = of_n_addr_cells(root); + *size_cells = of_n_size_cells(root); + + of_node_put(root); + + return 0; +} + +/** + * do_get_kexec_buffer - Get address and size of device tree property + * + * @prop: Device tree property + * @len: Size of @prop + * @addr: Return address of the node + * @size: Return size of the node + * + * Return: 0 on success, or negative errno on error. + */ +static int do_get_kexec_buffer(const void *prop, int len, unsigned long *addr, + size_t *size) +{ + int ret, addr_cells, size_cells; + + ret = get_addr_size_cells(&addr_cells, &size_cells); + if (ret) + return ret; + + if (len < 4 * (addr_cells + size_cells)) + return -ENOENT; + + *addr = of_read_number(prop, addr_cells); + *size = of_read_number(prop + 4 * addr_cells, size_cells); + + return 0; +} + +/** + * ima_get_kexec_buffer - get IMA buffer from the previous kernel + * @addr: On successful return, set to point to the buffer contents. + * @size: On successful return, set to the buffer size. + * + * Return: 0 on success, negative errno on error. + */ +int ima_get_kexec_buffer(void **addr, size_t *size) +{ + int ret, len; + unsigned long tmp_addr; + size_t tmp_size; + const void *prop; + + prop = of_get_property(of_chosen, "linux,ima-kexec-buffer", &len); + if (!prop) + return -ENOENT; + + ret = do_get_kexec_buffer(prop, len, &tmp_addr, &tmp_size); + if (ret) + return ret; + + *addr = __va(tmp_addr); + *size = tmp_size; + + return 0; +} + +/** + * ima_free_kexec_buffer - free memory used by the IMA buffer + */ +int ima_free_kexec_buffer(void) +{ + int ret; + unsigned long addr; + size_t size; + struct property *prop; + + prop = of_find_property(of_chosen, "linux,ima-kexec-buffer", NULL); + if (!prop) + return -ENOENT; + + ret = do_get_kexec_buffer(prop->value, prop->length, &addr, &size); + if (ret) + return ret; + + ret = of_remove_property(of_chosen, prop); + if (ret) + return ret; + + return memblock_free(addr, size); +} + +/** + * remove_ima_buffer - remove the IMA buffer property and reservation from @fdt + * + * @fdt: Flattened Device Tree to update + * @chosen_node: Offset to the chosen node in the device tree + * + * The IMA measurement buffer is of no use to a subsequent kernel, so we always + * remove it from the device tree. + */ +void remove_ima_buffer(void *fdt, int chosen_node) +{ + int ret, len; + unsigned long addr; + size_t size; + const void *prop; + + prop = fdt_getprop(fdt, chosen_node, "linux,ima-kexec-buffer", &len); + if (!prop) + return; + + ret = do_get_kexec_buffer(prop, len, &addr, &size); + fdt_delprop(fdt, chosen_node, "linux,ima-kexec-buffer"); + if (ret) + return; + + ret = fdt_find_and_del_mem_rsv(fdt, addr, size); + if (!ret) + pr_debug("Removed old IMA buffer reservation.\n"); +} + /* * of_kexec_setup_new_fdt - modify /chosen and memory reservation for the next kernel * @@ -219,6 +356,10 @@ int of_kexec_setup_new_fdt(const struct kimage *image, void *fdt, } ret = fdt_setprop(fdt, chosen_node, "linux,booted-from-kexec", NULL, 0); + if (ret) + goto out; + + ret = setup_ima_buffer(image, fdt, fdt_path_offset(fdt, "/chosen")); out: if (ret) @@ -226,3 +367,60 @@ int of_kexec_setup_new_fdt(const struct kimage *image, void *fdt, return 0; } + +#ifdef CONFIG_IMA_KEXEC +/** + * arch_ima_add_kexec_buffer - do arch-specific steps to add the IMA buffer + * + * @image: kimage struct to set IMA buffer data + * @load_addr: Starting address where IMA buffer is loaded at + * @size: Number of bytes in the IMA buffer + * + * Architectures should use this function to pass on the IMA buffer + * information to the next kernel. + * + * Return: 0 on success, negative errno on error. + */ +int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr, + size_t size) +{ + image->arch.ima_buffer_addr = load_addr; + image->arch.ima_buffer_size = size; + + return 0; +} + +/** + * setup_ima_buffer - add IMA buffer information to the fdt + * @image: kexec image being loaded. + * @fdt: Flattened device tree for the next kernel. + * @chosen_node: Offset to the chosen node. + * + * Return: 0 on success, or negative errno on error. + */ +int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node) +{ + int ret; + + remove_ima_buffer(fdt, chosen_node); + if (!image->arch.ima_buffer_size) + return 0; + + ret = fdt_appendprop_addrrange(fdt, 0, chosen_node, + "linux,ima-kexec-buffer", + image->arch.ima_buffer_addr, + image->arch.ima_buffer_size); + if (ret) + return (ret == -FDT_ERR_NOSPACE ? -ENOMEM : -EINVAL); + + ret = fdt_add_mem_rsv(fdt, image->arch.ima_buffer_addr, + image->arch.ima_buffer_size); + if (ret) + return -EINVAL; + + pr_debug("IMA buffer at 0x%llx, size = 0x%zx\n", + image->arch.ima_buffer_addr, image->arch.ima_buffer_size); + + return 0; +} +#endif /* CONFIG_IMA_KEXEC */ diff --git a/include/linux/of.h b/include/linux/of.h index 3375f5295875..7477f2266d8f 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -562,6 +562,23 @@ struct kimage; int of_kexec_setup_new_fdt(const struct kimage *image, void *fdt, unsigned long initrd_load_addr, unsigned long initrd_len, const char *cmdline); +int ima_get_kexec_buffer(void **addr, size_t *size); +int ima_free_kexec_buffer(void); +void remove_ima_buffer(void *fdt, int chosen_node); + +#ifdef CONFIG_IMA_KEXEC +int arch_ima_add_kexec_buffer(struct kimage *image, + unsigned long load_addr, + size_t size); +int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node); +#else +static inline int setup_ima_buffer(const struct kimage *image, void *fdt, + int chosen_node) +{ + remove_ima_buffer(fdt, chosen_node); + return 0; +} +#endif /* CONFIG_IMA_KEXEC */ #else /* CONFIG_OF */ diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h index 6ebefec616e4..7c3947ad3773 100644 --- a/security/integrity/ima/ima.h +++ b/security/integrity/ima/ima.h @@ -24,10 +24,6 @@ #include "../integrity.h" -#ifdef CONFIG_HAVE_IMA_KEXEC -#include <asm/ima.h> -#endif - enum ima_show_type { IMA_SHOW_BINARY, IMA_SHOW_BINARY_NO_FIELD_LEN, IMA_SHOW_BINARY_OLD_STRING_FMT, IMA_SHOW_ASCII }; enum tpm_pcrs { TPM_PCR0 = 0, TPM_PCR8 = 8, TPM_PCR10 = 10 }; diff --git a/security/integrity/ima/ima_kexec.c b/security/integrity/ima/ima_kexec.c index 121de3e04af2..3d6a8820e2a5 100644 --- a/security/integrity/ima/ima_kexec.c +++ b/security/integrity/ima/ima_kexec.c @@ -9,7 +9,9 @@ #include <linux/seq_file.h> #include <linux/vmalloc.h> +#include <linux/of.h> #include <linux/kexec.h> +#include <linux/ima.h> #include "ima.h" #ifdef CONFIG_IMA_KEXEC
The functions defined in "arch/powerpc/kexec/ima.c" handle setting up and freeing the resources required to carry over the IMA measurement list from the current kernel to the next kernel across kexec system call. These functions do not have architecture specific code, but are currently limited to powerpc. Move setup_ima_buffer() call into of_kexec_setup_new_fdt(). Move architecture independent functions from "arch/powerpc/kexec/ima.c" to "drivers/of/kexec.c". Delete "arch/powerpc/kexec/ima.c" and "arch/powerpc/include/asm/ima.h". Remove references to the deleted files in powerpc and in ima. delete_fdt_mem_rsv() defined in "arch/powerpc/kexec/file_load.c" is not used anymore. Remove this function. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> --- arch/powerpc/include/asm/ima.h | 30 ----- arch/powerpc/include/asm/kexec.h | 1 - arch/powerpc/kexec/Makefile | 7 - arch/powerpc/kexec/file_load.c | 39 ------ arch/powerpc/kexec/ima.c | 182 -------------------------- drivers/of/kexec.c | 198 +++++++++++++++++++++++++++++ include/linux/of.h | 17 +++ security/integrity/ima/ima.h | 4 - security/integrity/ima/ima_kexec.c | 2 + 9 files changed, 217 insertions(+), 263 deletions(-) delete mode 100644 arch/powerpc/include/asm/ima.h delete mode 100644 arch/powerpc/kexec/ima.c