| Message ID | 1608629682-8535-4-git-send-email-chunfeng.yun@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [RFC,v3,1/5] usb: xhci-mtk: improve bandwidth scheduling with multi-TT | expand |
On Tue, Dec 22, 2020 at 5:35 PM Chunfeng Yun <chunfeng.yun@mediatek.com> wrote: > > From: CK Hu <ck.hu@mediatek.com> > > add support runtime pm feature > > Signed-off-by: Zhanyong Wang <zhanyong.wang@mediatek.com> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > --- > v3: > 1. fix some issues > 2. remove attribute files > > v2: fix error caused by request irq suggested by CK > --- > drivers/usb/host/xhci-mtk.c | 285 +++++++++++++++++++++++++++++++++++- > drivers/usb/host/xhci-mtk.h | 14 ++ > 2 files changed, 294 insertions(+), 5 deletions(-) > mode change 100755 => 100644 drivers/usb/host/xhci-mtk.c > > diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c > old mode 100755 > new mode 100644 > index 34bd3de090b1..c07d54acbcb7 > --- a/drivers/usb/host/xhci-mtk.c > +++ b/drivers/usb/host/xhci-mtk.c > @@ -14,6 +14,7 @@ > #include <linux/mfd/syscon.h> > #include <linux/module.h> > #include <linux/of.h> > +#include <linux/of_irq.h> > #include <linux/platform_device.h> > #include <linux/pm_runtime.h> > #include <linux/regmap.h> > @@ -77,6 +78,72 @@ enum ssusb_uwk_vers { > SSUSB_UWK_V3, > }; > > +int xhci_mtk_runtime_ready; > + > +static int xhci_mtk_runtime_resume(struct device *dev); > + > +static void xhci_mtk_seal_work(struct work_struct *work) > +{ > + struct xhci_hcd_mtk *mtk = > + container_of(work, struct xhci_hcd_mtk, seal.work); > + struct usb_hcd *hcd = mtk->hcd; > + struct xhci_hcd *xhci = hcd_to_xhci(hcd); > + > + xhci_dbg(xhci, "spm unseals xHCI controller %i\n", mtk->seal_status); > + if (mtk->seal_status == SEAL_SUSPENDED) { > + mtk->seal_status = SEAL_RESUMING; > + pm_runtime_mark_last_busy(mtk->dev); > + pm_runtime_put_sync_autosuspend(mtk->dev); If I understand correctly, this function is for waking up the device but this function calls put() only without get(). > + } else { > + /* > + * FIXME: Sometimes seal_status will keep it on SEAL_RESUMING staus not to expect > + * since pm_runtime_put_sync_autosuspend doesn't invoke runtime_resume of callback. > + * and to survey why not to invoke runtime_resume callback named > + * xhci_mtk_runtime_resume in time in short feature, Herely provide one solution > + * that make sure seal_status to match h/w state machine,and MTK xHCI clocks > + * on as soon as unseal event received. I guess actual resuming should be happened only from the 1st interrupt (when in SEAL_SUSPENDED) and following spurious interrupts can be just ignored. > + */ > + if (mtk->seal_status == SEAL_RESUMING) > + xhci_mtk_runtime_resume(mtk->dev); xhci_mtk_runtime_resume() is defined as a runtime pm callback, pm core will call that callback when pm usage counter reaches to zero. > + else > + xhci_warn(xhci, > + "Ignore seal wakeup source disordered in xHCI controller\n"); > + } > +} > + > +static irqreturn_t xhci_mtk_seal_irq(int irq, void *data) > +{ > + struct xhci_hcd_mtk *mtk = data; > + struct usb_hcd *hcd = mtk->hcd; > + struct xhci_hcd *xhci = hcd_to_xhci(hcd); > + > + xhci_dbg(xhci, "seal irq ISR invoked\n"); > + > + schedule_delayed_work(&mtk->seal, 0); > + > + return IRQ_HANDLED; > +} > + > +static void xhci_mtk_seal_wakeup_enable(struct xhci_hcd_mtk *mtk, bool enable) > +{ > + struct irq_desc *desc; > + struct device *dev = mtk->dev; > + > + if (mtk && mtk->seal_irq) { > + desc = irq_to_desc(mtk->seal_irq); > + if (enable) { > + desc->irq_data.chip->irq_ack(&desc->irq_data); > + enable_irq(mtk->seal_irq); > + dev_dbg(dev, "%s: enable_irq %i\n", > + __func__, mtk->seal_irq); > + } else { > + disable_irq(mtk->seal_irq); > + dev_dbg(dev, "%s: disable_irq %i\n", > + __func__, mtk->seal_irq); > + } > + } > +} > + I think this is unnecessary if this driver can check the current state and ignore the spurious irqs if spm sometimes triggers the wake-up irqs. > static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk) > { > struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs; > @@ -347,7 +414,6 @@ static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk, > mtk->uwk_reg_base, mtk->uwk_vers); > > return PTR_ERR_OR_ZERO(mtk->uwk); > - > } > > static void usb_wakeup_set(struct xhci_hcd_mtk *mtk, bool enable) > @@ -482,9 +548,11 @@ static int xhci_mtk_probe(struct platform_device *pdev) > return ret; > } > > + pm_runtime_set_active(dev); > + pm_runtime_use_autosuspend(dev); > + pm_runtime_set_autosuspend_delay(dev, > + CONFIG_USB_AUTOSUSPEND_DELAY * 1000); > pm_runtime_enable(dev); > - pm_runtime_get_sync(dev); The only one left pm_runtime_get() is removed by here, now this driver only calls pm_runtime_put(). > - device_enable_async_suspend(dev); > > ret = xhci_mtk_ldos_enable(mtk); > if (ret) > @@ -499,6 +567,14 @@ static int xhci_mtk_probe(struct platform_device *pdev) > ret = irq; > goto disable_clk; > } > + dev_dbg(dev, "irq %i\n", irq); > + > + mtk->seal_irq = platform_get_irq_optional(pdev, 1); > + if (mtk->seal_irq < 0) { > + ret = mtk->seal_irq; > + goto disable_clk; > + } > + dev_dbg(dev, "seal_irq %i\n", mtk->seal_irq); > > hcd = usb_create_hcd(driver, dev, dev_name(dev)); > if (!hcd) { > @@ -565,6 +641,27 @@ static int xhci_mtk_probe(struct platform_device *pdev) > if (ret) > goto dealloc_usb2_hcd; > > + INIT_DELAYED_WORK(&mtk->seal, xhci_mtk_seal_work); > + snprintf(mtk->seal_descr, sizeof(mtk->seal_descr), "seal%s:usb%d", > + hcd->driver->description, hcd->self.busnum); > + ret = devm_request_irq(dev, mtk->seal_irq, &xhci_mtk_seal_irq, > + IRQF_TRIGGER_FALLING, mtk->seal_descr, mtk); > + if (ret != 0) { > + dev_err(dev, "seal request interrupt %d failed\n", > + mtk->seal_irq); > + goto dealloc_usb2_hcd; > + } > + xhci_mtk_seal_wakeup_enable(mtk, false); > + > + device_enable_async_suspend(dev); > + xhci_mtk_runtime_ready = 1; > + > + pm_runtime_mark_last_busy(dev); > + pm_runtime_put_autosuspend(dev); I expect the usage count will be -1 by here in probe. > + > + dev_dbg(dev, "%s: xhci_mtk_runtime_ready %i", > + __func__, xhci_mtk_runtime_ready); > + > return 0; > > dealloc_usb2_hcd: > @@ -587,7 +684,7 @@ static int xhci_mtk_probe(struct platform_device *pdev) > xhci_mtk_ldos_disable(mtk); > > disable_pm: > - pm_runtime_put_sync(dev); > + pm_runtime_put_sync_autosuspend(dev); > pm_runtime_disable(dev); > return ret; > } > @@ -602,6 +699,7 @@ static int xhci_mtk_remove(struct platform_device *dev) > pm_runtime_put_noidle(&dev->dev); > pm_runtime_disable(&dev->dev); > > + xhci_mtk_runtime_ready = 0; > usb_remove_hcd(shared_hcd); > xhci->shared_hcd = NULL; > device_init_wakeup(&dev->dev, false); > @@ -638,6 +736,7 @@ static int __maybe_unused xhci_mtk_suspend(struct device *dev) > xhci_mtk_host_disable(mtk); > xhci_mtk_clks_disable(mtk); > usb_wakeup_set(mtk, true); > + > return 0; > } > > @@ -659,10 +758,185 @@ static int __maybe_unused xhci_mtk_resume(struct device *dev) > return 0; > } > > +static int __maybe_unused xhci_mtk_bus_status(struct device *dev) > +{ > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > + struct usb_hcd *hcd; > + struct xhci_hcd *xhci; > + struct xhci_hub *usb2_rhub; > + struct xhci_hub *usb3_rhub; > + struct xhci_bus_state *bus_state; > + struct xhci_port *port; > + u32 usb2_suspended_ports = -1; > + u32 usb3_suspended_ports = -1; > + u16 status; > + int num_ports; > + int ret = 0; > + int i; > + > + if (!mtk->hcd) > + return -ESHUTDOWN; > + > + hcd = mtk->hcd; > + xhci = hcd_to_xhci(hcd); > + if ((xhci->xhc_state & XHCI_STATE_REMOVING) || > + (xhci->xhc_state & XHCI_STATE_HALTED)) { > + return -ESHUTDOWN; > + } This is duplicated from xhci_mtk_runtime_suspend() > + > + usb2_rhub = &xhci->usb2_rhub; > + if (usb2_rhub) { > + bus_state = &usb2_rhub->bus_state; > + num_ports = usb2_rhub->num_ports; > + usb2_suspended_ports = bus_state->suspended_ports; > + usb2_suspended_ports ^= (BIT(num_ports) - 1); > + usb2_suspended_ports &= (BIT(num_ports) - 1); > + for (i = 0; i < num_ports; i++) { > + if (usb2_suspended_ports & (1UL << i)) { > + port = usb2_rhub->ports[i]; > + status = readl(port->addr); > + > + xhci_dbg(xhci, > + "USB20: portsc[%i]: 0x%04X\n", > + i, status); > + > + if (!(status & PORT_CONNECT)) > + usb2_suspended_ports &= ~(1UL << i); > + } > + } > + > + if (usb2_suspended_ports) { > + ret = -EBUSY; > + goto ebusy; > + } > + } > + > + usb3_rhub = &xhci->usb3_rhub; > + if (usb3_rhub) { > + bus_state = &usb3_rhub->bus_state; > + num_ports = usb3_rhub->num_ports; > + usb3_suspended_ports = bus_state->suspended_ports; > + usb3_suspended_ports ^= (BIT(num_ports) - 1); > + usb3_suspended_ports &= (BIT(num_ports) - 1); > + for (i = 0; i < num_ports; i++) { > + if (usb3_suspended_ports & BIT(i)) { > + port = usb3_rhub->ports[i]; > + status = readl(port->addr); > + > + xhci_dbg(xhci, "USB3: portsc[%i]: 0x%04X\n", > + i, status); > + > + if (!(status & PORT_CONNECT)) > + usb3_suspended_ports &= ~BIT(i); > + } > + } > + > + if (usb3_suspended_ports) { > + ret = -EBUSY; > + goto ebusy; > + } > + } > + > +ebusy: > + xhci_dbg(xhci, "%s: USB2: 0x%08X, USB3: 0x%08X ret: %i\n", > + __func__, usb2_suspended_ports, > + usb3_suspended_ports, ret); > + > + return ret; > +} > + This is basically counting active ports by directly reading portsc register? I expect this function never return -EBUSY if you balance pm usage counter well. Are there any specific reasons of doing this manually? > +static int __maybe_unused xhci_mtk_runtime_suspend(struct device *dev) > +{ > + bool wakeup = device_may_wakeup(dev); > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > + struct usb_hcd *hcd; > + struct xhci_hcd *xhci; > + int ret = 0; > + > + if (!mtk->hcd) > + return -ESHUTDOWN; > + > + hcd = mtk->hcd; > + xhci = hcd_to_xhci(hcd); > + if ((xhci->xhc_state & XHCI_STATE_REMOVING) || > + (xhci->xhc_state & XHCI_STATE_HALTED)) { > + return -ESHUTDOWN; > + } > + > + mtk->seal_status = SEAL_BUSY; > + ret = xhci_mtk_bus_status(dev); > + if (wakeup && !ret) { > + mtk->seal_status = SEAL_SUSPENDING; > + xhci_mtk_suspend(dev); > + xhci_mtk_seal_wakeup_enable(mtk, true); > + mtk->seal_status = SEAL_SUSPENDED; > + xhci_dbg(xhci, "%s: seals xHCI controller\n", __func__); > + } > + > + xhci_dbg(xhci, "%s: seals wakeup = %i, ret = %i!\n", > + __func__, wakeup, ret); > + > + return ret; > +} > + > +static int __maybe_unused xhci_mtk_runtime_resume(struct device *dev) > +{ > + bool wakeup = device_may_wakeup(dev); > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > + struct usb_hcd *hcd; > + struct xhci_hcd *xhci; > + > + if (!mtk->hcd) > + return -ESHUTDOWN; > + > + hcd = mtk->hcd; > + xhci = hcd_to_xhci(hcd); > + if ((xhci->xhc_state & XHCI_STATE_REMOVING) || > + (xhci->xhc_state & XHCI_STATE_HALTED)) { > + return -ESHUTDOWN; > + } > + > + /* > + * list cases by one extra interrupt named seal to process!!! > + * Who to process these module reinitilization after SPM wakeup > + * case 1: usb remote wakeup, therefore xHCI need reinitilizate also. > + * case 2: other-wakeup-source wakeup, therefore, xHCI need reinit > + * case 3: usb client driver can invoke it in runtime mechanism > + * case 4: user active > + */ > + if (wakeup) { > + xhci_mtk_seal_wakeup_enable(mtk, false); > + xhci_mtk_resume(dev); > + xhci_dbg(xhci, "%s: unseals xHCI controller\n", __func__); > + } > + mtk->seal_status = SEAL_RESUMED; > + > + xhci_dbg(xhci, "%s: unseals wakeup = %i\n", __func__, wakeup); > + > + return 0; > +} > + > +static int __maybe_unused xhci_mtk_runtime_idle(struct device *dev) > +{ > + int ret = 0; > + > + dev_dbg(dev, "%s: xhci_mtk_runtime_ready %i", > + __func__, xhci_mtk_runtime_ready); > + > + if (!xhci_mtk_runtime_ready) > + ret = -EAGAIN; > + > + return ret; > +} > + > static const struct dev_pm_ops xhci_mtk_pm_ops = { > SET_SYSTEM_SLEEP_PM_OPS(xhci_mtk_suspend, xhci_mtk_resume) > + SET_RUNTIME_PM_OPS(xhci_mtk_runtime_suspend, > + xhci_mtk_runtime_resume, > + xhci_mtk_runtime_idle) > }; > -#define DEV_PM_OPS IS_ENABLED(CONFIG_PM) ? &xhci_mtk_pm_ops : NULL > + > +#define DEV_PM_OPS (IS_ENABLED(CONFIG_PM) ? &xhci_mtk_pm_ops : NULL) > > #ifdef CONFIG_OF > static const struct of_device_id mtk_xhci_of_match[] = { > @@ -686,6 +960,7 @@ MODULE_ALIAS("platform:xhci-mtk"); > > static int __init xhci_mtk_init(void) > { > + xhci_mtk_runtime_ready = 0; > xhci_init_driver(&xhci_mtk_hc_driver, &xhci_mtk_overrides); > return platform_driver_register(&mtk_xhci_driver); > } > diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h > index 323b281933b9..103d83ce6a3e 100644 > --- a/drivers/usb/host/xhci-mtk.h > +++ b/drivers/usb/host/xhci-mtk.h > @@ -133,6 +133,14 @@ struct mu3c_ippc_regs { > __le32 reserved3[33]; /* 0x80 ~ 0xff */ > }; > > +enum xhci_mtk_seal { > + SEAL_BUSY = 0, > + SEAL_SUSPENDING, > + SEAL_SUSPENDED, > + SEAL_RESUMING, > + SEAL_RESUMED > +}; > + > struct xhci_hcd_mtk { > struct device *dev; > struct usb_hcd *hcd; > @@ -158,6 +166,12 @@ struct xhci_hcd_mtk { > struct regmap *uwk; > u32 uwk_reg_base; > u32 uwk_vers; > + > + /* usb eint wakeup source */ > + int seal_irq; > + enum xhci_mtk_seal seal_status; > + struct delayed_work seal; > + char seal_descr[32]; /* "seal" + driver + bus # */ > }; > > static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd) > -- > 2.18.0 >
Hi Ikjoon, I try to rebuild the code flow, and want to apply the framework from wakeirq.c On Tue, 2020-12-29 at 15:38 +0800, Ikjoon Jang wrote: > On Tue, Dec 22, 2020 at 5:35 PM Chunfeng Yun <chunfeng.yun@mediatek.com> wrote: > > > > From: CK Hu <ck.hu@mediatek.com> > > > > add support runtime pm feature > > > > Signed-off-by: Zhanyong Wang <zhanyong.wang@mediatek.com> > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > > --- > > v3: > > 1. fix some issues > > 2. remove attribute files > > > > v2: fix error caused by request irq suggested by CK > > --- > > drivers/usb/host/xhci-mtk.c | 285 +++++++++++++++++++++++++++++++++++- > > drivers/usb/host/xhci-mtk.h | 14 ++ > > 2 files changed, 294 insertions(+), 5 deletions(-) > > mode change 100755 => 100644 drivers/usb/host/xhci-mtk.c > > > > diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c > > old mode 100755 > > new mode 100644 > > index 34bd3de090b1..c07d54acbcb7 > > --- a/drivers/usb/host/xhci-mtk.c > > +++ b/drivers/usb/host/xhci-mtk.c > > @@ -14,6 +14,7 @@ > > #include <linux/mfd/syscon.h> > > #include <linux/module.h> > > #include <linux/of.h> > > +#include <linux/of_irq.h> > > #include <linux/platform_device.h> > > #include <linux/pm_runtime.h> > > #include <linux/regmap.h> > > @@ -77,6 +78,72 @@ enum ssusb_uwk_vers { > > SSUSB_UWK_V3, > > }; > > > > +int xhci_mtk_runtime_ready; > > + > > +static int xhci_mtk_runtime_resume(struct device *dev); > > + > > +static void xhci_mtk_seal_work(struct work_struct *work) > > +{ > > + struct xhci_hcd_mtk *mtk = > > + container_of(work, struct xhci_hcd_mtk, seal.work); > > + struct usb_hcd *hcd = mtk->hcd; > > + struct xhci_hcd *xhci = hcd_to_xhci(hcd); > > + > > + xhci_dbg(xhci, "spm unseals xHCI controller %i\n", mtk->seal_status); > > + if (mtk->seal_status == SEAL_SUSPENDED) { > > + mtk->seal_status = SEAL_RESUMING; > > + pm_runtime_mark_last_busy(mtk->dev); > > + pm_runtime_put_sync_autosuspend(mtk->dev); > > If I understand correctly, this function is for waking up the device > but this function calls put() only without get(). will use pm_request_resume(); > > > + } else { > > + /* > > + * FIXME: Sometimes seal_status will keep it on SEAL_RESUMING staus not to expect > > + * since pm_runtime_put_sync_autosuspend doesn't invoke runtime_resume of callback. > > + * and to survey why not to invoke runtime_resume callback named > > + * xhci_mtk_runtime_resume in time in short feature, Herely provide one solution > > + * that make sure seal_status to match h/w state machine,and MTK xHCI clocks > > + * on as soon as unseal event received. > > I guess actual resuming should be happened only from the 1st interrupt > (when in SEAL_SUSPENDED) > and following spurious interrupts can be just ignored. Yes > > > + */ > > + if (mtk->seal_status == SEAL_RESUMING) > > + xhci_mtk_runtime_resume(mtk->dev); > > xhci_mtk_runtime_resume() is defined as a runtime pm callback, > pm core will call that callback when pm usage counter reaches to zero. Yes > > > + else > > + xhci_warn(xhci, > > + "Ignore seal wakeup source disordered in xHCI controller\n"); > > + } > > +} > > + > > +static irqreturn_t xhci_mtk_seal_irq(int irq, void *data) > > +{ > > + struct xhci_hcd_mtk *mtk = data; > > + struct usb_hcd *hcd = mtk->hcd; > > + struct xhci_hcd *xhci = hcd_to_xhci(hcd); > > + > > + xhci_dbg(xhci, "seal irq ISR invoked\n"); > > + > > + schedule_delayed_work(&mtk->seal, 0); > > + > > + return IRQ_HANDLED; > > +} > > + > > +static void xhci_mtk_seal_wakeup_enable(struct xhci_hcd_mtk *mtk, bool enable) > > +{ > > + struct irq_desc *desc; > > + struct device *dev = mtk->dev; > > + > > + if (mtk && mtk->seal_irq) { > > + desc = irq_to_desc(mtk->seal_irq); > > + if (enable) { > > + desc->irq_data.chip->irq_ack(&desc->irq_data); > > + enable_irq(mtk->seal_irq); > > + dev_dbg(dev, "%s: enable_irq %i\n", > > + __func__, mtk->seal_irq); > > + } else { > > + disable_irq(mtk->seal_irq); > > + dev_dbg(dev, "%s: disable_irq %i\n", > > + __func__, mtk->seal_irq); > > + } > > + } > > +} > > + > > I think this is unnecessary if this driver can check the current state > and ignore the spurious irqs if spm sometimes triggers the wake-up irqs. It helps to reduce some irqs, there are many spurious interrupts, I think there is something wrong from the point of HW, will try to find the root cause. > > > static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk) > > { > > struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs; > > @@ -347,7 +414,6 @@ static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk, > > mtk->uwk_reg_base, mtk->uwk_vers); > > > > return PTR_ERR_OR_ZERO(mtk->uwk); > > - > > } > > > > static void usb_wakeup_set(struct xhci_hcd_mtk *mtk, bool enable) > > @@ -482,9 +548,11 @@ static int xhci_mtk_probe(struct platform_device *pdev) > > return ret; > > } > > > > + pm_runtime_set_active(dev); > > + pm_runtime_use_autosuspend(dev); > > + pm_runtime_set_autosuspend_delay(dev, > > + CONFIG_USB_AUTOSUSPEND_DELAY * 1000); > > pm_runtime_enable(dev); > > - pm_runtime_get_sync(dev); > > The only one left pm_runtime_get() is removed by here, > now this driver only calls pm_runtime_put(). will add it back, and forbid runtime by default > > > - device_enable_async_suspend(dev); > > > > ret = xhci_mtk_ldos_enable(mtk); > > if (ret) > > @@ -499,6 +567,14 @@ static int xhci_mtk_probe(struct platform_device *pdev) > > ret = irq; > > goto disable_clk; > > } > > + dev_dbg(dev, "irq %i\n", irq); > > + > > + mtk->seal_irq = platform_get_irq_optional(pdev, 1); > > + if (mtk->seal_irq < 0) { > > + ret = mtk->seal_irq; > > + goto disable_clk; > > + } > > + dev_dbg(dev, "seal_irq %i\n", mtk->seal_irq); > > > > hcd = usb_create_hcd(driver, dev, dev_name(dev)); > > if (!hcd) { > > @@ -565,6 +641,27 @@ static int xhci_mtk_probe(struct platform_device *pdev) > > if (ret) > > goto dealloc_usb2_hcd; > > > > + INIT_DELAYED_WORK(&mtk->seal, xhci_mtk_seal_work); > > + snprintf(mtk->seal_descr, sizeof(mtk->seal_descr), "seal%s:usb%d", > > + hcd->driver->description, hcd->self.busnum); > > + ret = devm_request_irq(dev, mtk->seal_irq, &xhci_mtk_seal_irq, > > + IRQF_TRIGGER_FALLING, mtk->seal_descr, mtk); > > + if (ret != 0) { > > + dev_err(dev, "seal request interrupt %d failed\n", > > + mtk->seal_irq); > > + goto dealloc_usb2_hcd; > > + } > > + xhci_mtk_seal_wakeup_enable(mtk, false); > > + > > + device_enable_async_suspend(dev); > > + xhci_mtk_runtime_ready = 1; > > + > > + pm_runtime_mark_last_busy(dev); > > + pm_runtime_put_autosuspend(dev); > > I expect the usage count will be -1 by here in probe. will change it > > > + > > + dev_dbg(dev, "%s: xhci_mtk_runtime_ready %i", > > + __func__, xhci_mtk_runtime_ready); > > + > > return 0; > > > > dealloc_usb2_hcd: > > @@ -587,7 +684,7 @@ static int xhci_mtk_probe(struct platform_device *pdev) > > xhci_mtk_ldos_disable(mtk); > > > > disable_pm: > > - pm_runtime_put_sync(dev); > > + pm_runtime_put_sync_autosuspend(dev); > > pm_runtime_disable(dev); > > return ret; > > } > > @@ -602,6 +699,7 @@ static int xhci_mtk_remove(struct platform_device *dev) > > pm_runtime_put_noidle(&dev->dev); > > pm_runtime_disable(&dev->dev); > > > > + xhci_mtk_runtime_ready = 0; > > usb_remove_hcd(shared_hcd); > > xhci->shared_hcd = NULL; > > device_init_wakeup(&dev->dev, false); > > @@ -638,6 +736,7 @@ static int __maybe_unused xhci_mtk_suspend(struct device *dev) > > xhci_mtk_host_disable(mtk); > > xhci_mtk_clks_disable(mtk); > > usb_wakeup_set(mtk, true); > > + > > return 0; > > } > > > > @@ -659,10 +758,185 @@ static int __maybe_unused xhci_mtk_resume(struct device *dev) > > return 0; > > } > > > > +static int __maybe_unused xhci_mtk_bus_status(struct device *dev) > > +{ > > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > > + struct usb_hcd *hcd; > > + struct xhci_hcd *xhci; > > + struct xhci_hub *usb2_rhub; > > + struct xhci_hub *usb3_rhub; > > + struct xhci_bus_state *bus_state; > > + struct xhci_port *port; > > + u32 usb2_suspended_ports = -1; > > + u32 usb3_suspended_ports = -1; > > + u16 status; > > + int num_ports; > > + int ret = 0; > > + int i; > > + > > + if (!mtk->hcd) > > + return -ESHUTDOWN; > > + > > + hcd = mtk->hcd; > > + xhci = hcd_to_xhci(hcd); > > + if ((xhci->xhc_state & XHCI_STATE_REMOVING) || > > + (xhci->xhc_state & XHCI_STATE_HALTED)) { > > + return -ESHUTDOWN; > > + } > > This is duplicated from xhci_mtk_runtime_suspend() Yes, will remove it and rebuild the code > > > + > > + usb2_rhub = &xhci->usb2_rhub; > > + if (usb2_rhub) { > > + bus_state = &usb2_rhub->bus_state; > > + num_ports = usb2_rhub->num_ports; > > + usb2_suspended_ports = bus_state->suspended_ports; > > + usb2_suspended_ports ^= (BIT(num_ports) - 1); > > + usb2_suspended_ports &= (BIT(num_ports) - 1); > > + for (i = 0; i < num_ports; i++) { > > + if (usb2_suspended_ports & (1UL << i)) { > > + port = usb2_rhub->ports[i]; > > + status = readl(port->addr); > > + > > + xhci_dbg(xhci, > > + "USB20: portsc[%i]: 0x%04X\n", > > + i, status); > > + > > + if (!(status & PORT_CONNECT)) > > + usb2_suspended_ports &= ~(1UL << i); > > + } > > + } > > + > > + if (usb2_suspended_ports) { > > + ret = -EBUSY; > > + goto ebusy; > > + } > > + } > > + > > + usb3_rhub = &xhci->usb3_rhub; > > + if (usb3_rhub) { > > + bus_state = &usb3_rhub->bus_state; > > + num_ports = usb3_rhub->num_ports; > > + usb3_suspended_ports = bus_state->suspended_ports; > > + usb3_suspended_ports ^= (BIT(num_ports) - 1); > > + usb3_suspended_ports &= (BIT(num_ports) - 1); > > + for (i = 0; i < num_ports; i++) { > > + if (usb3_suspended_ports & BIT(i)) { > > + port = usb3_rhub->ports[i]; > > + status = readl(port->addr); > > + > > + xhci_dbg(xhci, "USB3: portsc[%i]: 0x%04X\n", > > + i, status); > > + > > + if (!(status & PORT_CONNECT)) > > + usb3_suspended_ports &= ~BIT(i); > > + } > > + } > > + > > + if (usb3_suspended_ports) { > > + ret = -EBUSY; > > + goto ebusy; > > + } > > + } > > + > > +ebusy: > > + xhci_dbg(xhci, "%s: USB2: 0x%08X, USB3: 0x%08X ret: %i\n", > > + __func__, usb2_suspended_ports, > > + usb3_suspended_ports, ret); > > + > > + return ret; > > +} > > + > > This is basically counting active ports by directly reading portsc register? Yes, > I expect this function never return -EBUSY if you balance pm usage > counter well. > Are there any specific reasons of doing this manually? pm_runtime_set_autosuspend_delay() is used, may check the ports status periodically. I will check it. If no spurious wakeup irq, apply the framework from wakeirq.c is the easiest way to support runtime-suspend. hope that find out the root cause and improve the HW design. In fact the EINT way is a deprecated feature and not used before. Thanks a lot. > > > +static int __maybe_unused xhci_mtk_runtime_suspend(struct device *dev) > > +{ > > + bool wakeup = device_may_wakeup(dev); > > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > > + struct usb_hcd *hcd; > > + struct xhci_hcd *xhci; > > + int ret = 0; > > + > > + if (!mtk->hcd) > > + return -ESHUTDOWN; > > + > > + hcd = mtk->hcd; > > + xhci = hcd_to_xhci(hcd); > > + if ((xhci->xhc_state & XHCI_STATE_REMOVING) || > > + (xhci->xhc_state & XHCI_STATE_HALTED)) { > > + return -ESHUTDOWN; > > + } > > + > > + mtk->seal_status = SEAL_BUSY; > > + ret = xhci_mtk_bus_status(dev); > > + if (wakeup && !ret) { > > + mtk->seal_status = SEAL_SUSPENDING; > > + xhci_mtk_suspend(dev); > > + xhci_mtk_seal_wakeup_enable(mtk, true); > > + mtk->seal_status = SEAL_SUSPENDED; > > + xhci_dbg(xhci, "%s: seals xHCI controller\n", __func__); > > + } > > + > > + xhci_dbg(xhci, "%s: seals wakeup = %i, ret = %i!\n", > > + __func__, wakeup, ret); > > + > > + return ret; > > +} > > + > > +static int __maybe_unused xhci_mtk_runtime_resume(struct device *dev) > > +{ > > + bool wakeup = device_may_wakeup(dev); > > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > > + struct usb_hcd *hcd; > > + struct xhci_hcd *xhci; > > + > > + if (!mtk->hcd) > > + return -ESHUTDOWN; > > + > > + hcd = mtk->hcd; > > + xhci = hcd_to_xhci(hcd); > > + if ((xhci->xhc_state & XHCI_STATE_REMOVING) || > > + (xhci->xhc_state & XHCI_STATE_HALTED)) { > > + return -ESHUTDOWN; > > + } > > + > > + /* > > + * list cases by one extra interrupt named seal to process!!! > > + * Who to process these module reinitilization after SPM wakeup > > + * case 1: usb remote wakeup, therefore xHCI need reinitilizate also. > > + * case 2: other-wakeup-source wakeup, therefore, xHCI need reinit > > + * case 3: usb client driver can invoke it in runtime mechanism > > + * case 4: user active > > + */ > > + if (wakeup) { > > + xhci_mtk_seal_wakeup_enable(mtk, false); > > + xhci_mtk_resume(dev); > > + xhci_dbg(xhci, "%s: unseals xHCI controller\n", __func__); > > + } > > + mtk->seal_status = SEAL_RESUMED; > > + > > + xhci_dbg(xhci, "%s: unseals wakeup = %i\n", __func__, wakeup); > > + > > + return 0; > > +} > > + > > +static int __maybe_unused xhci_mtk_runtime_idle(struct device *dev) > > +{ > > + int ret = 0; > > + > > + dev_dbg(dev, "%s: xhci_mtk_runtime_ready %i", > > + __func__, xhci_mtk_runtime_ready); > > + > > + if (!xhci_mtk_runtime_ready) > > + ret = -EAGAIN; > > + > > + return ret; > > +} > > + > > static const struct dev_pm_ops xhci_mtk_pm_ops = { > > SET_SYSTEM_SLEEP_PM_OPS(xhci_mtk_suspend, xhci_mtk_resume) > > + SET_RUNTIME_PM_OPS(xhci_mtk_runtime_suspend, > > + xhci_mtk_runtime_resume, > > + xhci_mtk_runtime_idle) > > }; > > -#define DEV_PM_OPS IS_ENABLED(CONFIG_PM) ? &xhci_mtk_pm_ops : NULL > > + > > +#define DEV_PM_OPS (IS_ENABLED(CONFIG_PM) ? &xhci_mtk_pm_ops : NULL) > > > > #ifdef CONFIG_OF > > static const struct of_device_id mtk_xhci_of_match[] = { > > @@ -686,6 +960,7 @@ MODULE_ALIAS("platform:xhci-mtk"); > > > > static int __init xhci_mtk_init(void) > > { > > + xhci_mtk_runtime_ready = 0; > > xhci_init_driver(&xhci_mtk_hc_driver, &xhci_mtk_overrides); > > return platform_driver_register(&mtk_xhci_driver); > > } > > diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h > > index 323b281933b9..103d83ce6a3e 100644 > > --- a/drivers/usb/host/xhci-mtk.h > > +++ b/drivers/usb/host/xhci-mtk.h > > @@ -133,6 +133,14 @@ struct mu3c_ippc_regs { > > __le32 reserved3[33]; /* 0x80 ~ 0xff */ > > }; > > > > +enum xhci_mtk_seal { > > + SEAL_BUSY = 0, > > + SEAL_SUSPENDING, > > + SEAL_SUSPENDED, > > + SEAL_RESUMING, > > + SEAL_RESUMED > > +}; > > + > > struct xhci_hcd_mtk { > > struct device *dev; > > struct usb_hcd *hcd; > > @@ -158,6 +166,12 @@ struct xhci_hcd_mtk { > > struct regmap *uwk; > > u32 uwk_reg_base; > > u32 uwk_vers; > > + > > + /* usb eint wakeup source */ > > + int seal_irq; > > + enum xhci_mtk_seal seal_status; > > + struct delayed_work seal; > > + char seal_descr[32]; /* "seal" + driver + bus # */ > > }; > > > > static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd) > > -- > > 2.18.0 > >
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c old mode 100755 new mode 100644 index 34bd3de090b1..c07d54acbcb7 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -14,6 +14,7 @@ #include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_irq.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/regmap.h> @@ -77,6 +78,72 @@ enum ssusb_uwk_vers { SSUSB_UWK_V3, }; +int xhci_mtk_runtime_ready; + +static int xhci_mtk_runtime_resume(struct device *dev); + +static void xhci_mtk_seal_work(struct work_struct *work) +{ + struct xhci_hcd_mtk *mtk = + container_of(work, struct xhci_hcd_mtk, seal.work); + struct usb_hcd *hcd = mtk->hcd; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + xhci_dbg(xhci, "spm unseals xHCI controller %i\n", mtk->seal_status); + if (mtk->seal_status == SEAL_SUSPENDED) { + mtk->seal_status = SEAL_RESUMING; + pm_runtime_mark_last_busy(mtk->dev); + pm_runtime_put_sync_autosuspend(mtk->dev); + } else { + /* + * FIXME: Sometimes seal_status will keep it on SEAL_RESUMING staus not to expect + * since pm_runtime_put_sync_autosuspend doesn't invoke runtime_resume of callback. + * and to survey why not to invoke runtime_resume callback named + * xhci_mtk_runtime_resume in time in short feature, Herely provide one solution + * that make sure seal_status to match h/w state machine,and MTK xHCI clocks + * on as soon as unseal event received. + */ + if (mtk->seal_status == SEAL_RESUMING) + xhci_mtk_runtime_resume(mtk->dev); + else + xhci_warn(xhci, + "Ignore seal wakeup source disordered in xHCI controller\n"); + } +} + +static irqreturn_t xhci_mtk_seal_irq(int irq, void *data) +{ + struct xhci_hcd_mtk *mtk = data; + struct usb_hcd *hcd = mtk->hcd; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + xhci_dbg(xhci, "seal irq ISR invoked\n"); + + schedule_delayed_work(&mtk->seal, 0); + + return IRQ_HANDLED; +} + +static void xhci_mtk_seal_wakeup_enable(struct xhci_hcd_mtk *mtk, bool enable) +{ + struct irq_desc *desc; + struct device *dev = mtk->dev; + + if (mtk && mtk->seal_irq) { + desc = irq_to_desc(mtk->seal_irq); + if (enable) { + desc->irq_data.chip->irq_ack(&desc->irq_data); + enable_irq(mtk->seal_irq); + dev_dbg(dev, "%s: enable_irq %i\n", + __func__, mtk->seal_irq); + } else { + disable_irq(mtk->seal_irq); + dev_dbg(dev, "%s: disable_irq %i\n", + __func__, mtk->seal_irq); + } + } +} + static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk) { struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs; @@ -347,7 +414,6 @@ static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk, mtk->uwk_reg_base, mtk->uwk_vers); return PTR_ERR_OR_ZERO(mtk->uwk); - } static void usb_wakeup_set(struct xhci_hcd_mtk *mtk, bool enable) @@ -482,9 +548,11 @@ static int xhci_mtk_probe(struct platform_device *pdev) return ret; } + pm_runtime_set_active(dev); + pm_runtime_use_autosuspend(dev); + pm_runtime_set_autosuspend_delay(dev, + CONFIG_USB_AUTOSUSPEND_DELAY * 1000); pm_runtime_enable(dev); - pm_runtime_get_sync(dev); - device_enable_async_suspend(dev); ret = xhci_mtk_ldos_enable(mtk); if (ret) @@ -499,6 +567,14 @@ static int xhci_mtk_probe(struct platform_device *pdev) ret = irq; goto disable_clk; } + dev_dbg(dev, "irq %i\n", irq); + + mtk->seal_irq = platform_get_irq_optional(pdev, 1); + if (mtk->seal_irq < 0) { + ret = mtk->seal_irq; + goto disable_clk; + } + dev_dbg(dev, "seal_irq %i\n", mtk->seal_irq); hcd = usb_create_hcd(driver, dev, dev_name(dev)); if (!hcd) { @@ -565,6 +641,27 @@ static int xhci_mtk_probe(struct platform_device *pdev) if (ret) goto dealloc_usb2_hcd; + INIT_DELAYED_WORK(&mtk->seal, xhci_mtk_seal_work); + snprintf(mtk->seal_descr, sizeof(mtk->seal_descr), "seal%s:usb%d", + hcd->driver->description, hcd->self.busnum); + ret = devm_request_irq(dev, mtk->seal_irq, &xhci_mtk_seal_irq, + IRQF_TRIGGER_FALLING, mtk->seal_descr, mtk); + if (ret != 0) { + dev_err(dev, "seal request interrupt %d failed\n", + mtk->seal_irq); + goto dealloc_usb2_hcd; + } + xhci_mtk_seal_wakeup_enable(mtk, false); + + device_enable_async_suspend(dev); + xhci_mtk_runtime_ready = 1; + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + dev_dbg(dev, "%s: xhci_mtk_runtime_ready %i", + __func__, xhci_mtk_runtime_ready); + return 0; dealloc_usb2_hcd: @@ -587,7 +684,7 @@ static int xhci_mtk_probe(struct platform_device *pdev) xhci_mtk_ldos_disable(mtk); disable_pm: - pm_runtime_put_sync(dev); + pm_runtime_put_sync_autosuspend(dev); pm_runtime_disable(dev); return ret; } @@ -602,6 +699,7 @@ static int xhci_mtk_remove(struct platform_device *dev) pm_runtime_put_noidle(&dev->dev); pm_runtime_disable(&dev->dev); + xhci_mtk_runtime_ready = 0; usb_remove_hcd(shared_hcd); xhci->shared_hcd = NULL; device_init_wakeup(&dev->dev, false); @@ -638,6 +736,7 @@ static int __maybe_unused xhci_mtk_suspend(struct device *dev) xhci_mtk_host_disable(mtk); xhci_mtk_clks_disable(mtk); usb_wakeup_set(mtk, true); + return 0; } @@ -659,10 +758,185 @@ static int __maybe_unused xhci_mtk_resume(struct device *dev) return 0; } +static int __maybe_unused xhci_mtk_bus_status(struct device *dev) +{ + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); + struct usb_hcd *hcd; + struct xhci_hcd *xhci; + struct xhci_hub *usb2_rhub; + struct xhci_hub *usb3_rhub; + struct xhci_bus_state *bus_state; + struct xhci_port *port; + u32 usb2_suspended_ports = -1; + u32 usb3_suspended_ports = -1; + u16 status; + int num_ports; + int ret = 0; + int i; + + if (!mtk->hcd) + return -ESHUTDOWN; + + hcd = mtk->hcd; + xhci = hcd_to_xhci(hcd); + if ((xhci->xhc_state & XHCI_STATE_REMOVING) || + (xhci->xhc_state & XHCI_STATE_HALTED)) { + return -ESHUTDOWN; + } + + usb2_rhub = &xhci->usb2_rhub; + if (usb2_rhub) { + bus_state = &usb2_rhub->bus_state; + num_ports = usb2_rhub->num_ports; + usb2_suspended_ports = bus_state->suspended_ports; + usb2_suspended_ports ^= (BIT(num_ports) - 1); + usb2_suspended_ports &= (BIT(num_ports) - 1); + for (i = 0; i < num_ports; i++) { + if (usb2_suspended_ports & (1UL << i)) { + port = usb2_rhub->ports[i]; + status = readl(port->addr); + + xhci_dbg(xhci, + "USB20: portsc[%i]: 0x%04X\n", + i, status); + + if (!(status & PORT_CONNECT)) + usb2_suspended_ports &= ~(1UL << i); + } + } + + if (usb2_suspended_ports) { + ret = -EBUSY; + goto ebusy; + } + } + + usb3_rhub = &xhci->usb3_rhub; + if (usb3_rhub) { + bus_state = &usb3_rhub->bus_state; + num_ports = usb3_rhub->num_ports; + usb3_suspended_ports = bus_state->suspended_ports; + usb3_suspended_ports ^= (BIT(num_ports) - 1); + usb3_suspended_ports &= (BIT(num_ports) - 1); + for (i = 0; i < num_ports; i++) { + if (usb3_suspended_ports & BIT(i)) { + port = usb3_rhub->ports[i]; + status = readl(port->addr); + + xhci_dbg(xhci, "USB3: portsc[%i]: 0x%04X\n", + i, status); + + if (!(status & PORT_CONNECT)) + usb3_suspended_ports &= ~BIT(i); + } + } + + if (usb3_suspended_ports) { + ret = -EBUSY; + goto ebusy; + } + } + +ebusy: + xhci_dbg(xhci, "%s: USB2: 0x%08X, USB3: 0x%08X ret: %i\n", + __func__, usb2_suspended_ports, + usb3_suspended_ports, ret); + + return ret; +} + +static int __maybe_unused xhci_mtk_runtime_suspend(struct device *dev) +{ + bool wakeup = device_may_wakeup(dev); + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); + struct usb_hcd *hcd; + struct xhci_hcd *xhci; + int ret = 0; + + if (!mtk->hcd) + return -ESHUTDOWN; + + hcd = mtk->hcd; + xhci = hcd_to_xhci(hcd); + if ((xhci->xhc_state & XHCI_STATE_REMOVING) || + (xhci->xhc_state & XHCI_STATE_HALTED)) { + return -ESHUTDOWN; + } + + mtk->seal_status = SEAL_BUSY; + ret = xhci_mtk_bus_status(dev); + if (wakeup && !ret) { + mtk->seal_status = SEAL_SUSPENDING; + xhci_mtk_suspend(dev); + xhci_mtk_seal_wakeup_enable(mtk, true); + mtk->seal_status = SEAL_SUSPENDED; + xhci_dbg(xhci, "%s: seals xHCI controller\n", __func__); + } + + xhci_dbg(xhci, "%s: seals wakeup = %i, ret = %i!\n", + __func__, wakeup, ret); + + return ret; +} + +static int __maybe_unused xhci_mtk_runtime_resume(struct device *dev) +{ + bool wakeup = device_may_wakeup(dev); + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); + struct usb_hcd *hcd; + struct xhci_hcd *xhci; + + if (!mtk->hcd) + return -ESHUTDOWN; + + hcd = mtk->hcd; + xhci = hcd_to_xhci(hcd); + if ((xhci->xhc_state & XHCI_STATE_REMOVING) || + (xhci->xhc_state & XHCI_STATE_HALTED)) { + return -ESHUTDOWN; + } + + /* + * list cases by one extra interrupt named seal to process!!! + * Who to process these module reinitilization after SPM wakeup + * case 1: usb remote wakeup, therefore xHCI need reinitilizate also. + * case 2: other-wakeup-source wakeup, therefore, xHCI need reinit + * case 3: usb client driver can invoke it in runtime mechanism + * case 4: user active + */ + if (wakeup) { + xhci_mtk_seal_wakeup_enable(mtk, false); + xhci_mtk_resume(dev); + xhci_dbg(xhci, "%s: unseals xHCI controller\n", __func__); + } + mtk->seal_status = SEAL_RESUMED; + + xhci_dbg(xhci, "%s: unseals wakeup = %i\n", __func__, wakeup); + + return 0; +} + +static int __maybe_unused xhci_mtk_runtime_idle(struct device *dev) +{ + int ret = 0; + + dev_dbg(dev, "%s: xhci_mtk_runtime_ready %i", + __func__, xhci_mtk_runtime_ready); + + if (!xhci_mtk_runtime_ready) + ret = -EAGAIN; + + return ret; +} + static const struct dev_pm_ops xhci_mtk_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(xhci_mtk_suspend, xhci_mtk_resume) + SET_RUNTIME_PM_OPS(xhci_mtk_runtime_suspend, + xhci_mtk_runtime_resume, + xhci_mtk_runtime_idle) }; -#define DEV_PM_OPS IS_ENABLED(CONFIG_PM) ? &xhci_mtk_pm_ops : NULL + +#define DEV_PM_OPS (IS_ENABLED(CONFIG_PM) ? &xhci_mtk_pm_ops : NULL) #ifdef CONFIG_OF static const struct of_device_id mtk_xhci_of_match[] = { @@ -686,6 +960,7 @@ MODULE_ALIAS("platform:xhci-mtk"); static int __init xhci_mtk_init(void) { + xhci_mtk_runtime_ready = 0; xhci_init_driver(&xhci_mtk_hc_driver, &xhci_mtk_overrides); return platform_driver_register(&mtk_xhci_driver); } diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h index 323b281933b9..103d83ce6a3e 100644 --- a/drivers/usb/host/xhci-mtk.h +++ b/drivers/usb/host/xhci-mtk.h @@ -133,6 +133,14 @@ struct mu3c_ippc_regs { __le32 reserved3[33]; /* 0x80 ~ 0xff */ }; +enum xhci_mtk_seal { + SEAL_BUSY = 0, + SEAL_SUSPENDING, + SEAL_SUSPENDED, + SEAL_RESUMING, + SEAL_RESUMED +}; + struct xhci_hcd_mtk { struct device *dev; struct usb_hcd *hcd; @@ -158,6 +166,12 @@ struct xhci_hcd_mtk { struct regmap *uwk; u32 uwk_reg_base; u32 uwk_vers; + + /* usb eint wakeup source */ + int seal_irq; + enum xhci_mtk_seal seal_status; + struct delayed_work seal; + char seal_descr[32]; /* "seal" + driver + bus # */ }; static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd)