diff mbox series

[3/6] iwlwifi: Allow per-device fwcfg files.

Message ID 20201231000523.14963-3-greearb@candelatech.com (mailing list archive)
State New
Delegated to: Miri Korenblit
Headers show
Series [1/6] iwlwifi: Decrease firmware monitor debug area from 4MB to 512k. | expand

Commit Message

Ben Greear Dec. 31, 2020, 12:05 a.m. UTC
From: Ben Greear <greearb@candelatech.com>

This allows one to set the NSS and some
other low-level features for ax200 radios.

Signed-off-by: Ben Greear <greearb@candelatech.com>
---
 drivers/net/wireless/intel/iwlwifi/iwl-dbg-cfg.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

Comments

Julian Calaby Dec. 31, 2020, 1:19 a.m. UTC | #1
Hi Ben,

On Thu, Dec 31, 2020 at 11:17 AM <greearb@candelatech.com> wrote:
>
> From: Ben Greear <greearb@candelatech.com>
>
> This allows one to set the NSS and some
> other low-level features for ax200 radios.
>
> Signed-off-by: Ben Greear <greearb@candelatech.com>
> ---
>  drivers/net/wireless/intel/iwlwifi/iwl-dbg-cfg.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-cfg.c b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-cfg.c
> index 223c716d9fce..e2ae509d1650 100644
> --- a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-cfg.c
> +++ b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-cfg.c
> @@ -246,12 +246,16 @@ void iwl_dbg_cfg_load_ini(struct device *dev, struct iwl_dbg_cfg *dbgcfg)
>         const struct firmware *fw;
>         char *data, *end, *pos;
>         int err;
> +       char fname[128];
>
>         if (dbgcfg->loaded)
>                 return;
>
> -       /* TODO: maybe add a per-device file? */
> -       err = firmware_request_nowarn(&fw, "iwl-dbg-cfg.ini", dev);
> +       snprintf(fname, 127, "iwl-dbg-cfg-%s.ini", dev_name(dev));
> +       fname[127] = 0;
> +
> +       /* TODO: maybe add a per-device file?  Yes, did that. --Ben */

You probably don't need the comment anymore =)

> +       err = firmware_request_nowarn(&fw, fname, dev);

Would it make sense to fall back to "iwl-dbg-cfg.ini" if the
per-device one isn't available?

Thanks,
Ben Greear Dec. 31, 2020, 2:47 a.m. UTC | #2
On 12/30/20 5:19 PM, Julian Calaby wrote:
> Hi Ben,
> 
> On Thu, Dec 31, 2020 at 11:17 AM <greearb@candelatech.com> wrote:
>>
>> From: Ben Greear <greearb@candelatech.com>
>>
>> This allows one to set the NSS and some
>> other low-level features for ax200 radios.
>>
>> Signed-off-by: Ben Greear <greearb@candelatech.com>
>> ---
>>   drivers/net/wireless/intel/iwlwifi/iwl-dbg-cfg.c | 8 ++++++--
>>   1 file changed, 6 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-cfg.c b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-cfg.c
>> index 223c716d9fce..e2ae509d1650 100644
>> --- a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-cfg.c
>> +++ b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-cfg.c
>> @@ -246,12 +246,16 @@ void iwl_dbg_cfg_load_ini(struct device *dev, struct iwl_dbg_cfg *dbgcfg)
>>          const struct firmware *fw;
>>          char *data, *end, *pos;
>>          int err;
>> +       char fname[128];
>>
>>          if (dbgcfg->loaded)
>>                  return;
>>
>> -       /* TODO: maybe add a per-device file? */
>> -       err = firmware_request_nowarn(&fw, "iwl-dbg-cfg.ini", dev);
>> +       snprintf(fname, 127, "iwl-dbg-cfg-%s.ini", dev_name(dev));
>> +       fname[127] = 0;
>> +
>> +       /* TODO: maybe add a per-device file?  Yes, did that. --Ben */
> 
> You probably don't need the comment anymore =)
> 
>> +       err = firmware_request_nowarn(&fw, fname, dev);
> 
> Would it make sense to fall back to "iwl-dbg-cfg.ini" if the
> per-device one isn't available?

It would be fine with me, lets see if Luca has any interest in the patches
in general before I go tweaking on them...

Thanks,
Ben

> 
> Thanks,
>
diff mbox series

Patch

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-cfg.c b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-cfg.c
index 223c716d9fce..e2ae509d1650 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-dbg-cfg.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-dbg-cfg.c
@@ -246,12 +246,16 @@  void iwl_dbg_cfg_load_ini(struct device *dev, struct iwl_dbg_cfg *dbgcfg)
 	const struct firmware *fw;
 	char *data, *end, *pos;
 	int err;
+	char fname[128];
 
 	if (dbgcfg->loaded)
 		return;
 
-	/* TODO: maybe add a per-device file? */
-	err = firmware_request_nowarn(&fw, "iwl-dbg-cfg.ini", dev);
+	snprintf(fname, 127, "iwl-dbg-cfg-%s.ini", dev_name(dev));
+	fname[127] = 0;
+
+	/* TODO: maybe add a per-device file?  Yes, did that. --Ben */
+	err = firmware_request_nowarn(&fw, fname, dev);
 	if (err)
 		return;