| Message ID | 20210103035639.24076-1-tiny.windzz@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | None | expand |
On Sun, Jan 3, 2021 at 12:59 PM Yangtao Li <tiny.windzz@gmail.com> wrote: > > Use devm_pm_opp_* API to simplify code, and remove opp_table > from exynos_bus. > > Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> > --- > drivers/devfreq/exynos-bus.c | 42 ++++++++---------------------------- > 1 file changed, 9 insertions(+), 33 deletions(-) > > diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c > index e689101abc93..51752e5ce980 100644 > --- a/drivers/devfreq/exynos-bus.c > +++ b/drivers/devfreq/exynos-bus.c > @@ -33,7 +33,6 @@ struct exynos_bus { > > unsigned long curr_freq; > > - struct opp_table *opp_table; > struct clk *clk; > unsigned int ratio; > }; > @@ -159,10 +158,7 @@ static void exynos_bus_exit(struct device *dev) > > platform_device_unregister(bus->icc_pdev); > > - dev_pm_opp_of_remove_table(dev); > clk_disable_unprepare(bus->clk); > - dev_pm_opp_put_regulators(bus->opp_table); OPP uses the clock and regulator. It means that there are dependency between them and the sequence for resource free. I think that OPP should be removed before clock and regulator. Your patch always guarantee this dependency? If not, we have to free the resource according to the dependency. > - bus->opp_table = NULL; > } > > static void exynos_bus_passive_exit(struct device *dev) > @@ -171,7 +167,6 @@ static void exynos_bus_passive_exit(struct device *dev) > > platform_device_unregister(bus->icc_pdev); > > - dev_pm_opp_of_remove_table(dev); > clk_disable_unprepare(bus->clk); > } > > @@ -183,15 +178,13 @@ static int exynos_bus_parent_parse_of(struct device_node *np, > const char *vdd = "vdd"; > int i, ret, count, size; > > - opp_table = dev_pm_opp_set_regulators(dev, &vdd, 1); > + opp_table = devm_pm_opp_set_regulators(dev, &vdd, 1); > if (IS_ERR(opp_table)) { > ret = PTR_ERR(opp_table); > dev_err(dev, "failed to set regulators %d\n", ret); > return ret; > } > > - bus->opp_table = opp_table; > - > /* > * Get the devfreq-event devices to get the current utilization of > * buses. This raw data will be used in devfreq ondemand governor. > @@ -199,25 +192,20 @@ static int exynos_bus_parent_parse_of(struct device_node *np, > count = devfreq_event_get_edev_count(dev, "devfreq-events"); > if (count < 0) { > dev_err(dev, "failed to get the count of devfreq-event dev\n"); > - ret = count; > - goto err_regulator; > + return count; > } > bus->edev_count = count; > > size = sizeof(*bus->edev) * count; > bus->edev = devm_kzalloc(dev, size, GFP_KERNEL); > - if (!bus->edev) { > - ret = -ENOMEM; > - goto err_regulator; > - } > + if (!bus->edev) > + return -ENOMEM; > > for (i = 0; i < count; i++) { > bus->edev[i] = devfreq_event_get_edev_by_phandle(dev, > "devfreq-events", i); > - if (IS_ERR(bus->edev[i])) { > - ret = -EPROBE_DEFER; > - goto err_regulator; > - } > + if (IS_ERR(bus->edev[i])) > + return -EPROBE_DEFER; > } > > /* > @@ -234,12 +222,6 @@ static int exynos_bus_parent_parse_of(struct device_node *np, > bus->ratio = DEFAULT_SATURATION_RATIO; > > return 0; > - > -err_regulator: > - dev_pm_opp_put_regulators(bus->opp_table); > - bus->opp_table = NULL; > - > - return ret; > } > > static int exynos_bus_parse_of(struct device_node *np, > @@ -264,7 +246,7 @@ static int exynos_bus_parse_of(struct device_node *np, > } > > /* Get the freq and voltage from OPP table to scale the bus freq */ > - ret = dev_pm_opp_of_add_table(dev); > + ret = devm_pm_opp_of_add_table(dev); > if (ret < 0) { > dev_err(dev, "failed to get OPP table\n"); > goto err_clk; > @@ -276,15 +258,13 @@ static int exynos_bus_parse_of(struct device_node *np, > if (IS_ERR(opp)) { > dev_err(dev, "failed to find dev_pm_opp\n"); > ret = PTR_ERR(opp); > - goto err_opp; > + goto err_clk; > } > bus->curr_freq = dev_pm_opp_get_freq(opp); > dev_pm_opp_put(opp); > > return 0; > > -err_opp: > - dev_pm_opp_of_remove_table(dev); > err_clk: > clk_disable_unprepare(bus->clk); > > @@ -425,7 +405,7 @@ static int exynos_bus_probe(struct platform_device *pdev) > /* Parse the device-tree to get the resource information */ > ret = exynos_bus_parse_of(np, bus); > if (ret < 0) > - goto err_reg; > + return ret; > > if (passive) > ret = exynos_bus_profile_init_passive(bus, profile); > @@ -456,11 +436,7 @@ static int exynos_bus_probe(struct platform_device *pdev) > return 0; > > err: > - dev_pm_opp_of_remove_table(dev); > clk_disable_unprepare(bus->clk); > -err_reg: > - dev_pm_opp_put_regulators(bus->opp_table); > - bus->opp_table = NULL; > > return ret; > } > -- > 2.25.1 >
diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c index e689101abc93..51752e5ce980 100644 --- a/drivers/devfreq/exynos-bus.c +++ b/drivers/devfreq/exynos-bus.c @@ -33,7 +33,6 @@ struct exynos_bus { unsigned long curr_freq; - struct opp_table *opp_table; struct clk *clk; unsigned int ratio; }; @@ -159,10 +158,7 @@ static void exynos_bus_exit(struct device *dev) platform_device_unregister(bus->icc_pdev); - dev_pm_opp_of_remove_table(dev); clk_disable_unprepare(bus->clk); - dev_pm_opp_put_regulators(bus->opp_table); - bus->opp_table = NULL; } static void exynos_bus_passive_exit(struct device *dev) @@ -171,7 +167,6 @@ static void exynos_bus_passive_exit(struct device *dev) platform_device_unregister(bus->icc_pdev); - dev_pm_opp_of_remove_table(dev); clk_disable_unprepare(bus->clk); } @@ -183,15 +178,13 @@ static int exynos_bus_parent_parse_of(struct device_node *np, const char *vdd = "vdd"; int i, ret, count, size; - opp_table = dev_pm_opp_set_regulators(dev, &vdd, 1); + opp_table = devm_pm_opp_set_regulators(dev, &vdd, 1); if (IS_ERR(opp_table)) { ret = PTR_ERR(opp_table); dev_err(dev, "failed to set regulators %d\n", ret); return ret; } - bus->opp_table = opp_table; - /* * Get the devfreq-event devices to get the current utilization of * buses. This raw data will be used in devfreq ondemand governor. @@ -199,25 +192,20 @@ static int exynos_bus_parent_parse_of(struct device_node *np, count = devfreq_event_get_edev_count(dev, "devfreq-events"); if (count < 0) { dev_err(dev, "failed to get the count of devfreq-event dev\n"); - ret = count; - goto err_regulator; + return count; } bus->edev_count = count; size = sizeof(*bus->edev) * count; bus->edev = devm_kzalloc(dev, size, GFP_KERNEL); - if (!bus->edev) { - ret = -ENOMEM; - goto err_regulator; - } + if (!bus->edev) + return -ENOMEM; for (i = 0; i < count; i++) { bus->edev[i] = devfreq_event_get_edev_by_phandle(dev, "devfreq-events", i); - if (IS_ERR(bus->edev[i])) { - ret = -EPROBE_DEFER; - goto err_regulator; - } + if (IS_ERR(bus->edev[i])) + return -EPROBE_DEFER; } /* @@ -234,12 +222,6 @@ static int exynos_bus_parent_parse_of(struct device_node *np, bus->ratio = DEFAULT_SATURATION_RATIO; return 0; - -err_regulator: - dev_pm_opp_put_regulators(bus->opp_table); - bus->opp_table = NULL; - - return ret; } static int exynos_bus_parse_of(struct device_node *np, @@ -264,7 +246,7 @@ static int exynos_bus_parse_of(struct device_node *np, } /* Get the freq and voltage from OPP table to scale the bus freq */ - ret = dev_pm_opp_of_add_table(dev); + ret = devm_pm_opp_of_add_table(dev); if (ret < 0) { dev_err(dev, "failed to get OPP table\n"); goto err_clk; @@ -276,15 +258,13 @@ static int exynos_bus_parse_of(struct device_node *np, if (IS_ERR(opp)) { dev_err(dev, "failed to find dev_pm_opp\n"); ret = PTR_ERR(opp); - goto err_opp; + goto err_clk; } bus->curr_freq = dev_pm_opp_get_freq(opp); dev_pm_opp_put(opp); return 0; -err_opp: - dev_pm_opp_of_remove_table(dev); err_clk: clk_disable_unprepare(bus->clk); @@ -425,7 +405,7 @@ static int exynos_bus_probe(struct platform_device *pdev) /* Parse the device-tree to get the resource information */ ret = exynos_bus_parse_of(np, bus); if (ret < 0) - goto err_reg; + return ret; if (passive) ret = exynos_bus_profile_init_passive(bus, profile); @@ -456,11 +436,7 @@ static int exynos_bus_probe(struct platform_device *pdev) return 0; err: - dev_pm_opp_of_remove_table(dev); clk_disable_unprepare(bus->clk); -err_reg: - dev_pm_opp_put_regulators(bus->opp_table); - bus->opp_table = NULL; return ret; }
Use devm_pm_opp_* API to simplify code, and remove opp_table from exynos_bus. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> --- drivers/devfreq/exynos-bus.c | 42 ++++++++---------------------------- 1 file changed, 9 insertions(+), 33 deletions(-)