| Message ID | 20201225012025.507803-3-pgwipeout@gmail.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | fix tegra-hda on tegra30 devices | expand |
On 12/25/2020 6:50 AM, Peter Geis wrote: > External email: Use caution opening links or attachments > > > Currently hda on tegra30 fails to open a stream with an input/output error. > This is similar to the issue referenced in [1]. > > For example: > speaker-test -Dhw:0,3 -c 2 > > speaker-test 1.2.2 > > Playback device is hw:0,3 > Stream parameters are 48000Hz, S16_LE, 2 channels > Using 16 octaves of pink noise > Rate set to 48000Hz (requested 48000Hz) > Buffer size range from 64 to 16384 > Period size range from 32 to 8192 > Using max buffer size 16384 > Periods = 4 > was set period_size = 4096 > was set buffer_size = 16384 > 0 - Front Left > Write error: -5,Input/output error > xrun_recovery failed: -5,Input/output error > Transfer failed: Input/output error > > [1] states "Due to a legacy HW design problem", implying the issue applies to all previous tegra-hda devices. > The tegra-hda device was introduced in tegra30 but only utilized in tegra124 until now. > For this reason it is unknown when this issue first manifested. > > Applying the fix in [1] universally resolves this issue on tegra30. > Tested on the Ouya game console and the tf201 tablet. > > [1] 60019d8c650d ("ALSA: hda/tegra: workaround playback failure on Tegra194") This issue was never seen on Tegra210/Tegra186 and hence at that time it was thought to be specific to Tegra194. I never tested this on Tegra30 since I don't have this device. I will clarify this with HW folks if workaround is safer for all chips. > > Signed-off-by: Peter Geis <pgwipeout@gmail.com> > Tested-by: Ion Agorria <ion@agorria.com> > --- > sound/pci/hda/hda_tegra.c | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c > index 70164d1428d4..f8d61e677a09 100644 > --- a/sound/pci/hda/hda_tegra.c > +++ b/sound/pci/hda/hda_tegra.c > @@ -388,8 +388,7 @@ static int hda_tegra_first_init(struct azx *chip, struct platform_device *pdev) > * in powers of 2, next available ratio is 16 which can be > * used as a limiting factor here. > */ > - if (of_device_is_compatible(np, "nvidia,tegra194-hda")) > - chip->bus.core.sdo_limit = 16; > + chip->bus.core.sdo_limit = 16; Future Tegra chips address this problem and hence cannot be enforced by default. May be we can have like below: if (of_device_is_compatible(np, "nvidia,tegra30-hda")) chip->bus.core.sdo_limit = 16; > > /* codec detection */ > if (!bus->codec_mask) { > -- > 2.25.1 >
On Tue, Jan 5, 2021 at 1:30 AM Sameer Pujar <spujar@nvidia.com> wrote: > > > > On 12/25/2020 6:50 AM, Peter Geis wrote: > > External email: Use caution opening links or attachments > > > > > > Currently hda on tegra30 fails to open a stream with an input/output error. > > This is similar to the issue referenced in [1]. > > > > For example: > > speaker-test -Dhw:0,3 -c 2 > > > > speaker-test 1.2.2 > > > > Playback device is hw:0,3 > > Stream parameters are 48000Hz, S16_LE, 2 channels > > Using 16 octaves of pink noise > > Rate set to 48000Hz (requested 48000Hz) > > Buffer size range from 64 to 16384 > > Period size range from 32 to 8192 > > Using max buffer size 16384 > > Periods = 4 > > was set period_size = 4096 > > was set buffer_size = 16384 > > 0 - Front Left > > Write error: -5,Input/output error > > xrun_recovery failed: -5,Input/output error > > Transfer failed: Input/output error > > > > [1] states "Due to a legacy HW design problem", implying the issue applies to all previous tegra-hda devices. > > The tegra-hda device was introduced in tegra30 but only utilized in tegra124 until now. > > For this reason it is unknown when this issue first manifested. > > > > Applying the fix in [1] universally resolves this issue on tegra30. > > Tested on the Ouya game console and the tf201 tablet. > > > > [1] 60019d8c650d ("ALSA: hda/tegra: workaround playback failure on Tegra194") > > This issue was never seen on Tegra210/Tegra186 and hence at that time it > was thought to be specific to Tegra194. I never tested this on Tegra30 > since I don't have this device. I will clarify this with HW folks if > workaround is safer for all chips. So this is confirmed to not affect Tegra210 and Tegra186, but it does affect Tegra194 and Tegra30. Is it possible for the hardware team to pitch on on where the fix was implemented? > > > > > Signed-off-by: Peter Geis <pgwipeout@gmail.com> > > Tested-by: Ion Agorria <ion@agorria.com> > > --- > > sound/pci/hda/hda_tegra.c | 3 +-- > > 1 file changed, 1 insertion(+), 2 deletions(-) > > > > diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c > > index 70164d1428d4..f8d61e677a09 100644 > > --- a/sound/pci/hda/hda_tegra.c > > +++ b/sound/pci/hda/hda_tegra.c > > @@ -388,8 +388,7 @@ static int hda_tegra_first_init(struct azx *chip, struct platform_device *pdev) > > * in powers of 2, next available ratio is 16 which can be > > * used as a limiting factor here. > > */ > > - if (of_device_is_compatible(np, "nvidia,tegra194-hda")) > > - chip->bus.core.sdo_limit = 16; > > + chip->bus.core.sdo_limit = 16; > > Future Tegra chips address this problem and hence cannot be enforced by > default. May be we can have like below: > > if (of_device_is_compatible(np, "nvidia,tegra30-hda")) > chip->bus.core.sdo_limit = 16; > It will need to be a bit more complicated than that, since the tegra186 and tegra210 device trees have "nvidia,tegra30-hda" as a fallback. Looking at the generation map, tegra30-hda can be the fallback for the broken implementation and tegra210-hda can be the fallback for the working implementation. Does that work for you? > > > > /* codec detection */ > > if (!bus->codec_mask) { > > -- > > 2.25.1 > > >
On 1/7/2021 2:51 AM, Peter Geis wrote: > External email: Use caution opening links or attachments > > > On Tue, Jan 5, 2021 at 1:30 AM Sameer Pujar <spujar@nvidia.com> wrote: >> >> >> On 12/25/2020 6:50 AM, Peter Geis wrote: >>> External email: Use caution opening links or attachments >>> >>> >>> Currently hda on tegra30 fails to open a stream with an input/output error. >>> This is similar to the issue referenced in [1]. >>> >>> For example: >>> speaker-test -Dhw:0,3 -c 2 >>> >>> speaker-test 1.2.2 >>> >>> Playback device is hw:0,3 >>> Stream parameters are 48000Hz, S16_LE, 2 channels >>> Using 16 octaves of pink noise >>> Rate set to 48000Hz (requested 48000Hz) >>> Buffer size range from 64 to 16384 >>> Period size range from 32 to 8192 >>> Using max buffer size 16384 >>> Periods = 4 >>> was set period_size = 4096 >>> was set buffer_size = 16384 >>> 0 - Front Left >>> Write error: -5,Input/output error >>> xrun_recovery failed: -5,Input/output error >>> Transfer failed: Input/output error >>> >>> [1] states "Due to a legacy HW design problem", implying the issue applies to all previous tegra-hda devices. >>> The tegra-hda device was introduced in tegra30 but only utilized in tegra124 until now. >>> For this reason it is unknown when this issue first manifested. >>> >>> Applying the fix in [1] universally resolves this issue on tegra30. >>> Tested on the Ouya game console and the tf201 tablet. >>> >>> [1] 60019d8c650d ("ALSA: hda/tegra: workaround playback failure on Tegra194") >> This issue was never seen on Tegra210/Tegra186 and hence at that time it >> was thought to be specific to Tegra194. I never tested this on Tegra30 >> since I don't have this device. I will clarify this with HW folks if >> workaround is safer for all chips. > So this is confirmed to not affect Tegra210 and Tegra186, but it does > affect Tegra194 and Tegra30. > Is it possible for the hardware team to pitch on on where the fix was > implemented? I discussed this with HW team. The issue is applicable to all Tegra chips. Below is the striping formula referenced from HD audio spec. { ((num_channels * bits_per_sample) / number of SDOs) >= 8 } The current issue is seen because Tegra HW has a problem with boundary condition (= 8) for striping. The reason why it is not seen on Tegra210/Tegra186 is because it uses max 2SDO lines. Max SDO lines is read from GCAP register. For the given stream (channels = 2, bps = 16); ratio = (channels * bps) / NSDO = 32 / NSDO; On Tegra30, ratio = 32/4 = 8 (FAIL) On Tegra210/186, ratio = 32/2 = 16 (PASS) On Tegra194, ratio = 32/4 = 8 (FAIL) ==> Earlier workaround was applied for it If Tegra210/186 is forced to use 4SDO, it fails there as well. So the behavior is consistent across all these chips. >>> Signed-off-by: Peter Geis <pgwipeout@gmail.com> >>> Tested-by: Ion Agorria <ion@agorria.com> >>> --- >>> sound/pci/hda/hda_tegra.c | 3 +-- >>> 1 file changed, 1 insertion(+), 2 deletions(-) >>> >>> diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c >>> index 70164d1428d4..f8d61e677a09 100644 >>> --- a/sound/pci/hda/hda_tegra.c >>> +++ b/sound/pci/hda/hda_tegra.c >>> @@ -388,8 +388,7 @@ static int hda_tegra_first_init(struct azx *chip, struct platform_device *pdev) >>> * in powers of 2, next available ratio is 16 which can be >>> * used as a limiting factor here. >>> */ >>> - if (of_device_is_compatible(np, "nvidia,tegra194-hda")) >>> - chip->bus.core.sdo_limit = 16; >>> + chip->bus.core.sdo_limit = 16; >> Future Tegra chips address this problem and hence cannot be enforced by >> default. May be we can have like below: >> >> if (of_device_is_compatible(np, "nvidia,tegra30-hda")) >> chip->bus.core.sdo_limit = 16; >> > It will need to be a bit more complicated than that, since the > tegra186 and tegra210 device trees have "nvidia,tegra30-hda" as a > fallback. > Looking at the generation map, tegra30-hda can be the fallback for the > broken implementation and tegra210-hda can be the fallback for the > working implementation. > Does that work for you? As per above explanation, it is fine to apply the workaround for Tegra210/186 as well. So it simplifies things for all existing chips. >>> /* codec detection */ >>> if (!bus->codec_mask) { >>> -- >>> 2.25.1 >>>
On 08/01/2021 08:00, Sameer Pujar wrote: ... >>>> Signed-off-by: Peter Geis <pgwipeout@gmail.com> >>>> Tested-by: Ion Agorria <ion@agorria.com> >>>> --- >>>> sound/pci/hda/hda_tegra.c | 3 +-- >>>> 1 file changed, 1 insertion(+), 2 deletions(-) >>>> >>>> diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c >>>> index 70164d1428d4..f8d61e677a09 100644 >>>> --- a/sound/pci/hda/hda_tegra.c >>>> +++ b/sound/pci/hda/hda_tegra.c >>>> @@ -388,8 +388,7 @@ static int hda_tegra_first_init(struct azx >>>> *chip, struct platform_device *pdev) >>>> * in powers of 2, next available ratio is 16 which can be >>>> * used as a limiting factor here. >>>> */ >>>> - if (of_device_is_compatible(np, "nvidia,tegra194-hda")) >>>> - chip->bus.core.sdo_limit = 16; >>>> + chip->bus.core.sdo_limit = 16; >>> Future Tegra chips address this problem and hence cannot be enforced by >>> default. May be we can have like below: >>> >>> if (of_device_is_compatible(np, "nvidia,tegra30-hda")) >>> chip->bus.core.sdo_limit = 16; >>> >> It will need to be a bit more complicated than that, since the >> tegra186 and tegra210 device trees have "nvidia,tegra30-hda" as a >> fallback. >> Looking at the generation map, tegra30-hda can be the fallback for the >> broken implementation and tegra210-hda can be the fallback for the >> working implementation. >> Does that work for you? > > As per above explanation, it is fine to apply the workaround for > Tegra210/186 as well. So it simplifies things for all existing chips. FYI ... we now have minimal support for Tegra234 in upstream that should not require this. Given that the Tegra234 device-tree does not include support for HDA yet, I think it is fine to apply this as-is. However, once we do add support for Tegra234 HDA, then we should ensure that this is not applied. So that said ... Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Cheers Jon
On 08/01/2021 10:54, Jon Hunter wrote: > > On 08/01/2021 08:00, Sameer Pujar wrote: > > ... > >>>>> Signed-off-by: Peter Geis <pgwipeout@gmail.com> >>>>> Tested-by: Ion Agorria <ion@agorria.com> >>>>> --- >>>>> sound/pci/hda/hda_tegra.c | 3 +-- >>>>> 1 file changed, 1 insertion(+), 2 deletions(-) >>>>> >>>>> diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c >>>>> index 70164d1428d4..f8d61e677a09 100644 >>>>> --- a/sound/pci/hda/hda_tegra.c >>>>> +++ b/sound/pci/hda/hda_tegra.c >>>>> @@ -388,8 +388,7 @@ static int hda_tegra_first_init(struct azx >>>>> *chip, struct platform_device *pdev) >>>>> * in powers of 2, next available ratio is 16 which can be >>>>> * used as a limiting factor here. >>>>> */ >>>>> - if (of_device_is_compatible(np, "nvidia,tegra194-hda")) >>>>> - chip->bus.core.sdo_limit = 16; >>>>> + chip->bus.core.sdo_limit = 16; >>>> Future Tegra chips address this problem and hence cannot be enforced by >>>> default. May be we can have like below: >>>> >>>> if (of_device_is_compatible(np, "nvidia,tegra30-hda")) >>>> chip->bus.core.sdo_limit = 16; >>>> >>> It will need to be a bit more complicated than that, since the >>> tegra186 and tegra210 device trees have "nvidia,tegra30-hda" as a >>> fallback. >>> Looking at the generation map, tegra30-hda can be the fallback for the >>> broken implementation and tegra210-hda can be the fallback for the >>> working implementation. >>> Does that work for you? >> >> As per above explanation, it is fine to apply the workaround for >> Tegra210/186 as well. So it simplifies things for all existing chips. > > > FYI ... we now have minimal support for Tegra234 in upstream that should > not require this. Given that the Tegra234 device-tree does not include > support for HDA yet, I think it is fine to apply this as-is. However, > once we do add support for Tegra234 HDA, then we should ensure that this > is not applied. So that said ... > > Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Sorry I was chatting with Sameer offline and we think if we just switch the test to the following then this will take care of Tegra234 when we add it ... if (of_device_is_compatible(np, "nvidia,tegra30-hda")) Peter, would you be able to send a V2 with this? Thanks! Jon
On Fri, Jan 8, 2021 at 6:33 AM Jon Hunter <jonathanh@nvidia.com> wrote: > > > On 08/01/2021 10:54, Jon Hunter wrote: > > > > On 08/01/2021 08:00, Sameer Pujar wrote: > > > > ... > > > >>>>> Signed-off-by: Peter Geis <pgwipeout@gmail.com> > >>>>> Tested-by: Ion Agorria <ion@agorria.com> > >>>>> --- > >>>>> sound/pci/hda/hda_tegra.c | 3 +-- > >>>>> 1 file changed, 1 insertion(+), 2 deletions(-) > >>>>> > >>>>> diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c > >>>>> index 70164d1428d4..f8d61e677a09 100644 > >>>>> --- a/sound/pci/hda/hda_tegra.c > >>>>> +++ b/sound/pci/hda/hda_tegra.c > >>>>> @@ -388,8 +388,7 @@ static int hda_tegra_first_init(struct azx > >>>>> *chip, struct platform_device *pdev) > >>>>> * in powers of 2, next available ratio is 16 which can be > >>>>> * used as a limiting factor here. > >>>>> */ > >>>>> - if (of_device_is_compatible(np, "nvidia,tegra194-hda")) > >>>>> - chip->bus.core.sdo_limit = 16; > >>>>> + chip->bus.core.sdo_limit = 16; > >>>> Future Tegra chips address this problem and hence cannot be enforced by > >>>> default. May be we can have like below: > >>>> > >>>> if (of_device_is_compatible(np, "nvidia,tegra30-hda")) > >>>> chip->bus.core.sdo_limit = 16; > >>>> > >>> It will need to be a bit more complicated than that, since the > >>> tegra186 and tegra210 device trees have "nvidia,tegra30-hda" as a > >>> fallback. > >>> Looking at the generation map, tegra30-hda can be the fallback for the > >>> broken implementation and tegra210-hda can be the fallback for the > >>> working implementation. > >>> Does that work for you? > >> > >> As per above explanation, it is fine to apply the workaround for > >> Tegra210/186 as well. So it simplifies things for all existing chips. > > > > > > FYI ... we now have minimal support for Tegra234 in upstream that should > > not require this. Given that the Tegra234 device-tree does not include > > support for HDA yet, I think it is fine to apply this as-is. However, > > once we do add support for Tegra234 HDA, then we should ensure that this > > is not applied. So that said ... > > > > Reviewed-by: Jon Hunter <jonathanh@nvidia.com> > > > Sorry I was chatting with Sameer offline and we think if we just switch > the test to the following then this will take care of Tegra234 when we > add it ... > > if (of_device_is_compatible(np, "nvidia,tegra30-hda")) > > Peter, would you be able to send a V2 with this? > > Thanks! > Jon > > -- > nvpublic Certainly, thank you all!
diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c index 70164d1428d4..f8d61e677a09 100644 --- a/sound/pci/hda/hda_tegra.c +++ b/sound/pci/hda/hda_tegra.c @@ -388,8 +388,7 @@ static int hda_tegra_first_init(struct azx *chip, struct platform_device *pdev) * in powers of 2, next available ratio is 16 which can be * used as a limiting factor here. */ - if (of_device_is_compatible(np, "nvidia,tegra194-hda")) - chip->bus.core.sdo_limit = 16; + chip->bus.core.sdo_limit = 16; /* codec detection */ if (!bus->codec_mask) {
Currently hda on tegra30 fails to open a stream with an input/output error. This is similar to the issue referenced in [1]. For example: speaker-test -Dhw:0,3 -c 2 speaker-test 1.2.2 Playback device is hw:0,3 Stream parameters are 48000Hz, S16_LE, 2 channels Using 16 octaves of pink noise Rate set to 48000Hz (requested 48000Hz) Buffer size range from 64 to 16384 Period size range from 32 to 8192 Using max buffer size 16384 Periods = 4 was set period_size = 4096 was set buffer_size = 16384 0 - Front Left Write error: -5,Input/output error xrun_recovery failed: -5,Input/output error Transfer failed: Input/output error [1] states "Due to a legacy HW design problem", implying the issue applies to all previous tegra-hda devices. The tegra-hda device was introduced in tegra30 but only utilized in tegra124 until now. For this reason it is unknown when this issue first manifested. Applying the fix in [1] universally resolves this issue on tegra30. Tested on the Ouya game console and the tf201 tablet. [1] 60019d8c650d ("ALSA: hda/tegra: workaround playback failure on Tegra194") Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Ion Agorria <ion@agorria.com> --- sound/pci/hda/hda_tegra.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)