diff mbox series

[v8,2/3] ARM: dts: Add support for i.MX6 UltraLite DART Variscite Customboard

Message ID 1610144511-19018-3-git-send-email-oliver.graute@gmail.com (mailing list archive)
State Not Applicable
Headers show
Series None | expand

Commit Message

Oliver Graute Jan. 8, 2021, 10:21 p.m. UTC 
This patch adds DeviceTree Source for the i.MX6 UltraLite DART NAND/WIFI

Signed-off-by: Oliver Graute <oliver.graute@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Cc: Parthiban Nallathambi <parthitce@gmail.com>
---
Changelog:

v8:
 - backlight droped the status line
 - port the display panel
 - added pinctrl for touch

v7:
 - fixed wakeup-source

v6:
 - added some muxing
 - added codec in sound node
 - added adc1 node

 arch/arm/boot/dts/Makefile                      |   1 +
 arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts | 270 ++++++++++++++++++++++++
 2 files changed, 271 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts

Comments

Fabio Estevam Jan. 9, 2021, 7:53 p.m. UTC | #1 
On Fri, Jan 8, 2021 at 7:23 PM Oliver Graute <oliver.graute@gmail.com> wrote:

> +       panel1: panel-lcd {
> +               compatible = "sgd,gktw70sdad1sd";
> +
> +               backlight = <&backlight_lcd>;
> +               power-supply = <&reg_touch_3v3>;
> +               label = "gktw70sdad1sd";
> +
> +               display-timing {

If you pass the compatible, then you don't need to add the
display-timing in the device tree.
Oliver Graute Jan. 10, 2021, 4:12 p.m. UTC | #2 
On 09/01/21, Fabio Estevam wrote:
> On Fri, Jan 8, 2021 at 7:23 PM Oliver Graute <oliver.graute@gmail.com> wrote:
> 
> > +       panel1: panel-lcd {
> > +               compatible = "sgd,gktw70sdad1sd";
> > +
> > +               backlight = <&backlight_lcd>;
> > +               power-supply = <&reg_touch_3v3>;
> > +               label = "gktw70sdad1sd";
> > +
> > +               display-timing {
> 
> If you pass the compatible, then you don't need to add the
> display-timing in the device tree.

thx I`ll drop it

Best Regards,

Oliver
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 3d1ea0b..7a73b72 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -634,6 +634,7 @@  dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-tx6ul-0010.dtb \
 	imx6ul-tx6ul-0011.dtb \
 	imx6ul-tx6ul-mainboard.dtb \
+	imx6ul-var-6ulcustomboard.dtb \
 	imx6ull-14x14-evk.dtb \
 	imx6ull-colibri-eval-v3.dtb \
 	imx6ull-colibri-wifi-eval-v3.dtb \
diff --git a/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts b/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts
new file mode 100644
index 00000000..e647d22
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts
@@ -0,0 +1,270 @@ 
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Support for Variscite DART-6UL Module
+ *
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ * Copyright (C) 2015-2016 Variscite Ltd. - http://www.variscite.com
+ * Copyright (C) 2018-2021 Oliver Graute <oliver.graute@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx6ul-imx6ull-var-dart-common.dtsi"
+
+/ {
+	model = "Variscite i.MX6 UltraLite Carrier-board";
+	compatible = "variscite,6ulcustomboard", "fsl,imx6ul";
+
+	backlight_lcd: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 20000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		user {
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		d16-led {
+			gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel1: panel-lcd {
+		compatible = "sgd,gktw70sdad1sd";
+
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_touch_3v3>;
+		label = "gktw70sdad1sd";
+
+		display-timing {
+			/* clock-frequency = <29232000>; */
+			clock-frequency = <35000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			vsync-len = <48>;
+			vback-porch = <29>;
+			vfront-porch = <13>;
+			hsync-len = <3>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <0>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8731audio";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Jack",
+			"Microphone", "Mic Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "RHPOUT",
+			"Headphone Jack", "LHPOUT",
+			"LLINEIN", "Line Jack",
+			"RLINEIN", "Line Jack",
+			"MICIN", "Mic Bias",
+			"Mic Bias", "Mic Jack";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&wm8731>;
+			system-clock-frequency = <12288000>;
+		};
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	wm8731: audio-codec@1a {
+		compatible = "wlf,wm8731";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6UL_CLK_SAI2>;
+		clock-names = "mclk";
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <4 IRQ_TYPE_NONE>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		wakeup-source;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	status = "okay";
+
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00	0x17059
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif: lcdif {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x1b0b0
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__GPIO3_IO04		0x80000000
+		>;
+	};
+
+};