diff mbox series

[V6,10/10] remoteproc: imx_proc: enable virtio/mailbox

Message ID 1610444359-1857-11-git-send-email-peng.fan@nxp.com (mailing list archive)
State New, archived
Headers show
Series remoteproc: imx_rproc: support iMX8MQ/M | expand

Commit Message

Peng Fan Jan. 12, 2021, 9:39 a.m. UTC 
From: Peng Fan <peng.fan@nxp.com>

Use virtio/mailbox to build connection between Remote Proccessors
and Linux. Add work queue to handle incoming messages.

Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/remoteproc/imx_rproc.c | 115 ++++++++++++++++++++++++++++++++-
 1 file changed, 112 insertions(+), 3 deletions(-)

Comments

Mathieu Poirier Jan. 14, 2021, 9:36 p.m. UTC | #1 
On Tue, Jan 12, 2021 at 05:39:19PM +0800, peng.fan@nxp.com wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> Use virtio/mailbox to build connection between Remote Proccessors
> and Linux. Add work queue to handle incoming messages.
> 
> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/remoteproc/imx_rproc.c | 115 ++++++++++++++++++++++++++++++++-
>  1 file changed, 112 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index e62a53ee128e..812b077f1282 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -7,6 +7,7 @@
>  #include <linux/err.h>
>  #include <linux/interrupt.h>
>  #include <linux/kernel.h>
> +#include <linux/mailbox_client.h>
>  #include <linux/mfd/syscon.h>
>  #include <linux/module.h>
>  #include <linux/of_address.h>
> @@ -15,6 +16,9 @@
>  #include <linux/platform_device.h>
>  #include <linux/regmap.h>
>  #include <linux/remoteproc.h>
> +#include <linux/workqueue.h>
> +
> +#include "remoteproc_internal.h"
>  
>  #define IMX7D_SRC_SCR			0x0C
>  #define IMX7D_ENABLE_M4			BIT(3)
> @@ -86,6 +90,11 @@ struct imx_rproc {
>  	const struct imx_rproc_dcfg	*dcfg;
>  	struct imx_rproc_mem		mem[IMX7D_RPROC_MEM_MAX];
>  	struct clk			*clk;
> +	struct mbox_client		cl;
> +	struct mbox_chan		*tx_ch;
> +	struct mbox_chan		*rx_ch;
> +	struct work_struct		rproc_work;
> +	struct workqueue_struct		*workqueue;
>  };
>  
>  static const struct imx_rproc_att imx_rproc_att_imx8mq[] = {
> @@ -366,9 +375,33 @@ static int imx_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
>  	return 0;
>  }
>  
> +static void imx_rproc_kick(struct rproc *rproc, int vqid)
> +{
> +	struct imx_rproc *priv = rproc->priv;
> +	int err;
> +	__u32 mmsg;
> +
> +	if (!priv->tx_ch) {
> +		dev_err(priv->dev, "No initialized mbox tx channel\n");
> +		return;
> +	}
> +
> +	/*
> +	 * Send the index of the triggered virtqueue as the mu payload.
> +	 * Let remote processor know which virtqueue is used.
> +	 */
> +	mmsg = vqid << 16;
> +
> +	err = mbox_send_message(priv->tx_ch, (void *)&mmsg);
> +	if (err < 0)
> +		dev_err(priv->dev, "%s: failed (%d, err:%d)\n",
> +			__func__, vqid, err);
> +}
> +
>  static const struct rproc_ops imx_rproc_ops = {
>  	.start		= imx_rproc_start,
>  	.stop		= imx_rproc_stop,
> +	.kick		= imx_rproc_kick,
>  	.da_to_va       = imx_rproc_da_to_va,
>  	.load		= rproc_elf_load_segments,
>  	.parse_fw	= imx_rproc_parse_fw,
> @@ -444,6 +477,65 @@ static int imx_rproc_addr_init(struct imx_rproc *priv,
>  	return 0;
>  }
>  
> +static void imx_rproc_vq_work(struct work_struct *work)
> +{
> +	struct imx_rproc *priv = container_of(work, struct imx_rproc,
> +					      rproc_work);
> +
> +	rproc_vq_interrupt(priv->rproc, 0);
> +	rproc_vq_interrupt(priv->rproc, 1);
> +}
> +
> +static void imx_rproc_rx_callback(struct mbox_client *cl, void *msg)
> +{
> +	struct rproc *rproc = dev_get_drvdata(cl->dev);
> +	struct imx_rproc *priv = rproc->priv;
> +
> +	queue_work(priv->workqueue, &priv->rproc_work);
> +}
> +
> +static int imx_rproc_xtr_mbox_init(struct rproc *rproc)
> +{
> +	struct imx_rproc *priv = rproc->priv;
> +	struct device *dev = priv->dev;
> +	struct mbox_client *cl;
> +	int ret;
> +
> +	if (!of_get_property(dev->of_node, "mbox-names", NULL))
> +		return 0;
> +
> +	cl = &priv->cl;
> +	cl->dev = dev;
> +	cl->tx_block = true;
> +	cl->tx_tout = 100;
> +	cl->knows_txdone = false;
> +	cl->rx_callback = imx_rproc_rx_callback;
> +
> +	priv->tx_ch = mbox_request_channel_byname(cl, "tx");
> +	if (IS_ERR(priv->tx_ch)) {
> +		ret = PTR_ERR(priv->tx_ch);
> +		return dev_err_probe(cl->dev, PTR_ERR(priv->tx_ch),
> +				     "failed to request tx mailbox channel: %d\n", ret);

        	return dev_err_probe(cl->dev, ret,
				     "failed to request tx mailbox channel: %d\n", ret);
> +	}
> +
> +	priv->rx_ch = mbox_request_channel_byname(cl, "rx");
> +	if (IS_ERR(priv->rx_ch)) {
> +		mbox_free_channel(priv->tx_ch);
> +		return dev_err_probe(cl->dev, PTR_ERR(priv->rx_ch),
> +				     "failed to request mbox tx chan\n");

        	ret = PTR_ERR(priv->rx_ch);
		return dev_err_probe(cl->dev, ret,
				     "failed to request rx mailbox channel: %d\n", ret);

> +	}
> +
> +	return 0;
> +}
> +
> +static void imx_rproc_free_mbox(struct rproc *rproc)
> +{
> +	struct imx_rproc *priv = rproc->priv;
> +
> +	mbox_free_channel(priv->tx_ch);
> +	mbox_free_channel(priv->rx_ch);
> +}
> +
>  static int imx_rproc_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -481,18 +573,28 @@ static int imx_rproc_probe(struct platform_device *pdev)
>  	priv->dev = dev;
>  
>  	dev_set_drvdata(dev, rproc);
> +	priv->workqueue = create_workqueue(dev_name(dev));
> +	if (!priv->workqueue) {
> +		dev_err(dev, "cannot create workqueue\n");
> +		ret = -ENOMEM;
> +		goto err_put_rproc;
> +	}
> +
> +	ret = imx_rproc_xtr_mbox_init(rproc);
> +	if (ret)
> +		goto err_put_wkq;
>  
>  	ret = imx_rproc_addr_init(priv, pdev);
>  	if (ret) {
>  		dev_err(dev, "failed on imx_rproc_addr_init\n");
> -		goto err_put_rproc;
> +		goto err_put_mbox;
>  	}
>  
>  	priv->clk = devm_clk_get(dev, NULL);
>  	if (IS_ERR(priv->clk)) {
>  		dev_err(dev, "Failed to get clock\n");
>  		ret = PTR_ERR(priv->clk);
> -		goto err_put_rproc;
> +		goto err_put_mbox;
>  	}
>  
>  	/*
> @@ -502,9 +604,11 @@ static int imx_rproc_probe(struct platform_device *pdev)
>  	ret = clk_prepare_enable(priv->clk);
>  	if (ret) {
>  		dev_err(&rproc->dev, "Failed to enable clock\n");
> -		goto err_put_rproc;
> +		goto err_put_mbox;
>  	}
>  
> +	INIT_WORK(&(priv->rproc_work), imx_rproc_vq_work);
> +
>  	ret = rproc_add(rproc);
>  	if (ret) {
>  		dev_err(dev, "rproc_add failed\n");
> @@ -515,6 +619,10 @@ static int imx_rproc_probe(struct platform_device *pdev)
>  
>  err_put_clk:
>  	clk_disable_unprepare(priv->clk);
> +err_put_mbox:
> +	imx_rproc_free_mbox(rproc);
> +err_put_wkq:
> +	destroy_workqueue(priv->workqueue);
>  err_put_rproc:
>  	rproc_free(rproc);
>  
> @@ -527,6 +635,7 @@ static int imx_rproc_remove(struct platform_device *pdev)
>  	struct imx_rproc *priv = rproc->priv;
>  
>  	clk_disable_unprepare(priv->clk);
> +	imx_rproc_free_mbox(rproc);

Function rproc_del() needs to be called first so that rproc_shutdown() is
executed (because rproc->auto_boot is true).

Thanks,
Mathieu

>  	rproc_del(rproc);
>  	rproc_free(rproc);
>  
> -- 
> 2.28.0
>
Peng Fan Jan. 15, 2021, 3:27 a.m. UTC | #2 
> Subject: Re: [PATCH V6 10/10] remoteproc: imx_proc: enable virtio/mailbox
> 
> On Tue, Jan 12, 2021 at 05:39:19PM +0800, peng.fan@nxp.com wrote:
> > From: Peng Fan <peng.fan@nxp.com>
> >
> > Use virtio/mailbox to build connection between Remote Proccessors and
> > Linux. Add work queue to handle incoming messages.
> >
> > Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
> > Signed-off-by: Peng Fan <peng.fan@nxp.com>
> > ---
> >  drivers/remoteproc/imx_rproc.c | 115
> > ++++++++++++++++++++++++++++++++-
> >  1 file changed, 112 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/remoteproc/imx_rproc.c
> > b/drivers/remoteproc/imx_rproc.c index e62a53ee128e..812b077f1282
> > 100644
> > --- a/drivers/remoteproc/imx_rproc.c
> > +++ b/drivers/remoteproc/imx_rproc.c
> > @@ -7,6 +7,7 @@
> >  #include <linux/err.h>
> >  #include <linux/interrupt.h>
> >  #include <linux/kernel.h>
> > +#include <linux/mailbox_client.h>
> >  #include <linux/mfd/syscon.h>
> >  #include <linux/module.h>
> >  #include <linux/of_address.h>
> > @@ -15,6 +16,9 @@
> >  #include <linux/platform_device.h>
> >  #include <linux/regmap.h>
> >  #include <linux/remoteproc.h>
> > +#include <linux/workqueue.h>
> > +
> > +#include "remoteproc_internal.h"
> >
> >  #define IMX7D_SRC_SCR			0x0C
> >  #define IMX7D_ENABLE_M4			BIT(3)
> > @@ -86,6 +90,11 @@ struct imx_rproc {
> >  	const struct imx_rproc_dcfg	*dcfg;
> >  	struct imx_rproc_mem		mem[IMX7D_RPROC_MEM_MAX];
> >  	struct clk			*clk;
> > +	struct mbox_client		cl;
> > +	struct mbox_chan		*tx_ch;
> > +	struct mbox_chan		*rx_ch;
> > +	struct work_struct		rproc_work;
> > +	struct workqueue_struct		*workqueue;
> >  };
> >
> >  static const struct imx_rproc_att imx_rproc_att_imx8mq[] = { @@
> > -366,9 +375,33 @@ static int imx_rproc_parse_fw(struct rproc *rproc,
> const struct firmware *fw)
> >  	return 0;
> >  }
> >
> > +static void imx_rproc_kick(struct rproc *rproc, int vqid) {
> > +	struct imx_rproc *priv = rproc->priv;
> > +	int err;
> > +	__u32 mmsg;
> > +
> > +	if (!priv->tx_ch) {
> > +		dev_err(priv->dev, "No initialized mbox tx channel\n");
> > +		return;
> > +	}
> > +
> > +	/*
> > +	 * Send the index of the triggered virtqueue as the mu payload.
> > +	 * Let remote processor know which virtqueue is used.
> > +	 */
> > +	mmsg = vqid << 16;
> > +
> > +	err = mbox_send_message(priv->tx_ch, (void *)&mmsg);
> > +	if (err < 0)
> > +		dev_err(priv->dev, "%s: failed (%d, err:%d)\n",
> > +			__func__, vqid, err);
> > +}
> > +
> >  static const struct rproc_ops imx_rproc_ops = {
> >  	.start		= imx_rproc_start,
> >  	.stop		= imx_rproc_stop,
> > +	.kick		= imx_rproc_kick,
> >  	.da_to_va       = imx_rproc_da_to_va,
> >  	.load		= rproc_elf_load_segments,
> >  	.parse_fw	= imx_rproc_parse_fw,
> > @@ -444,6 +477,65 @@ static int imx_rproc_addr_init(struct imx_rproc
> *priv,
> >  	return 0;
> >  }
> >
> > +static void imx_rproc_vq_work(struct work_struct *work) {
> > +	struct imx_rproc *priv = container_of(work, struct imx_rproc,
> > +					      rproc_work);
> > +
> > +	rproc_vq_interrupt(priv->rproc, 0);
> > +	rproc_vq_interrupt(priv->rproc, 1);
> > +}
> > +
> > +static void imx_rproc_rx_callback(struct mbox_client *cl, void *msg)
> > +{
> > +	struct rproc *rproc = dev_get_drvdata(cl->dev);
> > +	struct imx_rproc *priv = rproc->priv;
> > +
> > +	queue_work(priv->workqueue, &priv->rproc_work); }
> > +
> > +static int imx_rproc_xtr_mbox_init(struct rproc *rproc) {
> > +	struct imx_rproc *priv = rproc->priv;
> > +	struct device *dev = priv->dev;
> > +	struct mbox_client *cl;
> > +	int ret;
> > +
> > +	if (!of_get_property(dev->of_node, "mbox-names", NULL))
> > +		return 0;
> > +
> > +	cl = &priv->cl;
> > +	cl->dev = dev;
> > +	cl->tx_block = true;
> > +	cl->tx_tout = 100;
> > +	cl->knows_txdone = false;
> > +	cl->rx_callback = imx_rproc_rx_callback;
> > +
> > +	priv->tx_ch = mbox_request_channel_byname(cl, "tx");
> > +	if (IS_ERR(priv->tx_ch)) {
> > +		ret = PTR_ERR(priv->tx_ch);
> > +		return dev_err_probe(cl->dev, PTR_ERR(priv->tx_ch),
> > +				     "failed to request tx mailbox channel: %d\n", ret);
> 
>         	return dev_err_probe(cl->dev, ret,
> 				     "failed to request tx mailbox channel: %d\n", ret);
> > +	}
> > +
> > +	priv->rx_ch = mbox_request_channel_byname(cl, "rx");
> > +	if (IS_ERR(priv->rx_ch)) {
> > +		mbox_free_channel(priv->tx_ch);
> > +		return dev_err_probe(cl->dev, PTR_ERR(priv->rx_ch),
> > +				     "failed to request mbox tx chan\n");
> 
>         	ret = PTR_ERR(priv->rx_ch);
> 		return dev_err_probe(cl->dev, ret,
> 				     "failed to request rx mailbox channel: %d\n", ret);
> 
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static void imx_rproc_free_mbox(struct rproc *rproc) {
> > +	struct imx_rproc *priv = rproc->priv;
> > +
> > +	mbox_free_channel(priv->tx_ch);
> > +	mbox_free_channel(priv->rx_ch);
> > +}
> > +
> >  static int imx_rproc_probe(struct platform_device *pdev)  {
> >  	struct device *dev = &pdev->dev;
> > @@ -481,18 +573,28 @@ static int imx_rproc_probe(struct
> platform_device *pdev)
> >  	priv->dev = dev;
> >
> >  	dev_set_drvdata(dev, rproc);
> > +	priv->workqueue = create_workqueue(dev_name(dev));
> > +	if (!priv->workqueue) {
> > +		dev_err(dev, "cannot create workqueue\n");
> > +		ret = -ENOMEM;
> > +		goto err_put_rproc;
> > +	}
> > +
> > +	ret = imx_rproc_xtr_mbox_init(rproc);
> > +	if (ret)
> > +		goto err_put_wkq;
> >
> >  	ret = imx_rproc_addr_init(priv, pdev);
> >  	if (ret) {
> >  		dev_err(dev, "failed on imx_rproc_addr_init\n");
> > -		goto err_put_rproc;
> > +		goto err_put_mbox;
> >  	}
> >
> >  	priv->clk = devm_clk_get(dev, NULL);
> >  	if (IS_ERR(priv->clk)) {
> >  		dev_err(dev, "Failed to get clock\n");
> >  		ret = PTR_ERR(priv->clk);
> > -		goto err_put_rproc;
> > +		goto err_put_mbox;
> >  	}
> >
> >  	/*
> > @@ -502,9 +604,11 @@ static int imx_rproc_probe(struct platform_device
> *pdev)
> >  	ret = clk_prepare_enable(priv->clk);
> >  	if (ret) {
> >  		dev_err(&rproc->dev, "Failed to enable clock\n");
> > -		goto err_put_rproc;
> > +		goto err_put_mbox;
> >  	}
> >
> > +	INIT_WORK(&(priv->rproc_work), imx_rproc_vq_work);
> > +
> >  	ret = rproc_add(rproc);
> >  	if (ret) {
> >  		dev_err(dev, "rproc_add failed\n"); @@ -515,6 +619,10 @@ static
> int
> > imx_rproc_probe(struct platform_device *pdev)
> >
> >  err_put_clk:
> >  	clk_disable_unprepare(priv->clk);
> > +err_put_mbox:
> > +	imx_rproc_free_mbox(rproc);
> > +err_put_wkq:
> > +	destroy_workqueue(priv->workqueue);
> >  err_put_rproc:
> >  	rproc_free(rproc);
> >
> > @@ -527,6 +635,7 @@ static int imx_rproc_remove(struct platform_device
> *pdev)
> >  	struct imx_rproc *priv = rproc->priv;
> >
> >  	clk_disable_unprepare(priv->clk);
> > +	imx_rproc_free_mbox(rproc);
> 
> Function rproc_del() needs to be called first so that rproc_shutdown() is
> executed (because rproc->auto_boot is true).

Will fix it in next version.

Thanks,
Peng.

> 
> Thanks,
> Mathieu
> 
> >  	rproc_del(rproc);
> >  	rproc_free(rproc);
> >
> > --
> > 2.28.0
> >
diff mbox series

Patch

diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index e62a53ee128e..812b077f1282 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -7,6 +7,7 @@ 
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
+#include <linux/mailbox_client.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
@@ -15,6 +16,9 @@ 
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/remoteproc.h>
+#include <linux/workqueue.h>
+
+#include "remoteproc_internal.h"
 
 #define IMX7D_SRC_SCR			0x0C
 #define IMX7D_ENABLE_M4			BIT(3)
@@ -86,6 +90,11 @@  struct imx_rproc {
 	const struct imx_rproc_dcfg	*dcfg;
 	struct imx_rproc_mem		mem[IMX7D_RPROC_MEM_MAX];
 	struct clk			*clk;
+	struct mbox_client		cl;
+	struct mbox_chan		*tx_ch;
+	struct mbox_chan		*rx_ch;
+	struct work_struct		rproc_work;
+	struct workqueue_struct		*workqueue;
 };
 
 static const struct imx_rproc_att imx_rproc_att_imx8mq[] = {
@@ -366,9 +375,33 @@  static int imx_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
 	return 0;
 }
 
+static void imx_rproc_kick(struct rproc *rproc, int vqid)
+{
+	struct imx_rproc *priv = rproc->priv;
+	int err;
+	__u32 mmsg;
+
+	if (!priv->tx_ch) {
+		dev_err(priv->dev, "No initialized mbox tx channel\n");
+		return;
+	}
+
+	/*
+	 * Send the index of the triggered virtqueue as the mu payload.
+	 * Let remote processor know which virtqueue is used.
+	 */
+	mmsg = vqid << 16;
+
+	err = mbox_send_message(priv->tx_ch, (void *)&mmsg);
+	if (err < 0)
+		dev_err(priv->dev, "%s: failed (%d, err:%d)\n",
+			__func__, vqid, err);
+}
+
 static const struct rproc_ops imx_rproc_ops = {
 	.start		= imx_rproc_start,
 	.stop		= imx_rproc_stop,
+	.kick		= imx_rproc_kick,
 	.da_to_va       = imx_rproc_da_to_va,
 	.load		= rproc_elf_load_segments,
 	.parse_fw	= imx_rproc_parse_fw,
@@ -444,6 +477,65 @@  static int imx_rproc_addr_init(struct imx_rproc *priv,
 	return 0;
 }
 
+static void imx_rproc_vq_work(struct work_struct *work)
+{
+	struct imx_rproc *priv = container_of(work, struct imx_rproc,
+					      rproc_work);
+
+	rproc_vq_interrupt(priv->rproc, 0);
+	rproc_vq_interrupt(priv->rproc, 1);
+}
+
+static void imx_rproc_rx_callback(struct mbox_client *cl, void *msg)
+{
+	struct rproc *rproc = dev_get_drvdata(cl->dev);
+	struct imx_rproc *priv = rproc->priv;
+
+	queue_work(priv->workqueue, &priv->rproc_work);
+}
+
+static int imx_rproc_xtr_mbox_init(struct rproc *rproc)
+{
+	struct imx_rproc *priv = rproc->priv;
+	struct device *dev = priv->dev;
+	struct mbox_client *cl;
+	int ret;
+
+	if (!of_get_property(dev->of_node, "mbox-names", NULL))
+		return 0;
+
+	cl = &priv->cl;
+	cl->dev = dev;
+	cl->tx_block = true;
+	cl->tx_tout = 100;
+	cl->knows_txdone = false;
+	cl->rx_callback = imx_rproc_rx_callback;
+
+	priv->tx_ch = mbox_request_channel_byname(cl, "tx");
+	if (IS_ERR(priv->tx_ch)) {
+		ret = PTR_ERR(priv->tx_ch);
+		return dev_err_probe(cl->dev, PTR_ERR(priv->tx_ch),
+				     "failed to request tx mailbox channel: %d\n", ret);
+	}
+
+	priv->rx_ch = mbox_request_channel_byname(cl, "rx");
+	if (IS_ERR(priv->rx_ch)) {
+		mbox_free_channel(priv->tx_ch);
+		return dev_err_probe(cl->dev, PTR_ERR(priv->rx_ch),
+				     "failed to request mbox tx chan\n");
+	}
+
+	return 0;
+}
+
+static void imx_rproc_free_mbox(struct rproc *rproc)
+{
+	struct imx_rproc *priv = rproc->priv;
+
+	mbox_free_channel(priv->tx_ch);
+	mbox_free_channel(priv->rx_ch);
+}
+
 static int imx_rproc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -481,18 +573,28 @@  static int imx_rproc_probe(struct platform_device *pdev)
 	priv->dev = dev;
 
 	dev_set_drvdata(dev, rproc);
+	priv->workqueue = create_workqueue(dev_name(dev));
+	if (!priv->workqueue) {
+		dev_err(dev, "cannot create workqueue\n");
+		ret = -ENOMEM;
+		goto err_put_rproc;
+	}
+
+	ret = imx_rproc_xtr_mbox_init(rproc);
+	if (ret)
+		goto err_put_wkq;
 
 	ret = imx_rproc_addr_init(priv, pdev);
 	if (ret) {
 		dev_err(dev, "failed on imx_rproc_addr_init\n");
-		goto err_put_rproc;
+		goto err_put_mbox;
 	}
 
 	priv->clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(priv->clk)) {
 		dev_err(dev, "Failed to get clock\n");
 		ret = PTR_ERR(priv->clk);
-		goto err_put_rproc;
+		goto err_put_mbox;
 	}
 
 	/*
@@ -502,9 +604,11 @@  static int imx_rproc_probe(struct platform_device *pdev)
 	ret = clk_prepare_enable(priv->clk);
 	if (ret) {
 		dev_err(&rproc->dev, "Failed to enable clock\n");
-		goto err_put_rproc;
+		goto err_put_mbox;
 	}
 
+	INIT_WORK(&(priv->rproc_work), imx_rproc_vq_work);
+
 	ret = rproc_add(rproc);
 	if (ret) {
 		dev_err(dev, "rproc_add failed\n");
@@ -515,6 +619,10 @@  static int imx_rproc_probe(struct platform_device *pdev)
 
 err_put_clk:
 	clk_disable_unprepare(priv->clk);
+err_put_mbox:
+	imx_rproc_free_mbox(rproc);
+err_put_wkq:
+	destroy_workqueue(priv->workqueue);
 err_put_rproc:
 	rproc_free(rproc);
 
@@ -527,6 +635,7 @@  static int imx_rproc_remove(struct platform_device *pdev)
 	struct imx_rproc *priv = rproc->priv;
 
 	clk_disable_unprepare(priv->clk);
+	imx_rproc_free_mbox(rproc);
 	rproc_del(rproc);
 	rproc_free(rproc);