diff mbox series

[next,12/15] arm64: dts: mediatek: mt8183: fix dtbs_check warning

Message ID 20210116090656.11752-12-chunfeng.yun@mediatek.com (mailing list archive)
State Superseded
Headers show
Series [next,01/15] dt-bindings: usb: fix yamllint check warning | expand

Commit Message

Chunfeng Yun (云春峰) Jan. 16, 2021, 9:06 a.m. UTC
Harmonize node names, compatibles and properties.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8183.dtsi | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

Comments

Sergey Shtylyov Jan. 16, 2021, 9:43 a.m. UTC | #1
On 16.01.2021 12:06, Chunfeng Yun wrote:

> Harmonize node names, compatibles and properties.
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
>   arch/arm64/boot/dts/mediatek/mt8183.dtsi | 9 ++++-----
>   1 file changed, 4 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 5b782a4769e7..a69a033a68ac 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
[...]
> @@ -908,11 +908,11 @@
>   			status = "disabled";
>   		};
>   
> -		mipi_tx0: mipi-dphy@11e50000 {
> +		mipi_tx0: dsi-phy@11e50000 {

    Again, why not just "phy@..."?

[...]
> @@ -931,11 +931,10 @@
>   			};
>   		};
>   
> -		u3phy: usb-phy@11f40000 {
> +		u3phy: t-phy@11f40000 {

    Here as well...

[...]

MBR, Sergei
Nicolas Boichat Jan. 17, 2021, 1:58 a.m. UTC | #2
On Sat, Jan 16, 2021 at 5:07 PM Chunfeng Yun <chunfeng.yun@mediatek.com> wrote:
>
> Harmonize node names, compatibles and properties.
>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
>  arch/arm64/boot/dts/mediatek/mt8183.dtsi | 9 ++++-----
>  1 file changed, 4 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 5b782a4769e7..a69a033a68ac 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -865,7 +865,7 @@
>                         ranges;
>                         status = "disabled";
>
> -                       usb_host: xhci@11200000 {
> +                       usb_host: usb@11200000 {
>                                 compatible = "mediatek,mt8183-xhci",
>                                              "mediatek,mtk-xhci";
>                                 reg = <0 0x11200000 0 0x1000>;
> @@ -908,11 +908,11 @@
>                         status = "disabled";
>                 };
>
> -               mipi_tx0: mipi-dphy@11e50000 {
> +               mipi_tx0: dsi-phy@11e50000 {
>                         compatible = "mediatek,mt8183-mipi-tx";
>                         reg = <0 0x11e50000 0 0x1000>;
>                         clocks = <&apmixedsys CLK_APMIXED_MIPID0_26M>;
> -                       clock-names = "ref_clk";
> +                       clock-names = "ref";
>                         #clock-cells = <0>;
>                         #phy-cells = <0>;
>                         clock-output-names = "mipi_tx0_pll";

This is unrelated to USB, so this should probably be a separate patch.

> @@ -931,11 +931,10 @@
>                         };
>                 };
>
> -               u3phy: usb-phy@11f40000 {
> +               u3phy: t-phy@11f40000 {
>                         compatible = "mediatek,mt8183-tphy",
>                                      "mediatek,generic-tphy-v2";
>                         #address-cells = <1>;
> -                       #phy-cells = <1>;
>                         #size-cells = <1>;
>                         ranges = <0 0 0x11f40000 0x1000>;
>                         status = "okay";
> --
> 2.18.0
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
Nicolas Boichat Jan. 17, 2021, 5:42 a.m. UTC | #3
On Sun, Jan 17, 2021 at 9:58 AM Nicolas Boichat <drinkcat@chromium.org> wrote:
>
> On Sat, Jan 16, 2021 at 5:07 PM Chunfeng Yun <chunfeng.yun@mediatek.com> wrote:
> >
> > Harmonize node names, compatibles and properties.
> >
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> >  arch/arm64/boot/dts/mediatek/mt8183.dtsi | 9 ++++-----
> >  1 file changed, 4 insertions(+), 5 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > index 5b782a4769e7..a69a033a68ac 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > @@ -865,7 +865,7 @@
> >                         ranges;
> >                         status = "disabled";
> >
> > -                       usb_host: xhci@11200000 {
> > +                       usb_host: usb@11200000 {
> >                                 compatible = "mediatek,mt8183-xhci",
> >                                              "mediatek,mtk-xhci";
> >                                 reg = <0 0x11200000 0 0x1000>;
> > @@ -908,11 +908,11 @@
> >                         status = "disabled";
> >                 };
> >
> > -               mipi_tx0: mipi-dphy@11e50000 {
> > +               mipi_tx0: dsi-phy@11e50000 {
> >                         compatible = "mediatek,mt8183-mipi-tx";
> >                         reg = <0 0x11e50000 0 0x1000>;
> >                         clocks = <&apmixedsys CLK_APMIXED_MIPID0_26M>;
> > -                       clock-names = "ref_clk";
> > +                       clock-names = "ref";
> >                         #clock-cells = <0>;
> >                         #phy-cells = <0>;
> >                         clock-output-names = "mipi_tx0_pll";
>
> This is unrelated to USB, so this should probably be a separate patch.

Actually, after looking again at the complete stack of patches, I
think this might be ok as part of this overall cleanup (I'll let the
maintainer speak up).

>
> > @@ -931,11 +931,10 @@
> >                         };
> >                 };
> >
> > -               u3phy: usb-phy@11f40000 {
> > +               u3phy: t-phy@11f40000 {
> >                         compatible = "mediatek,mt8183-tphy",
> >                                      "mediatek,generic-tphy-v2";
> >                         #address-cells = <1>;
> > -                       #phy-cells = <1>;
> >                         #size-cells = <1>;
> >                         ranges = <0 0 0x11f40000 0x1000>;
> >                         status = "okay";
> > --
> > 2.18.0
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-mediatek
Chunfeng Yun (云春峰) Jan. 19, 2021, 2:55 a.m. UTC | #4
On Sat, 2021-01-16 at 12:43 +0300, Sergei Shtylyov wrote:
> On 16.01.2021 12:06, Chunfeng Yun wrote:
> 
> > Harmonize node names, compatibles and properties.
> > 
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> >   arch/arm64/boot/dts/mediatek/mt8183.dtsi | 9 ++++-----
> >   1 file changed, 4 insertions(+), 5 deletions(-)
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > index 5b782a4769e7..a69a033a68ac 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> [...]
> > @@ -908,11 +908,11 @@
> >   			status = "disabled";
> >   		};
> >   
> > -		mipi_tx0: mipi-dphy@11e50000 {
> > +		mipi_tx0: dsi-phy@11e50000 {
> 
>     Again, why not just "phy@..."?
This following the style as usb-phy, pcie-phy etc.
but is not yet a standard prefix for Display serial interface PHY

> 
> [...]
> > @@ -931,11 +931,10 @@
> >   			};
> >   		};
> >   
> > -		u3phy: usb-phy@11f40000 {
> > +		u3phy: t-phy@11f40000 {
> 
>     Here as well...
Already explain it in [11/15]
> 
> [...]
> 
> MBR, Sergei
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 5b782a4769e7..a69a033a68ac 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -865,7 +865,7 @@ 
 			ranges;
 			status = "disabled";
 
-			usb_host: xhci@11200000 {
+			usb_host: usb@11200000 {
 				compatible = "mediatek,mt8183-xhci",
 					     "mediatek,mtk-xhci";
 				reg = <0 0x11200000 0 0x1000>;
@@ -908,11 +908,11 @@ 
 			status = "disabled";
 		};
 
-		mipi_tx0: mipi-dphy@11e50000 {
+		mipi_tx0: dsi-phy@11e50000 {
 			compatible = "mediatek,mt8183-mipi-tx";
 			reg = <0 0x11e50000 0 0x1000>;
 			clocks = <&apmixedsys CLK_APMIXED_MIPID0_26M>;
-			clock-names = "ref_clk";
+			clock-names = "ref";
 			#clock-cells = <0>;
 			#phy-cells = <0>;
 			clock-output-names = "mipi_tx0_pll";
@@ -931,11 +931,10 @@ 
 			};
 		};
 
-		u3phy: usb-phy@11f40000 {
+		u3phy: t-phy@11f40000 {
 			compatible = "mediatek,mt8183-tphy",
 				     "mediatek,generic-tphy-v2";
 			#address-cells = <1>;
-			#phy-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0 0x11f40000 0x1000>;
 			status = "okay";