| Message ID | 20210121113904.1272852-1-vincent.knecht@mailoo.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2,1/2] dt-bindings: input/touchscreen: add bindings for msg26xx | expand |
On Thu, 21 Jan 2021 12:38:52 +0100, Vincent Knecht wrote: > This adds dts bindings for the mstar msg26xx touchscreen. > > Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> > --- > Changed in v2: > - changed M-Star to MStar in title line > - changed reset gpio to active-low in example section > --- > .../input/touchscreen/mstar,msg26xx.yaml | 66 +++++++++++++++++++ > 1 file changed, 66 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/mstar,msg26xx.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/mstar,msg26xx.example.dt.yaml: touchscreen@26: 'touchscreen-size-x', 'touchscreen-size-y' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/mstar,msg26xx.yaml See https://patchwork.ozlabs.org/patch/1429752 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/input/touchscreen/mstar,msg26xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg26xx.yaml new file mode 100644 index 000000000000..ddac0ce057c9 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg26xx.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/mstar,msg26xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MStar msg26xx touchscreen controller Bindings + +maintainers: + - Vincent Knecht <vincent.knecht@mailoo.org> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: mstar,msg26xx + + reg: + const: 0x26 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + vdd-supply: + description: Power supply regulator for the chip + + vddio-supply: + description: Power supply regulator for the I2C bus + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - reset-gpios + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@26 { + compatible = "mstar,msg26xx"; + reg = <0x26>; + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_active>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + }; + }; + +...
This adds dts bindings for the mstar msg26xx touchscreen. Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> --- Changed in v2: - changed M-Star to MStar in title line - changed reset gpio to active-low in example section --- .../input/touchscreen/mstar,msg26xx.yaml | 66 +++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/mstar,msg26xx.yaml