| Message ID | 20210122154300.7628-10-calvin.johnson@oss.nxp.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | ACPI support for dpaa2 driver | expand |
| Context | Check | Description |
|---|---|---|
| netdev/cover_letter | success | Link |
| netdev/fixes_present | success | Link |
| netdev/patch_count | success | Link |
| netdev/tree_selection | success | Clearly marked for net-next |
| netdev/subject_prefix | success | Link |
| netdev/cc_maintainers | warning | 1 maintainers not CCed: sakari.ailus@linux.intel.com |
| netdev/source_inline | success | Was 0 now: 0 |
| netdev/verify_signedoff | success | Link |
| netdev/module_param | success | Was 0 now: 0 |
| netdev/build_32bit | success | Errors and warnings before: 8773 this patch: 8773 |
| netdev/kdoc | success | Errors and warnings before: 5 this patch: 5 |
| netdev/verify_fixes | success | Link |
| netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 47 lines checked |
| netdev/build_allmodconfig_warn | success | Errors and warnings before: 8637 this patch: 8637 |
| netdev/header_inline | success | Link |
| netdev/stable | success | Stable not CCed |
On Fri, Jan 22, 2021 at 09:12:54PM +0530, Calvin Johnson wrote: > Using fwnode_get_id(), get the reg property value for DT node > or get the _ADR object value for ACPI node. ... > +/** > + * fwnode_get_id - Get the id of a fwnode. > + * @fwnode: firmware node > + * @id: id of the fwnode > + * > + * This function provides the id of a fwnode which can be either > + * DT or ACPI node. For ACPI, "reg" property value, if present will > + * be provided or else _ADR value will be provided. > + * Returns 0 on success or a negative errno. > + */ > +int fwnode_get_id(struct fwnode_handle *fwnode, u32 *id) > +{ > +#ifdef CONFIG_ACPI > + unsigned long long adr; > + acpi_status status; > +#endif Instead you may do... > + int ret; > + > + ret = fwnode_property_read_u32(fwnode, "reg", id); > + if (ret) { > +#ifdef CONFIG_ACPI ...it here like unsigned long long adr; acpi_status status; > + status = acpi_evaluate_integer(ACPI_HANDLE_FWNODE(fwnode), > + METHOD_NAME__ADR, NULL, &adr); > + if (ACPI_FAILURE(status)) > + return -EINVAL; > + *id = (u32)adr; > +#else > + return ret; > +#endif > + } > + return 0; > +}
On Fri, Jan 22, 2021 at 4:46 PM Calvin Johnson <calvin.johnson@oss.nxp.com> wrote: > > Using fwnode_get_id(), get the reg property value for DT node > or get the _ADR object value for ACPI node. So I'm not really sure if this is going to be generically useful. First of all, the meaning of the _ADR return value is specific to a given bus type (e.g. the PCI encoding of it is different from the I2C encoding of it) and it just happens to be matching the definition of the "reg" property for this particular binding. IOW, not everyone may expect the "reg" property and the _ADR return value to have the same encoding and belong to the same set of values, so maybe put this function somewhere closer to the code that's going to use it, because it seems to be kind of specific to this particular use case? > Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> > --- > > Changes in v4: > - Improve code structure to handle all cases > > Changes in v3: > - Modified to retrieve reg property value for ACPI as well > - Resolved compilation issue with CONFIG_ACPI = n > - Added more info into documentation > > Changes in v2: None > > drivers/base/property.c | 34 ++++++++++++++++++++++++++++++++++ > include/linux/property.h | 1 + > 2 files changed, 35 insertions(+) > > diff --git a/drivers/base/property.c b/drivers/base/property.c > index 35b95c6ac0c6..f0581bbf7a4b 100644 > --- a/drivers/base/property.c > +++ b/drivers/base/property.c > @@ -580,6 +580,40 @@ const char *fwnode_get_name_prefix(const struct fwnode_handle *fwnode) > return fwnode_call_ptr_op(fwnode, get_name_prefix); > } > > +/** > + * fwnode_get_id - Get the id of a fwnode. > + * @fwnode: firmware node > + * @id: id of the fwnode > + * > + * This function provides the id of a fwnode which can be either > + * DT or ACPI node. For ACPI, "reg" property value, if present will > + * be provided or else _ADR value will be provided. > + * Returns 0 on success or a negative errno. > + */ > +int fwnode_get_id(struct fwnode_handle *fwnode, u32 *id) > +{ > +#ifdef CONFIG_ACPI > + unsigned long long adr; > + acpi_status status; > +#endif > + int ret; > + > + ret = fwnode_property_read_u32(fwnode, "reg", id); > + if (ret) { > +#ifdef CONFIG_ACPI > + status = acpi_evaluate_integer(ACPI_HANDLE_FWNODE(fwnode), > + METHOD_NAME__ADR, NULL, &adr); > + if (ACPI_FAILURE(status)) > + return -EINVAL; > + *id = (u32)adr; > +#else > + return ret; > +#endif > + } > + return 0; > +} > +EXPORT_SYMBOL_GPL(fwnode_get_id); > + > /** > * fwnode_get_parent - Return parent firwmare node > * @fwnode: Firmware whose parent is retrieved > diff --git a/include/linux/property.h b/include/linux/property.h > index 0a9001fe7aea..3f41475f010b 100644 > --- a/include/linux/property.h > +++ b/include/linux/property.h > @@ -82,6 +82,7 @@ struct fwnode_handle *fwnode_find_reference(const struct fwnode_handle *fwnode, > > const char *fwnode_get_name(const struct fwnode_handle *fwnode); > const char *fwnode_get_name_prefix(const struct fwnode_handle *fwnode); > +int fwnode_get_id(struct fwnode_handle *fwnode, u32 *id); > struct fwnode_handle *fwnode_get_parent(const struct fwnode_handle *fwnode); > struct fwnode_handle *fwnode_get_next_parent( > struct fwnode_handle *fwnode); > -- > 2.17.1 >
On Fri, Jan 22, 2021 at 05:40:41PM +0100, Rafael J. Wysocki wrote: > On Fri, Jan 22, 2021 at 4:46 PM Calvin Johnson > <calvin.johnson@oss.nxp.com> wrote: > > > > Using fwnode_get_id(), get the reg property value for DT node > > or get the _ADR object value for ACPI node. > > So I'm not really sure if this is going to be generically useful. > > First of all, the meaning of the _ADR return value is specific to a > given bus type (e.g. the PCI encoding of it is different from the I2C > encoding of it) and it just happens to be matching the definition of > the "reg" property for this particular binding. > IOW, not everyone may expect the "reg" property and the _ADR return > value to have the same encoding and belong to the same set of values, I have counted three or even four attempts to open code exact this scenario in the past couple of years. And I have no idea where to put a common base for them so they will not duplicate this in each case. > so maybe put this function somewhere closer to the code that's going > to use it, because it seems to be kind of specific to this particular > use case?
On Fri, Jan 22, 2021 at 6:12 PM Andy Shevchenko <andy.shevchenko@gmail.com> wrote: > > On Fri, Jan 22, 2021 at 05:40:41PM +0100, Rafael J. Wysocki wrote: > > On Fri, Jan 22, 2021 at 4:46 PM Calvin Johnson > > <calvin.johnson@oss.nxp.com> wrote: > > > > > > Using fwnode_get_id(), get the reg property value for DT node > > > or get the _ADR object value for ACPI node. > > > > So I'm not really sure if this is going to be generically useful. > > > > First of all, the meaning of the _ADR return value is specific to a > > given bus type (e.g. the PCI encoding of it is different from the I2C > > encoding of it) and it just happens to be matching the definition of > > the "reg" property for this particular binding. > > > IOW, not everyone may expect the "reg" property and the _ADR return > > value to have the same encoding and belong to the same set of values, > > I have counted three or even four attempts to open code exact this scenario > in the past couple of years. And I have no idea where to put a common base for > them so they will not duplicate this in each case. In that case it makes sense to have it in the core, but calling the _ADR return value an "id" generically is a stretch to put it lightly. It may be better to call the function something like fwnode_get_local_bus_id() end explain in the kerneldoc comment that the return value provides a way to distinguish the given device from the other devices on the same bus segment. Otherwise it may cause people to expect that the "reg" property and _ADR are generally equivalent, which is not the case AFAICS. At least the kerneldoc should say something like "use only if it is known for a fact that the _ADR return value can be treated as a fallback replacement for the "reg" property that is missing in the given use case". > > so maybe put this function somewhere closer to the code that's going > > to use it, because it seems to be kind of specific to this particular > > use case?
On Fri, Jan 22, 2021 at 4:46 PM Calvin Johnson <calvin.johnson@oss.nxp.com> wrote: > > Using fwnode_get_id(), get the reg property value for DT node > or get the _ADR object value for ACPI node. > > Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> > --- > > Changes in v4: > - Improve code structure to handle all cases > > Changes in v3: > - Modified to retrieve reg property value for ACPI as well > - Resolved compilation issue with CONFIG_ACPI = n > - Added more info into documentation > > Changes in v2: None > > drivers/base/property.c | 34 ++++++++++++++++++++++++++++++++++ > include/linux/property.h | 1 + > 2 files changed, 35 insertions(+) > > diff --git a/drivers/base/property.c b/drivers/base/property.c > index 35b95c6ac0c6..f0581bbf7a4b 100644 > --- a/drivers/base/property.c > +++ b/drivers/base/property.c > @@ -580,6 +580,40 @@ const char *fwnode_get_name_prefix(const struct fwnode_handle *fwnode) > return fwnode_call_ptr_op(fwnode, get_name_prefix); > } > > +/** > + * fwnode_get_id - Get the id of a fwnode. > + * @fwnode: firmware node > + * @id: id of the fwnode > + * > + * This function provides the id of a fwnode which can be either > + * DT or ACPI node. For ACPI, "reg" property value, if present will > + * be provided or else _ADR value will be provided. > + * Returns 0 on success or a negative errno. > + */ > +int fwnode_get_id(struct fwnode_handle *fwnode, u32 *id) > +{ > +#ifdef CONFIG_ACPI > + unsigned long long adr; > + acpi_status status; > +#endif > + int ret; > + > + ret = fwnode_property_read_u32(fwnode, "reg", id); > + if (ret) { > +#ifdef CONFIG_ACPI > + status = acpi_evaluate_integer(ACPI_HANDLE_FWNODE(fwnode), > + METHOD_NAME__ADR, NULL, &adr); > + if (ACPI_FAILURE(status)) > + return -EINVAL; Please don't return -EINVAL from here, because this means "invalid argument" to the caller, but there may be nothing wrong with the fwnode and id pointers. I would return -ENODATA instead. > + *id = (u32)adr; > +#else > + return ret; > +#endif > + } > + return 0; > +} > +EXPORT_SYMBOL_GPL(fwnode_get_id); > + > /** > * fwnode_get_parent - Return parent firwmare node > * @fwnode: Firmware whose parent is retrieved > diff --git a/include/linux/property.h b/include/linux/property.h > index 0a9001fe7aea..3f41475f010b 100644 > --- a/include/linux/property.h > +++ b/include/linux/property.h > @@ -82,6 +82,7 @@ struct fwnode_handle *fwnode_find_reference(const struct fwnode_handle *fwnode, > > const char *fwnode_get_name(const struct fwnode_handle *fwnode); > const char *fwnode_get_name_prefix(const struct fwnode_handle *fwnode); > +int fwnode_get_id(struct fwnode_handle *fwnode, u32 *id); > struct fwnode_handle *fwnode_get_parent(const struct fwnode_handle *fwnode); > struct fwnode_handle *fwnode_get_next_parent( > struct fwnode_handle *fwnode); > -- > 2.17.1 >
On Fri, Jan 22, 2021 at 7:11 PM Rafael J. Wysocki <rafael@kernel.org> wrote: > > On Fri, Jan 22, 2021 at 6:12 PM Andy Shevchenko > <andy.shevchenko@gmail.com> wrote: > > > > On Fri, Jan 22, 2021 at 05:40:41PM +0100, Rafael J. Wysocki wrote: > > > On Fri, Jan 22, 2021 at 4:46 PM Calvin Johnson > > > <calvin.johnson@oss.nxp.com> wrote: > > > > > > > > Using fwnode_get_id(), get the reg property value for DT node > > > > or get the _ADR object value for ACPI node. > > > > > > So I'm not really sure if this is going to be generically useful. > > > > > > First of all, the meaning of the _ADR return value is specific to a > > > given bus type (e.g. the PCI encoding of it is different from the I2C > > > encoding of it) and it just happens to be matching the definition of > > > the "reg" property for this particular binding. > > > > > IOW, not everyone may expect the "reg" property and the _ADR return > > > value to have the same encoding and belong to the same set of values, > > > > I have counted three or even four attempts to open code exact this scenario > > in the past couple of years. And I have no idea where to put a common base for > > them so they will not duplicate this in each case. > > In that case it makes sense to have it in the core, but calling the > _ADR return value an "id" generically is a stretch to put it lightly. > > It may be better to call the function something like > fwnode_get_local_bus_id() Or fwnode_get_local_address() for that matter.
On Fri, Jan 22, 2021 at 7:13 PM Rafael J. Wysocki <rafael@kernel.org> wrote: > > On Fri, Jan 22, 2021 at 4:46 PM Calvin Johnson > <calvin.johnson@oss.nxp.com> wrote: > > > > Using fwnode_get_id(), get the reg property value for DT node > > or get the _ADR object value for ACPI node. This is not accurate AFAICS, because if the "reg" property is present in the ACPI case, it will be returned then too. > > > > Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> > > --- > > > > Changes in v4: > > - Improve code structure to handle all cases > > > > Changes in v3: > > - Modified to retrieve reg property value for ACPI as well > > - Resolved compilation issue with CONFIG_ACPI = n > > - Added more info into documentation > > > > Changes in v2: None > > > > drivers/base/property.c | 34 ++++++++++++++++++++++++++++++++++ > > include/linux/property.h | 1 + > > 2 files changed, 35 insertions(+) > > > > diff --git a/drivers/base/property.c b/drivers/base/property.c > > index 35b95c6ac0c6..f0581bbf7a4b 100644 > > --- a/drivers/base/property.c > > +++ b/drivers/base/property.c > > @@ -580,6 +580,40 @@ const char *fwnode_get_name_prefix(const struct fwnode_handle *fwnode) > > return fwnode_call_ptr_op(fwnode, get_name_prefix); > > } > > > > +/** > > + * fwnode_get_id - Get the id of a fwnode. > > + * @fwnode: firmware node > > + * @id: id of the fwnode > > + * > > + * This function provides the id of a fwnode which can be either > > + * DT or ACPI node. For ACPI, "reg" property value, if present will > > + * be provided or else _ADR value will be provided. > > + * Returns 0 on success or a negative errno. What about using the following description instead of the above: "Retrieve the value of the "reg" property for @fwnode which can be either DT or ACPI node. In the ACPI case, if the "reg" property is missing, evaluate the _ADR object located under the given node, if present, and provide its return value to the caller. Return 0 on success or a negative error code. This function can be used only if it is known valid to treat the _ADR return value as a fallback replacement for the value of the "reg" property that is missing in the given use case." > > + */ > > +int fwnode_get_id(struct fwnode_handle *fwnode, u32 *id) > > +{ > > +#ifdef CONFIG_ACPI > > + unsigned long long adr; > > + acpi_status status; > > +#endif > > + int ret; > > + > > + ret = fwnode_property_read_u32(fwnode, "reg", id); > > + if (ret) { > > +#ifdef CONFIG_ACPI > > + status = acpi_evaluate_integer(ACPI_HANDLE_FWNODE(fwnode), > > + METHOD_NAME__ADR, NULL, &adr); > > + if (ACPI_FAILURE(status)) > > + return -EINVAL; > > Please don't return -EINVAL from here, because this means "invalid > argument" to the caller, but there may be nothing wrong with the > fwnode and id pointers. > > I would return -ENODATA instead. > > > + *id = (u32)adr; > > +#else > > + return ret; > > +#endif > > + } > > + return 0; > > +} > > +EXPORT_SYMBOL_GPL(fwnode_get_id); > > + > > /** > > * fwnode_get_parent - Return parent firwmare node > > * @fwnode: Firmware whose parent is retrieved > > diff --git a/include/linux/property.h b/include/linux/property.h > > index 0a9001fe7aea..3f41475f010b 100644 > > --- a/include/linux/property.h > > +++ b/include/linux/property.h > > @@ -82,6 +82,7 @@ struct fwnode_handle *fwnode_find_reference(const struct fwnode_handle *fwnode, > > > > const char *fwnode_get_name(const struct fwnode_handle *fwnode); > > const char *fwnode_get_name_prefix(const struct fwnode_handle *fwnode); > > +int fwnode_get_id(struct fwnode_handle *fwnode, u32 *id); > > struct fwnode_handle *fwnode_get_parent(const struct fwnode_handle *fwnode); > > struct fwnode_handle *fwnode_get_next_parent( > > struct fwnode_handle *fwnode); > > -- > > 2.17.1 > >
diff --git a/drivers/base/property.c b/drivers/base/property.c index 35b95c6ac0c6..f0581bbf7a4b 100644 --- a/drivers/base/property.c +++ b/drivers/base/property.c @@ -580,6 +580,40 @@ const char *fwnode_get_name_prefix(const struct fwnode_handle *fwnode) return fwnode_call_ptr_op(fwnode, get_name_prefix); } +/** + * fwnode_get_id - Get the id of a fwnode. + * @fwnode: firmware node + * @id: id of the fwnode + * + * This function provides the id of a fwnode which can be either + * DT or ACPI node. For ACPI, "reg" property value, if present will + * be provided or else _ADR value will be provided. + * Returns 0 on success or a negative errno. + */ +int fwnode_get_id(struct fwnode_handle *fwnode, u32 *id) +{ +#ifdef CONFIG_ACPI + unsigned long long adr; + acpi_status status; +#endif + int ret; + + ret = fwnode_property_read_u32(fwnode, "reg", id); + if (ret) { +#ifdef CONFIG_ACPI + status = acpi_evaluate_integer(ACPI_HANDLE_FWNODE(fwnode), + METHOD_NAME__ADR, NULL, &adr); + if (ACPI_FAILURE(status)) + return -EINVAL; + *id = (u32)adr; +#else + return ret; +#endif + } + return 0; +} +EXPORT_SYMBOL_GPL(fwnode_get_id); + /** * fwnode_get_parent - Return parent firwmare node * @fwnode: Firmware whose parent is retrieved diff --git a/include/linux/property.h b/include/linux/property.h index 0a9001fe7aea..3f41475f010b 100644 --- a/include/linux/property.h +++ b/include/linux/property.h @@ -82,6 +82,7 @@ struct fwnode_handle *fwnode_find_reference(const struct fwnode_handle *fwnode, const char *fwnode_get_name(const struct fwnode_handle *fwnode); const char *fwnode_get_name_prefix(const struct fwnode_handle *fwnode); +int fwnode_get_id(struct fwnode_handle *fwnode, u32 *id); struct fwnode_handle *fwnode_get_parent(const struct fwnode_handle *fwnode); struct fwnode_handle *fwnode_get_next_parent( struct fwnode_handle *fwnode);
Using fwnode_get_id(), get the reg property value for DT node or get the _ADR object value for ACPI node. Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> --- Changes in v4: - Improve code structure to handle all cases Changes in v3: - Modified to retrieve reg property value for ACPI as well - Resolved compilation issue with CONFIG_ACPI = n - Added more info into documentation Changes in v2: None drivers/base/property.c | 34 ++++++++++++++++++++++++++++++++++ include/linux/property.h | 1 + 2 files changed, 35 insertions(+)