| Message ID | 20210120074706.23199-3-xiang.ye@intel.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | resolve read hystersis return invalid argument issue for hid sensors | expand |
On Wed, 20 Jan 2021 15:47:05 +0800 Ye Xiang <xiang.ye@intel.com> wrote: > Some hid sensors may use relative sensitivity such as als sensor. > This patch add relative sensitivity check for all hid-sensors. > > Signed-off-by: Ye Xiang <xiang.ye@intel.com> > --- > .../iio/common/hid-sensors/hid-sensor-attributes.c | 11 ++++++++++- > include/linux/hid-sensor-ids.h | 1 + > 2 files changed, 11 insertions(+), 1 deletion(-) > > diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c > index d349ace2e33f..b685c292a179 100644 > --- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c > +++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c > @@ -480,7 +480,7 @@ int hid_sensor_parse_common_attributes(struct hid_sensor_hub_device *hsdev, > > /* > * Set Sensitivity field ids, when there is no individual modifier, will > - * check absolute sensitivity of data field > + * check absolute sensitivity and relative sensitivity of data field > */ > for (i = 0; i < sensitivity_addresses_len && st->sensitivity.index < 0; i++) { > sensor_hub_input_get_attribute_info(hsdev, > @@ -488,6 +488,15 @@ int hid_sensor_parse_common_attributes(struct hid_sensor_hub_device *hsdev, > HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS | > sensitivity_addresses[i], > &st->sensitivity); > + > + if (st->sensitivity.index >= 0) > + break; > + > + sensor_hub_input_get_attribute_info(hsdev, > + HID_FEATURE_REPORT, usage_id, > + HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_REL_PCT | > + sensitivity_addresses[i], > + &st->sensitivity); We can't provide the value to userspace without reflecting the difference between the two ways of expressing it. It seems there are 3 ways sensitivity is expressed. 1. Raw value in same units as the measurement (easy one and what is currently reported) 2. Percentage of range - also relatively easy to transform into the same as 1. 3. Percentage of prior reading.. This one doesn't fit in any existing ABI, so unfortunately we'll have to invent something new along the lines of *_hysteresis_relative Jonathan > } > > st->raw_hystersis = -1; > diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid-sensor-ids.h > index 3bbdbccc5805..ac631159403a 100644 > --- a/include/linux/hid-sensor-ids.h > +++ b/include/linux/hid-sensor-ids.h > @@ -149,6 +149,7 @@ > /* Per data field properties */ > #define HID_USAGE_SENSOR_DATA_MOD_NONE 0x00 > #define HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS 0x1000 > +#define HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_REL_PCT 0xE000 > > /* Power state enumerations */ > #define HID_USAGE_SENSOR_PROP_POWER_STATE_UNDEFINED_ENUM 0x200850
On Sun, 2021-01-24 at 13:14 +0000, Jonathan Cameron wrote: > On Wed, 20 Jan 2021 15:47:05 +0800 > Ye Xiang <xiang.ye@intel.com> wrote: > > > Some hid sensors may use relative sensitivity such as als sensor. > > This patch add relative sensitivity check for all hid-sensors. > > > > Signed-off-by: Ye Xiang <xiang.ye@intel.com> > > --- > > .../iio/common/hid-sensors/hid-sensor-attributes.c | 11 > > ++++++++++- > > include/linux/hid-sensor-ids.h | 1 + > > 2 files changed, 11 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c > > b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c > > index d349ace2e33f..b685c292a179 100644 > > --- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c > > +++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c > > @@ -480,7 +480,7 @@ int hid_sensor_parse_common_attributes(struct > > hid_sensor_hub_device *hsdev, > > > > /* > > * Set Sensitivity field ids, when there is no individual > > modifier, will > > - * check absolute sensitivity of data field > > + * check absolute sensitivity and relative sensitivity of data > > field > > */ > > for (i = 0; i < sensitivity_addresses_len && st- > > >sensitivity.index < 0; i++) { > > sensor_hub_input_get_attribute_info(hsdev, > > @@ -488,6 +488,15 @@ int hid_sensor_parse_common_attributes(struct > > hid_sensor_hub_device *hsdev, > > HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSIT > > IVITY_ABS | > > sensitivity_addresses[i], > > &st->sensitivity); > > + > > + if (st->sensitivity.index >= 0) > > + break; > > + > > + sensor_hub_input_get_attribute_info(hsdev, > > + HID_FEATURE_REPORT, usage_id, > > + HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSIT > > IVITY_REL_PCT | > > + sensitivity_addresses[i], > > + &st->sensitivity); > > We can't provide the value to userspace without reflecting the > difference between > the two ways of expressing it. > > It seems there are 3 ways sensitivity is expressed. > 1. Raw value in same units as the measurement (easy one and what is > currently reported) > 2. Percentage of range - also relatively easy to transform into the > same as 1. > 3. Percentage of prior reading.. This one doesn't fit in any > existing ABI, so > unfortunately we'll have to invent something new along the lines > of > *_hysteresis_relative This is why it was not added before when I developed. But later few years back there was a patch to add this by one of our developer. There was some discussion, I thought it was decided it is OK to add. But I agree, we should add new ABI as you suggested. Now almost every laptop has HID sensors, better to address this. Thanks, Srinivas > Jonathan > > > > > } > > > > st->raw_hystersis = -1; > > diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid- > > sensor-ids.h > > index 3bbdbccc5805..ac631159403a 100644 > > --- a/include/linux/hid-sensor-ids.h > > +++ b/include/linux/hid-sensor-ids.h > > @@ -149,6 +149,7 @@ > > /* Per data field properties */ > > #define HID_USAGE_SENSOR_DATA_MOD_NONE > > 0x00 > > #define HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS > > 0x1000 > > +#define > > HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_REL_PCT 0xE > > 000 > > > > /* Power state enumerations */ > > #define HID_USAGE_SENSOR_PROP_POWER_STATE_UNDEFINED_ENUM 0x20085 > > 0
Hi Srinivas andd Jonathan Thanks for the review. On Sun, Jan 24, 2021 at 08:20:12AM -0800, Srinivas Pandruvada wrote: > On Sun, 2021-01-24 at 13:14 +0000, Jonathan Cameron wrote: > > On Wed, 20 Jan 2021 15:47:05 +0800 > > Ye Xiang <xiang.ye@intel.com> wrote: > > > > > Some hid sensors may use relative sensitivity such as als sensor. > > > This patch add relative sensitivity check for all hid-sensors. > > > > > > Signed-off-by: Ye Xiang <xiang.ye@intel.com> > > > --- > > > .../iio/common/hid-sensors/hid-sensor-attributes.c | 11 > > > ++++++++++- > > > include/linux/hid-sensor-ids.h | 1 + > > > 2 files changed, 11 insertions(+), 1 deletion(-) > > > > > > diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c > > > b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c > > > index d349ace2e33f..b685c292a179 100644 > > > --- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c > > > +++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c > > > @@ -480,7 +480,7 @@ int hid_sensor_parse_common_attributes(struct > > > hid_sensor_hub_device *hsdev, > > > > > > /* > > > * Set Sensitivity field ids, when there is no individual > > > modifier, will > > > - * check absolute sensitivity of data field > > > + * check absolute sensitivity and relative sensitivity of data > > > field > > > */ > > > for (i = 0; i < sensitivity_addresses_len && st- > > > >sensitivity.index < 0; i++) { > > > sensor_hub_input_get_attribute_info(hsdev, > > > @@ -488,6 +488,15 @@ int hid_sensor_parse_common_attributes(struct > > > hid_sensor_hub_device *hsdev, > > > HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSIT > > > IVITY_ABS | > > > sensitivity_addresses[i], > > > &st->sensitivity); > > > + > > > + if (st->sensitivity.index >= 0) > > > + break; > > > + > > > + sensor_hub_input_get_attribute_info(hsdev, > > > + HID_FEATURE_REPORT, usage_id, > > > + HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSIT > > > IVITY_REL_PCT | > > > + sensitivity_addresses[i], > > > + &st->sensitivity); > > > > We can't provide the value to userspace without reflecting the > > difference between > > the two ways of expressing it. > > > > It seems there are 3 ways sensitivity is expressed. > > 1. Raw value in same units as the measurement (easy one and what is > > currently reported) > > 2. Percentage of range - also relatively easy to transform into the > > same as 1. > > 3. Percentage of prior reading.. This one doesn't fit in any > > existing ABI, so > > unfortunately we'll have to invent something new along the lines > > of > > *_hysteresis_relative yes, the 3th version sensitivity (Percentage of prior reading) is what we are using for als sensor now. the 1th version sensitivity is common used by other hid sensors. Do you have suggestion or reference about how to add *_hysteresis_relative field to iio model? > > This is why it was not added before when I developed. But later few > years back there was a patch to add this by one of our developer. There > was some discussion, I thought it was decided it is OK to add. > > But I agree, we should add new ABI as you suggested. Now almost every > laptop has HID sensors, better to address this. > I think the add relative hystersis patch should be separated into a independent patch series, for it's a independent function and need more effort for coding and testing. And I can submit the other two patch in this patch series first. > > > > > > > > > } > > > > > > st->raw_hystersis = -1; > > > diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid- > > > sensor-ids.h > > > index 3bbdbccc5805..ac631159403a 100644 > > > --- a/include/linux/hid-sensor-ids.h > > > +++ b/include/linux/hid-sensor-ids.h > > > @@ -149,6 +149,7 @@ > > > /* Per data field properties */ > > > #define HID_USAGE_SENSOR_DATA_MOD_NONE > > > 0x00 > > > #define HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS > > > 0x1000 > > > +#define > > > HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_REL_PCT 0xE > > > 000 > > > > > > /* Power state enumerations */ > > > #define HID_USAGE_SENSOR_PROP_POWER_STATE_UNDEFINED_ENUM 0x20085 > > > 0 >
On Sun, 2021-01-31 at 11:26 +0000, Jonathan Cameron wrote: > On Fri, 29 Jan 2021 00:35:49 +0800 > "Ye, Xiang" <xiang.ye@intel.com> wrote: > > > Hi Srinivas andd Jonathan > > > > Thanks for the review. > > > > On Sun, Jan 24, 2021 at 08:20:12AM -0800, Srinivas Pandruvada > > wrote: > > > On Sun, 2021-01-24 at 13:14 +0000, Jonathan Cameron wrote: > > > > On Wed, 20 Jan 2021 15:47:05 +0800 > > > > Ye Xiang <xiang.ye@intel.com> wrote: > > > > > > > > > Some hid sensors may use relative sensitivity such as als > > > > > sensor. > > > > > This patch add relative sensitivity check for all hid- > > > > > sensors. > > > > > > > > > > Signed-off-by: Ye Xiang <xiang.ye@intel.com> > > > > > --- > > > > > .../iio/common/hid-sensors/hid-sensor-attributes.c | 11 > > > > > ++++++++++- > > > > > include/linux/hid-sensor-ids.h | 1 + > > > > > 2 files changed, 11 insertions(+), 1 deletion(-) > > > > > > > > > > diff --git a/drivers/iio/common/hid-sensors/hid-sensor- > > > > > attributes.c > > > > > b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c > > > > > index d349ace2e33f..b685c292a179 100644 > > > > > --- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c > > > > > +++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c > > > > > @@ -480,7 +480,7 @@ int > > > > > hid_sensor_parse_common_attributes(struct > > > > > hid_sensor_hub_device *hsdev, > > > > > > > > > > /* > > > > > * Set Sensitivity field ids, when there is no > > > > > individualsha512sum > > > > > modifier, will > > > > > - * check absolute sensitivity of data field > > > > > + * check absolute sensitivity and relative sensitivity > > > > > of data > > > > > field > > > > > */ > > > > > for (i = 0; i < sensitivity_addresses_len && st- > > > > > > sensitivity.index < 0; i++) { > > > > > sensor_hub_input_get_attribute_info(hsdev, > > > > > @@ -488,6 +488,15 @@ int > > > > > hid_sensor_parse_common_attributes(struct > > > > > hid_sensor_hub_device *hsdev, > > > > > HID_USAGE_SENSOR_DATA_MOD_CHANG > > > > > E_SENSIT > > > > > IVITY_ABS | > > > > > sensitivity_addresses[i > > > > > ], > > > > > &st->sensitivity); > > > > > + > > > > > + if (st->sensitivity.index >= 0) > > > > > + break; > > > > > + > > > > > + sensor_hub_input_get_attribute_info(hsdev, > > > > > + HID_FEATURE_REPORT, usage_id, > > > > > + HID_USAGE_SENSOR_DATA_MOD_CHANG > > > > > E_SENSIT > > > > > IVITY_REL_PCT | > > > > > + sensitivity_addresses[i > > > > > ], > > > > > + &st->sensitivity); > > > > > > > > We can't provide the value to userspace without reflecting the > > > > difference between > > > > the two ways of expressing it. > > > > > > > > It seems there are 3 ways sensitivity is expressed. > > > > 1. Raw value in same units as the measurement (easy one and > > > > what is > > > > currently reported) > > > > 2. Percentage of range - also relatively easy to transform into > > > > the > > > > same as 1. > > > > 3. Percentage of prior reading.. This one doesn't fit in any > > > > existing ABI, so > > > > unfortunately we'll have to invent something new along the > > > > lines > > > > of > > > > *_hysteresis_relative > > > > yes, the 3th version sensitivity (Percentage of prior reading) is > > what we > > are using for als sensor now. the 1th version sensitivity is common > > used > > by other hid sensors. Do you have suggestion or reference about > > how to add *_hysteresis_relative field to iio model? > > Follow through how elements of iio_chan_info_enum in > include/linux/iio/types.h are used and you should see how to add a > new > one (basically add an entry to that and also the string to the > right array in industrialio-core.c + document it in > Documentation/ABI/testing/sysfs-bus-iio. > > The issue with putting this in is we are going to be 'fixing' the ABI > for > that ALS sensor which is going to cause problems for any userspace > users > of that interface... I have no idea how commonly this is used, but it > is > possible we'll have to leave that one as incorrect :( Currently we don't have relative usage id treatment, So user space gets error in read/write for ALS. So I think it shouldn't be a problem. Thanks, Srinivas > > > > This is why it was not added before when I developed. But later > > > few > > > years back there was a patch to add this by one of our developer. > > > There > > > was some discussion, I thought it was decided it is OK to add. > > > > > > But I agree, we should add new ABI as you suggested. Now almost > > > every > > > laptop has HID sensors, better to address this. > > > > > > > I think the add relative hystersis patch should be separated into a > > independent > > patch series, for it's a independent function and need more effort > > for coding and > > testing. And I can submit the other two patch in this patch series > > first. > > Sure, if they are independent that should be fine. > > Thanks, > > Jonathan > > > > > > > > > > > > > > } > > > > > > > > > > st->raw_hystersis = -1; > > > > > diff --git a/include/linux/hid-sensor-ids.h > > > > > b/include/linux/hid- > > > > > sensor-ids.h > > > > > index 3bbdbccc5805..ac631159403a 100644 > > > > > --- a/include/linux/hid-sensor-ids.h > > > > > +++ b/include/linux/hid-sensor-ids.h > > > > > @@ -149,6 +149,7 @@ > > > > > /* Per data field properties */ > > > > > #define HID_USAGE_SENSOR_DATA_MOD_NONE > > > > > > > > > > 0x00 > > > > > #define HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS > > > > > > > > > > 0x1000 > > > > > +#define > > > > > HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_REL_PCT > > > > > 0xE > > > > > 000 > > > > > > > > > > /* Power state enumerations */ > > > > > #define HID_USAGE_SENSOR_PROP_POWER_STATE_UNDEFINED_ENUM > > > > > 0x20085 > > > > > 0 > > >
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c index d349ace2e33f..b685c292a179 100644 --- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c +++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c @@ -480,7 +480,7 @@ int hid_sensor_parse_common_attributes(struct hid_sensor_hub_device *hsdev, /* * Set Sensitivity field ids, when there is no individual modifier, will - * check absolute sensitivity of data field + * check absolute sensitivity and relative sensitivity of data field */ for (i = 0; i < sensitivity_addresses_len && st->sensitivity.index < 0; i++) { sensor_hub_input_get_attribute_info(hsdev, @@ -488,6 +488,15 @@ int hid_sensor_parse_common_attributes(struct hid_sensor_hub_device *hsdev, HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS | sensitivity_addresses[i], &st->sensitivity); + + if (st->sensitivity.index >= 0) + break; + + sensor_hub_input_get_attribute_info(hsdev, + HID_FEATURE_REPORT, usage_id, + HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_REL_PCT | + sensitivity_addresses[i], + &st->sensitivity); } st->raw_hystersis = -1; diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid-sensor-ids.h index 3bbdbccc5805..ac631159403a 100644 --- a/include/linux/hid-sensor-ids.h +++ b/include/linux/hid-sensor-ids.h @@ -149,6 +149,7 @@ /* Per data field properties */ #define HID_USAGE_SENSOR_DATA_MOD_NONE 0x00 #define HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS 0x1000 +#define HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_REL_PCT 0xE000 /* Power state enumerations */ #define HID_USAGE_SENSOR_PROP_POWER_STATE_UNDEFINED_ENUM 0x200850
Some hid sensors may use relative sensitivity such as als sensor. This patch add relative sensitivity check for all hid-sensors. Signed-off-by: Ye Xiang <xiang.ye@intel.com> --- .../iio/common/hid-sensors/hid-sensor-attributes.c | 11 ++++++++++- include/linux/hid-sensor-ids.h | 1 + 2 files changed, 11 insertions(+), 1 deletion(-)